Packard Bell Recovery Invalid System Disk
Oct 31, 2008
Im trying to help my dad get his computer working again. We bought the MCD's for the packard bell computer he owns and first we were struck with a glue part error 5. However we seemed to fix this through a format and re creating the hidden sector. We then ran the CD's and it went seemingly fine through the installation process, then finally we took out MCD 1 as we were told, the PC restarted and we were faced with another issue:'Invalid system Disk. Replace the disk.'Were now stuck on this. I have tried reinstalling again, also I've tried to create another bootdisk just incase but due to me having Vista I couldn't help him much there as it didn't install. I had already formatted and reinstalled the hidden partition and now im stuck as im only 16 and not very farmiliar with the boot process. So I would appreciate any help if you would be able to.
View 14 Replies
ADVERTISEMENT
Oct 27, 2006
i was just using it and all of sudden it crashed and turned off i throat at first the battery was dead but then i turned it back on and it just dose nothing at all i have a choice to load ither windows xp or a recovery console and when i go into the recovery console all it says is this microsoft windows xp(TM) recovery console.the recovery console provides system repair and recovery functionality type EXIT to quit the recovery console and restart the computer .1: c:windows Wich windows installer would u like to log onto (to cancle, press ENTERafter this i pressed 1 and then it said the following:type the administrator password:Now i have no administrator password
View 5 Replies
View Related
Feb 23, 2009
Is it possible to increase USB 1.1 to 2.0? My Packard Bell Easynote R4622 only shows 1.1, but it doesn't seem old enough to only have 1.1s
View 7 Replies
View Related
Aug 5, 2010
I recently Formatted my Packard Bell XP (SP3) Desktop using the Packard Bell partition to revert back to factory settings. Everything worked ok and things were running fine until I suddenly got a BSOD, saying there was a corrupt or missing Windows Config file (Not sure if it's connected but I did a forced shutdown prior to this).
I checked all connections, RAM, Graphics etc and all seemed ok, I was unable to get into any recovery or safe mode options so I then used my Packard Bell Recovery DVD to reinstall everything. The recovery appeared to be going well and all the files loaded but when the system goes through the 'Windows Burnin' stage it goes to the BSOD 'Page Fault in non Paged area'
View 6 Replies
View Related
Aug 19, 2008
My son gets the message "invalid system disk, replace the disk, then press play" , when booting up, he started getting it after inputting a picture from a "smart card" using his built in card reader. There is NO disk in the reader. If you hit any key the computer continues to boot "normal" It isn't a big problem, but a sign of something not being right.
View 8 Replies
View Related
Mar 22, 2006
I recently formatted my drive and am trying to reinstall my WIndows XP Pro.When I put in the CD and the PC starts up I receive a message: "Invalid System Disk. Replace the disk and then press any key"I have already changed my BIOS so that it boots from the CD first. Not sure what the problem is? prior to that error message, it states that I should "press any key to boot from CD"...when I try to push a key nothing happens. I know my keyboard works since I used it to enter the BIOS.
View 5 Replies
View Related
Mar 14, 2005
A family member of mine has formatted the Hard Drive on their PC and when I they try to load windows XP it comes up with "Invalid System Disk, Replace Disk and Press Any Key"Do I need a boot disk and If I do What sort and where do I get it from.
View 7 Replies
View Related
Jun 21, 2006
I am getting this error message when I start windows XP Home, It says Replace the disk and press any key On doing so it starts normally.othing is in the CD drives and floppy is disabled in Bios.Booting is from the second hard disk - partition 2.
View 12 Replies
View Related
Aug 21, 2009
My XP desktop was in the middle of running CHKDSK when there was a power outage. Since then the computer will not start-up. It begins the usual POST, recognizing the drives then it comes to a screen saying Invalid System Disk, Replace the disk and then press any key.There are no disks in any of the CD/DVD drives. I have tried the recovery disk and even a full version XP disk, but nothing seems to be "seen". I get the same screen every time.
View 4 Replies
View Related
Jun 27, 2005
I just had Win 98 on my computer, but reformatted because I wished to start anew with Windows XP. The format went well, but I'm having trouble installing XP now. When I start up the computer with the setup disk in the disc drive, it tells me it's an invalid system disk.My problem is I just can't seem to get the setup to run... I dunno am I doing something wrong or is there something I'm not doing that I should be doing? I figured with the cd in the drive it would automatically start the setup
View 5 Replies
View Related
Mar 10, 2007
I have a Dell Dimension L866r with 512 mb. of ram . I have my bios set to boot from CDrom first, then my harddrive. When I boot my computer up with the XP Home disk in it all I get is Invalid System disk.
View 2 Replies
View Related
Aug 3, 2010
I have a problem with a Windows XP installation. The problem arose when I attached a SATA SSD with Windows 7 on it, intending to check whether the SSD had failed. The computer booted up into XP but I couldn't see the SSD in My Computer. When I restarted the computer, I received GRUB (the Linux bootloader) error 22. It is possible that Linux was active on the Windows XP HDD at some point, but it is long gone and I didn't expect to find GRUB controlling the boot. I switched off and removed the SSD drive so that the computer would, so I thought, be in the state in which it was when I approached it. I switched it on and got to GRUB error 21. I inserted my Windows XP CD-ROM and restarted, selecting the repair option. I ran CHKDSK, FIXBOOT and FIXMBR and restarted but now I get error INVALID SYSTEM DISK. INSERT SYSTEM DISK AND PRESS ENTER.
View 5 Replies
View Related
Oct 4, 2007
Until recently, my computer's single 120GB hard drive has been partitioned like so:
C: - ~5GB, active partition with boot.ini etc, used as a recovery partition D: - ~110GB, extended partition with Windows Last night I finally took the plunge and, using Paragon Partition Manager, got rid of the C: partition seeing as I never used its contents, and extended the D: patition to take up the free space created. I then made the D: partition PRIMARY and ACTIVE.To boot into XP, I then used a boot disk from here.windows started fine, and everything was dandy. I copied the BOOT.ini, NTLDR, NTDETECT.COM files across to D:, removed the boot disk and rebooted.'Invalid System Disk'. I'm still unable to boot without a boot CD.
View 1 Replies
View Related
Jan 9, 2009
I left my computer on for about 3 hours, when I returned the screen was black with the a message First time this happened INVALID System Disk Replace Disk and then press any key There is or was no 3 1/2 floppy disk in the computer. Every time I hit any key nothing would happen. When I would reboot I would get to the same screen with the same message and nothing would happen. Then I would reboot again and when that screen would come our I would insert a 3 1/2 Floppy into the computer and the computer would start up. So now the only time I can get the computer to start up I must insert a 3 1/2 floppy.
View 1 Replies
View Related
Aug 15, 2007
I recently purchased a refurbished Dell OptiPlexGX270. It came with no OS and I am trying to install XP Home. It's using BIOS version A06. I have changed the boot order to CD, HD, and Nic.I boot up the computer and then insert the XP Home installation disk. I get the following:Intel Boot Agent GE v.1.2.21 Copyright 1997-2004, Intel Corp CLIENT MAC ADDR 0D 56 8B 36 76 GUID 444 54 C4C 5900 7053 804D B5C04F483431 PXE-E53: No boot filename received, PXE-M0E: Exiting Intel Boot Agent Invalid System Disk, replace the disk, and then press any key.
View 4 Replies
View Related
Aug 9, 2005
A friend of mine gave me a few computers- because his office was upgrading all of their systems- I reformatted many of them and installed windows me (they are too slow to support xp), but I am having a problem with one. Originally it had windows 2000 pro as the os( I didn't have the password to log-into the computer) So I ran fdisk, formatted the hard drive, then tried to install the new os but I keep getting the error message upon booting that "invalid system disk, remove then press any key to continue".
I thought the cd-rom was bad so I replaced it, I changed the boot sequence, used a floppy to boot, even got the hard drive manufacturer's utility program to prep the drive for the os but even that doesn't work. Am I missing something? Does the fact that I didn't have the password to enter the computer have anything to do with this? I used this same method for installing me on all the other systems and they are fine, but this one is an issue.
View 8 Replies
View Related
Dec 29, 2006
An external hard drive. When it is on & I try to boot,I get the following error : Invalid system disk Replace the disk, and then press any key I then have to turn off the external & press any key to get it to boot. Is there a way that I can boot with that external turned on. Some setting I need to change perhaps? I have an E-Machines computer about 2 years old.
View 6 Replies
View Related
Dec 27, 2004
Purchased a Presario SR1220nx two months ago. It came with a 'System Recovery Disk".(SRD) Is this all I would need incase of a complete software problem to get back in operation again or should I be copying some additional OS files to a CD ? What are the disadvantages of the SRD and the advantages of having the WinXP software ? Seems to me that the SRD is all that I need in case of a failure?
View 2 Replies
View Related
Mar 22, 2005
I've just bought a used laptop running XP Home. It comes with a system recovery disk. Can I use that to do a clean install of the OS so as to remove every trace of the previous owner whose name keeps popping up in folders that can't be deleted or re-named.
View 1 Replies
View Related
Dec 23, 2006
I am running win xp pro. I can log onto windows with no problems but I want to run the recovery console in dos. But for some reason my administrator password is saying its invalid. Is there any way to change it in normal mode. Or is the admin password different in dos than in normal mode?
View 3 Replies
View Related
Feb 20, 2009
HP MEDIA CENTER COMPUTER WITH XP. I noted the D disk, labeled as HP RECOVERY DISK when I click MY COMPUTER is 96% full. Is there a way to delete some of these files,do I need this much space tied up?
View 14 Replies
View Related
May 5, 2009
Have VAIO VCG RC310G. Windows XP current SP. Tried to load audo disc to Itunes. System crashed. No picture on screen (black). Tried to use F8 safe mode start without success. Have system recovery dvd. Placed in drive. Turned off machine. Turned on. No screen, just black. Hear fan and drive spinning.Checked monitor and see the Analog/Digital message on the screen, (seems to be working.) This is the limit of my knowledge. Any ideas on how to get the recovery disk to be seen by the computer? Help Juscause (I despartely need it). ps, not worried about the data on the computer, but I would like to recovery if possible.
View 4 Replies
View Related
Nov 3, 2008
I was wondering how to create a reformat disk for a compaq presario SR2013WM. model # "RE468AA".Last year a tech came out to bring me another hard drive.He said that i need to make a "format disk" we had the option to use 26 "c.d.'s" or 2 "dvd-r" he made the system recovery disk in front of my eyes.does anyone know how to go thru the step's and make one ? if so please list all i need to know.
View 5 Replies
View Related
Dec 13, 2004
I think I got virus, even though norton work 2004 cant dectected but everytime startup its say that (invalid boot disk...please insert...) and I have to put in my winxp in cd drive to boot up. I been format the disk and reinstall win but it don't help. I think some how my NTLDR got corrupted? but not just that one drive, I change to another smaller (4.0G) drive that got nothing but Winxp Pro and it's say the same. Winxp Pro 3.0g mhz 340g Hd.
View 2 Replies
View Related
May 30, 2009
I have a real XP Home cd key thats really old, and I finally managed to find a real XP home (SP2) disk. i never got one with my old computer. now i just reformatted my harddrive and am trying to install it. however, the computer wont let me pass the part where i enter the key. it keeps on saying that the key is invalid
View 2 Replies
View Related
Aug 6, 2007
A friend of mine called me to his house to take a look at his gateway. All I know is that it runs Windows XP.He states that AVG antivirus prompted him to restart his computer once the virus definitions update completed. Once he restarted, a blank screen appeared and said, "Invalid Boot Disk, please insert in drive a:"Problem is, there is no disks in any drive.
View 8 Replies
View Related
Sep 17, 2008
I lost my system recovery disc. I also lost all of my games that came with windows...free cell, solitaire, paint..etc. I just want those back. Can I run a system recovery program on windows without a disc
View 1 Replies
View Related
May 2, 2007
Code '413' when i tried to log on here . started yesterdad evening .turned comp off and on that seemed to get rid of it .but came on the comp this morning and all was fine .then after a short time the messages started appearing again . trying to log in to hotmail i got the invalid header . in another hot i got in tryed to delete and got invalid header i think . tryed to send a message on a forum got invalid verb . last night on the comp shopper forum i could send if i put my message in the title box and 2 words in the message box but if i tried to put more words in the message box got invalid verb . tryed turning on and off today but no luck there . have an advent 9317 with duo 2 core . fire wall is zone alarm pro . antivirus is nod32 and webroot sweeprr as spyware . went on firefox and the same thing happened.
View 1 Replies
View Related
Aug 23, 2006
I need to do a System Recovery to restore my system back to its factory settings (I'm using WinXP Home). When I hit F10 upon startup in order to access the system recovery, nothing happens- it boots as it would regularly. I was able to boot up using the CD, and am now in the System Recovery console. Might anyone tell me what I need to do to perform a non-destructive, or even a destrucitve system recovery?
View 1 Replies
View Related
Mar 4, 2007
cannot get laptop to work it is saying no bootable cd in atapi cd rom invalid system disk replace the disk and press any key.i have no disk of this what so ever
View 9 Replies
View Related
Jul 11, 2010
I own an Hewlett Packard Compaq Presario SR1550NX if I push the start botten the fan runs the green light is on but also the yellow light below is on. The Monitor is blank and the tower makes also a peep peep noise.
View 2 Replies
View Related
