Dual Boot Loops Playing Start Up Sound After Cloning Drive
Apr 5, 2007
I have successfully cloned my primary c partition of a dual boot system with XP Pro on the 1st primary partition c: and XP Pro on the 2nd primary partition as d: I can boot into my XP on the c: drive with no problem, but when I attempt to boot into my XP on the D drive it hangs on the blue screen right before booting into the user profiles. And believe it or not it continuously loops making the windows startup sound and the shutdown sound. It does the same in safe mode. I will try to explain the process on what I did so it can help you experts figure out this dilemma
View 3 Replies
ADVERTISEMENT
Apr 3, 2007
I have successfully cloned my primary c partition of a dual boot system with XP Pro on the 1st primary partition c: and XP Pro on the 2nd primary partition as d: I can boot into my XP on the c: drive with no problem, but when I attempt to boot into my XP on the D drive it hangs on the blue screen right before booting into the user profiles. And believe it or not it continuously loops making the windows startup sound and the shutdown sound. It does the same in safe mode. I will try to explain the process on what I did so it can help you experts figure out this dilemma that I'm having. My old drive an IDE 100GB IBM primary drive was partitioned into 3 parts:
c: 30GB FAT32 primary
d: 30GB FAT32 "
e: 30gb FAT32 "
All ran great in XP's on c: ,D: and :e except that i was running out of room in all the partitions and the drive is getting very old , I think (5yrs). I used XXClone Pro v.0.58.0 to clone my old c: and d: partitions to a WD IDE 160GB. I tried many other cloning proggys like Acronis True Image, Drive Clone, Paragon Drive Copy, Drive Image 2002, HDClone 3.1 Pro but they all either changed my new drive NTFS file system to FAT32 or made exact same size copies. I formatted and partitioned my new drive as follows:..............
View 2 Replies
View Related
Sep 27, 2009
System Restore problem I've been having.I did a system restore on my laptop and then got error messages when attempting to restore back to the present time) but as of just now I have a new, much more pressing problem. I restarted my laptop in safe mode an hour or so ago to attempt to do a system restore while in safe mode, just to see if that might work since I always get an error when trying to do a system restore normally.
The system restore loaded up and the blue progress bar got about 1/6th of the way across and then stopped. I let it load and after 45 minutes of absolutely no progress in starting up with the system restore, I manually shut down the computer. I turned it on again after a minute and it began to boot up, showed the HP logo, went black, then the Windows XP loading screen, went black, then the HP logo again, black again, Windows XP loading screen again, etc and just looped again and again. I let it continue this for about 15 minutes but it just kept looping. I pressed the F8 key while it was doing this and selected it to start in Safe Mode, only to have the same looping sequence continue again and again. I had to manually shut down the laptop again, and after attempting to turn it on and have it boot up a few more times I've run into nothing but more of the same endless looping process.
What can I do about this? What caused it and is there any way to fix it? I'd really like a way to access or save my data, which I can't do now since the computer is doing nothing but looping the boot sequence. i have Prof SP2
View 3 Replies
View Related
May 25, 2004
I installed a Serial ATA hard drive. Booted from floppy,partitioned and formatted 120mb HD,with 2 partitions.
Connected my old IDE drive and booted from Norton Ghostdisc, cloned my old drive to the new one. Removed all drives and USB card readers except the new SATA drive. Windows will not fully boot, it halts at the blue Windows intro screen. Restarted Windows, and scandisk ran, but indicated drive letter "H" not "C", so I guess the windows installation is still looking in the original place for it's files, ie. the "C" drive, that's why it won't boot. You cannot change the "System" drive letter from "Computer Management" within XP, and I cannot get into Windows anyway. Is there a "work around" for this, other than a clean install? Even then, is it still going to be drive "H"? And that means another Windows activation. How many goes do you get for activation? I tried a windows repair installation, and reactivation (wasted). Windows then worked, sort of. Lots of things were missing and programs unuseable,as they were looking for their files on "C": so I went back to square 1, put my old drive back in for the moment
View 2 Replies
View Related
Apr 3, 2007
I have successfully cloned my primary c partition of a dual boot system with XP Pro on the 1st primary partition c: and XP Pro on the 2nd primary partition as d: I can boot into my XP on the c: drive with no problem, but when I attempt to boot into my XP on the D drive it hangs on the blue screen right before booting into the user profiles. And believe it or not it continuously loops making the windows startup sound and the shutdown sound. It does the same in safe mode.
I will try to explain the process on what I did so it can help you experts figure out this dilemma that I'm having.My old drive an IDE 100GB IBM primary drive was partitioned into 3 parts: c: 30GB FAT32 primary d: 30GB FAT32 " e: 30gb FAT32 "
View 11 Replies
View Related
Jan 31, 2005
After an entire weekend working on this project, I am beat. I have a client who has a Windows NT Server and is replacing a 4 GB SCSI hard drive with a 20 GB IDE. System sees the new drive. I have used Ghost to create the clone of the original drive from the 4 GB SCSI to the 20 GB IDE. That worked fine. However, after removing the SCSI drive to boot from the 20 GB IDE, I repeatedly obtain the STOP: 0x0000007B INACCESSIBLE_BOOT_DEVICE. I have been in contact with Symantec and they have not been of much help. I have seen the article from Microsoft regarding the error as well but have not had much luck.
My question is by chance, has anyone else experienced a similiar situation and what has been your resolution? I would be extremely grateful to anyone who may have an answer to this problem.
Thank you for any help you may provide. I have not seen a similiar thread here on this forum of a clone from a SCSI to an IDE.
View 11 Replies
View Related
Jan 12, 2009
I'm trying to dual boot 2 different installs of xp pro from 2 drives using the Windows boot loader. I've edited the boot.ini every possible way I can think of, but nothing works. I've done this plenty of times using a linux boot loader or dual booting from a single drive but I cant figure this out. I haven't been able to find any reference to this subject anywhere, but I think it would work. Anybody have a clue as to how to do this? I know I can use a different boot manager to accomplish this, I just wanted to make the Win boot.ini work. Or, does anybody know of a good boot manager if I cant make this work?
View 9 Replies
View Related
Dec 6, 2008
In need of some major help, whenever i load up my computer everything loads up fine untill i get to the status bar screen which just loops and loops over and over again and nothing happens from that point onwards not only that but it knocks out all my devices i.e keyboard, mouse etc. I can open it in safe mode no problem and in this i have done numerous system restores. If i leave my computer off or idle for about 12 hours it worls again after that but about 2-4 days later the problem happens again this has happened aprox 7 times now. I really need someones help as this is my main computer and i have everything on it
View 7 Replies
View Related
May 21, 2010
I have done some searching and it seems that other people who have had this problem, have been installing ubuntu. I havn't managed to come to a solution. I installed XP(1) onto drive 1 , then reorganised all of my partitions to be in the correct order with the correct labels (I have been having a nightmare with volumue labels being incorrect!). Anyways got all the partitions exactly how I want them using partition manager (i.e XP(1) on C: with the intention to install XP(2) on D. Rebooted machine, pressed a key to boot from CD, it says 'setup is inspecting your current configuration' and then the screen stays black (I have to reset the machine). I turned off the computer and dissconnected drive 2 (int.) and drive 3 (ext.). Problem still exists.
View 2 Replies
View Related
May 21, 2010
I installed XP(1) onto drive 1 , then reorganised all of my partitions to be in the correct order with the correct labels (I have been having a nightmare with volumue labels being incorrect!). Anyway got all the partitions exactly how I want them using partition manager (i.e XP(1) on C: with the intention to install XP(2) on D. Rebooted machine, pressed a key to boot from CD, it says 'setup is inspecting your current configuration' and then the screen stays black (I have to reset the machine). I turned off the computer and dissconnected drive 2 (int.) and drive 3 (ext.). Problem still exists. How do I boot to the blue setup screen for my second copy of XP?
View 4 Replies
View Related
Mar 8, 2006
I have a dual boot system (2 hard drives) booting Suse and XP and boot up through Suse's built in boot manager which gives me the option of booting to Windows or Linux. But since I barely ever use Linux I want to delete it off the 2nd drive so I can use it for a storage drive, so I'm wondering how to replace the Windows Master Boot Record so I can just boot into my XP drive. I'm scared that once I delete/reformat the contents of the 2nd hard drive (I'll probably use Partition Magic to do this through my XP drive) that I won't be able to boot XP up anymore. So before I do anything I want to just be able to boot into XP and bypass the linux drive before I delete it to make sure everything is ok.
View 2 Replies
View Related
Nov 26, 2009
I have a dual boot system with both having windows xp.When I load into the 1st XP installation, the following is the list and assignment of the drives:
C : Local Disk (contains the 1st XP installation)
D : CD Drive
E : Local Disk (contains data and also few installed program folders)
F : Local Disk (contains the 2nd XP installation)
Initially when I noticed this drive arrangement after setting up the dual boot, I just left it as is, not knowing what to do.But nowadays I am having a lot of problems as the installed programs are not accessible because their target location keeps changing, everytime I keep switching between the two operating systems.How can I solve this problem?Can I do the follwing : Load into the 1st XP installation, and then change the drive letters (of the last three drives) such that they are matching the drive assignment as seen when loading into the 2nd XP installation.Here in a way I have kept the same drive name for both installations.But Will this work?I also have some of the program folders for the 1st xp installation stored in E drive, and after changing it to D drive, will all the links be properly converted upon restart?
View 12 Replies
View Related
Sep 3, 2006
I recently cloned my 40 gig western digital hard drive over to a 160 gig Hitachi.I am running windows xp pro sp2.First I used Norton Ghost,when finished copying I switched hard drives,relocated the jumpers so the new one was set to master. I restarted my personal computer.It showed the hard drive and the 2 cd roms but my personal computer wouldn't boot.I then formatted the Hitachi and tried again with power quest Drive image,I got the same results.It shows my new hard drive configured Then I get the splash screen then just a blinking dot in the top left corner of my screen so I tried again with hard disk clone, still wouldn't boot to the hard disk. I then created a floppy boot disk which made it load up perfectly.I tried the f disk thing. I tried the R repair with the windows xp disk.to no avail.My hard drive will boot great if I use a boot disk but it won't boot to the hard drive on it's own.If I put the original hard drive in it boots up fine.I have a compaq presario 5000.I have tried everything I could think of and everything I could find searching the web.
View 14 Replies
View Related
Jul 23, 2009
I copied/cloned my failing C: to a drive on USB. C: drive has now failed and I need the copy to become bootable. Why can't this question be a simple answer.
What happened to fdisk utilities?
View 5 Replies
View Related
Jul 19, 2009
My main HD is about to give up. It's making strange noises whenever I start up or have a file on that drive open.Could I buy a new HD and install it as a slave drive. Then clone my main drive to the slave drive and then get rid of the old main drive and put the clone in as my new main drive? Without a lot of f***ing about?The reason I ask about doing it this way is that I don't have a set of XP disks, I just have the recovery disk that came with computers 8-10 years ago. It's pre sp1 and I've used it three or four times already and I'm sure it will be more hassle than I need to re install from it.I'm running XP sp2. When I had this comp put together they had to do a raid controller, I don't really know what that is. Something to do with the fact that the main drive is IDE only and my current second drive is IDE or Sata but is in place as an IDE drive.
View 8 Replies
View Related
Feb 5, 2007
I will be formatting my drive now and I want to install XP and Vista so that I can choose which one to load at the start of booting up. How would I do this? Do I need to create two partitions, install both operating systems on the separate drives and then done? Or is there more to it? Which operating system should I install first, if there is any difference
View 1 Replies
View Related
Jun 8, 2005
I have two hard drives, both of them with Win 2000 Pro. The First has been the master in machine one from the start. The second HDD has been in machine twoand that machine has crashed so bad that it is not worth the time, energy or money to fix it. This second HDD has important data on it that is only accessable through older programs that are only on this drive. (It is a church membership data base program and a church financial record program) I have the added problem that no one in the office has a clue where the install disk are for these programs and they are not where they are suppose to be (this was before my time). I would like to place the second HDD in the first machine and set up a dual boot so the user can choose which drive to operate from. There is the added problem that the computers only have a restore disk that came from Dell and not a full Win 2000 Pro CD.
View 4 Replies
View Related
Jan 12, 2008
I have a computer in which I have an XP dual boot on 2 separate hard drives (160 & 120 GB).I have had this particular combination in working order since 4/07. A few days ago my 2nd drive (F) would not boot. I get only a blank, black screen and nothing else NO error messages or warnings. My C drive will boot normally, no problems.The drive is "seen" in BIOS, startup and in my computer on the C drive. The drive is there but the darned thing just will not boot. I have tried using "fixboot" & "fixmbr" to no avail!
View 11 Replies
View Related
Sep 29, 2009
I'm running Windows XP and want to migrate to another hard drive. I used the excellent open source utility CloneZilla to clone my hard drive to the new drive, and used the equally excellent EASEUS Partition Master to resize the cloned partition to fill the new drive. Next I edited boot.ini on my original Windows to add the cloned drive as another boot option. After a bit of trial and error guessing the disk path for boot.ini I was able to dual boot into the original or the clone.
Now I want to boot off the new drive directly without dual booting off the original drive as I intend to wipe the old drive after I am satisfied that everything is working OK. But here's the catch: the original drive is SATA, while the new drive is IDE. So I can't simply swap the cables around and be done with it. So I configured the boot sequence in the bios to use "HDD-0" instead of "SCSI" (for some reason this old BIOS thinks SATA is SCSI) and restart. The system gets as far as detecting the boot source (floppy first, then CD-ROM) and then stops. No "operating system not found" or any other kind of error, just a blinking cursor and no activity.
I get exactly the same behavior using "HDD-1" to "HDD-3" as the boot drive in the bios. The bios detects the drive itself OK. I have also edited boot.ini on the new drive to point to the same location I used to add it to the dual boot menu on the original drive, but that didn't help. I also booted off the Windows installer, went into Recovery mode and ran Fixmbr and Fixboot with the original SATA drive unplugged and without specifying a device name.
View 7 Replies
View Related
Jul 26, 2005
Can anybody point me to the instructions about how to install XP Pro to a single Win98 hard drive - to make it dual boot, like Win 2k? I've been looking all around the internet and the only thing I've found is an XP dual boot on a 2nd hard drive.
View 14 Replies
View Related
Feb 22, 2007
I have Windows XP home edition already installed on my system and I for some reasons I want to reinstall them on a different hard drive (I have 2 IDE drives). It is very important that my initial windows setup, the one I am running on now, will be working after the new installation too. Is that possible?
View 5 Replies
View Related
Dec 29, 2005
I've upgraded to WMP10, I've downloaded the decoder checkup thingy, I also have ULEAD DVD player and get no sound. I've run and completed suggestions from XP's troubleshooter. Video plays fine-looks great...no sound.
View 11 Replies
View Related
Jan 3, 2008
Running Windows XP Media Center Edition Version 2002 Service Pack 2. Computer is a Dell Dimension 4600. The computer has a Samsung CDRW/DVD SM352F drive with SoundMax Integrated Digital Audio. I believe all this is a stock setup. When I put a DVD in the drive, it plays the video but there is no sound. I checked in Windows and it said the CD/DVD device is working correctly and the SoundMax is working correctly, too. The device works OK with data CDs and plays audio CDs OK as well. In Settings in Media Center for the DVD it says 2 speaker stereo is enabled with Vocal Options set to Both. I tried the DVD on another similarly configured computer and it didn't work there, either.
View 9 Replies
View Related
Feb 12, 2007
1. Whenever I play a game on my machine (such as Zuma, Rocket Mania), I get "system has encountered a problem" errors or blue screen crashes. There is no consistency in the errors that I or my husband can see.
I have:
1. downloaded and reinstalled Audio and Video drivers (many times), including reverting backwards
2. run disc clean, System Mechanics clutter clean, spybot, internet clean--if I do these and then boot, the games will run (sometimes).
3. deleted and physically relocated the page file (which is set to max--4096)
4. done full virus scan, registry clean, adscan---my machine is so clean it squeeks
2. Keyboard is freezing when I'm typing (either online or off--doesn't matter which program either). The display stops and I can keep typing. After maybe 10 seconds, the screen catches up. I have deleted and reinstalled my keyboard.
3. I have lost my system sound but have sound on all games (except one).
View 4 Replies
View Related
Mar 27, 2007
I am getting video, but its not playing the audio
View 8 Replies
View Related
Dec 7, 2007
I have a dell inspiron e1505 running vista that is about one year old. The sound skips every 30 secs or so whenever playing any kind of media. It appears the solution was found on a different forum however I have a problem with their answer and was hoping someone here could clear it up for me as I have had lots of luck here before Here is the thread from the other forum
View 6 Replies
View Related
Apr 7, 2007
I have a Toshiba laptop M115-S3094 Satellite with Windows Media It's less than a year old.In the beginning it ran great. Now I can't get any audio. I tried the Fan in Comcast, it plays the videos, but no sound. I tried a DVD. No sound. I ran the troubleshooter. No help. No music in Windows Media Player either.There are so many devices on this laptop. I do get the sound when windows opens and closes. I have had sound on the Fan video clips and Windows Media Center in the past. I recently completed the Window authenticity.
View 22 Replies
View Related
Dec 12, 2008
whenever i play anything with sound the audio is distorted and scratchy. i have no clue how to fix it...i have tried uninstalling and reinstalling the audio driver but that has not corrected the problem. as far as i know i am using a realtek audio driver thats built into my motherboard. i dont know if it matters but i am using a dell inspiron e1505.
View 5 Replies
View Related
Jan 22, 2008
My computer has recently started playing the System Notification sound that is defined as Windows XP Balloon.wav in the Sounds and Audio Device Properties at seemingly random intervels, and I cannot seem to find out what application is triggering the playing of this sound. I am sure it is this sound specifically as I changed it up and the change was reflected in the sound that was playing. I have also been checking the event viewer under Administrative tools and haven't noticed any events that correspond with the issue at hand. It's slowly driving me crazy! I have heard a ton of good stuff about your forums and thought I would give it a try.
View 10 Replies
View Related
Feb 2, 2006
I have a problem with playing video files. I can hear sound but no picture, no video. I'm using Windows XP home and I downloaded the latest codec for Window player and still won't work. I downloaded divx player and it won't work.. only sound.
View 3 Replies
View Related
Jun 28, 2010
I have been trying to install Windows XP as a second OS as I already have Windows 7 Ultimate installed. Unfortunately, after I select a partition, format it, and reboot the system stalls on the screen after the BIOS that has something to do with a list of devices and such. After 10 or so seconds a few characters and letters go blank randomly on the page. I rebooted and selected my cd drive as the boot device and accidentally didn't press a button in time to boot and a bunch of highlighted numbers were thrown all over the screen and a random smiley face on one of the lines.
View 12 Replies
View Related
