My son gets the message "invalid system disk, replace the disk, then press play" , when booting up, he started getting it after inputting a picture from a "smart card" using his built in card reader. There is NO disk in the reader. If you hit any key the computer continues to boot "normal" It isn't a big problem, but a sign of something not being right.
View 8 RepliesI recently formatted my drive and am trying to reinstall my WIndows XP Pro.When I put in the CD and the PC starts up I receive a message: "Invalid System Disk. Replace the disk and then press any key"I have already changed my BIOS so that it boots from the CD first. Not sure what the problem is? prior to that error message, it states that I should "press any key to boot from CD"...when I try to push a key nothing happens. I know my keyboard works since I used it to enter the BIOS.
View 5 Replies View RelatedA family member of mine has formatted the Hard Drive on their PC and when I they try to load windows XP it comes up with "Invalid System Disk, Replace Disk and Press Any Key"Do I need a boot disk and If I do What sort and where do I get it from.
View 7 Replies View RelatedA friend of mine gave me a few computers- because his office was upgrading all of their systems- I reformatted many of them and installed windows me (they are too slow to support xp), but I am having a problem with one. Originally it had windows 2000 pro as the os( I didn't have the password to log-into the computer) So I ran fdisk, formatted the hard drive, then tried to install the new os but I keep getting the error message upon booting that "invalid system disk, remove then press any key to continue".
I thought the cd-rom was bad so I replaced it, I changed the boot sequence, used a floppy to boot, even got the hard drive manufacturer's utility program to prep the drive for the os but even that doesn't work. Am I missing something? Does the fact that I didn't have the password to enter the computer have anything to do with this? I used this same method for installing me on all the other systems and they are fine, but this one is an issue.
My computer was working perfectly well. I left it on and went out. When I came back it had a black screen saying "boot disk error, insert system disk and press enter" in BIOS. This has happened before but I just hit my pc then rebooted then no problem. This time it didnt work, I have tried to vacuum the interior of my pc but to no avail.
View 9 Replies View RelatedI have a Dell Dimension L866r with 512 mb. of ram . I have my bios set to boot from CDrom first, then my harddrive. When I boot my computer up with the XP Home disk in it all I get is Invalid System disk.
View 2 Replies View RelatedGetting error message when trying to change out a 10 gig to a 250.NVIDIA Boot Agent 201.0462 PXE-E61: Media Test Failure, check cable PXE-M0F: Exiting NVIDIA Boot Agent DISK BOOT FAILUR, INSERT SYSTEM DISK AND PRESS ENTER" this drive I am upgrading also has Windows XP OS. I have another drive on the computer that has 160g.
View 13 Replies View RelatedWhat can I possibly do to solve this problem? I have Windows XP and everywhere.
View 1 Replies View RelatedI left my computer on for about 3 hours, when I returned the screen was black with the a message First time this happened INVALID System Disk Replace Disk and then press any key There is or was no 3 1/2 floppy disk in the computer. Every time I hit any key nothing would happen. When I would reboot I would get to the same screen with the same message and nothing would happen. Then I would reboot again and when that screen would come our I would insert a 3 1/2 Floppy into the computer and the computer would start up. So now the only time I can get the computer to start up I must insert a 3 1/2 floppy.
View 1 Replies View RelatedDisk boot insert system disk and press enter comes what do i do?
View 2 Replies View RelatedA Disk Read Error Occurred. Press CTRL+ALT+DEL to restartThis is what my compaq lap top is saying upon restart. Using XP, I do not have any recovery or diagnostic disks.I have a new laptop and was using the compaq as a back- up. I hadn't used it much in the last month or so and when I turned it on, it was unusually slow.I attempted to defrag the hard drive, and it initialized(after it analyzed). During this time windows shut it down for an update to take effect. Upon restart, this is the message I got: A Disk Read Error Occurred. Press CTRL+ALT+DEL to restart.
View 7 Replies View RelatedAn external hard drive. When it is on & I try to boot,I get the following error : Invalid system disk Replace the disk, and then press any key I then have to turn off the external & press any key to get it to boot. Is there a way that I can boot with that external turned on. Some setting I need to change perhaps? I have an E-Machines computer about 2 years old.
View 6 Replies View RelatedFor some reason my other computer i dont understand it alot but when it comes to a Disk Boot Failur, enter system disk and press enter i usually just shutdown computer plug out the wait around 5-10mins but for this time it has really driven me up the wall. at the moment now it hasnt worked and im asking for help here are some of the things i did... like i said before jst left it and wait... putting OS disk in and try to repair didnt work... try to reinstall didnt work it said it cant OS system something like that... changing my boot system to have HDD first and than CD-ROM than floppy (yes i do have a floppy drive).. but one thing it had told me Win XP when i first tried to repair it it said you have to quite when it count down on when to reboot it said if you have a floopy disk unplug it out and i did it and still not working.
View 7 Replies View RelatedI think I got virus, even though norton work 2004 cant dectected but everytime startup its say that (invalid boot disk...please insert...) and I have to put in my winxp in cd drive to boot up. I been format the disk and reinstall win but it don't help. I think some how my NTLDR got corrupted? but not just that one drive, I change to another smaller (4.0G) drive that got nothing but Winxp Pro and it's say the same. Winxp Pro 3.0g mhz 340g Hd.
View 2 Replies View Relatedwindow loads, sits, finally other half will load, mouse just doesn't seem to do anything so you click again and 3 minutes later 2 of whatever will finally open... just annoying crap really A few days ago comcast went off and I had to unplug modem, wait, then plug back up and restart system. I got a "Disk read error press control, alt, delete, to restart"
error, tried that same thing so I shut down and when I turned back on it booted fine. I have since moved... just set up the system and am getting the same error except this time shutdown/restart isn't working ( The OTHER problem I realize is this... this is a tempory move! Most everything I own is in a storage unit, boxes to the back, furniture to the front and guess where my disks are? Right! I put printer, shredder, disks, everything I didn't just HAVE to have in the storage unit.
I am getting this error message when I start windows XP Home, It says Replace the disk and press any key On doing so it starts normally.othing is in the CD drives and floppy is disabled in Bios.Booting is from the second hard disk - partition 2.
View 12 Replies View RelatedMy XP desktop was in the middle of running CHKDSK when there was a power outage. Since then the computer will not start-up. It begins the usual POST, recognizing the drives then it comes to a screen saying Invalid System Disk, Replace the disk and then press any key.There are no disks in any of the CD/DVD drives. I have tried the recovery disk and even a full version XP disk, but nothing seems to be "seen". I get the same screen every time.
View 4 Replies View RelatedA Disk Read Error Has Occurred Press ctrl alt del to restart I keep getting that message when i turn on my computer its been like that for the past few days. Im Using windows XP Bell system optiplex 170L series Bios version A07 I can access the setup menu and the boot menu but idk what to do. im a computer noob.
View 4 Replies View RelatedI'm running Windows XP on a EMachines PC. The PC is only a little over a year old. Suddenly tonight I have what appears to be a DOS screen that says "A Disk Read Error Occurred. Press CTRL+ALT+DEL to restart". After doing a ctrl alt delete, I keep getting the same screen again. Can anyone shed some light on how to restart my PC? Is the hard drive shot?
View 14 Replies View RelatedI have a Hewlet packard computer here, the mother board is a n1996, th eoperating system is ME. The computer justwill not boot at all., it gets to the ME Logo and th escreene just goes black. I can satrt it in safe mode, but i cannot restore it to an earlier date, no mater which date i choose, i just get the mnessage can not restore. I want to, reformat and install XP home, but the CD ROM does not show in my computer and it does not see the disk when i put it in. Also i tried to boot from a Woindows 98boot disk, and themn i get the message non system disk, replace and press any leter to continue.
View 1 Replies View RelatedI just had Win 98 on my computer, but reformatted because I wished to start anew with Windows XP. The format went well, but I'm having trouble installing XP now. When I start up the computer with the setup disk in the disc drive, it tells me it's an invalid system disk.My problem is I just can't seem to get the setup to run... I dunno am I doing something wrong or is there something I'm not doing that I should be doing? I figured with the cd in the drive it would automatically start the setup
View 5 Replies View RelatedWhen I start up, I get a black screen with this: Disk read error occurred Press Ctrl+Alt+Delete to restart So I do. Same thing happens. I don't have any CDs or anything in the drive. The computer had also been shutting down randomly on me prior to this.
View 2 Replies View RelatedI have a problem with a Windows XP installation. The problem arose when I attached a SATA SSD with Windows 7 on it, intending to check whether the SSD had failed. The computer booted up into XP but I couldn't see the SSD in My Computer. When I restarted the computer, I received GRUB (the Linux bootloader) error 22. It is possible that Linux was active on the Windows XP HDD at some point, but it is long gone and I didn't expect to find GRUB controlling the boot. I switched off and removed the SSD drive so that the computer would, so I thought, be in the state in which it was when I approached it. I switched it on and got to GRUB error 21. I inserted my Windows XP CD-ROM and restarted, selecting the repair option. I ran CHKDSK, FIXBOOT and FIXMBR and restarted but now I get error INVALID SYSTEM DISK. INSERT SYSTEM DISK AND PRESS ENTER.
View 5 Replies View RelatedUntil recently, my computer's single 120GB hard drive has been partitioned like so:
C: - ~5GB, active partition with boot.ini etc, used as a recovery partition D: - ~110GB, extended partition with Windows Last night I finally took the plunge and, using Paragon Partition Manager, got rid of the C: partition seeing as I never used its contents, and extended the D: patition to take up the free space created. I then made the D: partition PRIMARY and ACTIVE.To boot into XP, I then used a boot disk from here.windows started fine, and everything was dandy. I copied the BOOT.ini, NTLDR, NTDETECT.COM files across to D:, removed the boot disk and rebooted.'Invalid System Disk'. I'm still unable to boot without a boot CD.
I have a dwsktop vaio When I boot from cold it does not find hard drive. I get an error message Disk boot failure Insert system disk and press enter. If I restart the computer and go into the bios it does not show the hard drive but when I come out of the bios it then boots up.It will only bootup if I go into the bios first?
View 1 Replies View RelatedI recently purchased a refurbished Dell OptiPlexGX270. It came with no OS and I am trying to install XP Home. It's using BIOS version A06. I have changed the boot order to CD, HD, and Nic.I boot up the computer and then insert the XP Home installation disk. I get the following:Intel Boot Agent GE v.1.2.21 Copyright 1997-2004, Intel Corp CLIENT MAC ADDR 0D 56 8B 36 76 GUID 444 54 C4C 5900 7053 804D B5C04F483431 PXE-E53: No boot filename received, PXE-M0E: Exiting Intel Boot Agent Invalid System Disk, replace the disk, and then press any key.
View 4 Replies View RelatedIm trying to help my dad get his computer working again. We bought the MCD's for the packard bell computer he owns and first we were struck with a glue part error 5. However we seemed to fix this through a format and re creating the hidden sector. We then ran the CD's and it went seemingly fine through the installation process, then finally we took out MCD 1 as we were told, the PC restarted and we were faced with another issue:'Invalid system Disk. Replace the disk.'Were now stuck on this. I have tried reinstalling again, also I've tried to create another bootdisk just incase but due to me having Vista I couldn't help him much there as it didn't install. I had already formatted and reinstalled the hidden partition and now im stuck as im only 16 and not very farmiliar with the boot process. So I would appreciate any help if you would be able to.
View 14 Replies View RelatedWhen I try to boot Windows XP it says "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER" What do I do?
View 3 Replies View Relatedi recently attempted to format my computer as it was going very slowly, i did the usual process of inserting the recovery cd's which came with the computer however this time the process did not complete, i left it for over an hour and the screen still remained the same. I decided to restart the computer and a message keeps coming up, disk read error press ctrl alt delete. I tried formatting again but all i get is a blank screen even before its begun, i tried using windows xp cd's
View 7 Replies View RelatedI have given my 40GB ATA HDD to my friend to fetch some movies he has got in his 160GB SATA HDD. He configured my HDD as secondary master and copied all the movies to mine. Later he removed my HDD and rebooted the system to find that his HDD isn't booting up. He says that his HDD isn't being detected in the BIOS. The well known error message "No bootable device found. Insert system disk and press Enter" appears every time he tries to boot his system. What can the solution other than formatting?( Formatting isn't favourable as there is critical data in the HDD).
View 4 Replies View Relatedi m facing problem and i m getrting message as system disk error what i should do now
View 1 Replies View Related