Getting Disk Read Error And System Asking To Press CTRL+ALT+DEL To Restart?
Jun 27, 2010
A Disk Read Error Occurred. Press CTRL+ALT+DEL to restartThis is what my compaq lap top is saying upon restart. Using XP, I do not have any recovery or diagnostic disks.I have a new laptop and was using the compaq as a back- up. I hadn't used it much in the last month or so and when I turned it on, it was unusually slow.I attempted to defrag the hard drive, and it initialized(after it analyzed). During this time windows shut it down for an update to take effect. Upon restart, this is the message I got: A Disk Read Error Occurred. Press CTRL+ALT+DEL to restart.
A Disk Read Error Has Occurred Press ctrl alt del to restart I keep getting that message when i turn on my computer its been like that for the past few days. Im Using windows XP Bell system optiplex 170L series Bios version A07 I can access the setup menu and the boot menu but idk what to do. im a computer noob.
I'm running Windows XP on a EMachines PC. The PC is only a little over a year old. Suddenly tonight I have what appears to be a DOS screen that says "A Disk Read Error Occurred. Press CTRL+ALT+DEL to restart". After doing a ctrl alt delete, I keep getting the same screen again. Can anyone shed some light on how to restart my PC? Is the hard drive shot?
So i'm getting this error msg when I boot up Windows XP.Disc Read Error Press CTRL-ALT-DEL to restart. I do it but then it just comes up with that screen again.I have tried countless of times but it doesn't want to seem to work.This started happening after a game crash. Of artifacting and overheating and all that. So right now i'm using Ubuntu but it sucks. I hate it. I'm getting artifacts all over the screen. It's driving me insane. I can't seem to go into Windows Safe Mode either like trying to press F8 and all that. Otherwise, I would have tried to do a System Restore.
i recently attempted to format my computer as it was going very slowly, i did the usual process of inserting the recovery cd's which came with the computer however this time the process did not complete, i left it for over an hour and the screen still remained the same. I decided to restart the computer and a message keeps coming up, disk read error press ctrl alt delete. I tried formatting again but all i get is a blank screen even before its begun, i tried using windows xp cd's
My computer has recently started giving me an error message that says "A disk read error occurred. Press CTRL-ALT-DEL to restart." during startup. The first time this came up I took it into the repair shop the morning after. They turned the computer on, it started normally, and after keeping it overnight they returned it to me saying that they could find nothing wrong with it.It worked normally for about 2 days after that and then when I was using it the system suddenly became unresponsive. I was forced to turn it off via the button on the front of my tower, and when I turned it back on the disk read error message came back up. The next morning when I turned it on it was fine.
window loads, sits, finally other half will load, mouse just doesn't seem to do anything so you click again and 3 minutes later 2 of whatever will finally open... just annoying crap really A few days ago comcast went off and I had to unplug modem, wait, then plug back up and restart system. I got a "Disk read error press control, alt, delete, to restart" error, tried that same thing so I shut down and when I turned back on it booted fine. I have since moved... just set up the system and am getting the same error except this time shutdown/restart isn't working ( The OTHER problem I realize is this... this is a tempory move! Most everything I own is in a storage unit, boxes to the back, furniture to the front and guess where my disks are? Right! I put printer, shredder, disks, everything I didn't just HAVE to have in the storage unit.
When I start up, I get a black screen with this: Disk read error occurred Press Ctrl+Alt+Delete to restart So I do. Same thing happens. I don't have any CDs or anything in the drive. The computer had also been shutting down randomly on me prior to this.
I just reformatted my 20G HD. I have an Intel D845GLLY motherboard with a Pentium 4 processor. When I try to load Windows XP Pro from the installation disk it says "NTLDR is missing", so either it is not on my installation cd, or most likely the files are corrupt. I got my XP Pro from the MSDAA; I am in school to be a Computer Forensic Specialist. So, I got a floppy disk and copied NTLDR, NTDETECT, and boot.ini to it. When I put the floppy in my computer though, it says that it is not bootable. How do I get those (3) files on my computer that has been formatted? Are there other files that I need on my floppy.
I ran a recovery on my computer and now I get a message, "NTLDR is Compressed press atl. ctrl. del to restart." When I restart it gives the same message each time.
When resuming from hibernate or standby it made a clunking noise like it was trying to find something and then displays: Press CTRL+ALT+DEL to Restart. Sometimes it worked, others not. I then found that it was displaying the NTLDR error so I backed up everything did a destructive recovery and started doing all the new updates for Windows, etc. Seemed to be working fine and then I added two additional hard drives (one for backup and the other for recording TV). I sent it to hibernate and the next day I tried to startup and couldn't get the OS to load at all. I finally did a recovery to one of the other hard drives. I did all the updates, added some new programs and set Media Center to record. I put the machine in hibernate and left. When I returned the machine was on and the TV recording was executed as programmed. I put the machine in hibernate again last night and when I awoke the machine was running. I had not set a recording so I'm wondering why it would spontaneously restart for no apparent reason.
My computer was working perfectly well. I left it on and went out. When I came back it had a black screen saying "boot disk error, insert system disk and press enter" in BIOS. This has happened before but I just hit my pc then rebooted then no problem. This time it didnt work, I have tried to vacuum the interior of my pc but to no avail.
My son gets the message "invalid system disk, replace the disk, then press play" , when booting up, he started getting it after inputting a picture from a "smart card" using his built in card reader. There is NO disk in the reader. If you hit any key the computer continues to boot "normal" It isn't a big problem, but a sign of something not being right.
My computer will not shut down. When I hit the "start" button and then select "shutdown" it goes through all of the motions, but then it reboots. It is almost as though it thinks that I am hitting the "restart" button instead of the "shutdown" button. When I followed the checklist in Windows, it suggested a restore point. I tried that but it said that I had made no changes to the computer since that restore point and therefore I could not use the restore point technique.
when running chkdsk /f at command prompt in windows, i get the message about drive being in use, would you like to run chkdsk after next restart. I choose yes and restart the computer. But, after chkdsk runs, I dont have time to read the results as it quickly continues to load the OS when it is finished. Chkdsk (without /f) in cmd in windows tells me there is a problem with my file system although I do not have any bad sectors. I have run chkdsk /f (after restart) twice and it still has not fixed whatever the error is.
Getting error message when trying to change out a 10 gig to a 250.NVIDIA Boot Agent 201.0462 PXE-E61: Media Test Failure, check cable PXE-M0F: Exiting NVIDIA Boot Agent DISK BOOT FAILUR, INSERT SYSTEM DISK AND PRESS ENTER" this drive I am upgrading also has Windows XP OS. I have another drive on the computer that has 160g.
I have had XP Home installed on a new Seagate hard drive for about 2 months. Suddenly, the computer did a restart and now it will not open Windows. It finds all my drives and then goes to a screen displaying "a disc read error has occured. Press control, alt, delete to restart." On restart, I receive the same message. I have tried checkdisc, fix boot and fix master boot record in the recovery console on my cd but nothing works. Is this a problem with the hard drive or Windows? Any suggestions would be helpful. I would hate to have to reinstall Windows.
I have not tested this with any version of Windows XP besides XP Pro. It might work in Home Edition or other versions.If you do this, then you will get the "Press Ctrl-Alt-Delete to begin" box when you turn on your computer, before it asks for your username and password. It also asks for you to press Ctrl-Alt-Del before you can unlock your computer if you lock it. This is done by default in Windows 2000 Server or Windows Server 2003.
I have a dwsktop vaio When I boot from cold it does not find hard drive. I get an error message Disk boot failure Insert system disk and press enter. If I restart the computer and go into the bios it does not show the hard drive but when I come out of the bios it then boots up.It will only bootup if I go into the bios first?
I'm using a pentium3, micronpc. I'm running on xp pro. press alt+Ctrl+Del for the pc to continue start-up. I've already gone into the BIOS settings and changed the boot sequence around but it's still not conrected the problem.
When I press Alt + Ctrl + Delete in my office iam getiing an option to lock the windows , but when i do the same in my house i straight away get the task manager. Is there anything that i can do in windows to get that option . I have windows XP OS .
When I press CTRL+ALT+DEL the task manager appears for a second, then minimizes itself to the icon tray. When I position the mouse over the icon it disappears. I've run Norton Antivirus, Ad-aware, Spy Sweeper and Microsoft Anti Spyware, but none of them identify a virus relating to this problem.
I've started getting "a disk read error occurred press ctrl + alt + del to restart" on my nearly new alienware bot. i have to use power button to turn off systm, then turn it back on to get it to work.
Upon starting up a Gateway LX laptop, I receive a "A disk read error has occured, press CTRL + ALT + DELETE to restart." Instantly, I know this is bad. So I load in the Windows XP Home disk and boot from the CD. I go to repair and recovery and the console opens up. I run chkdsk and it stop at 13%. Any suggestions. Is the hard drive done? I have backups, I'm just wondering if it's time for a new hard drive.
A friend of mine gave me a few computers- because his office was upgrading all of their systems- I reformatted many of them and installed windows me (they are too slow to support xp), but I am having a problem with one. Originally it had windows 2000 pro as the os( I didn't have the password to log-into the computer) So I ran fdisk, formatted the hard drive, then tried to install the new os but I keep getting the error message upon booting that "invalid system disk, remove then press any key to continue".
I thought the cd-rom was bad so I replaced it, I changed the boot sequence, used a floppy to boot, even got the hard drive manufacturer's utility program to prep the drive for the os but even that doesn't work. Am I missing something? Does the fact that I didn't have the password to enter the computer have anything to do with this? I used this same method for installing me on all the other systems and they are fine, but this one is an issue.
I've been trying to rebuild my friend's PC for ages now and every time I get past the initial part of setup (boot from CD, create partition, copy files, reboot) I get this error message.I've done everything I can think off:I still get the same error message when I replace the hard drive with a new one.And I've read about a billion articles about this but none of them have the same solution.
Custom built system, Primary IDE connects to HDD Hitachi, Seconday IDE connects to Master DVD Burner 1.I opened my case, put in a 2nd DVD Burner in on Secondary IDE Slave. Fired the machine up, and the entire Secondary IDE fails to pick up both DVD's.I put it back the way it was, I swapped cables, ran the HDD from secondary IDE, tested the DVD's on the Primary IDE, and my conclusion is that I've somehow damaged the Secondary IDE from picking up any device.Now I am running the new DVD burner as Primary Slave and the HDD as Primary Master, I boot up and get
I just reformatted my hard drive using Windows XP re-installation CD. After successfully formatting and installing xp, it goes to restart to continue with the setup. Once it starts to boot it says that press any key to boot from cd but I don't do anything cause it's not supposed to so it try's to boot from hard drive but says: Disk read error Press ctrl + alt + del to restart. I don't understand whats up. I had Windows 7 installed before but do to unfortunate circumstances I have to install XP for now, but I can't complete the installation.Priority Boot Sequence:1.CD 2. Hard Drive.
