Hard Disk Would Not Boot After Cloning
Sep 3, 2006
I recently cloned my 40 gig western digital hard drive over to a 160 gig Hitachi.I am running windows xp pro sp2.First I used Norton Ghost,when finished copying I switched hard drives,relocated the jumpers so the new one was set to master. I restarted my personal computer.It showed the hard drive and the 2 cd roms but my personal computer wouldn't boot.I then formatted the Hitachi and tried again with power quest Drive image,I got the same results.It shows my new hard drive configured Then I get the splash screen then just a blinking dot in the top left corner of my screen so I tried again with hard disk clone, still wouldn't boot to the hard disk. I then created a floppy boot disk which made it load up perfectly.I tried the f disk thing. I tried the R repair with the windows xp disk.to no avail.My hard drive will boot great if I use a boot disk but it won't boot to the hard drive on it's own.If I put the original hard drive in it boots up fine.I have a compaq presario 5000.I have tried everything I could think of and everything I could find searching the web.
View 14 Replies
ADVERTISEMENT
Jan 8, 2009
I am cloning my existing hard drive in my laptop (sata) to an external hard drive (pata) in preparation for installing a new larger hard drive (sata)in the laptop. Can I, or how do I transfer the cloned data from the external (pata) to the new internal hard drive (sata)? Thanks in advance and I apoligize if this is a rudimentary question as this is my first time attempting something like this.
View 6 Replies
View Related
Apr 3, 2007
I have successfully cloned my primary c partition of a dual boot system with XP Pro on the 1st primary partition c: and XP Pro on the 2nd primary partition as d: I can boot into my XP on the c: drive with no problem, but when I attempt to boot into my XP on the D drive it hangs on the blue screen right before booting into the user profiles. And believe it or not it continuously loops making the windows startup sound and the shutdown sound. It does the same in safe mode. I will try to explain the process on what I did so it can help you experts figure out this dilemma that I'm having. My old drive an IDE 100GB IBM primary drive was partitioned into 3 parts:
c: 30GB FAT32 primary
d: 30GB FAT32 "
e: 30gb FAT32 "
All ran great in XP's on c: ,D: and :e except that i was running out of room in all the partitions and the drive is getting very old , I think (5yrs). I used XXClone Pro v.0.58.0 to clone my old c: and d: partitions to a WD IDE 160GB. I tried many other cloning proggys like Acronis True Image, Drive Clone, Paragon Drive Copy, Drive Image 2002, HDClone 3.1 Pro but they all either changed my new drive NTFS file system to FAT32 or made exact same size copies. I formatted and partitioned my new drive as follows:..............
View 2 Replies
View Related
Dec 28, 2005
Hey, have built a new pc, but am using the same hd as my old one, when booting i get a "disk boot failure insert system disk and press enter" however when i press enter it boots up, not really a big problem just annoying and i wonderd if anyone could help get rid of it.
View 4 Replies
View Related
Jan 19, 2009
I have just recently gotten a new computer which came with Vista. Previously what I have done with any new operating system I got was installed it into my old computer. However, I came to find out you can only have one computer assigned to each cd, unless I wanna buy another one, which is unecessary. I wanted to get rid of Vista and return to XP but the XP disc would not install because of multiple errors, such as missing ntldr.
View 14 Replies
View Related
Apr 5, 2007
I have successfully cloned my primary c partition of a dual boot system with XP Pro on the 1st primary partition c: and XP Pro on the 2nd primary partition as d: I can boot into my XP on the c: drive with no problem, but when I attempt to boot into my XP on the D drive it hangs on the blue screen right before booting into the user profiles. And believe it or not it continuously loops making the windows startup sound and the shutdown sound. It does the same in safe mode. I will try to explain the process on what I did so it can help you experts figure out this dilemma
View 3 Replies
View Related
Jan 31, 2005
After an entire weekend working on this project, I am beat. I have a client who has a Windows NT Server and is replacing a 4 GB SCSI hard drive with a 20 GB IDE. System sees the new drive. I have used Ghost to create the clone of the original drive from the 4 GB SCSI to the 20 GB IDE. That worked fine. However, after removing the SCSI drive to boot from the 20 GB IDE, I repeatedly obtain the STOP: 0x0000007B INACCESSIBLE_BOOT_DEVICE. I have been in contact with Symantec and they have not been of much help. I have seen the article from Microsoft regarding the error as well but have not had much luck.
My question is by chance, has anyone else experienced a similiar situation and what has been your resolution? I would be extremely grateful to anyone who may have an answer to this problem.
Thank you for any help you may provide. I have not seen a similiar thread here on this forum of a clone from a SCSI to an IDE.
View 11 Replies
View Related
Oct 4, 2010
Trying to help daughter with PC problem. She has a Dell Optiplex GX260 running Windows XP Pro. For some time she has been having problems: freeze ups and other noxious behavior. When trying to open email attachments, tabs start appearing and keep on appearing until the PC is turned off. Finally, it stopped booting to Windows. When it is powered on, the Dell logo window appears briefly, then a black screen appears with a cursor top left.
View 2 Replies
View Related
Nov 9, 2006
I have been using a Compaq Deskpro with Windows XP SP2. And then I sold that computer and bought a Compaq Evo. I then inserted the same harddrive but it is failing to boot. When I insert the installation disc it says "Press any key to boot from CD". Pressing keys does not activate anything and it stays on the same screen. I then created 6 set up disks and they all work perfectly loading drivers etc. The problem starts when I reach the stage where it says "insert Win XP SP2 installation disc and press any key when ready". Pressing the keyboard keys produces no response
View 7 Replies
View Related
May 3, 2005
a friend asked me to install a new hard drive for him because his crashed. So i purchased a new hard drive (maxtor 60 gb) set out to partition and format the drive, using a win 98 boot disk. I partitoned the drive ( for large volume drive.) Formatted the drive ( format c: /s ) to include system files.and proceeded with Os install Windows 2000. Everything went as smooth as silk... the when install finished, I was prompted to remove the disk from cd rom and complete installation with the onscreen prompt. I removed disk, clicked finish and the computer rebooted upon loading, when it went to start windows it said DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
I put the Win 2K disc back in and hit enter. It started windows perfectly no errors at all... then I took disk out re-started ( to check system stability) and back to the same error message: DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER. I of course freaked out, I feel like an idiot cause I cant get this thing to work right. tried reformatting without the sytem files, re-partioning tried win 98, winXP, nothing same stuff! So I talked to a pal got a hard drive wipe program off the net "killdisk", wiped the drive and tried to reinstall Win 2K, same problem.
View 8 Replies
View Related
May 25, 2004
I installed a Serial ATA hard drive. Booted from floppy,partitioned and formatted 120mb HD,with 2 partitions.
Connected my old IDE drive and booted from Norton Ghostdisc, cloned my old drive to the new one. Removed all drives and USB card readers except the new SATA drive. Windows will not fully boot, it halts at the blue Windows intro screen. Restarted Windows, and scandisk ran, but indicated drive letter "H" not "C", so I guess the windows installation is still looking in the original place for it's files, ie. the "C" drive, that's why it won't boot. You cannot change the "System" drive letter from "Computer Management" within XP, and I cannot get into Windows anyway. Is there a "work around" for this, other than a clean install? Even then, is it still going to be drive "H"? And that means another Windows activation. How many goes do you get for activation? I tried a windows repair installation, and reactivation (wasted). Windows then worked, sort of. Lots of things were missing and programs unuseable,as they were looking for their files on "C": so I went back to square 1, put my old drive back in for the moment
View 2 Replies
View Related
May 18, 2005
applications were running slow, having problems closing etc. I expected a virus problem, but NIS 2005 did not detect any viruses. This morning I attempted to boot the machine as usual, and I found that windows would not boot after repeated attempts in any mode. I borrowed a friends windows XP cd, i dont have mine on hand, and attempted to repair the installation. However, when it tried to copy files to the hard drive it said that it could not detect it.
Naturally, seeing this i assumed that the harddrive had gotten knocked around, bad power lead, etc. I made sure that the connecters were securely attached and booted again, repair etc, same problem. I believe that the problem lies with the configuration of using a PCI card to connect the hard drive to the motherboard. When its connected to the mother board, however, the boot agent wont run, saying that the "disk is not ready" or something to that extent.
View 12 Replies
View Related
Feb 28, 2008
If I want to attach second hard disk with the same configuration of master hard disk, then system doesn't show second hard disk altogether or new hard disk begin to malfunction. Such as suddenly begin to give sounds like TICK, TICK TICK. Suddenly vanishes from the 'MY COMPUTER' drives. Suddenly denies to copy paste functions. BIOS shows both SATA drives. But Win XP doesn't load or simply hangs while starting up [booting up]. It happens when I attach second SATA drive with system. If only one SATA is attached, then WIN XP boots normally.
View 3 Replies
View Related
Jun 16, 2005
I recently tried to reinstall windows xp, but the installation was interrupted and left me with a partially installed windows on my hard drive. Now, whenever I try to install again, it gives me the error: NTLDR is missing. I made a msdos boot disc to reformat my drive such that I can try installing windows again. However, I have two hard drive (one for windows and programs and one for storage) and I don't know which one is which letter. How can I find this information, so that I don't accidentally wipe my storage drive?
View 6 Replies
View Related
Dec 29, 2006
An external hard drive. When it is on & I try to boot,I get the following error : Invalid system disk Replace the disk, and then press any key I then have to turn off the external & press any key to get it to boot. Is there a way that I can boot with that external turned on. Some setting I need to change perhaps? I have an E-Machines computer about 2 years old.
View 6 Replies
View Related
Jul 4, 2010
recently bought SATA 3.0 hard disk(samsung)and i forgot if my motherboard support this hard disk,after checking it only supports 1.5 SATA.I visited samsung website on how to force my Hard disk to run at 1.5
View 8 Replies
View Related
Sep 15, 2009
I have created a Bart PE bootable XP cd. I can boot into windows using this CD I would like to know how to copy the data in my hard disk to pen drive or flash drive.
View 11 Replies
View Related
May 1, 2007
It says that TOTAL SIZE = 39 GB And Free Space = 5 GB Which means that the size of all files on C is 34 GB But when I select all files including Hidden files and Right Click> Properties, its size of all files is only 27 GB.I did clear recycle bin and disk defragmenter C, but still the same. So why is that?
View 4 Replies
View Related
May 6, 2005
I can not access hard disk properties because Windows Explorer hangs whenever I Right click on a hard drive icon. I am running WXP pro SP2 completely up to date with updates.
View 1 Replies
View Related
Feb 27, 2007
if someone could tell me how to format windows xp home edition from the bios and not using the xp disk. I have already tried right clicking on drive c and selecting format but the message says windows cannot format this drive. Quit any disk utilities or other programs that are using this drive, and make sure that no window is displaying the contents of the drive. Then try formatting again.
So I closed all open programs that I could but still no luck. Then I tried the format from running the run command and typing format c:but I get this message format cannot run because the volume is in use by another process. Format can run if this volume is dismounted first. All open handles to this volume would then be invalid. would you like to force a dismount on this volume? (y/n) so I type y for yes and hit enter then nothing
View 6 Replies
View Related
Jan 28, 2005
I upgraded my server, basically all I kept was the two hard drives from the old machine. The one hard drive is for the system files (~13GB) and the other is for storage, user files, etc (~160GB). I figured that then I reinstalled Windows 2000 Server on the System disk, I would just have to assign the other disk a drive letter and be on my way. Instead, in the disk management console, I get "Disk 1 [the 160GB) Dynamic Unreadable" I can revert to a basic disk, but it says I will lose all my information. It is imperative that the data on this disk be recovered.
View 5 Replies
View Related
Jun 4, 2008
I am facing two problems with my lap top hp campac presario 2100.
1.The loptops battery to be changed. I dont know how many batteries are there. Any cmos battery there like any other pc. Pl advice. What would be the cost. and the model number . The hard disk requires replacement. I want to know the model numberor exact type of hard disk would be fit in. and the cost thereof.3. Windows xp home edition has been preloaded in the laptop. How to take a copy of the os and copy in the new hard disk. I have the serial number etc for the OS.
View 1 Replies
View Related
Jan 31, 2010
I cloned a desktop with dual boot for windows xp and windows vista in the respected order. after cloning, I went to an identical desktop and make the image restore so that it will be similar to the other one. I did this to save time installing and updating again which take so much time. after the restoring of the image is done, the system rebooted and represented the dual boot options (1. earlier version of windows, 2. Windows Vista) but when you click any of them it wont work and it will reboot in endless loop
View 5 Replies
View Related
Aug 15, 2008
Last week i installed windows XP Pro on my desktop. It has a 250GB hard drive which has 1 partition (C drive only), NTFS offcourse. I did not format it while installing windows as it has lots of stuff in it. There's over 50GB free and i�ve been removing a lot of stuff from the hard drive to make up some space but in windows i get an error message that i don't have enough disk space, the disk cleanup utility runs cant free up space and i can not install or copy anything in the hard drive. I've noticed that when i deleted some file holding (or not) the shift key the free size goes lower although the files are being deleted from the hard disk.
View 14 Replies
View Related
Sep 12, 2006
my dad's hard drive crashed and so he has just bought another, now he needs to reinstall Windows XP Home but unfortunately he doesnt have a disk as its an HP machine and a disc was never supplied, the operating system was already on the computer and the option of making a recovery disc was available but he never actually undertook that option So he needs to get Windown back on his computer, he has the serial sticker on the side of his machine, he rang up HP and they said the machine is not in warranty - they cant send him a replacement disc
View 2 Replies
View Related
Dec 1, 2005
I always have errors reported on my hard drive, even after chkdsk /f and /f/r."Freespace marked as allocated in the volume bitmap". Why does it never go away? Windows XP Pro with all of the updates. Machine runs fine.
View 6 Replies
View Related
Jul 23, 2009
I copied/cloned my failing C: to a drive on USB. C: drive has now failed and I need the copy to become bootable. Why can't this question be a simple answer.
What happened to fdisk utilities?
View 5 Replies
View Related
Jul 19, 2009
My main HD is about to give up. It's making strange noises whenever I start up or have a file on that drive open.Could I buy a new HD and install it as a slave drive. Then clone my main drive to the slave drive and then get rid of the old main drive and put the clone in as my new main drive? Without a lot of f***ing about?The reason I ask about doing it this way is that I don't have a set of XP disks, I just have the recovery disk that came with computers 8-10 years ago. It's pre sp1 and I've used it three or four times already and I'm sure it will be more hassle than I need to re install from it.I'm running XP sp2. When I had this comp put together they had to do a raid controller, I don't really know what that is. Something to do with the fact that the main drive is IDE only and my current second drive is IDE or Sata but is in place as an IDE drive.
View 8 Replies
View Related
Aug 23, 2005
I have just used ACRONIS True Image to clone WIN XP Pro from an IBM Think pad to a Dell Optiplex desktop.After restoring the image to the Dell - I used the original Dell XP Pro disk to do a Repair install (not recovery console). XP then booted up into the Dell.All works fine and I have not had to re-install any of my applications.However, I am missing my display driver, Power management drivers, etc. So I can't hibernate but the display as it stands works fine.Is there some way of getting these drivers to be recognized or auto detected? I thought Windows would just auto detect them but perhaps because everything is working this step is bypassed.I can always go back and do a restore with my Dell disks but I am trying to avoid re-installing all my apps - the greater task than reinstalling XP.
View 2 Replies
View Related
Apr 8, 2008
I have just cloned my C: drive which is only 2.93 GB big, to install my Windows OS on my D: drive which is a lot bigger.Is there anyway I can now remove the OS or the files from the C: drive, and if so, if not, how do i now make my computer boot up from copy of OS now installed on D:
View 9 Replies
View Related
Oct 24, 2006
I am about to purchase a laptop and if there is anything I've learned over the years, it's that these companies like to cram laptops with useless software, most of which expires after a certain amount of time thus making it even more useless. What I would like to do after purchasing the laptop is completely format the hard drive and then install my own copy of Windows along with software that I do use. If anything ever goes wrong however, the originally installed version of Windows along with the manufacturer's software / utilities will most likely be needed for warranty. So my question is about how to make a perfect copy of the hard drive before formatting it. I have Partition Magic which has an option called "Copy Partition" which I imagine is what I am looking for, but I would like to make sure I don't do anything wrong.
Would I install Partition Magic, make a hidden partition that is large enough for the currently installed version of Windows and the extra "bundled" software, and then copy Windows and the software to it? After which I would then format the rest of the hard drive and then install my own version of Windows there. If anything ever goes wrong, I would format the partition I was working with and copy the hidden partition back to it. Is this the correct thing to do, and if so is there anything else I should be aware of before doing this. For example, will the original version of windows still function correctly if I ever did have to restore it? I always hear about people doing this and I assume this is what they do.
View 12 Replies
View Related
