Unable To Get Sound After Installing Fresh Copy Of OS?
Nov 5, 2009
i have an hp 532w, It came with windows xp home edition on it. recently I used a Dell version of Windows XP Pro and installed it over my hp home edition. I lost my sound and when I look at my device manager i see a little yellow flag by my multi media controller. If I try to Upgrade the driver I get the blue screen of death. I tried to reistall my origanial operating system, from my 8 recovery disks it won't let me. I trie booting from it and it won't let me. It sez I'm missing (windowsroot) system32hal.dll.
I'm having this problem with windows xp pro fresh install onto sata HD. Pressed F6 and installed sata drivers for the mobo etc. Now i hasten to add that i have tried this 3 times now, set up runs smoothly windows installs however when i have finished windows will only boot up with the CD in the CDROM. Been into Bios and changed boot sequence but still if no CD it just gets to boot from cd in the boot up screen and> stops, put the disk in and windows boots straight up and away we go.
m trying to format my old bros pc but when i just boot off the disk is just resumes the current installation of windows. We do not want the version as its old and we want to install sp3 which we bought yesterday. Also becuae we lost the cd key for the sp1 one and we cant find it anywhere and continue to get to windows then restart like a normal edition.
I'm currently using Acer Travelmate 650. I need to reinstall the windows as i'm passing my notebook to my friend. how i reinstall my windows as i don't have a cd-rom for install.
I have a six year old dell. old installation of Windows XP is damaged beyond repair so I will have to reinstall it.I have the dell serial number, service tag number, and most of the other relevant information. I even have the original Windows XP license key number printed on a label on the side of my computer.the one thing that I do not have is the Windows XP installation disk.What is the best way to resolve this?I have seen XP disks for sale on ebay craigslist. Can I purchase one of those and install it on my old computer? If I do that should I get a new license key from them or do I use my old one.
I recently had my XPS M1710(Windows XP Pro) swapped out for a M1730(VHP) and would like some assistance in getting rid of Vista and installing XP Pro onto the new system.
I need to install Windows XP on a laptop (Dell Latitude CPx H500GT) but I don't have the CD modular drive for it.How do I install XP with no built-in CD-ROM drive? The only other options I have is a ethernet PC card, one USB port and I do have a USB enclosure (for use with 3.5 hard drives or 5.25 cd/dvd drives)
computer started to run very poorly: lagging, freezing up, windows end task etc finnaly one day it would not go into desktop. would only give option to start in normal mode or safe mode. so i tried starting in both but would only restart into the same option screen.I decided it was best to format harddrive and reload windows. insert windows disk and proceeded to format partition and reinstall windows. it formats all that way to 90 % and then states cannot format partition further, harddrive problems and to trouble shoot manual. tried quick format and repair but still nothing.tried restarting without reinstall disk. says cant access OS of course!
I have been trying to clen up an old computer to give away. It is a 2002-vintage desktop with 512MB ram. I tried several times to reformat and reinstall xp, but I have only succeeded in removing the operating system and reformating both the hard drives. I have the OEM xp disk that came with it but I have tried 15 times to install xp and I can't. Is there anything I can do to fix this?
ive been trying to reinstall windows on my pc, it will do everything fine until it starts to instal, it will get to about 50% threw the devices then it wont do annything after that, ive tryed everything i can think of to undo the installation but cant get it to work, is there something if missed for it to install correctly? if not can you tell me how to undo the new installation as its useless at the moment
I have a HP laptop that once ran on Vista. This summer before I left for college,I decided that it was finally time to downgrade to XP,seeing as I had backed up everything, and classes would be starting in a week.So I did the usual thing. Insert CD, restart computer,"A problem has been detected, and Windows has shut down...."Blue Screen of Death. The Stop Message: 0x0000007B (0xF78D254, 0x00000034,0x00000000,0x00000000)
My hard drive recently crashed and I reinstalled windows xp, the copy i brought with the product key turns out to me fake or blacklisted by Microsoft, the problem is i scanned the disc used for installation and it contain more than a few adware programs and viruses. My PC is operating noticeably slower than before the crash, I scanned my RAM with MemTest. There is also a couple adware programs that comes up in processes, only bitdefender blocks it from popping up when using the internet. Also my Primary IDE channel is using PIO Mode instead of DMA, ive heard this can be because of viruses, should I reinstall windows?Could this mean the windows has been modified and what should i do?
I upgraded from Windows 98 to Windows XP and now no sound work on my computer.I get this message when i try play songs through Winamp"Bad DirectSound Driver. Please install proper drivers or select another device in configuration. Error code: 8878000A"
So I just rebuilt my PC, installed XP Home edition and installed the SP2 upgrade. I also installed some basic programs such as Norton Anti-Virus, Spybot, Ad-Aware, and Windows Defender. Since this is a fresh copy, you would think no problems right? Well, for some reason, this operating system just freezes everytime I'm trying to either install updates and other programs. It even freezes sometimes after its booted into the OS! There's no spyware or viruses, so I'm thinking it has to do with the SP2 install. I'm also dual booting with Windows XP Professional x64 Edition, which is running fine with no problems. I'm thinking about uninstalling SP2 if this solves the problem.
its a brand new computer and only a month old. Windows XP Professional keeps on restarting itself for no reason. I tried to get into safe mode but it also restarts the computer before the OS can be loaded. It's the main business computer that keeps all my employee numbers and payroll accounts. Is there a way to reformat the computer without losing my precious data?
I recently upgraded my laptop from XP Home to XP Pro. But, I absent-mindedly started to install by booting from the CD like I was doing a fresh install/reformat rather than doing it from inside the OS to do an upgrade. I caught myself, however and restarted without the CD and upgraded Windows from inside Windows. It worked, but now when I boot my computer, it gives me two options to choose from: "Windows XP Home Edition" or "Windows XP Professional Setup." When I pick the Home option, the computer boots up fine and goes to Windows.
However, when I go to Start>Control Panel>System, it shows that I have XP Pro even though I chose the XP Home option at boot. If I choose the XP Pro Setup option, it asks for the SP2 CD, even though the OS is bundled with SP2 on the same CD. I hit Enter, and it keeps asking for the SP2 CD even though the CD is in there. I tried to go to the Disk Management screen and delete the XP Pro Setup partition (which was only 1Gb), but that didn't work. So, I figured that boot.ini was still confused as to what to boot to.
I've been getting a lot of BSOD on my XP notebook (P4 3ghz, 784 ram). Sometimes it will say an ACPI.sys error, or a Bad Pool Caller, etc.I've done some looking and it seems it's a bad driver (well, other posts say that). How do you go about finding which driver it is? There's gotta be 100s of them.....
I had to format the hard drive and reload XP SP2.Seems to be working fine.But, my USB ports don't work. Do I have a driver problem, and if so, what is the fix.
Regularly played games are running slower than usual, have had one crash from, apparently, being too stressful on the machine (CTD).Sometimes it holds steady and plays well enough... Battlefield 2 is where I notice the significant performance loss and where I benchmark my machine.Think I am missing a driver? Can I find out what driver I am missing? Device Manager doesn't show anything to the contrary. I've installed drivers from the MSI site(4in1 setup), ati/amd drivers for video card, netgear lan drivers.
What would be the procedure for me to change from Windows XP to Windows 2000? Does XP have to be uninstalled or can I install 2000 without that requirement? Someone told me that I could just install 2000 and, that, in effect, would override XP. But, I don't want to goof something up so I thought I had better check with the experts here first.
I have a new computer, AMD Athlon 64 4200, Asus M2n-X motherboard, 2gb ram. Fresh install of Windows XP with Service Pack 2.My first account, the admin account, has sound.When I add a second account, also with admin privleges, it has not sound?
Well, I just recently installed XP clean on a friends computer, and While doing so I had no speakers connected to the computer. Then after, I plugged them in and get no sound. In the device manager under the legacy audio cards and codecs, it says "This device is working properly", but through the control panel under sounds and audio devices, it says there are no audio devices detected.
Did a fresh install of xp sp2, sp3Sound device not detected or listed.Went to dell dounloaded all drivers and installed Service tag JC3XDH1 Tried uninstalling and reinstalling to no avail Still nothing, Help
I recently did a fresh install of Windows XP on on my laptop and since then I haven't been able to get sound working. Almost all drivers have been installed and Device manager tells me they are working just fine. My audio one is a Sigmatel driver, if that matters much ... but there's 5 others listed under "sound, video, and game controllers."Almost all drivers, as I said, the ones below I didn't install for various reasons:
* Sony Visual Communication Camera Driver -- It is actually installed, just disabled because it gives shutdown issues.
ve just reinstalled the operating system on my pc as it was running very slow and kept hangin,all is working fine but i now have no sound through my speakers at all,and cannot find the drivers disk for my motherboard how can i get my sound back
Basically the first time I tried installing windows (pro sp2 from my alienware) I used the floppy set and I got through to the installation screen just fine but it wouldnt read the disk in the drive. So I thought it may have been my disk. I tried 3 other disks ( 2 different burned disks and an authentic windows pro sp 2 disk) none of them worked. So now I figured that it may have been the driver for my dvd burner drive. So I tried using a boot disk with some generic drivers on it. First I tried loading a win98 boot disk which did not work. Then I tried an XP boot disk with some drivers and that didnt work. (what I mean when I say it didnt work is that when I tried installing off the three different disks in conjunction with the setup floppies) Then I tried using a 95 boot disk and still, nothing happens. Except now im having even bigger problems. I cant even boot floppies anymore. It seems like any or all the drivers I got from the boot disks completely ****ed up my system and im unable to do anything at all.
I have a friend who has a pentium 2 350 which is currently running on Windows 98SE...yikes!My friend has been complaining that their computer has been running slow and that pop ups are appearing everywhere. I told them that it sounds like their computer has been hijacked and that I would recommend that they format their computer and start from fresh.I want to format their computer and install a newer windows OS (perhaps windows xp) and install a couple of spyware/antivirus programs.
Just frankensteined together a machine for my buddy's printing business. He provided his own (legal) copy of Win2K Professional. I had a real hard time getting Windows installed on this machine (probably due to the integrity of the install CD). I finally got it up and running to the point where I was able to set the clock and region, etc. But, upon reboot, I got the logon screen. When I installed windows, I did not set a user name and password. However, no matter what I type in (including leaving these fields blank) it will not let me log in. I have never experienced this with a fresh install before and I am at quite a loss as how to resolve this problem. I checked the install CD for the file WINNT.SIF (not sure if this file would exist on a Win2K slipstreamed CD) but could not find it. The only .SIF file I could find was TXTSETUP.SIF which did not seem to contain a default password for an unattended installation.
