Unable To Get System Boot After Changing The Hard Disk?
Nov 9, 2006
I have been using a Compaq Deskpro with Windows XP SP2. And then I sold that computer and bought a Compaq Evo. I then inserted the same harddrive but it is failing to boot. When I insert the installation disc it says "Press any key to boot from CD". Pressing keys does not activate anything and it stays on the same screen. I then created 6 set up disks and they all work perfectly loading drivers etc. The problem starts when I reach the stage where it says "insert Win XP SP2 installation disc and press any key when ready". Pressing the keyboard keys produces no response
Today I went and bought a new hard to install xp clean but only to find out Microsoft wouldn't accept my product keys which for some reason they have blocked . I never thought a retail version could be block . I call Microsoft to find out why my keys are being blocked . I was told that I was trying to activated it to many times in one day , or something like that , which really wasn't the case . I really never got a straight answer as to why . So now my retail version is no good to use .
I have an external hard drive that I have assigned it a permanent hard drive letter reference through Disk Management. I have set the System Restore tab in My Computer Properties tab to not moniter this external hard drive K. Problem is that every now and then when I plug in every now and then for backing up my files via Briefcase - this will activate the System Restore function on that hard drive. This usually happens when I have the hard drive plugged in when I either turn off or turn on my computer. I stopped having the hard drive plugged in to hopefully stop the stop the System Restore on that hard drive (and then re-checked the System Restore tab)
Trying to help daughter with PC problem. She has a Dell Optiplex GX260 running Windows XP Pro. For some time she has been having problems: freeze ups and other noxious behavior. When trying to open email attachments, tabs start appearing and keep on appearing until the PC is turned off. Finally, it stopped booting to Windows. When it is powered on, the Dell logo window appears briefly, then a black screen appears with a cursor top left.
I am looking for a HDD so that I can take the board from it and install it onto mine that has stopped working. The only problem is that I am having trouble locating this model.
An external hard drive. When it is on & I try to boot,I get the following error : Invalid system disk Replace the disk, and then press any key I then have to turn off the external & press any key to get it to boot. Is there a way that I can boot with that external turned on. Some setting I need to change perhaps? I have an E-Machines computer about 2 years old.
If I want to attach second hard disk with the same configuration of master hard disk, then system doesn't show second hard disk altogether or new hard disk begin to malfunction. Such as suddenly begin to give sounds like TICK, TICK TICK. Suddenly vanishes from the 'MY COMPUTER' drives. Suddenly denies to copy paste functions. BIOS shows both SATA drives. But Win XP doesn't load or simply hangs while starting up [booting up]. It happens when I attach second SATA drive with system. If only one SATA is attached, then WIN XP boots normally.
I was running windows on an IDE hard drive and bought a new SATA and installed a fresh copy of windows on it, now having a dual boot with the old installation on the IDE. I've been running on the SATA drive for a few months now and I want to remove the IDE drive from my system but when I disconnect it and reboot I get a message that tells me NTLDR is missing so I am assuming that the boot record is on the IDE drive. How can I make the SATA drive my main boot drive?
Hey, have built a new pc, but am using the same hd as my old one, when booting i get a "disk boot failure insert system disk and press enter" however when i press enter it boots up, not really a big problem just annoying and i wonderd if anyone could help get rid of it.
I have just recently gotten a new computer which came with Vista. Previously what I have done with any new operating system I got was installed it into my old computer. However, I came to find out you can only have one computer assigned to each cd, unless I wanna buy another one, which is unecessary. I wanted to get rid of Vista and return to XP but the XP disc would not install because of multiple errors, such as missing ntldr.
If I partition my hard drive and want to append a partion to the windows xp partition can this be done.Also If I am having problemsdefraging a partition (it say's something about a retore file on it) but this partition does not have an operation system. I just use it to keep web sites I develop on it. How can I defrag it.
I was wondering if anyone can help with reformatting my hard drive. I am looking to reformat and install a clean xp. I have already transfered my files to an external drive. I was wondering if there is a;website if anyone has instructions how to re-format and clean install whats the difference when doing it from windows xp cd or a boot from windows 98?
Getting error message when trying to change out a 10 gig to a 250.NVIDIA Boot Agent 201.0462 PXE-E61: Media Test Failure, check cable PXE-M0F: Exiting NVIDIA Boot Agent DISK BOOT FAILUR, INSERT SYSTEM DISK AND PRESS ENTER" this drive I am upgrading also has Windows XP OS. I have another drive on the computer that has 160g.
My computer was working perfectly well. I left it on and went out. When I came back it had a black screen saying "boot disk error, insert system disk and press enter" in BIOS. This has happened before but I just hit my pc then rebooted then no problem. This time it didnt work, I have tried to vacuum the interior of my pc but to no avail.
I recently cloned my 40 gig western digital hard drive over to a 160 gig Hitachi.I am running windows xp pro sp2.First I used Norton Ghost,when finished copying I switched hard drives,relocated the jumpers so the new one was set to master. I restarted my personal computer.It showed the hard drive and the 2 cd roms but my personal computer wouldn't boot.I then formatted the Hitachi and tried again with power quest Drive image,I got the same results.It shows my new hard drive configured Then I get the splash screen then just a blinking dot in the top left corner of my screen so I tried again with hard disk clone, still wouldn't boot to the hard disk. I then created a floppy boot disk which made it load up perfectly.I tried the f disk thing. I tried the R repair with the windows xp disk.to no avail.My hard drive will boot great if I use a boot disk but it won't boot to the hard drive on it's own.If I put the original hard drive in it boots up fine.I have a compaq presario 5000.I have tried everything I could think of and everything I could find searching the web.
i was infested with spyware so i decided to use a programe called clean wipe which it said wiped everything off your computer after wipeing i reinstalled windows xp sp2 but it would only let me partition 20gb but before the wipe i had 40gb so ive lost 20gb somewhere.
first i get the HP blue screen. I tried F1, but i dont see my hard drive in the boot menu. I followed some steps in Hp's web site- took the cpu apart and unplugged both hard drives from the motherboard, plugged them back in. when i restarted ,i got the HP screen and then windows started to load up. After a few seconds the HP screen came back up and then the black screen: sk boot failure, insert system disk and press enter. I also noticed that pressing F10 for system recovery does nothing.
i have got the same problem....but when i insert a windows xp cd it is unable to detect it so the problem continues to be there itself...and more over i am using gigabyte mother board.and if i insert that cd.the monitor displays"FD 1.44MB System type(13)"gigabyte bootCD loader. press any key to boot from CD-ROM" when i press a key...it shows.."hard drive not installed properly press any key to restart"
a friend asked me to install a new hard drive for him because his crashed. So i purchased a new hard drive (maxtor 60 gb) set out to partition and format the drive, using a win 98 boot disk. I partitoned the drive ( for large volume drive.) Formatted the drive ( format c: /s ) to include system files.and proceeded with Os install Windows 2000. Everything went as smooth as silk... the when install finished, I was prompted to remove the disk from cd rom and complete installation with the onscreen prompt. I removed disk, clicked finish and the computer rebooted upon loading, when it went to start windows it said DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
I put the Win 2K disc back in and hit enter. It started windows perfectly no errors at all... then I took disk out re-started ( to check system stability) and back to the same error message: DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER. I of course freaked out, I feel like an idiot cause I cant get this thing to work right. tried reformatting without the sytem files, re-partioning tried win 98, winXP, nothing same stuff! So I talked to a pal got a hard drive wipe program off the net "killdisk", wiped the drive and tried to reinstall Win 2K, same problem.
applications were running slow, having problems closing etc. I expected a virus problem, but NIS 2005 did not detect any viruses. This morning I attempted to boot the machine as usual, and I found that windows would not boot after repeated attempts in any mode. I borrowed a friends windows XP cd, i dont have mine on hand, and attempted to repair the installation. However, when it tried to copy files to the hard drive it said that it could not detect it.
Naturally, seeing this i assumed that the harddrive had gotten knocked around, bad power lead, etc. I made sure that the connecters were securely attached and booted again, repair etc, same problem. I believe that the problem lies with the configuration of using a PCI card to connect the hard drive to the motherboard. When its connected to the mother board, however, the boot agent wont run, saying that the "disk is not ready" or something to that extent.
I recently tried to reinstall windows xp, but the installation was interrupted and left me with a partially installed windows on my hard drive. Now, whenever I try to install again, it gives me the error: NTLDR is missing. I made a msdos boot disc to reformat my drive such that I can try installing windows again. However, I have two hard drive (one for windows and programs and one for storage) and I don't know which one is which letter. How can I find this information, so that I don't accidentally wipe my storage drive?
I have a dwsktop vaio When I boot from cold it does not find hard drive. I get an error message Disk boot failure Insert system disk and press enter. If I restart the computer and go into the bios it does not show the hard drive but when I come out of the bios it then boots up.It will only bootup if I go into the bios first?
I have a 2 hard disc system, Windows XP pro and most programmes run from the C Drive. A few, plus all my data run from the F drive. Over the last few days I have encountered a massive slowdown in getting the computer started - form certainly less than 5 minutes to over 20 minutes. I have not added anything to the autoruns at all.
Programmes and data (eg music) run fine if they are on the F drive, but if they are on the C drive they run incredibly slowly so music is fragmented and at times its like trying to wade through treacle to get anything done. I have been getting crashes of the PC with a message about a kernel problem... but haven't yet copied all the data from that to get the detail. When it crashes the next boot reports a disc boot system failure, when i reboot ahgain it loads up but painfully slowly. The C drive was defraggged just afew weeks ago. I'm thinking the drive is about to pack up....
Now, I would like to have a backup of both Hard Disks incase of any issues. With regards to the data, this is no issue. However I have questions regarding Hard Disk A.If I make a direct copy of Hard Disk A onto another Hard Disk (i.e. no backup program). Would it be possible to boot from this hard disk? Therefore if anything did go wrong with Hard Disk A, I could make a direct swap and boot from the backup Hard Disk
Plugged my external LaCie HDD in to my PC, as I always do and I had an SVCHOST.exe worm, apparently.. Which was healed by my AVG. Dunno how the hell I had a virus on my ext HDD in the first place. Now, when i try and access by ext HDD by double clicking its icon in "My Computer", I get the "Open With..." dialogue box. I can only browse my files by right-clicking and selecting "Explore".. Everything seems normal on the disk.
My dad sent my daughter a "E Machine" with XP Home. Before he sent it, he transferred all of his personal files. When I hooked it up, the screen said "Boot disk failure. Insert system disk and hit enter". The company sent us a new set of bootable CDs as we thought the problem might be in the CD.
my hard drive was going bad so i bought a new one. With my old hard drive still connected to my computer, i installed my new hard drive, and formatted windows xp on it. Everything was running well, until i removed my old hard drive from my computer and whenever i boot up my computer with my new hard drive, i get an error saying "No device found, please insert a boot disk and press any key". the only way i could boot into windows xp of my new hard drive is by a boot disk i created from another computer. Is there any way that i can boot into XP without always having to use a boot disk?
