Laptop Hard Drive Crashed, No Floppy, No CD-Rom And Bios Doesnt Support USB
Nov 14, 2009
How do I reinstall Windows XP on my laptop (Compaq V5000 - which is several years old)? The laptop's cd-rom is dead. There is no floppy disk drive. The hard drive has crashed. I have read on some websites that I can make a bootable usb drive. However, I have not been succesful in making a bootable USB thumb drive when the laptop's BIOS doesnt support a USB device to be bootable.The only thing I do have is my desktop computer (which is working fine) and a USB external case for the laptop internal hard drive.
Windows home Edition XP My Hard Drive Crashed and have replaced it with a new one. I have the Dell CD's but do not have the valid ID and wonder if there is a way to get the valid ID so I can reload the original software. How do I reinstall the software using the Dell CD's
Just got a new computer with Gigabyte GA-K8SNC-939 Motherboard. The problem is that on each boot , and shutdown, the floppy drive is accessed (i.e. motor runs ).The floppy drive is NOT selected as a boot option in the bios and the access on boot comes just after the 'Loading Personal Settings" screen. On shutdown it is just before the end , not immediately on shutdown.I seem to remember there was a Floppy Seek setting somewhere in Windows at one time, but I can't seem to find it in XP SP 2. As it happens well into the boot cycle, I don't think it's related to the motherboard.
I've looked around and I'm having a hard time finding good info on this. I've looked up stuff like slipstreaming SATA drivers into the windows disc, but I don't think I'm doing it right. I got the correct SATA drivers from gateways website. I'm pretty sure this system just uses the intel SATA Chipset. Any way if anyone could help me install XP on my Gateway C-141XL laptop without having a floppy disc I'd really appreciate it.
I am planning on installing Windows XP Pro w/SP2 build 2180 onto a 300gig hard drive I plan on getting new. So just a quick question, what is the limit on hard drive size that XP Pro supports?
Two weeks ago I installed win7 on my system,but 3 days ago,bacause of some problems,I decided to uninstall it and to setup an older version.But unfortunately I had many problems to setup another one.Although I had the related DVD in DVD drive,after some seonds it asked for the DVD labeled Win XP.Anyhow finally I could setup win XP 2002,but windows only recognizes drive C with capacity of 100GB and I don't have my other drives as before.For your information it's NTFS.I decided to setup Win7
I have this sony vaio laptop, and the good people at sony decided not to give this drive the ability to boot from a usb device (external dvd or floppy)Unfortunately the DVD drive that was built in BROKE, and I need to install windows on this laptop using a brand new hard drive.I can't boot from the windows dvd, I can't boot from a floppy, the drive is totally empty so I can't put anything on it.I CAN however, connect it to another computer and format it, I thought I could make it into a MSDOS bootable drive (like when you format a floppy) but windows does not allow it on a drive this size.
My PC had 6 USB1 ports - I upgraded by adding a 2-port USB2 card, with a USB2 4 port hub. When I had XP Home, all was fine. I then crashed my hdd, so bit the bullet, got a new drive, and XP Pro and started again. The (Via) USB2 card was bought new, as was the 4 port hub - I have the driver CD for the card. According to System Manager, everything's fine, working correctly. But every time I try to use my USB2 memory stick in one of the 4 ports on the hub, it comes up with "This would work faster with USB2 - put it in one of the 4 unused ports", which is unmitigated b/s as it's already IN one of them - changing makes no difference.
Is there any way i can get a copy of my OS (WIN EX) based on my cert #? My SATA hard drive crashed - literally smoked- and my OS is on that HD. It was pre-installed with nothing but a recovery disk.
My Sony Vaio had a file missing hal.dll file. A computer guy tried to use a boot disc to get the file and cant. Says my hard drives have crashed. And he cant do anythng because its a raid system and 2 hard drives.suggested i call someone to remove the data. its not backed up!!!
My systemwas suddenly crashed and I askedone of my company person to helpme in recovering the data on my hard drive and he said that his system is not registering(recognising) my hard drive due to which is he unable to restore the data. he suggested to contact one strore who will chargefrom 2000 to 5000 $ and I don't have that much money to recover my valueble data. how to recover my data on my hard drive.
When I boot my computer, it tells me it can't load windows because the following file is missing or corrupt:<windows root>system32hal.dllCan i use the "repair console" to copy this file onto the hard drive from a floppy disk? If not, how do I rectify this problem?
My laptop died and I removed the hard drive.i hooked the hard drive up to my new laptop via a SATA/IDE cable.
I can see the old hard drive in the E drive and it appears that all the contents are there by the size of the hard drive (same as when I had it in the old laptop) but I can only see, actually view, a very small percentage of the drive.
My goal: I want to transfer all old music, word documents and photos from old laptop into new laptop.
Installed new hard drive, along with XP Home (recovery disk).Before my system crashed all my motherboard drivers were on D: partition.XP loads okay, but it is unstable - for example I cannot start msconfig under "Normal" start up. It crashes. I will not list all the BSOD - but XP doesn't like something.I have no devices connected apart from basic graphics card (which XP loaded the drivers for okay). I am waiting for XP Pro to be delivered, so I am hoping that my unstable XP will become stable after I upgrade (or full installation) of a retail version.
Prior to installing my current XP (one time of at least 30 others - as kept crashing),I tried to load my motherboard drivers from the disk my manufacture supplied.is it possible that my XP Home is unstable BECAUSE I do not have my motherboard drivers loaded? That might seem a naive question - but I honestly do not know, and I've started to become a tad paranoid as these problems have been ongoing for 5 weeks.
my system crashed for no reason. when i started it back up, it was in dos with the menu of 4 boot options. hard drive, cd rom etc.. it wont boot from hard drive so i put the windows disc in and tried to boot from it. it tried to setup but it said it cant find a hard drive and to exit setup.
My hard drive recently crashed and I reinstalled windows xp, the copy i brought with the product key turns out to me fake or blacklisted by Microsoft, the problem is i scanned the disc used for installation and it contain more than a few adware programs and viruses. My PC is operating noticeably slower than before the crash, I scanned my RAM with MemTest. There is also a couple adware programs that comes up in processes, only bitdefender blocks it from popping up when using the internet. Also my Primary IDE channel is using PIO Mode instead of DMA, ive heard this can be because of viruses, should I reinstall windows?Could this mean the windows has been modified and what should i do?
My computer has been taking like 5 times to start up. sometimes randomly shuts down and runs really bad. i got online chat with sony. they first said to do bios reset.f2 didnt do anything so they said back up and do system recovery.
I had put my pc off with the on/off button, because I was in a hurry. Later when I tried to open it, it shows the BIOS screen and than nothing happens it just turns black and thats it. And it goes off when I put my finger slowly on the on/off button.
I have tried replacing the power supply-no change.I've tried unhooking cd-rom, floppy, replace ram & everything remains unchanged.Bios never recognizes a hard drive. I've tried several known good hard drives and the original hard drive works in another machine. It starts POST & I get HP splash then back to NO OPERATING SYSTEM FOUND, It doesn't find the CD rom drive either. What might this be related to? I've replace hard drive cable, floppy cable. The only cable I haven't replaced it the cd-rom drive.
The hard drive works as a slave in another computer. I am running virus scan and spyware on. But, why won't it work in the other computer? I'm thinking its somehow related to the bios and the fact that it cannot see the drive in the bios. I don't find anywhere in this particular bios where I can try to auto recognize the drives
I am using XP on my laptop,tried to boot up my computer and it was extremely extremely slow. Took maybe 15-20 minutes to get started.When the desktop finally came up, it was in a bad resolution. The cursor would move fine, but if i tried to click on anything it would pretty much completely freeze up.Id maybe be able to minimize a window, but no program would open at all.I don't really know what to do since it is pretty much impossible to do anything on the computer.I checked my hard drive in the computer BIOS and it didn't report any problems.Not really sure what my next step should be.I have a lot of information on my computer that i really can't lose, but don't really know how to back anything up at this point.What can i do?
I am trying to get a machine up and running for a friend. It is one he bought off of someone up north and he doesn't know the admin password to be able to use it. I originally was going to use some software I found in the forums that requires me to boot from a floppy or a cd. I checked the BIOS and have it booting from the hard disk last and yet I cannot boot from either the cd or the floppy.At this point I am willing to Fdisk the whole thing and start fresh. It shouldn't really matter since he has never been on the machine before and can't have any data that he would care about.
just installed a second internal hard drive. tried to access bios at start up (to setup hard drive) but system doesn't respond to ANY keyboard keys. system just continues with normal Windows boot-up. once XP is running all functions and software seem fine. no matter how many times I try at "Press Del to enter Setup" nothing works. Jusat before I had this problem, I had a problem with software (which I have removed) that caused my system to lock up. when I rebooted system stopped and offerred reboot options, ea: Safe Mode, but I the arrow keys would not work, system just went directly to Windows boot up.how can I access the bios if system doesn't respond to keyboard?
I recently got myself another hard drive, that I wanted to install in my computer. From before, the computer contained a hard drive and a CD-burner. I do not have instructions on how to set the jumpers on the new hard drive to make it master or slave, so I had to try my way. I figured how to make it master, so the present configuration is that this new hard drive is secondary master, and the CD-burner is secondary slave. BIOS recognizes this, but unfortunately Windows does not seem to find any of the devices on the secondary controller with this configuration.
I have windows xp professional sp2, I uninstalled Symantec Antivirus then rebooted computer. Went through bios load screen then came a black screen (no hard drive activity or nothing) and stays black with no hard drive activity or anything for about 5 minutes. After the 5 minutes I get the Windows XP loading screen then boots as normal.
Prior to me uninstalling symantec it went straight from bios screens to windows xp loading screen almost immediately. The reason I uninstalled antivirus was I wanted to try a different antivirus
I'm running a pc with a 975xbx board and an e6600 that has worked fine for 2 years plus. A couple months ago i replaced my computer case, power supply, and got some new storage hard drives, but my RAM, mobo, cpu, and optical drives stayed the same.I was running windows xp fine for this whole time....and then a couple days ago as I was surfing the web, the computer just shut off spontaneously. no warning, no nothing, just black screen and the computer was off.Now, when I start up, I'll get to the windows startup logo before I get a 0x00000007e blue screen crash.In BIOS, my hard drives, RAM, etc are picked up fine. Just for kicks i moved some ram around, dropped to one stick, unhooked the optical drives, yet the problem persists.Now, if i throw in my windows xp install CD and try to repair or just reinstall, it doesn't find the drive at all. but the bios does.
If i take a new formatted hard drive and insert it, the xp install again doesnt find it.I have 2 raid controllers on my intel board, and the floppy disks for both, but when I boot the raid controller screens pop up fine and recognize drives prior to the windows logo. If i throw my install CD in, however, and hit F6 to go to the raid controller install, the xp cd can't seem to read my floppy disks, as if they aren't even there. but the floppy drive light is on, powered, and the cables are plugged in.This is just really confusing, as if my computer just doesn't read anything but the CD drive.I'm at a loss. I'm willing to just do a clean install of windows on a formatted hard drive, but the windows CD install program won't detect the new drive (it is low-level formatted).I'm using XP professional and it's a full install CD, not just recovery.
I need to flash the BIOS on my motherboard. First, however, I need to create a BOOTABLE floppy on which to save the original motherboard BIOS and the flash memory writer before flashing the motherboard to the new BIOS. That way, if the new BIOS doesn't work, I can Flash the old BIOS onto my mb,. A WinXP Pro SP2 Command Prompt will not permit me to execute Format AS. So, how can I create a bootable floppy disk under WinXP Pro SP2?
When I try to boot the computer I get the message: Disk Boot Failure, Insert System Disk. I have used the manufacturers (Maxtor) Diagnostic software to check the hard drive. Everything checks out except for the BIOS Extension Support Failed. I have taken the ribbon cables and power cables off the hard drive and reseated them. No difference. I can see everything when I use Bart's PE. I have all the files backed up.
I want to reinstall windows, I have my restoration CD, problem is that the cd driver of my laptop doesnt work, so I got an USB external one. I can use it perfectly during in wndows, but when I intend to use it to boot, it just doesn't happen and continues booting windows from the hard drive.
Laptop froze today without warning. COuldn't turn it back on. Would freeze during boot process, even when I tried to boot in Safe Mode.
Left it half hour and tried again. Managed to get XP going. BUt it's still not right. Freezes apparently at random, 5 or so minutes after boot. Needs re-boot.
how do i clean the hard drive on a laptop and pc, they are both very old and i just want to be sure that no personal information is left before i recycle them.
