Pro - Computer Doesnt Recognize Cd R Drive As Bootable Device
Dec 15, 2006
I tried to run a knoppix (live linux distro) cd and changed the boot order (F2 setup) to boot from cd. Ok... the cd still wouldnt boot, so I went into F2 again and made all devices non-bootable except the cd player. When I tried this method... I was informed that my cd drive isnt a bootable device. I checked a few settings but couldnt find anything in regards to this. Im just trying to boot from my cd player.
View 12 Replies
ADVERTISEMENT
Aug 10, 2010
Two weeks ago I installed win7 on my system,but 3 days ago,bacause of some problems,I decided to uninstall it and to setup an older version.But unfortunately I had many problems to setup another one.Although I had the related DVD in DVD drive,after some seonds it asked for the DVD labeled Win XP.Anyhow finally I could setup win XP 2002,but windows only recognizes drive C with capacity of 100GB and I don't have my other drives as before.For your information it's NTFS.I decided to setup Win7
View 1 Replies
View Related
Feb 12, 2006
I've been using an USB enclosure successfully for some time with no problem. I upgraded to a Maxtor 100 gig in the same enclosure. When turned on it does the "plug and play" chimes and it shows up in the device manager as installed and working properly. But it is not shown in My Computer as a drive letter.
Dell dual core, 1 gig RAM, Windows XP service pack 2
View 4 Replies
View Related
Aug 23, 2008
I was having a lot of troubles with XP PRO after a CPU failure, when I tried to do an XP installation Repair. It failed miserably and after a month of posting and searching for answers, I threw in the towel. I reformatted the HD and did a clean install. On the advice of a MS Tech, I downloaded SP3 and installed it first thing. After I got everything up and running with all the updates, I discovered that XP no longer recognizes my USB ports as USB2. I found some original drivers on the Motherboard installation disk, but it will not allow me to install them because my XP SP2 install disk is already supposed to have them. I tried removing all the USB drivers and forcing XP to figure it out, but no luck. It is an ASUS P5GD2 Deluxe with a P4 processer and an XP PRO SP3 Operating System.
View 3 Replies
View Related
Apr 20, 2006
I had a problem with my windows. When ever I plug in my Flash drive (i got a few: kingston data traveller 1gig, pendrive 128mb,etc) onto my usb port. Window will be able to detect the drive had been plug in. I can see the "Safely Remove Hardware" icon on the right side of my task bar. But i cannot see the drive appearing in "My Computer". If I double click on the "Safely Remove Hardware" icon and try to view the external drive information, I can see that its already detected and being assign with drive E: . Even if I open a windows explorer and type in E: , it will throw me an error "Cannot find 'file:///E:/'. Make sure the path or Internet address is correct". But if I were to restart my computer, then i can see it for the first time. If I disconnect it (thru the "Safely Remove Hardware") and plug it back in (or plug another flash drive), I cant see the external drive. Causing I had to restart my computer multiple time a day.
View 3 Replies
View Related
Dec 4, 2007
I bought a WD Passport 160gb. and it worked fine I left it running on my computer for 2 weeks and now its not working error (USB Device does not recognize device) so I thought I broke it, I went out and bought another one and I am getting the same error with the new one and old one, on mulit computers that it worked on in the past, I even tried in on new computers.
View 37 Replies
View Related
Jul 15, 2010
Im new, so bear with me please. The problem is on my old Sony Viao Model PCG-6H4L XP. I wanted to start fresh and the recovery system for windows gives me only a limited number of dates. I thought that the Viao recovery would do the job.I was wrong. I haven't checked recent forums about problems with this, so I went ahead and broke my laptop. Before the Recovery system starts, my laptop says, with a black background.
View 8 Replies
View Related
Aug 9, 2007
My brother went to My Computer one day and saw that there was no disc drive there, it was working in the past, but now it doesn't show up, I don't think he did anything unusual. But it shows up under Safely Remove Hardware Wizard with "Samsung CD Drive" or something like that.
View 14 Replies
View Related
Dec 28, 2007
Everest shows 3 unknown devices but device manager doesnt?my soundcard dissapeard today, i can still pick it up using "Unknown Devices" and EVEREST although when i try to run audigy 2 drivers, it`s telling me there are no supported devices in the system, anyone know how i can force the REAL device manager to see these devices?it seems only everest and unknown devices is picking up my soundcard, it also says AUDIGY from CREATIVE. it just is not appearing in device manager for some reason so i am unable to actually install it.
View 8 Replies
View Related
Aug 19, 2009
I am running XP Pro on my computer. On another drive I have windows 7. My computer stopped booting to my XP drive all of a sudden, but it would let me boot to my Windows 7 drive. That lasted for about 3 days. Now I can't boot to either drive. When I start the computer it says there is no HDD. I tried to use the XP disk to repair, that didn't work., so I thought I'd do an XP install. But my hard drive doesn't show up all the time. Or it will show the HDD but upon trying to pick a partition to set up XP in, it then tell me there is no HDD. I get the blue screen of death, and have to manually force a shut down. Other times it tell me that the HDD is RAW, and it needs to be formatted. How can I get the HDD to format? Is there a way to do it through DOS. Sometimes I can't even get to the DOS prompt. The bootup section is corrupt. I need to repair it, but can't if the system doesn't see my HDD.
View 8 Replies
View Related
May 25, 2008
My sister had a nasty infection, including vundo and many others, some of which I could remove, many of which I couldn't using Spybot, Ad-aware, Trend Micro, Vundofix, etc. Because she only has pictures on her computer anyways, I've decided to reformat, and moved all her files to my computer. I've changed the Bios screen to boot from the cd, and popped it in, and I keep getting the message: No Bootable Device -- strike f1 to reboot, f2 for setup utility. I'm stuck and haven't been able to find any similar situation on the internet. The rescue disks are a set of 3 disks that came with my computer from Future Shop, burned with "dv6113" written on them.
View 5 Replies
View Related
Jul 10, 2005
I have an external USB 300GB Seagate drive that used to work fine.Then, periodically XP would not recognize when I turned it on. A re-boot would fix the problem. Now, XP won’t recongnize the drive at all. I get an "unknown device" error. I have a USB 2.0 card I plug the drive into, and all other devices in that card work fine. The device driver manager says all is well, except of course with the "unknown device" it notes, which is the external drive.
View 8 Replies
View Related
Nov 1, 2007
my external hard drive all of a sudden stopped showing up in "my computer"
and a can't find it anywhere else. it make the hardware sound when I plug it in but nothing shows up. when I plug it in another port it comes up with a message saying "USb device not recognized. one of the usb device attached to this computer has malfunction and windows cannot recognize it
View 7 Replies
View Related
May 15, 2007
I have given my 40GB ATA HDD to my friend to fetch some movies he has got in his 160GB SATA HDD. He configured my HDD as secondary master and copied all the movies to mine. Later he removed my HDD and rebooted the system to find that his HDD isn't booting up. He says that his HDD isn't being detected in the BIOS. The well known error message "No bootable device found. Insert system disk and press Enter" appears every time he tries to boot his system. What can the solution other than formatting?( Formatting isn't favourable as there is critical data in the HDD).
View 4 Replies
View Related
Dec 27, 2005
Have an HP pavilion laptop running Windows XP sp2. My computer crashed a few months ago and I had to reinstall OS per HP tech support (I used the disk that came with the computer). Since then, I have been having some problems. First, tough pad is erratic; cursor jumps around while typing. I am trying to install a new Deskjet printer. I have gone through all the required steps; i.e., load software first, then plug cable in the usb port.
While installing software for printer, I get to the point where it prompts me to connect my usb cable. When I do, I get a message that Windows has malfunctioned and it does not recognize my device. I know I have USB 2.0. My cable is brand new and works fine with the printer on an old computer. I cannot get it to work on my laptop. I am able to connect a scanner and it automatically detects it through usb and also my camcorder is also automatically recognized. Could something be missing since I had to reinstall my OS? I have tried calling HP to get help. I have tried going into bios at startup and I do not see anything in there about USB; I have upgraded BIOS through HP website.
View 14 Replies
View Related
May 19, 2007
Not sure what has happened here. Toshiba Laptop M70 WinXP home SP2.Initial issue Unabel to read files off the DVD/CD Matshita DVD-Ram UJ-8415 When checking "System" Hardware there is a yellow caution ! beside it indicating an issue.Action: Uninstalled device and rebooted to let windows find appropriate driver.
System said found new device and identified it by name. But still the trouble indicator.Tried a couple of things to no avail.I have the toshiba - product recovery disk but I cannot access it due to the DVD error. so I attached my external DVD (usb) device Thinking I could load the disk in it and recover the drivers or what ever. My Freecom DVD now has a Trouble indicator on it as well. so it appears that the devices won't recognize.(tried to instal again - system recognizes it initially then show the trouble indicator again.
View 14 Replies
View Related
Aug 23, 2007
My PC is running absolutely stable (7 hours of orthos). Just bought this EVGA motherboard and swapped it in place of an Asrock motherboard and got everything running, overclocked and stable.Before I got Windows XP running (previous installation from the asrock mobo), I encountered an issue and i isolated it down to one of the 200gb 7200.7 SATA HD's.IF this HD is plugged in when the PC boots, then the Windows XP Boot screen appears and hangs. NOTE: it DOES NOT freeze - the bar still moves, but there is no HD activity and the pc stays like this for hours on end. Note again - this is not a hang. the activity bar still moves from left to right, and it keeps doing this indefinitely it seems (with no HD activity from any drives). IF this HD is not plugged in, the PC boots in straight away. All drivers are tip top (nforce drivers, SATA drivers). However if I hot-plug this drive from within Windows, it works fine!. The PC just doesn't boot with the HD plugged in.
View 1 Replies
View Related
Nov 18, 2009
how to create bootable pen drive for Xp in windows 7. I am using Windows7 and want to create a bootable pen drive for XP in Windows7
View 2 Replies
View Related
Feb 10, 2006
this might seem a lame question here but can someone please tell me how to make a Bootable CD so i can boot my computer from this bootable CD and reformat my C drive without using my windows cd.
View 10 Replies
View Related
Nov 22, 2008
Insert any USB device to this computer, Computer keeps restarting and it wont stop doing that until I remove the usb device. I tried with all the usb ports on this computer and problem is the same. Even by hooking up a usb keyboard or mouse, computer wont get to the login screen. it keeps on restarting. It wont even go into 'safe mode'.Anyone have any clue whats going on and the solution to fix it?
View 2 Replies
View Related
Jul 5, 2010
make a USB DRIVE bootable for ghost image
View 1 Replies
View Related
Jan 14, 2007
EASY way to copy my hard drive to a bootable CD? I think the HDD I have now is dying, and I would like to have a hard drive I can just pop in which has all the information I have now. I have heard horror stories about Norton Ghost, so I'm hesitant there. I also bought a product called Drivecopy...BEFORE I learned that it is not compatible with XP Pro. Ghost and Drivecopy are both PowerQuest products. I have been told that if you simply copy one drive to another it will not be bootable because of some hidden/missing files that Windows uses. I have also heard that most products which are SUPPOSED to do what I want will only work on drives the exact same size and will duplicate my smaller partition if I go to a larger drive. There MUST be an easy way, but I'm stumped.
View 14 Replies
View Related
Jun 15, 2010
I just made a backup of my HD with Paragon to an external drive. That went as advertised. FIne and dandy.I now say to myself "SELF"? what will I do if my PC becomes completely hosed and will not even boot.I know. I will have a nice doorstop.Now my question is can I make a bootable flash drive to restore my backup I see the option is there but I have seen more than once researching with Google that this will not work. Seems to me doing this with CDs would require a dozen in my case. My computer does not support DVD.
View 7 Replies
View Related
Jan 8, 2009
I have this sony vaio laptop, and the good people at sony decided not to give this drive the ability to boot from a usb device (external dvd or floppy)Unfortunately the DVD drive that was built in BROKE, and I need to install windows on this laptop using a brand new hard drive.I can't boot from the windows dvd, I can't boot from a floppy, the drive is totally empty so I can't put anything on it.I CAN however, connect it to another computer and format it, I thought I could make it into a MSDOS bootable drive (like when you format a floppy) but windows does not allow it on a drive this size.
View 13 Replies
View Related
Sep 29, 2007
My Inspiron 6000 recently crashed and the dell tech support told me it was the hard drive. I ordered the new one and after putting it in, I still get the same message I got with the old one: "Internal HDD HARD error! No bootable devices--Strike F1 to try reboot, F2 to enter set-up utility"
View 7 Replies
View Related
Mar 31, 2006
Iave just reinstalled windows and nowI cant access my CD drive.
View 7 Replies
View Related
Nov 14, 2009
How do I reinstall Windows XP on my laptop (Compaq V5000 - which is several years old)? The laptop's cd-rom is dead. There is no floppy disk drive. The hard drive has crashed. I have read on some websites that I can make a bootable usb drive. However, I have not been succesful in making a bootable USB thumb drive when the laptop's BIOS doesnt support a USB device to be bootable.The only thing I do have is my desktop computer (which is working fine) and a USB external case for the laptop internal hard drive.
View 8 Replies
View Related
Jan 19, 2007
I have 5 or 6 different bootable floppy drives, partition magic, norton ghost, etc. I want to make them all bootable off a single CD, thumbdrive, etc. with a simple multimenu in dos. I've created the bootable thumb drive, and I've messed with the [menu] commands and such, but I can't get it to work. Is there a way to make a simple boot option to say, use this config.sys and this autoexec.bat?
View 2 Replies
View Related
Sep 12, 2005
I'm trying to copy some files from my PC, but it doesn't recognize that I've got a dvd burner, it sees it only as a cd burner, it will play dvds, but wont let me erase or burn.My pc has started getting some bugs recently, and I need to hurry to backup my files, before it takes the big crash.
View 6 Replies
View Related
Jul 9, 2005
My computer has several problems. The most serious is not being able to get Windows XP to load.I have tried booting in safe mode (F8) but I keep getting an error screen. I installed a game on the computer today that apparent has caused this problem. Any advice on how I can boot to safe mode to remove the program and do a system restore would be appreciated.
View 8 Replies
View Related
Jan 23, 2009
Computer wont start up proper anymore.. it goes past the welcome screen and goes to my desktop but only shows the screensaver and doesnt fully load up its strange, its just blank and ive tried restarting many times but still the same result and also waited for a while to see if it was a duration problem but still no result.i took a photo with my phone to show u how far it goes.
View 7 Replies
View Related
