Have been constructing a new pc. everything is in place, and every component is definately compatible with one another. the problem is when i try to install XP, i am able to load the windows files, including a sata driver for my 160 gb maxtor, from a floppy disk. when it prompts me to continue with installation by pressing ENTER, i press enter and the computer restarts whats all that about?
View 6 RepliesMy computer will not shut down. When I hit the "start" button and then select "shutdown" it goes through all of the motions, but then it reboots. It is almost as though it thinks that I am hitting the "restart" button instead of the "shutdown" button. When I followed the checklist in Windows, it suggested a restore point. I tried that but it said that I had made no changes to the computer since that restore point and therefore I could not use the restore point technique.
View 7 Replies View RelatedSo I'm having a bit of a nightmare trying to get my copy of XP to boot.Every thing was working fine and then I tried to make a back up image of my drive using Norton Ghost 2003. I have a 200Gb Wester Digital SATA drive and an Asus A8n-SLI mobo. I think that there might have been some problem with the nVidia IDE/SATA drivers as ghost crashed half way thorugh the image making process. Now when I try to boot I get a "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER"
View 4 Replies View RelatedFor some reason my other computer i dont understand it alot but when it comes to a Disk Boot Failur, enter system disk and press enter i usually just shutdown computer plug out the wait around 5-10mins but for this time it has really driven me up the wall. at the moment now it hasnt worked and im asking for help here are some of the things i did... like i said before jst left it and wait... putting OS disk in and try to repair didnt work... try to reinstall didnt work it said it cant OS system something like that... changing my boot system to have HDD first and than CD-ROM than floppy (yes i do have a floppy drive).. but one thing it had told me Win XP when i first tried to repair it it said you have to quite when it count down on when to reboot it said if you have a floopy disk unplug it out and i did it and still not working.
View 7 Replies View RelatedWhen I try to boot Windows XP it says "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER" What do I do?
View 3 Replies View RelatedI have given my 40GB ATA HDD to my friend to fetch some movies he has got in his 160GB SATA HDD. He configured my HDD as secondary master and copied all the movies to mine. Later he removed my HDD and rebooted the system to find that his HDD isn't booting up. He says that his HDD isn't being detected in the BIOS. The well known error message "No bootable device found. Insert system disk and press Enter" appears every time he tries to boot his system. What can the solution other than formatting?( Formatting isn't favourable as there is critical data in the HDD).
View 4 Replies View RelatedI got problem with his desktop XP SP2 , when he starts the PC it boots normally till it reaches where it shows windows XP logo then the screen gets blank (i.e he can not see the login name for users). What he used to do: is press the sleep button on the wireless keyboard, then after that press the hardware switch on/off button (not the reset button) on the tower of the hard box. After pressing switch on/off button, he gets directly (pay attention to this) to the login screen where he can see the usernames for all users. He has to do this procedure every time he would like to boot the desktop
View 1 Replies View Relatedwhen v press the power button of a system for some seconds it shuts down. but is this way good for the system? i have tried several times but did not check for errors in the drive when i started the system again so can i go ahead, switching off the sys. using the above method?
View 4 Replies View RelatedI have been experiencing this for the last few weeks. Whenever I press the delete button to delete a file from a folder, the windows explorer freezes and then I have to go to task manager to end this.
View 8 Replies View RelatedI use Windows XP home edition. My computer locks up every now and then, the mouse, keyboard, everything. The only way to recover it is to press the reset button. It may go for days and have no problems, then may lock up several times in one day. Than it might go for days again with no problems. It happens a lot when you are playing the windows games, but it will also do it sometimes with other programs. I have looked everywhere to try and figure it out, but I have had no luck. Do you have any ideas what might be causing this or where I can look to correct this problem?
View 2 Replies View RelatedI cannot enter to command prompt at my computer running windows xp.Whenever I try to enter command prompt, my computer unexpectedly restart.
View 8 Replies View RelatedI was getting the message "ntldr is missing-press any key to restart". I was able to fix that through trail and error. After I restarted my computer I got the message "disc error". Would someone be able to help out. I am running Windows XP.
View 3 Replies View RelatedI just reformatted my 20G HD. I have an Intel D845GLLY motherboard with a Pentium 4 processor. When I try to load Windows XP Pro from the installation disk it says "NTLDR is missing", so either it is not on my installation cd, or most likely the files are corrupt. I got my XP Pro from the MSDAA; I am in school to be a Computer Forensic Specialist. So, I got a floppy disk and copied NTLDR, NTDETECT, and boot.ini to it. When I put the floppy in my computer though, it says that it is not bootable. How do I get those (3) files on my computer that has been formatted? Are there other files that I need on my floppy.
I got a problem
I use a developer program to make executables (hobby of mine saves me going troppo) called Clarion, it works OK, I made a DOSable program with it, it works OK.
Once I could open to full size DOS screen by pressing the Alt+Enter keys and it would stay open until I was finished with it, then I could revert back to a small screen by pressing Alt+Enter keys again.
Now if I press Alt+Enter keys the DOS screen appears, but it stays open in full screen for a couple of seconds then automatically closes back to the usual small screen.
I have tried right clicking on the icon, properties, screen and putting a dot in the full size option, but this does not work.
I have scanned my PC for viruses etc but no joy there.
I have Dialup only, so don't ask me to do a Panda or Trend scan as they drop you if you no got broadband.
I'm using XP pro, 512meg ram, using a Gigabyte MB, and Nivida video card.
XP working OK-dokie, sound ok-dokie, video ok-dokie, screen to DOS wonkie.
how to fix this?
first i get the HP blue screen. I tried F1, but i dont see my hard drive in the boot menu. I followed some steps in Hp's web site- took the cpu apart and unplugged both hard drives from the motherboard, plugged them back in. when i restarted ,i got the HP screen and then windows started to load up. After a few seconds the HP screen came back up and then the black screen: sk boot failure, insert system disk and press enter. I also noticed that pressing F10 for system recovery does nothing.
View 3 Replies View RelatedGetting error message when trying to change out a 10 gig to a 250.NVIDIA Boot Agent 201.0462 PXE-E61: Media Test Failure, check cable PXE-M0F: Exiting NVIDIA Boot Agent DISK BOOT FAILUR, INSERT SYSTEM DISK AND PRESS ENTER" this drive I am upgrading also has Windows XP OS. I have another drive on the computer that has 160g.
View 13 Replies View RelatedMy computer was working perfectly well. I left it on and went out. When I came back it had a black screen saying "boot disk error, insert system disk and press enter" in BIOS. This has happened before but I just hit my pc then rebooted then no problem. This time it didnt work, I have tried to vacuum the interior of my pc but to no avail.
View 9 Replies View RelatedI have a dwsktop vaio When I boot from cold it does not find hard drive. I get an error message Disk boot failure Insert system disk and press enter. If I restart the computer and go into the bios it does not show the hard drive but when I come out of the bios it then boots up.It will only bootup if I go into the bios first?
View 1 Replies View RelatedWhat can I possibly do to solve this problem? I have Windows XP and everywhere.
View 1 Replies View RelatedDisk boot insert system disk and press enter comes what do i do?
View 2 Replies View RelatedI ran a recovery on my computer and now I get a message, "NTLDR is Compressed press atl. ctrl. del to restart." When I restart it gives the same message each time.
View 7 Replies View RelatedSo i'm getting this error msg when I boot up Windows XP.Disc Read Error Press CTRL-ALT-DEL to restart. I do it but then it just comes up with that screen again.I have tried countless of times but it doesn't want to seem to work.This started happening after a game crash. Of artifacting and overheating and all that. So right now i'm using Ubuntu but it sucks. I hate it. I'm getting artifacts all over the screen. It's driving me insane. I can't seem to go into Windows Safe Mode either like trying to press F8 and all that. Otherwise, I would have tried to do a System Restore.
View 14 Replies View RelatedWhen resuming from hibernate or standby it made a clunking noise like it was trying to find something and then displays: Press CTRL+ALT+DEL to Restart. Sometimes it worked, others not. I then found that it was displaying the NTLDR error so I backed up everything did a destructive recovery and started doing all the new updates for Windows, etc. Seemed to be working fine and then I added two additional hard drives (one for backup and the other for recording TV). I sent it to hibernate and the next day I tried to startup and couldn't get the OS to load at all. I finally did a recovery to one of the other hard drives. I did all the updates, added some new programs and set Media Center to record. I put the machine in hibernate and left. When I returned the machine was on and the TV recording was executed as programmed. I put the machine in hibernate again last night and when I awoke the machine was running. I had not set a recording so I'm wondering why it would spontaneously restart for no apparent reason.
View 3 Replies View RelatedA Disk Read Error Has Occurred Press ctrl alt del to restart I keep getting that message when i turn on my computer its been like that for the past few days. Im Using windows XP Bell system optiplex 170L series Bios version A07 I can access the setup menu and the boot menu but idk what to do. im a computer noob.
View 4 Replies View RelatedA Disk Read Error Occurred. Press CTRL+ALT+DEL to restartThis is what my compaq lap top is saying upon restart. Using XP, I do not have any recovery or diagnostic disks.I have a new laptop and was using the compaq as a back- up. I hadn't used it much in the last month or so and when I turned it on, it was unusually slow.I attempted to defrag the hard drive, and it initialized(after it analyzed). During this time windows shut it down for an update to take effect. Upon restart, this is the message I got: A Disk Read Error Occurred. Press CTRL+ALT+DEL to restart.
View 7 Replies View RelatedI'm running Windows XP on a EMachines PC. The PC is only a little over a year old. Suddenly tonight I have what appears to be a DOS screen that says "A Disk Read Error Occurred. Press CTRL+ALT+DEL to restart". After doing a ctrl alt delete, I keep getting the same screen again. Can anyone shed some light on how to restart my PC? Is the hard drive shot?
View 14 Replies View RelatedWhen I start up, I get a black screen with this: Disk read error occurred Press Ctrl+Alt+Delete to restart So I do. Same thing happens. I don't have any CDs or anything in the drive. The computer had also been shutting down randomly on me prior to this.
View 2 Replies View RelatedI have reviewed the following thread and discovered that the solution does not work on my WinXP Pro SP2 computer.Solved: XP shut down window Jag11 in post#3 of the thread and the original poster applied this fix which worked for the original poster, CactusJack: Control Panel>User Accounts Click Change the way users log on or off, tick the Use the Welcome screen, then click Apply Options.When I click on Start, there are only two buttons at the bottom: Log Off and Turn Off Computer, and no green icon for Restart. The green icon can be found when the Turn Off Computer icon is pressed and appears to the right of Stand by and Turn Off icons in the displayed window (Turn off computer) at the center of the screen.Is there a fix for this problem - i.e. how do I get the Restart icon back at the botton of the Start button display? Or, is this how WinXP Pro SP2 is normally, and not considered a problem?
View 1 Replies View Relatedwindow loads, sits, finally other half will load, mouse just doesn't seem to do anything so you click again and 3 minutes later 2 of whatever will finally open... just annoying crap really A few days ago comcast went off and I had to unplug modem, wait, then plug back up and restart system. I got a "Disk read error press control, alt, delete, to restart"
error, tried that same thing so I shut down and when I turned back on it booted fine. I have since moved... just set up the system and am getting the same error except this time shutdown/restart isn't working ( The OTHER problem I realize is this... this is a tempory move! Most everything I own is in a storage unit, boxes to the back, furniture to the front and guess where my disks are? Right! I put printer, shredder, disks, everything I didn't just HAVE to have in the storage unit.
I've been messing with and Googling this problem all day and am stumped My laptop:
Toshiba A105-S4134 XP SP2 MCE 2005 Intel T2400 Duo Core 2 GB RAM1. Two days ago I had a glitch - a bunch of browser windows were open and the system just sort of froze up. I ended up doing a hard restart. The PC then took a longer than normal time to boot back up.2. That made me nervous, so yesterday I made True Image images of both partitions on the HD, that is C: (OS and apps) and D: (data).3. This morning I decided to run a memory diagnostic disk (I had memtest86+ and Windows Diagnostics CDs on hand). I set boot priority to CD/DVD ROM using Start > All Programs > Toshiba > Utilities > Toshiba Assist > Optimize > Toshiba Hardware Settings
when i turn my computer on it's just a black screen saying "press f1 to reboot or f2 to set up" I press reboot and the message appears again.
View 1 Replies View Related