My computer was working perfectly well. I left it on and went out. When I came back it had a black screen saying "boot disk error, insert system disk and press enter" in BIOS. This has happened before but I just hit my pc then rebooted then no problem. This time it didnt work, I have tried to vacuum the interior of my pc but to no avail.
View 9 RepliesGetting error message when trying to change out a 10 gig to a 250.NVIDIA Boot Agent 201.0462 PXE-E61: Media Test Failure, check cable PXE-M0F: Exiting NVIDIA Boot Agent DISK BOOT FAILUR, INSERT SYSTEM DISK AND PRESS ENTER" this drive I am upgrading also has Windows XP OS. I have another drive on the computer that has 160g.
View 13 Replies View RelatedWhat can I possibly do to solve this problem? I have Windows XP and everywhere.
View 1 Replies View RelatedDisk boot insert system disk and press enter comes what do i do?
View 2 Replies View RelatedWhen I try to boot Windows XP it says "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER" What do I do?
View 3 Replies View Relatedfirst i get the HP blue screen. I tried F1, but i dont see my hard drive in the boot menu. I followed some steps in Hp's web site- took the cpu apart and unplugged both hard drives from the motherboard, plugged them back in. when i restarted ,i got the HP screen and then windows started to load up. After a few seconds the HP screen came back up and then the black screen: sk boot failure, insert system disk and press enter. I also noticed that pressing F10 for system recovery does nothing.
View 3 Replies View RelatedI have a dwsktop vaio When I boot from cold it does not find hard drive. I get an error message Disk boot failure Insert system disk and press enter. If I restart the computer and go into the bios it does not show the hard drive but when I come out of the bios it then boots up.It will only bootup if I go into the bios first?
View 1 Replies View RelatedI have given my 40GB ATA HDD to my friend to fetch some movies he has got in his 160GB SATA HDD. He configured my HDD as secondary master and copied all the movies to mine. Later he removed my HDD and rebooted the system to find that his HDD isn't booting up. He says that his HDD isn't being detected in the BIOS. The well known error message "No bootable device found. Insert system disk and press Enter" appears every time he tries to boot his system. What can the solution other than formatting?( Formatting isn't favourable as there is critical data in the HDD).
View 4 Replies View RelatedFor some reason my other computer i dont understand it alot but when it comes to a Disk Boot Failur, enter system disk and press enter i usually just shutdown computer plug out the wait around 5-10mins but for this time it has really driven me up the wall. at the moment now it hasnt worked and im asking for help here are some of the things i did... like i said before jst left it and wait... putting OS disk in and try to repair didnt work... try to reinstall didnt work it said it cant OS system something like that... changing my boot system to have HDD first and than CD-ROM than floppy (yes i do have a floppy drive).. but one thing it had told me Win XP when i first tried to repair it it said you have to quite when it count down on when to reboot it said if you have a floopy disk unplug it out and i did it and still not working.
View 7 Replies View RelatedSo I'm having a bit of a nightmare trying to get my copy of XP to boot.Every thing was working fine and then I tried to make a back up image of my drive using Norton Ghost 2003. I have a 200Gb Wester Digital SATA drive and an Asus A8n-SLI mobo. I think that there might have been some problem with the nVidia IDE/SATA drivers as ghost crashed half way thorugh the image making process. Now when I try to boot I get a "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER"
View 4 Replies View RelatedMy dad sent my daughter a "E Machine" with XP Home. Before he sent it, he transferred all of his personal files. When I hooked it up, the screen said "Boot disk failure. Insert system disk and hit enter". The company sent us a new set of bootable CDs as we thought the problem might be in the CD.
View 14 Replies View RelatedMy son gets the message "invalid system disk, replace the disk, then press play" , when booting up, he started getting it after inputting a picture from a "smart card" using his built in card reader. There is NO disk in the reader. If you hit any key the computer continues to boot "normal" It isn't a big problem, but a sign of something not being right.
View 8 Replies View Relatedi m facing problem and i m getrting message as system disk error what i should do now
View 1 Replies View RelatedIn windows XP Pro. Error message: there is no disk in drive Please insert disk. (Refering to A drive). this happened after trouble with an old cable. Replaced the cable and this message pops up on boot.
View 3 Replies View RelatedA Disk Read Error Occurred. Press CTRL+ALT+DEL to restartThis is what my compaq lap top is saying upon restart. Using XP, I do not have any recovery or diagnostic disks.I have a new laptop and was using the compaq as a back- up. I hadn't used it much in the last month or so and when I turned it on, it was unusually slow.I attempted to defrag the hard drive, and it initialized(after it analyzed). During this time windows shut it down for an update to take effect. Upon restart, this is the message I got: A Disk Read Error Occurred. Press CTRL+ALT+DEL to restart.
View 7 Replies View RelatedWhen I want to move something to, or download anything to My CD drives I cannot get past the message "please insert a disk into drive (which ever)". Neither drive will recognize that there is a empty disk in the drive. I've tried different media and various makes of CD's and DVD.'s. I can burn a disk in the Cd/DVD
drive using "Nero". And both drives will open if there is data, music, or pictures on the disk in either drive, but I cannot open a blank empty disk unless it is in conjunction with something I'm doing with Nero.
There are no yelow symbols in device manager. And I have uninstalled both IDE channels that the optical drive is on and on reboot win 2000 reinstalled them automatically. I have updated the firm ware for each drive. Replaced the USB cable for the external drive and before I reloaded the updated firm ware I uninstalled both drives and reinstalled with the updated firmware. My three malware/spyware
programs have been run as has both of my virus programs.
Im trying to repair install windows XP on my computer.I get up to the actual instalation part and it gives me this message:'Please insert the Compact Disk labeled ' VIA AGP Filter Driver Disk' into your CDROM drive (and then click OK. You can also click OK if you want files to be copied from an alternate location, such as a floppy disk'If i click cancel my mouse locks up and my screen flashes on and off and when i reboot it starts up the installation normally again but gives me this message halfway through the instalation.
View 2 Replies View Relatedwindow loads, sits, finally other half will load, mouse just doesn't seem to do anything so you click again and 3 minutes later 2 of whatever will finally open... just annoying crap really A few days ago comcast went off and I had to unplug modem, wait, then plug back up and restart system. I got a "Disk read error press control, alt, delete, to restart"
error, tried that same thing so I shut down and when I turned back on it booted fine. I have since moved... just set up the system and am getting the same error except this time shutdown/restart isn't working ( The OTHER problem I realize is this... this is a tempory move! Most everything I own is in a storage unit, boxes to the back, furniture to the front and guess where my disks are? Right! I put printer, shredder, disks, everything I didn't just HAVE to have in the storage unit.
i am running windows xp home. recently every time my computer starts up it comes up with a error "no disk in drive. please insert disk in drive" the message window contains cancel, try again and continue. i have to cancel repeatedly to get it to go away. can anyone help?
View 14 Replies View RelatedI'd gladly search the archives if I only knew what to call this!Several months ago I requested a feature that prompted W2000 to request that I re-insert the install disk. I did so, but the feature/dll/driver whatever it was (I forget) was not on the disk.Now, whenever I start my machine it stubbornly requests that I insert the install disk. I installed a cool little startup utility by Mike Lin, but am not sure what to turn off.
View 3 Replies View RelatedI have tried putting in my windows disk but it still comes back I have been told to post a log generated by hijack this so here it is.
View 2 Replies View RelatedA Disk Read Error Has Occurred Press ctrl alt del to restart I keep getting that message when i turn on my computer its been like that for the past few days. Im Using windows XP Bell system optiplex 170L series Bios version A07 I can access the setup menu and the boot menu but idk what to do. im a computer noob.
View 4 Replies View RelatedI'm running Windows XP on a EMachines PC. The PC is only a little over a year old. Suddenly tonight I have what appears to be a DOS screen that says "A Disk Read Error Occurred. Press CTRL+ALT+DEL to restart". After doing a ctrl alt delete, I keep getting the same screen again. Can anyone shed some light on how to restart my PC? Is the hard drive shot?
View 14 Replies View RelatedWhen I start up, I get a black screen with this: Disk read error occurred Press Ctrl+Alt+Delete to restart So I do. Same thing happens. I don't have any CDs or anything in the drive. The computer had also been shutting down randomly on me prior to this.
View 2 Replies View RelatedI have been getting this error for the last two days or so. I dont exactly know how but when I boot the computer up it gives me an Error saying: Windows- No Disk. Please insert disk into drive. Cancel. Try Again. Continue -Basically I either have to hit cancel or continue to make it go away...but it is still annoying to see it and it sometimes pops up periodically.
View 9 Replies View RelatedA friend of mine gave me a few computers- because his office was upgrading all of their systems- I reformatted many of them and installed windows me (they are too slow to support xp), but I am having a problem with one. Originally it had windows 2000 pro as the os( I didn't have the password to log-into the computer) So I ran fdisk, formatted the hard drive, then tried to install the new os but I keep getting the error message upon booting that "invalid system disk, remove then press any key to continue".
I thought the cd-rom was bad so I replaced it, I changed the boot sequence, used a floppy to boot, even got the hard drive manufacturer's utility program to prep the drive for the os but even that doesn't work. Am I missing something? Does the fact that I didn't have the password to enter the computer have anything to do with this? I used this same method for installing me on all the other systems and they are fine, but this one is an issue.
I get a 'no disk' message from my cd players. Windows recognizes they are there, and I have changed cables, drivers and rebooted from install and uninstall but nothing seems to be getting windows to recognize that there is a disk in the cd player.
View 1 Replies View Relatedi recently attempted to format my computer as it was going very slowly, i did the usual process of inserting the recovery cd's which came with the computer however this time the process did not complete, i left it for over an hour and the screen still remained the same. I decided to restart the computer and a message keeps coming up, disk read error press ctrl alt delete. I tried formatting again but all i get is a blank screen even before its begun, i tried using windows xp cd's
View 7 Replies View Relatedeverytime i shut down my comp, when i turn it on again i get an error message that says 'insert boot disk' on the startup screen. i'm not sure what the exact message was, but it was something about boot disk i should have written it down anyway, i turned the comp off, and shook the CPU a bit and then tried again and it started. I did a virus scan and every things clear l. i don't know much about these things lol so doing the virus scan must sound a little silly.so then anyway, i had to turn the computer off again and then when i switched it on i got the same error message. i pushed the off button and then put it on again and it worked. how do i prevent getting the error?
View 9 Replies View RelatedAn external hard drive. When it is on & I try to boot,I get the following error : Invalid system disk Replace the disk, and then press any key I then have to turn off the external & press any key to get it to boot. Is there a way that I can boot with that external turned on. Some setting I need to change perhaps? I have an E-Machines computer about 2 years old.
View 6 Replies View RelatedMy CD-Rom drive wont open CD-RW's for some reason, when i insert the disk and try to open it i get the msg Please insert a disk in the cd-rom drive.considering that i've used these same cd-rw's in the past and never had a problem I'm kindda lost. i cant think of anything i've changed that would cause this problem.
i'm useing an acer cd-rom drive and the disks in question have Fedora core 2 on them, I cant get my computer to boot off them, so i tried opening them in windows and there not even being recongnized by the drive, I used them awhile back w/o and trouble but have re-formatted since then