A family member of mine has formatted the Hard Drive on their PC and when I they try to load windows XP it comes up with "Invalid System Disk, Replace Disk and Press Any Key"Do I need a boot disk and If I do What sort and where do I get it from.
View 7 RepliesMy son gets the message "invalid system disk, replace the disk, then press play" , when booting up, he started getting it after inputting a picture from a "smart card" using his built in card reader. There is NO disk in the reader. If you hit any key the computer continues to boot "normal" It isn't a big problem, but a sign of something not being right.
View 8 Replies View RelatedI recently formatted my drive and am trying to reinstall my WIndows XP Pro.When I put in the CD and the PC starts up I receive a message: "Invalid System Disk. Replace the disk and then press any key"I have already changed my BIOS so that it boots from the CD first. Not sure what the problem is? prior to that error message, it states that I should "press any key to boot from CD"...when I try to push a key nothing happens. I know my keyboard works since I used it to enter the BIOS.
View 5 Replies View RelatedI am getting this error message when I start windows XP Home, It says Replace the disk and press any key On doing so it starts normally.othing is in the CD drives and floppy is disabled in Bios.Booting is from the second hard disk - partition 2.
View 12 Replies View RelatedMy XP desktop was in the middle of running CHKDSK when there was a power outage. Since then the computer will not start-up. It begins the usual POST, recognizing the drives then it comes to a screen saying Invalid System Disk, Replace the disk and then press any key.There are no disks in any of the CD/DVD drives. I have tried the recovery disk and even a full version XP disk, but nothing seems to be "seen". I get the same screen every time.
View 4 Replies View RelatedI have a Hewlet packard computer here, the mother board is a n1996, th eoperating system is ME. The computer justwill not boot at all., it gets to the ME Logo and th escreene just goes black. I can satrt it in safe mode, but i cannot restore it to an earlier date, no mater which date i choose, i just get the mnessage can not restore. I want to, reformat and install XP home, but the CD ROM does not show in my computer and it does not see the disk when i put it in. Also i tried to boot from a Woindows 98boot disk, and themn i get the message non system disk, replace and press any leter to continue.
View 1 Replies View RelatedI just had Win 98 on my computer, but reformatted because I wished to start anew with Windows XP. The format went well, but I'm having trouble installing XP now. When I start up the computer with the setup disk in the disc drive, it tells me it's an invalid system disk.My problem is I just can't seem to get the setup to run... I dunno am I doing something wrong or is there something I'm not doing that I should be doing? I figured with the cd in the drive it would automatically start the setup
View 5 Replies View RelatedI have a Dell Dimension L866r with 512 mb. of ram . I have my bios set to boot from CDrom first, then my harddrive. When I boot my computer up with the XP Home disk in it all I get is Invalid System disk.
View 2 Replies View RelatedI have a problem with a Windows XP installation. The problem arose when I attached a SATA SSD with Windows 7 on it, intending to check whether the SSD had failed. The computer booted up into XP but I couldn't see the SSD in My Computer. When I restarted the computer, I received GRUB (the Linux bootloader) error 22. It is possible that Linux was active on the Windows XP HDD at some point, but it is long gone and I didn't expect to find GRUB controlling the boot. I switched off and removed the SSD drive so that the computer would, so I thought, be in the state in which it was when I approached it. I switched it on and got to GRUB error 21. I inserted my Windows XP CD-ROM and restarted, selecting the repair option. I ran CHKDSK, FIXBOOT and FIXMBR and restarted but now I get error INVALID SYSTEM DISK. INSERT SYSTEM DISK AND PRESS ENTER.
View 5 Replies View RelatedUntil recently, my computer's single 120GB hard drive has been partitioned like so:
C: - ~5GB, active partition with boot.ini etc, used as a recovery partition D: - ~110GB, extended partition with Windows Last night I finally took the plunge and, using Paragon Partition Manager, got rid of the C: partition seeing as I never used its contents, and extended the D: patition to take up the free space created. I then made the D: partition PRIMARY and ACTIVE.To boot into XP, I then used a boot disk from here.windows started fine, and everything was dandy. I copied the BOOT.ini, NTLDR, NTDETECT.COM files across to D:, removed the boot disk and rebooted.'Invalid System Disk'. I'm still unable to boot without a boot CD.
I left my computer on for about 3 hours, when I returned the screen was black with the a message First time this happened INVALID System Disk Replace Disk and then press any key There is or was no 3 1/2 floppy disk in the computer. Every time I hit any key nothing would happen. When I would reboot I would get to the same screen with the same message and nothing would happen. Then I would reboot again and when that screen would come our I would insert a 3 1/2 Floppy into the computer and the computer would start up. So now the only time I can get the computer to start up I must insert a 3 1/2 floppy.
View 1 Replies View RelatedI recently purchased a refurbished Dell OptiPlexGX270. It came with no OS and I am trying to install XP Home. It's using BIOS version A06. I have changed the boot order to CD, HD, and Nic.I boot up the computer and then insert the XP Home installation disk. I get the following:Intel Boot Agent GE v.1.2.21 Copyright 1997-2004, Intel Corp CLIENT MAC ADDR 0D 56 8B 36 76 GUID 444 54 C4C 5900 7053 804D B5C04F483431 PXE-E53: No boot filename received, PXE-M0E: Exiting Intel Boot Agent Invalid System Disk, replace the disk, and then press any key.
View 4 Replies View RelatedIm trying to help my dad get his computer working again. We bought the MCD's for the packard bell computer he owns and first we were struck with a glue part error 5. However we seemed to fix this through a format and re creating the hidden sector. We then ran the CD's and it went seemingly fine through the installation process, then finally we took out MCD 1 as we were told, the PC restarted and we were faced with another issue:'Invalid system Disk. Replace the disk.'Were now stuck on this. I have tried reinstalling again, also I've tried to create another bootdisk just incase but due to me having Vista I couldn't help him much there as it didn't install. I had already formatted and reinstalled the hidden partition and now im stuck as im only 16 and not very farmiliar with the boot process. So I would appreciate any help if you would be able to.
View 14 Replies View RelatedA friend of mine gave me a few computers- because his office was upgrading all of their systems- I reformatted many of them and installed windows me (they are too slow to support xp), but I am having a problem with one. Originally it had windows 2000 pro as the os( I didn't have the password to log-into the computer) So I ran fdisk, formatted the hard drive, then tried to install the new os but I keep getting the error message upon booting that "invalid system disk, remove then press any key to continue".
I thought the cd-rom was bad so I replaced it, I changed the boot sequence, used a floppy to boot, even got the hard drive manufacturer's utility program to prep the drive for the os but even that doesn't work. Am I missing something? Does the fact that I didn't have the password to enter the computer have anything to do with this? I used this same method for installing me on all the other systems and they are fine, but this one is an issue.
An external hard drive. When it is on & I try to boot,I get the following error : Invalid system disk Replace the disk, and then press any key I then have to turn off the external & press any key to get it to boot. Is there a way that I can boot with that external turned on. Some setting I need to change perhaps? I have an E-Machines computer about 2 years old.
View 6 Replies View RelatedThe C drive is used strictly for WinXP OS and applications, of which there are many and they are all very large. While I'm fully expecting this to be a tedious task, I would welcome any advice on how the process can be made less tedious and very safe. Note that the C drive is an 18 GB SCSI-3 supported by an Adaptec U-160 SCSI adapter, which has performed reliably and is very speedy.
View 14 Replies View RelatedI think I got virus, even though norton work 2004 cant dectected but everytime startup its say that (invalid boot disk...please insert...) and I have to put in my winxp in cd drive to boot up. I been format the disk and reinstall win but it don't help. I think some how my NTLDR got corrupted? but not just that one drive, I change to another smaller (4.0G) drive that got nothing but Winxp Pro and it's say the same. Winxp Pro 3.0g mhz 340g Hd.
View 2 Replies View RelatedI have a real XP Home cd key thats really old, and I finally managed to find a real XP home (SP2) disk. i never got one with my old computer. now i just reformatted my harddrive and am trying to install it. however, the computer wont let me pass the part where i enter the key. it keeps on saying that the key is invalid
View 2 Replies View RelatedA friend of mine called me to his house to take a look at his gateway. All I know is that it runs Windows XP.He states that AVG antivirus prompted him to restart his computer once the virus definitions update completed. Once he restarted, a blank screen appeared and said, "Invalid Boot Disk, please insert in drive a:"Problem is, there is no disks in any drive.
View 8 Replies View RelatedFor a whole month now I have carefully set up the new notebook described below after successfully, but laboriously, running a 1997 Dell PII300-SCSI 128-SDRAM Win98SE system for 8 years. I've now reached a point where I need help on several issues from some of you who are far ahead of me when it comes to running a modern system. There are no major problems so far, just some minor performance issues and a few questions in areas in which I know little or nothing.
One instance of a freeze (when running Norton Speed Disk) which turned out to be a bad cluster and was repaired by ChkDsk. One instance of stalling @ the "windows is shutting down" window (shutdown only). There have been two instances of noticeable decline in peak performance: A.) after installing Norton System Works. I immediately uninstalled Go Back, which really helped, and B.) after replacing one of the installed 256mb sticks of RAM with a 1GB stick from Crucial. I only mention this because I deliberately delayed installation until maximium system performance had been consistently sustained. [This is nothing major, just a slight delay and/or menus briefly going blank when starting some programs and a slight delay in application reaction time, which usually manifests itself at the start of sessions, and late sluggishness in long sessions] I only mention this in the event that I'm wrong and can be corrected, because I believe this must be a coincidence and not due to the hardware (unless there is a setting or something in Windows that needs changing to accommodate the additional RAM) - and the solution to regaining peak performance lies in Windows and/or Norton System Works....
Getting error message when trying to change out a 10 gig to a 250.NVIDIA Boot Agent 201.0462 PXE-E61: Media Test Failure, check cable PXE-M0F: Exiting NVIDIA Boot Agent DISK BOOT FAILUR, INSERT SYSTEM DISK AND PRESS ENTER" this drive I am upgrading also has Windows XP OS. I have another drive on the computer that has 160g.
View 13 Replies View RelatedMy computer was working perfectly well. I left it on and went out. When I came back it had a black screen saying "boot disk error, insert system disk and press enter" in BIOS. This has happened before but I just hit my pc then rebooted then no problem. This time it didnt work, I have tried to vacuum the interior of my pc but to no avail.
View 9 Replies View RelatedWhat can I possibly do to solve this problem? I have Windows XP and everywhere.
View 1 Replies View RelatedI've tried it in safe mode too, and I get the same message for defragmenter "disk defragmenter could not start", for scan disk "..could not complete scan ", and system restore just does not respond when I select the restore point, I can only close it.
View 11 Replies View RelatedDisk boot insert system disk and press enter comes what do i do?
View 2 Replies View Relatedi m facing problem and i m getrting message as system disk error what i should do now
View 1 Replies View RelatedI recently re-installed an old copy (4 years) of winxp home 32 bit (after my sp2 disks were giving me trouble.) There are 3 320gb hd's and 2 36gb raptors. I actually chose to install winxp home on one of the 320's but a couple of odd (to me) things happened. First, it formatted the 320's into two partitions, 1 equal to the other. I did not notice this at the time (I was in a hurry.) My winxp pro sp2 disks never did this. Second, it installed winxp on c: as I wanted but then it has "(System)" on e: (another 320gb split in two.) I found this in the disk management section.Frankly it runs great, but there are no files to be seen on the e: drive. I back up my c: drive regularly and I am wanting to know if something will be amiss with the backup because that (System) disk is on e?I've just never seen this "(System)" disk thing before.
View 2 Replies View RelatedI recently had to move up to WinXP Home on a Compaq Presario after saying goodbye to my trusty Packard Bell running Win95a.My WinXP Home came preinstalled on the computer and I had no WinXP Home CD Disk as a backup. I contacted Compaq and they immediately sent me a set of Backup Disks in case the 'System Restore' on the computer wasn't available for one reason or the other.I have yet to put them into the computer to see what they consist of. I am not experiencing any problems and I don't want to create any by doing something I am not sure of.I am just curious is this set of disks is what I would use if I had to reinstall WinXP Home?
View 10 Replies View RelatedMy dad sent my daughter a "E Machine" with XP Home. Before he sent it, he transferred all of his personal files. When I hooked it up, the screen said "Boot disk failure. Insert system disk and hit enter". The company sent us a new set of bootable CDs as we thought the problem might be in the CD.
View 14 Replies View RelatedI am trying to update my EVGA 7800GT's BIOS as well as my motherboard's. I have done this a few months ago, same disks and everything.When I create a floppy with the required files and restart, I get the following message:"Non-system disk or disk error. Replace and strike any key when ready."
View 2 Replies View RelatedIf I want to attach second hard disk with the same configuration of master hard disk, then system doesn't show second hard disk altogether or new hard disk begin to malfunction. Such as suddenly begin to give sounds like TICK, TICK TICK. Suddenly vanishes from the 'MY COMPUTER' drives. Suddenly denies to copy paste functions. BIOS shows both SATA drives. But Win XP doesn't load or simply hangs while starting up [booting up]. It happens when I attach second SATA drive with system. If only one SATA is attached, then WIN XP boots normally.
View 3 Replies View Related