Don't Have A Set Of XP Disks / Cloning Main Drive
Jul 19, 2009
My main HD is about to give up. It's making strange noises whenever I start up or have a file on that drive open.Could I buy a new HD and install it as a slave drive. Then clone my main drive to the slave drive and then get rid of the old main drive and put the clone in as my new main drive? Without a lot of f***ing about?The reason I ask about doing it this way is that I don't have a set of XP disks, I just have the recovery disk that came with computers 8-10 years ago. It's pre sp1 and I've used it three or four times already and I'm sure it will be more hassle than I need to re install from it.I'm running XP sp2. When I had this comp put together they had to do a raid controller, I don't really know what that is. Something to do with the fact that the main drive is IDE only and my current second drive is IDE or Sata but is in place as an IDE drive.
View 8 Replies
ADVERTISEMENT
May 25, 2004
I installed a Serial ATA hard drive. Booted from floppy,partitioned and formatted 120mb HD,with 2 partitions.
Connected my old IDE drive and booted from Norton Ghostdisc, cloned my old drive to the new one. Removed all drives and USB card readers except the new SATA drive. Windows will not fully boot, it halts at the blue Windows intro screen. Restarted Windows, and scandisk ran, but indicated drive letter "H" not "C", so I guess the windows installation is still looking in the original place for it's files, ie. the "C" drive, that's why it won't boot. You cannot change the "System" drive letter from "Computer Management" within XP, and I cannot get into Windows anyway. Is there a "work around" for this, other than a clean install? Even then, is it still going to be drive "H"? And that means another Windows activation. How many goes do you get for activation? I tried a windows repair installation, and reactivation (wasted). Windows then worked, sort of. Lots of things were missing and programs unuseable,as they were looking for their files on "C": so I went back to square 1, put my old drive back in for the moment
View 2 Replies
View Related
Jul 23, 2009
I copied/cloned my failing C: to a drive on USB. C: drive has now failed and I need the copy to become bootable. Why can't this question be a simple answer.
What happened to fdisk utilities?
View 5 Replies
View Related
Apr 5, 2007
I have successfully cloned my primary c partition of a dual boot system with XP Pro on the 1st primary partition c: and XP Pro on the 2nd primary partition as d: I can boot into my XP on the c: drive with no problem, but when I attempt to boot into my XP on the D drive it hangs on the blue screen right before booting into the user profiles. And believe it or not it continuously loops making the windows startup sound and the shutdown sound. It does the same in safe mode. I will try to explain the process on what I did so it can help you experts figure out this dilemma
View 3 Replies
View Related
Jan 31, 2005
After an entire weekend working on this project, I am beat. I have a client who has a Windows NT Server and is replacing a 4 GB SCSI hard drive with a 20 GB IDE. System sees the new drive. I have used Ghost to create the clone of the original drive from the 4 GB SCSI to the 20 GB IDE. That worked fine. However, after removing the SCSI drive to boot from the 20 GB IDE, I repeatedly obtain the STOP: 0x0000007B INACCESSIBLE_BOOT_DEVICE. I have been in contact with Symantec and they have not been of much help. I have seen the article from Microsoft regarding the error as well but have not had much luck.
My question is by chance, has anyone else experienced a similiar situation and what has been your resolution? I would be extremely grateful to anyone who may have an answer to this problem.
Thank you for any help you may provide. I have not seen a similiar thread here on this forum of a clone from a SCSI to an IDE.
View 11 Replies
View Related
Oct 5, 2007
I just formatted my PC, I installed windows xp pro again but it installed everything on my small drive h: drive which only has 4gig on it, is there a way to change everything back to my c: that has 107gig on it? I installed a couple of programs and its already full.
View 1 Replies
View Related
Aug 18, 2009
I am having an issue with changing the main drive letter on my mother's computer. I made a pretty amateur mistake when I was re-installing Windows XP for her and left my external hard drive connected from taking her files off of her old hard drive so the installing found "H:" being the most appropriate drive letter and now a few badly written programs she has tried to install automatically fail because they are set to look for drive "C:".I know my only option is to re-install yet again to get a fresh start, but I was hoping there was another possibility (albeit might be harder) to set the drive letter right. Typically I went to "manage" and "drives and storage" and attempted to change the letter, but Windows will not allow me to change the drive letter of the main volume. If anyone has any suggestion, please throw them out there-I may have made an newbie mistake, but I know my way around pretty well.
View 8 Replies
View Related
Jul 8, 2008
I have a hard drive that comes with my PC and that has a corrupted Windows, but the boot.ini still works fine. So I got a new hard drive and installed a new fresh copy of Windows XP on it. So now I want to format the old hard drive and use the new hard drive as the boot drive. However, if I removed the old hard drive, the new hard drive doesn't boot at all. I've tried using the FIXMBR, FIXBOOT, and BOOTCFG /REBUILD commands, but I think I did it wrong.
View 4 Replies
View Related
Sep 24, 2007
WinXP Pro SP2..Multiple drives USB, SATA, EIDE..Had WinXP on C:. Drive started getting a little flaky, created an XP parallel install on newly formatted NTFS drive F: Dual boot works fine, can choose either install to boot, (of course the F: install is newer/cleaner/faster)C: continues to go south, taking the bootloader with it.Is there some way to make the drive F: installation bootable, so that I can jettison the wonky C: drive? It's not a question of BIOS boot order, or whatever, if I disable C: and set the F: disk as the boot device, I get an error message about inserting bootable media.I'm fooling around with Acronis Disk Director and OS selector, but that doesn't seem to get me completely there.
View 5 Replies
View Related
Sep 17, 2006
I took out a driver from a computer and installed it as a slave on a new one and tried to copy everything on it but it won't let me access the one main user folder--its say I don't have access rights, but I am logged on as an Administrator. How do I change that?
View 3 Replies
View Related
Jul 27, 2007
my desk top is using xp and i cant access it i have tried all sorts of things boot disks, recovery disks but still no joy, tell me to format then i can start again,
View 8 Replies
View Related
Jul 29, 2005
I have recently upgraded to Windows XP Professional, but I have several old zip disks that were compressed using Drivespace under Windows 98SE. Is there any way I can access these disks to get the stuff off them using XP? When I try accessing the drive I just get a file displayed called READTHIS.TXT which says the following:- "This disk was compressed using Windows 98 DriveSpace. To use this disk, you must first mount it. To mount it:
1. Run DriveSpace in Windows.
2. In the Drives list, click the drive that contains the disk, and then click Mount on the Advanced menu.
To automatically mount all compressed devices, use the Settings command on the Advanced menu. (If this file is located on a drive other than the drive that contains the compressed disk, then the disk is already ounted)." I do not have access to a computer with Windows 98 on it at this time.
View 2 Replies
View Related
Jan 8, 2009
I am cloning my existing hard drive in my laptop (sata) to an external hard drive (pata) in preparation for installing a new larger hard drive (sata)in the laptop. Can I, or how do I transfer the cloned data from the external (pata) to the new internal hard drive (sata)? Thanks in advance and I apoligize if this is a rudimentary question as this is my first time attempting something like this.
View 6 Replies
View Related
Apr 3, 2007
I have successfully cloned my primary c partition of a dual boot system with XP Pro on the 1st primary partition c: and XP Pro on the 2nd primary partition as d: I can boot into my XP on the c: drive with no problem, but when I attempt to boot into my XP on the D drive it hangs on the blue screen right before booting into the user profiles. And believe it or not it continuously loops making the windows startup sound and the shutdown sound. It does the same in safe mode. I will try to explain the process on what I did so it can help you experts figure out this dilemma that I'm having. My old drive an IDE 100GB IBM primary drive was partitioned into 3 parts:
c: 30GB FAT32 primary
d: 30GB FAT32 "
e: 30gb FAT32 "
All ran great in XP's on c: ,D: and :e except that i was running out of room in all the partitions and the drive is getting very old , I think (5yrs). I used XXClone Pro v.0.58.0 to clone my old c: and d: partitions to a WD IDE 160GB. I tried many other cloning proggys like Acronis True Image, Drive Clone, Paragon Drive Copy, Drive Image 2002, HDClone 3.1 Pro but they all either changed my new drive NTFS file system to FAT32 or made exact same size copies. I formatted and partitioned my new drive as follows:..............
View 2 Replies
View Related
May 19, 2006
A problem has been detected and Windows has been shut down to prevent damage to your computer.If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps.Check for viruses on your computer. Remove any newly installed hard disks or hard drive controllers.Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
View 4 Replies
View Related
Jan 31, 2010
I cloned a desktop with dual boot for windows xp and windows vista in the respected order. after cloning, I went to an identical desktop and make the image restore so that it will be similar to the other one. I did this to save time installing and updating again which take so much time. after the restoring of the image is done, the system rebooted and represented the dual boot options (1. earlier version of windows, 2. Windows Vista) but when you click any of them it wont work and it will reboot in endless loop
View 5 Replies
View Related
Aug 23, 2005
I have just used ACRONIS True Image to clone WIN XP Pro from an IBM Think pad to a Dell Optiplex desktop.After restoring the image to the Dell - I used the original Dell XP Pro disk to do a Repair install (not recovery console). XP then booted up into the Dell.All works fine and I have not had to re-install any of my applications.However, I am missing my display driver, Power management drivers, etc. So I can't hibernate but the display as it stands works fine.Is there some way of getting these drivers to be recognized or auto detected? I thought Windows would just auto detect them but perhaps because everything is working this step is bypassed.I can always go back and do a restore with my Dell disks but I am trying to avoid re-installing all my apps - the greater task than reinstalling XP.
View 2 Replies
View Related
Apr 8, 2008
I have just cloned my C: drive which is only 2.93 GB big, to install my Windows OS on my D: drive which is a lot bigger.Is there anyway I can now remove the OS or the files from the C: drive, and if so, if not, how do i now make my computer boot up from copy of OS now installed on D:
View 9 Replies
View Related
Oct 24, 2006
I am about to purchase a laptop and if there is anything I've learned over the years, it's that these companies like to cram laptops with useless software, most of which expires after a certain amount of time thus making it even more useless. What I would like to do after purchasing the laptop is completely format the hard drive and then install my own copy of Windows along with software that I do use. If anything ever goes wrong however, the originally installed version of Windows along with the manufacturer's software / utilities will most likely be needed for warranty. So my question is about how to make a perfect copy of the hard drive before formatting it. I have Partition Magic which has an option called "Copy Partition" which I imagine is what I am looking for, but I would like to make sure I don't do anything wrong.
Would I install Partition Magic, make a hidden partition that is large enough for the currently installed version of Windows and the extra "bundled" software, and then copy Windows and the software to it? After which I would then format the rest of the hard drive and then install my own version of Windows there. If anything ever goes wrong, I would format the partition I was working with and copy the hidden partition back to it. Is this the correct thing to do, and if so is there anything else I should be aware of before doing this. For example, will the original version of windows still function correctly if I ever did have to restore it? I always hear about people doing this and I assume this is what they do.
View 12 Replies
View Related
Sep 3, 2006
I recently cloned my 40 gig western digital hard drive over to a 160 gig Hitachi.I am running windows xp pro sp2.First I used Norton Ghost,when finished copying I switched hard drives,relocated the jumpers so the new one was set to master. I restarted my personal computer.It showed the hard drive and the 2 cd roms but my personal computer wouldn't boot.I then formatted the Hitachi and tried again with power quest Drive image,I got the same results.It shows my new hard drive configured Then I get the splash screen then just a blinking dot in the top left corner of my screen so I tried again with hard disk clone, still wouldn't boot to the hard disk. I then created a floppy boot disk which made it load up perfectly.I tried the f disk thing. I tried the R repair with the windows xp disk.to no avail.My hard drive will boot great if I use a boot disk but it won't boot to the hard drive on it's own.If I put the original hard drive in it boots up fine.I have a compaq presario 5000.I have tried everything I could think of and everything I could find searching the web.
View 14 Replies
View Related
Feb 25, 2006
I have XP pro and have been trying to change the name of the name in Outlook Express from MAIN IDENTITY to Len and I have ended up with 2 names and Main ID and Len will not delete and if I ask it to start in Main ID I get this message, THE CURRENT IDENTITY COULD NOT BE CHANGED BECAUSE ONE OF THE APPLICATIONS WAS UNABLE TO SWITCH. CLOSE ANY DIALOGUE BOXES IN OTHER APPLICATIONS BEFORE TRYING AGAIN. I have nothing else open how to get back to main and get rid of Len.
View 5 Replies
View Related
Feb 1, 2005
how do you change the name of the computer (not the user account names) the main one when you're installing windows
View 7 Replies
View Related
Feb 8, 2006
When ever I am clicking on something the window that I want opens behind the main one. Lets say your in control panel, you click on add and remove or user accounts. It doesn't pop up in front of the control panel.I see it on the task bar and I just click it to make it display. What could the cause or settings for this?
View 3 Replies
View Related
Jul 18, 2008
I have encountered rather a frustrating problem and am quite desperate for any help. Apologies for the long post, but I wanted to make sure to include all the relevant steps of how I reached the point I'm at now.Yesterday, running Windows XP Home Edition SP2, I tried out Google's new "Lively" program (3D interactive chat; mostly integrated into a web browser--Firefox in my case) for the first time. Later on in the day, just before bed, I decided I should defragment the C hard drive, as I had not done so in quite some time.I started the defragmenter while I was still tinkering with Lively, which was probably a bad choice, and perhaps very silly of me. A few moments after starting the defragmentation process, I clicked an option in Lively (to alter my avatar I think) and the system hung; both the mouse and keyboard no longer got any response from the computer.I waited for a little while, then I was able to move the mouse pointer again. I clicked in my browser window a couple of times to test responsiveness, but the system froze once more. After several minutes I gave up on waiting and went to bed, leaving the system to hopefully sort itself out.
View 8 Replies
View Related
Jan 15, 2008
My main pc is running XP mostly, and has started locking up while using different applications. I have watched it with Task Manager and Process Explorer and I don't see anything out of the ordinary running. So far I have watched Ad-Aware SE, Spybot Search & Destroy, Nod32 and Sonicstage omg. lock up while in use. Is there some way to set up a log file that will tell me what is happening when XP locks up. I would like to have more info on the reason for the problem.I can reinstall but I would really like to understand what is going on. This has never happened to me before.
View 2 Replies
View Related
Mar 16, 2007
I have a dual monitor setup on my PC. Today, when I boot it up, the main monitor displayed all theboot information and startup stuff, however, when the system SHOULD have gotten to the user login screen, the main montor came up with "no signal." The secondary monitor at this time will still show my mouse moving around on it, and I'm able to move the mouse over to the main monitor but I can't see anything.I've gone through a few basic manuevers to see what was wrong. I booted in safe mode and logged in to my mai account and attempted to change the other monitor to the main one; However, Safe Mode does not appear to supoort multi-monitor and I couldn't change this. After that, I attempted to VNC into my computer with the notebook I'm on now. When I came to the login dialogue box, the only account I could log into was the invisible "Administrator" account. My main account, as well as a temporary account I created for testing, both came up with an error "Cannot access due to user restrictions." My theory is that because all of the accounts which are actually visible on the login screen seem to not be working, the login is bugging and not outputting anything to my main monitor (since I have verified both monitors and connections to be working properly).
View 6 Replies
View Related
Jun 6, 2008
I am having a puzzling little problem with my HP desktop computer.I am running windows xp service pack 2.At random times a little cream colored vertical cursor appears at the lower left-hand section of the main desktop screen near to the start tab.It appears every now and then for a few seconds it blinks at a fairly slow rate, then it disappears.Everything else is working fine.The computer boots up fine it doesnt freeze or go to a blue screen.Its just that little annoying cursor that pops up that shouldnt be there.It doesnt belong to any software (like a word processor) that I own.Does anyone have any idea what could be causing it and what I would have to do to make it go away.Has anyone heard of this? I have anti-virus software and its up to date and running.It doesnt detect any viruses.So I am kind of baffled.The cursor doesnt seem to effect anything but its just annoying more so because I dont know whats causing it.At least if I knew what it was maybe I wouldnt feel worried about it.
View 12 Replies
View Related
Aug 16, 2005
I'm administering a heterogeneous TCP/IP-based network with Windows 98, Windows 2000, Windows XP (2 computers), Linux, and SGI's IRIX. I have a problem with one of the Windows XP computers. lets call it Laptop.Laptop can see all of the other computers that put out Windows-accessible shares and can browse any folder that shows up in its own Network Neighborhood.
Everybody can see Laptop in Network Neighborhood
Everybody can see the shares on Laptop -- and everybody sees the same list of shares
Everybody can browse Laptop's C-drive and E-Drive.
No one can browse either Laptop's main user's My Documents or the general Shared Documents folders.
View 2 Replies
View Related
Dec 28, 2006
Have rebuilt my desktop, new mobo, 160G HD, 1G Ram. Mobo is a fujitsu that is listed on the HCI, but needs external video card - using Geforce. Win XP-SP2 from Tiger/OEM version. Did the install/format Hd, install finishes, restarts and does a particial boot -- Win XP main screen comes on, then screen flashes over to a poor quality XP main screen, and halts. Restart in Safe Mode, boot starts but when main screen should appear, horiz. lines and blue text type symbols, as if Geforce video card not being functional.
View 6 Replies
View Related
Jun 27, 2005
When I look with the Explore facility the size of all my directories in C: I found roughly 8.3 GB, When I look at the used space with Property on C: I found 26.2 GB or 3 times more ! The remaining free space si 1.5 GB.I cannot understand why.I have deleted all the temp files, try to delete the maximum unnecessary
files but I now cannot go much further so I cannot defragment for instance and I suppose I am going into a wall soon if I do not act quickly.
View 8 Replies
View Related
Jan 10, 2008
In a 3 box network,is it possible for the 2 satellite boxes to access the main cpu at the same time? Even if the 2 satellites are to run different programs? I know that individual programs give full PROGRAM access simultaneously to 2 satellites on 1 main cpu.
View 6 Replies
View Related
