No Bootable Device Found / Insert System Disk And Press Enter
May 15, 2007
I have given my 40GB ATA HDD to my friend to fetch some movies he has got in his 160GB SATA HDD. He configured my HDD as secondary master and copied all the movies to mine. Later he removed my HDD and rebooted the system to find that his HDD isn't booting up. He says that his HDD isn't being detected in the BIOS. The well known error message "No bootable device found. Insert system disk and press Enter" appears every time he tries to boot his system. What can the solution other than formatting?( Formatting isn't favourable as there is critical data in the HDD).
View 4 Replies
ADVERTISEMENT
Jun 15, 2010
When I try to boot Windows XP it says "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER" What do I do?
View 3 Replies
View Related
Nov 8, 2009
Getting error message when trying to change out a 10 gig to a 250.NVIDIA Boot Agent 201.0462 PXE-E61: Media Test Failure, check cable PXE-M0F: Exiting NVIDIA Boot Agent DISK BOOT FAILUR, INSERT SYSTEM DISK AND PRESS ENTER" this drive I am upgrading also has Windows XP OS. I have another drive on the computer that has 160g.
View 13 Replies
View Related
Jun 11, 2008
My computer was working perfectly well. I left it on and went out. When I came back it had a black screen saying "boot disk error, insert system disk and press enter" in BIOS. This has happened before but I just hit my pc then rebooted then no problem. This time it didnt work, I have tried to vacuum the interior of my pc but to no avail.
View 9 Replies
View Related
Jun 23, 2009
What can I possibly do to solve this problem? I have Windows XP and everywhere.
View 1 Replies
View Related
Nov 21, 2009
Disk boot insert system disk and press enter comes what do i do?
View 2 Replies
View Related
Mar 23, 2010
I have a dwsktop vaio When I boot from cold it does not find hard drive. I get an error message Disk boot failure Insert system disk and press enter. If I restart the computer and go into the bios it does not show the hard drive but when I come out of the bios it then boots up.It will only bootup if I go into the bios first?
View 1 Replies
View Related
Jun 10, 2007
first i get the HP blue screen. I tried F1, but i dont see my hard drive in the boot menu. I followed some steps in Hp's web site- took the cpu apart and unplugged both hard drives from the motherboard, plugged them back in. when i restarted ,i got the HP screen and then windows started to load up. After a few seconds the HP screen came back up and then the black screen: sk boot failure, insert system disk and press enter. I also noticed that pressing F10 for system recovery does nothing.
View 3 Replies
View Related
Aug 4, 2009
For some reason my other computer i dont understand it alot but when it comes to a Disk Boot Failur, enter system disk and press enter i usually just shutdown computer plug out the wait around 5-10mins but for this time it has really driven me up the wall. at the moment now it hasnt worked and im asking for help here are some of the things i did... like i said before jst left it and wait... putting OS disk in and try to repair didnt work... try to reinstall didnt work it said it cant OS system something like that... changing my boot system to have HDD first and than CD-ROM than floppy (yes i do have a floppy drive).. but one thing it had told me Win XP when i first tried to repair it it said you have to quite when it count down on when to reboot it said if you have a floopy disk unplug it out and i did it and still not working.
View 7 Replies
View Related
Apr 12, 2005
So I'm having a bit of a nightmare trying to get my copy of XP to boot.Every thing was working fine and then I tried to make a back up image of my drive using Norton Ghost 2003. I have a 200Gb Wester Digital SATA drive and an Asus A8n-SLI mobo. I think that there might have been some problem with the nVidia IDE/SATA drivers as ghost crashed half way thorugh the image making process. Now when I try to boot I get a "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER"
View 4 Replies
View Related
Oct 17, 2005
My dad sent my daughter a "E Machine" with XP Home. Before he sent it, he transferred all of his personal files. When I hooked it up, the screen said "Boot disk failure. Insert system disk and hit enter". The company sent us a new set of bootable CDs as we thought the problem might be in the CD.
View 14 Replies
View Related
Aug 19, 2008
My son gets the message "invalid system disk, replace the disk, then press play" , when booting up, he started getting it after inputting a picture from a "smart card" using his built in card reader. There is NO disk in the reader. If you hit any key the computer continues to boot "normal" It isn't a big problem, but a sign of something not being right.
View 8 Replies
View Related
Nov 22, 2008
Insert any USB device to this computer, Computer keeps restarting and it wont stop doing that until I remove the usb device. I tried with all the usb ports on this computer and problem is the same. Even by hooking up a usb keyboard or mouse, computer wont get to the login screen. it keeps on restarting. It wont even go into 'safe mode'.Anyone have any clue whats going on and the solution to fix it?
View 2 Replies
View Related
Jan 15, 2006
Have been constructing a new pc. everything is in place, and every component is definately compatible with one another. the problem is when i try to install XP, i am able to load the windows files, including a sata driver for my 160 gb maxtor, from a floppy disk. when it prompts me to continue with installation by pressing ENTER, i press enter and the computer restarts whats all that about?
View 6 Replies
View Related
May 7, 2005
I'd gladly search the archives if I only knew what to call this!Several months ago I requested a feature that prompted W2000 to request that I re-insert the install disk. I did so, but the feature/dll/driver whatever it was (I forget) was not on the disk.Now, whenever I start my machine it stubbornly requests that I insert the install disk. I installed a cool little startup utility by Mike Lin, but am not sure what to turn off.
View 3 Replies
View Related
Sep 30, 2010
i m facing problem and i m getrting message as system disk error what i should do now
View 1 Replies
View Related
Sep 22, 2005
After formatting and installing W2k on a DEll 4100 PIII I'm getting the 'new device found' wizard and it says I have a PCI device not being found.. But all my devices are working (i.e. modem, sound card etc.) When I right click on properties in the device manager it says "PCI Bus 0, device 31, function 3" Anyone know how I can tell what device it's finding and can't locate a driver for?
View 2 Replies
View Related
Aug 9, 2005
A friend of mine gave me a few computers- because his office was upgrading all of their systems- I reformatted many of them and installed windows me (they are too slow to support xp), but I am having a problem with one. Originally it had windows 2000 pro as the os( I didn't have the password to log-into the computer) So I ran fdisk, formatted the hard drive, then tried to install the new os but I keep getting the error message upon booting that "invalid system disk, remove then press any key to continue".
I thought the cd-rom was bad so I replaced it, I changed the boot sequence, used a floppy to boot, even got the hard drive manufacturer's utility program to prep the drive for the os but even that doesn't work. Am I missing something? Does the fact that I didn't have the password to enter the computer have anything to do with this? I used this same method for installing me on all the other systems and they are fine, but this one is an issue.
View 8 Replies
View Related
Jun 27, 2010
A Disk Read Error Occurred. Press CTRL+ALT+DEL to restartThis is what my compaq lap top is saying upon restart. Using XP, I do not have any recovery or diagnostic disks.I have a new laptop and was using the compaq as a back- up. I hadn't used it much in the last month or so and when I turned it on, it was unusually slow.I attempted to defrag the hard drive, and it initialized(after it analyzed). During this time windows shut it down for an update to take effect. Upon restart, this is the message I got: A Disk Read Error Occurred. Press CTRL+ALT+DEL to restart.
View 7 Replies
View Related
Dec 17, 2007
I haven't installed anything new on my computer but today after having my computer shipped to me via UPS I cut on my computer and where the XP load bar screen was I got: "reboot and select proper boot device or insert boot media in selected boot device".Seeing this I knew I went into the BIOS setup and tried to turn the system priority to look at the HDD. Instead I only had the option of the DVD drive and the CD drive.I have no idea how to solve this problem and don't have any of the recovery CD's. I DO NOT WANT TO REFORMAT because like a bad little boy I did not backup my 4 years worth of work.
View 9 Replies
View Related
Jul 15, 2005
I have installed a targus 7 port powered USB HUB on my computer. Device manager reports unknown device. I have deleted and it restalled the drived after the system rebooted. Device manager still saying unknown device. Their is not driver needed according to the manufacture. When the PC is booting it does see the IPOD mini and the Flash drive. But once the PC is fully out and login and I look a the device manager is still reporting unlnown device error (code 10).
View 1 Replies
View Related
Aug 4, 2010
I had some trouble last night and today with getting rid of a virus. Now that it is gone, I am having sound problems (maybe related, maybe not). This morning, when I opened iTunes I got a message that there was no audio device detected. After trying several things, I rebooted. Magically, I could play music again. However, a short while later, I again got an error message telling me that there is no audio device found, even though it shows up in Device Manager as working properly. The problem goes away for a short time after I reboot, but returns. It is Realtek AC 97. Why won't my computer keep recognizing it? (It tried going to Realtek's site to download an update. It has updates for Windows 98, 95, etc., but not for XP. Or at least I couldn't find it.)
View 6 Replies
View Related
Mar 19, 2008
I got a problem
I use a developer program to make executables (hobby of mine saves me going troppo) called Clarion, it works OK, I made a DOSable program with it, it works OK.
Once I could open to full size DOS screen by pressing the Alt+Enter keys and it would stay open until I was finished with it, then I could revert back to a small screen by pressing Alt+Enter keys again.
Now if I press Alt+Enter keys the DOS screen appears, but it stays open in full screen for a couple of seconds then automatically closes back to the usual small screen.
I have tried right clicking on the icon, properties, screen and putting a dot in the full size option, but this does not work.
I have scanned my PC for viruses etc but no joy there.
I have Dialup only, so don't ask me to do a Panda or Trend scan as they drop you if you no got broadband.
I'm using XP pro, 512meg ram, using a Gigabyte MB, and Nivida video card.
XP working OK-dokie, sound ok-dokie, video ok-dokie, screen to DOS wonkie.
how to fix this?
View 1 Replies
View Related
Jul 15, 2009
Im trying to repair install windows XP on my computer.I get up to the actual instalation part and it gives me this message:'Please insert the Compact Disk labeled ' VIA AGP Filter Driver Disk' into your CDROM drive (and then click OK. You can also click OK if you want files to be copied from an alternate location, such as a floppy disk'If i click cancel my mouse locks up and my screen flashes on and off and when i reboot it starts up the installation normally again but gives me this message halfway through the instalation.
View 2 Replies
View Related
May 2, 2006
In windows XP Pro. Error message: there is no disk in drive Please insert disk. (Refering to A drive). this happened after trouble with an old cable. Replaced the cable and this message pops up on boot.
View 3 Replies
View Related
Sep 15, 2009
I have created a Bart PE bootable XP cd. I can boot into windows using this CD I would like to know how to copy the data in my hard disk to pen drive or flash drive.
View 11 Replies
View Related
May 25, 2008
My sister had a nasty infection, including vundo and many others, some of which I could remove, many of which I couldn't using Spybot, Ad-aware, Trend Micro, Vundofix, etc. Because she only has pictures on her computer anyways, I've decided to reformat, and moved all her files to my computer. I've changed the Bios screen to boot from the cd, and popped it in, and I keep getting the message: No Bootable Device -- strike f1 to reboot, f2 for setup utility. I'm stuck and haven't been able to find any similar situation on the internet. The rescue disks are a set of 3 disks that came with my computer from Future Shop, burned with "dv6113" written on them.
View 5 Replies
View Related
Dec 15, 2006
I tried to run a knoppix (live linux distro) cd and changed the boot order (F2 setup) to boot from cd. Ok... the cd still wouldnt boot, so I went into F2 again and made all devices non-bootable except the cd player. When I tried this method... I was informed that my cd drive isnt a bootable device. I checked a few settings but couldnt find anything in regards to this. Im just trying to boot from my cd player.
View 12 Replies
View Related
Aug 9, 2005
the windows will freeze after running 2 hours with doing nothing. when it is booting up, there is a messages says: Hardware Monitor Found an error, Enter Power Setup menu for details. Now, I enter the BIOS in Power Menu, everything seems fine.I took out one memory stick, It ran fine until I reformatted the harddisk. and all the mistakes come out after i formatted the hardisk? How can there be an explanation?
View 11 Replies
View Related
Sep 8, 2009
Yesterday and all day today every time that I boot my system I get a pop up saying: Attempting Boot from USB Device Non-system disk or disk error replace and press any key when ready. I can log on my system by pressing F9 and the options that I have are
CD-ROM
USB Device
Hard Drive
the Hard Drive is the only one that lets me log on my system, the other choices only take me back to the same pop up message.
View 11 Replies
View Related
Apr 8, 2006
I have tried putting in my windows disk but it still comes back I have been told to post a log generated by hijack this so here it is.
View 2 Replies
View Related
