I bought a WD Passport 160gb. and it worked fine I left it running on my computer for 2 weeks and now its not working error (USB Device does not recognize device) so I thought I broke it, I went out and bought another one and I am getting the same error with the new one and old one, on mulit computers that it worked on in the past, I even tried in on new computers.
View 37 RepliesHave an HP pavilion laptop running Windows XP sp2. My computer crashed a few months ago and I had to reinstall OS per HP tech support (I used the disk that came with the computer). Since then, I have been having some problems. First, tough pad is erratic; cursor jumps around while typing. I am trying to install a new Deskjet printer. I have gone through all the required steps; i.e., load software first, then plug cable in the usb port.
While installing software for printer, I get to the point where it prompts me to connect my usb cable. When I do, I get a message that Windows has malfunctioned and it does not recognize my device. I know I have USB 2.0. My cable is brand new and works fine with the printer on an old computer. I cannot get it to work on my laptop. I am able to connect a scanner and it automatically detects it through usb and also my camcorder is also automatically recognized. Could something be missing since I had to reinstall my OS? I have tried calling HP to get help. I have tried going into bios at startup and I do not see anything in there about USB; I have upgraded BIOS through HP website.
Not sure what has happened here. Toshiba Laptop M70 WinXP home SP2.Initial issue Unabel to read files off the DVD/CD Matshita DVD-Ram UJ-8415 When checking "System" Hardware there is a yellow caution ! beside it indicating an issue.Action: Uninstalled device and rebooted to let windows find appropriate driver.
System said found new device and identified it by name. But still the trouble indicator.Tried a couple of things to no avail.I have the toshiba - product recovery disk but I cannot access it due to the DVD error. so I attached my external DVD (usb) device Thinking I could load the disk in it and recover the drivers or what ever. My Freecom DVD now has a Trouble indicator on it as well. so it appears that the devices won't recognize.(tried to instal again - system recognizes it initially then show the trouble indicator again.
I've been using an USB enclosure successfully for some time with no problem. I upgraded to a Maxtor 100 gig in the same enclosure. When turned on it does the "plug and play" chimes and it shows up in the device manager as installed and working properly. But it is not shown in My Computer as a drive letter.
Dell dual core, 1 gig RAM, Windows XP service pack 2
I tried to run a knoppix (live linux distro) cd and changed the boot order (F2 setup) to boot from cd. Ok... the cd still wouldnt boot, so I went into F2 again and made all devices non-bootable except the cd player. When I tried this method... I was informed that my cd drive isnt a bootable device. I checked a few settings but couldnt find anything in regards to this. Im just trying to boot from my cd player.
View 12 Replies View RelatedInsert any USB device to this computer, Computer keeps restarting and it wont stop doing that until I remove the usb device. I tried with all the usb ports on this computer and problem is the same. Even by hooking up a usb keyboard or mouse, computer wont get to the login screen. it keeps on restarting. It wont even go into 'safe mode'.Anyone have any clue whats going on and the solution to fix it?
View 2 Replies View RelatedI have an AMD 2.1 athlon, i try and re-install my C-MEDIA AC97 Audio Device, i dont have the CD and i dont know how to fix this
View 1 Replies View RelatedI have installed a targus 7 port powered USB HUB on my computer. Device manager reports unknown device. I have deleted and it restalled the drived after the system rebooted. Device manager still saying unknown device. Their is not driver needed according to the manufacture. When the PC is booting it does see the IPOD mini and the Flash drive. But once the PC is fully out and login and I look a the device manager is still reporting unlnown device error (code 10).
View 1 Replies View RelatedI had some trouble last night and today with getting rid of a virus. Now that it is gone, I am having sound problems (maybe related, maybe not). This morning, when I opened iTunes I got a message that there was no audio device detected. After trying several things, I rebooted. Magically, I could play music again. However, a short while later, I again got an error message telling me that there is no audio device found, even though it shows up in Device Manager as working properly. The problem goes away for a short time after I reboot, but returns. It is Realtek AC 97. Why won't my computer keep recognizing it? (It tried going to Realtek's site to download an update. It has updates for Windows 98, 95, etc., but not for XP. Or at least I couldn't find it.)
View 6 Replies View RelatedRunning Windows XP on Emachines ET1161-07. Installed all drivers that I could find, since EMachines does not represent XP. Tried Realtek audio and HD audio, tried Intel, didn't work. Tried NVidia, as it has an NVidia motherboard. Spent too much time on this computer. Can anyone lend a hand? I know it's got something to do with Audio, as there's no audio device detected in Sounds, under Control Panel.Customer has to have computer today.
View 10 Replies View RelatedI gotta a XP Home SP2 Machine was running fine then on boot up sound device not found. went to device mng and no items displayed. System restore had been didabled and Norton disabled as well. Done a spyware scan pull nout so did virus
View 3 Replies View RelatedI've been using a Buslink 40G disk-to-go for about 2 years and love it. Today I plugged it into the USB port and the drive did not display. I've searched forums half the night since this drive contains financial data that hasn't been backed up for a month (yes, bad practice, I know) and I need to get it working. I've uninstalled, reinstalled, updated drivers, removed and reinstalled drivers, rolled back drivers and tried everything short of bios changes I've seen recommended.
View 1 Replies View RelatedI had this problem last time when I fresh installed Windows XP Pro on my computer. I don't know the time, but it happens at least 30 days after I reinstall the OS and software. Today, my computer prompted me to install drivers for a PCI Input Device, but I haven't installed any new hardware for months. Basically, I haven't touched the inside of my computer for that long. So why is Device Manager prompting me to install this mystery device? Hardware ID shows that it is from vendor 1102, which is Creative, and I have an Audigy 1. Also, my FireWire port is Code 10, the device cannot start. So I'm thinking the mystery device is the same firewire port. But why show up as a separate device? I tried removing the devices and restarting the computer, but they return to haunt me again. The device properties for the PCI Input Device says PCI SLOT 7, AND I DONT HAVE A 7th slot! Can someone help me, please? Device manager shows my 1394 Net Adapter with a yellow exclamation, and it has code 10, device cannot start. There is an unknown device, the PCI Input Device, which doesn't allow me to install any drivers for it, yet it has the creative Vendor ID 1102. It shows itself as being PCI Slot 7.
View 3 Replies View RelatedI have a feeling that this is simply a case of some registry settings which need adding/modifying/deleting but exactly which ones and what values I do not know. No, I haven't tried re-installing XP.
View 3 Replies View RelatedThe system seems to be very stable at this point in time. I run Norton Utilities and other maintenance sw as well as have a firewall/pest remover/anti-virus. Behavior - most things work fine on the USB ports, either the hub or direct connects. One digital camera will only work when direct connected(not thru the hub). I have a scanner that will only work on a 2003 Compaq Presario, but not on the whitebox on any port. Also, I have had two devices that won't work at all. I have noticed that the USB mass storage device icon doesn't seem to be present now when I attach a flash drive. This is recent behavior and doesn't predate every USB problem.
View 4 Replies View RelatedLast night I installed ATiTool 0.24 over my 0.25 version (stupidly). I also did a BIOS update and installed Cat6.3 and then AVIVO converter. When I rebooted, I had this new PCI device requiring a driver,but it's an unknown device and doing an auto update helped me.I can't get rid of this pesky PCI device (tried uninstalling but Windows detects it again after restart/boot-up). All my stuff is working, so I don't know where this critter came from?
View 1 Replies View RelatedI have a huge problem with two unknown devices in my "Device Manager" after formating and reinstalling fresh copy of Win Xp Pro.In my "Device Manager" there is two lines with Unknown devices.
View 10 Replies View RelatedI'm using XP SP3 Home Gateway desktop My device Manager has nothing in it. I don't know when it quit showing. I have checked Bios plug&Play, and it is set in Auto. I am also getting an error stating my recovery D: is running out of disk space.
View 2 Replies View RelatedMy computer cannot detect any cd's in my DVD or CD drive. When I open Device Manager the CD/DVD devices have an error. This error: Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41) Click Troubleshoot to start the troubleshooter for this device.When I run the DriverScan it simply doesn't even have an entry for the drives, probably since it thinks it doesn't even exist at the moment.
View 5 Replies View RelatedAnyone know how I can rename a device in device manager, (or the registry), so it doesn't show #2 after the device.I used the leadtek driver uninstall tool last night. And it removed the drivers I had for this Leadtek Deluxe tuner alright.BUT it also renamed my onboard Gigabit LAN (onboard) to #2 my scanner to #2,
and removed my Nvidia drivers for the video card.And reverted the videocard drivers to MS Nvidia drivers.I managed to fix the scanner entry by uninstalling the drivers, then rebooting and reinstalling the drivers.And I managed to fix the videocard drivers, by reinstalling the Nvidia drivers.So, yup, anyone have any idea how I can change the board LAN, so it doesnt have #2 after it? sing XP Pro SP2
the other day I tried to insert my friends usb into one of the frontal usb ports, it said it couldn't recognize the device or that it had malfunctioned. From that point on, Anything connected to the pc via the usb won't be recognized. everything else on the pc works fine, so theirs either some really easy way of fixing this or i need to buy a new motherboard/serial bus.
View 1 Replies View RelatedThis has happened several times and I don't know how to correct it, if anyone has a suggestion please let me know. When I uninstall. unplug and remove drivers, for a USB device (web cam) and then reinstall it later Windows says it #2 or #3 or #4 but there is no other device. Why does it name it that way and how can I make it install as just that device.This has also happened when I installed a replacement NIC card.I hope someone understands what I am trying to explain.
View 1 Replies View RelatedI haven't installed anything new on my computer but today after having my computer shipped to me via UPS I cut on my computer and where the XP load bar screen was I got: "reboot and select proper boot device or insert boot media in selected boot device".Seeing this I knew I went into the BIOS setup and tried to turn the system priority to look at the HDD. Instead I only had the option of the DVD drive and the CD drive.I have no idea how to solve this problem and don't have any of the recovery CD's. I DO NOT WANT TO REFORMAT because like a bad little boy I did not backup my 4 years worth of work.
View 9 Replies View Relatedmy Mom's computer is a HP Pavilion, she's using Windows XP (the original version and she hasn't updated from Microsoft since. when exactly did dinosaurs roam the earth? ) About two weeks ago, every time that she reboots it locks up the computer and you can hear the motor running constantly. When you go to shut it down a window comes up and asks for you to wait or end task, and the error is "Device10 Notification". The ONLY thing that she has put in recently is the HP 4 in 1 Copy/Scan/Print, but that was, at least, two weeks before the problem started. There is YET another error message that appears every once in a while, it's for HP Imaging Device, and you have to end task to get it to shut down, but this isn't a constant problem like the device10 is.
View 1 Replies View RelatedThere is six places where I can insert a usb on the computer, I have tried them all. I can insert my mp3 and it will start to charge, but a lot slower than before and I cant add more music because it wont pop up at "My computer". I can insert my mouse and its red light will start but the mouse is still not working. No usb device at all will show up at "My computer". Sorry for not explaining better, but I hope somebody have a clue about what I'm talking about.
View 10 Replies View RelatedI have a linksys wireless network router installed on my computer (Windows XP SP2, 512mb RAM). It was working fine until about a week ago when it started getting sporadic and i had to re plug it in almost every day to "re work" it. Then it stopped working altogether. It lights up when the comp is booted but then it turns back off. If plugged in during computer being on, it just says "USB Device Not Recognized", no matter how many times i uninstall & reinstall the software. The only thing that "works" is when I uninstall my Intel USB Controller hardware--the Internet router comes back to life for a moment and shows up in the system tray only to flick back gone. It's soo frustrating.
View 3 Replies View RelatedMy device manager is gone! This is a friends computer(all computer specs given are for the computer I am speaking of in this post), so I am not aware of any changes they may have made and I also don't know how long it has been gone. When I go into my control panel / system / hardware / device manager It brings up an internet explorer screen that says the following:I also tried running a Windows search for "Device Manager" and it came back blank. Does anyone have any ideas how a device manager can disappear? I found other posts about Device Managers being empty but no problems quite like mine.
View 6 Replies View RelatedIt opens but there is nothing is in the box. Is there a SFC program for XP that might restore it, or other options?
View 6 Replies View RelatedHaving trouble with PC game, game stops and says D3D device D3DERR NOT AVAILABLE.
View 6 Replies View Relatedhey guyz i installed a windows xp home to windowz xp pro and my sound dont work when i go to the volume controll it sayz no mixer device are installed.
View 6 Replies View RelatedI'm not sure if there are previous threads on this, but I accidentally deleted my sound by deleting the program realtek audio.All I remember is the name realtek, and I am not sure what to install.I've already installed realtek ac '97 audio 3.99 and it shows up in the device manager, but the sound still says 'no audio device.I have a Windows XP SP2.Please let me know what I can do.Oh, and i've tried to uninstall it from the device manager, but it won't let me. My computer just freezes.
View 14 Replies View Related