Sony Viao Recovery System Doesnt Start, Cycles, And The Computer Doesnt Start
Jul 15, 2010
Im new, so bear with me please. The problem is on my old Sony Viao Model PCG-6H4L XP. I wanted to start fresh and the recovery system for windows gives me only a limited number of dates. I thought that the Viao recovery would do the job.I was wrong. I haven't checked recent forums about problems with this, so I went ahead and broke my laptop. Before the Recovery system starts, my laptop says, with a black background.
My computer has been taking like 5 times to start up. sometimes randomly shuts down and runs really bad. i got online chat with sony. they first said to do bios reset.f2 didnt do anything so they said back up and do system recovery.
My computer all of a sudden shut down, when i restart it, the screen with the safe mode options comes up but when i select any of the otions it just restarts and th screen with the safe mode options comes up again. so i tried to format the hard drive and reinstall xp but right before the partioniung option comes up the BSOD appears. the problem occured about a day after i added a slave hard drive, so i removed the hard drive an restarted the computer and reinstalled xp, but to no avail.
I had put my pc off with the on/off button, because I was in a hurry. Later when I tried to open it, it shows the BIOS screen and than nothing happens it just turns black and thats it. And it goes off when I put my finger slowly on the on/off button.
My PC is running absolutely stable (7 hours of orthos). Just bought this EVGA motherboard and swapped it in place of an Asrock motherboard and got everything running, overclocked and stable.Before I got Windows XP running (previous installation from the asrock mobo), I encountered an issue and i isolated it down to one of the 200gb 7200.7 SATA HD's.IF this HD is plugged in when the PC boots, then the Windows XP Boot screen appears and hangs. NOTE: it DOES NOT freeze - the bar still moves, but there is no HD activity and the pc stays like this for hours on end. Note again - this is not a hang. the activity bar still moves from left to right, and it keeps doing this indefinitely it seems (with no HD activity from any drives). IF this HD is not plugged in, the PC boots in straight away. All drivers are tip top (nforce drivers, SATA drivers). However if I hot-plug this drive from within Windows, it works fine!. The PC just doesn't boot with the HD plugged in.
A family members sony vaio will not boot up, the computer doesnt load windows XP (The windows XP loading screen appears but will then goes blank and reboots automatically.) When the computer first turns on a blank screen appears with text saying "we're sorry for the inconvienice, etc..." then has a 30 second timer for which option i would like to choose.These are my options below (which none work). It doesnt work on Safe Mode, Safe Mode (Networking), Safe Mode (Command Prompt) or even the "last known to work configurations". Im totally lost on what i can do from here. I need assistence people!!
My computer will not start up. It boots and and gets to a screen where it asks if I want to start windows normally. I do that and then the window xp logo appears and then it reboots and starts all over again. Right after the window xp logo appears something runs across the screen and disappears to fast to see what it is.I have norton internet and antivirus and the sp2 pack of windows xp installed. However, I have not installed anything recently. Just prior to the problem my comcast high speed internet went down and when it came on that is when I had the problem. I can boot from the CD-rom and have done a check with a cdrom norton and I have no viruses, but it is not the latest viruses on the disk and I dont know how to down load them onto the cdrom from norton site.
I have a toshiba laptop. It was working fine. I think my daughter shut it down wrong. Now it opens to the menu to select Normal, Safe Mode, etc. No matter what I pick it begins to start, gets past the Windows logo screen and then a blue screen flashes up and it restarts before you can ever read the letters on the blue screen. It just keeps cycling. Will not start. I am on XP sp2. Can't tell much else since I cannot even figure out how to get it started. I have removed the battery for 5 minutes and pulled the power cord.
I just got a used xp.. its slow and i cant seem to get any thing to work on it like restore , defrag,and i cant get it to change from dial up to dsl. pls i really need some help im all new to the computer
I found that i couldnt go to: start-"all programs" and have it work. when clicking all programs it does nothing. then, i remembered a dvd triedinstalling "hot llama" and it was stopped in the middle. I think that may be the issue, tried to do system restore and that wont restore to any date.
Literally every single time I try to use it it doesnt work. always says restortion incomplete. I have it set to use the max disk space. I even tried formatting the hd, reinstalling windows, and then the I tried using it and it didnt even work then.
I have a new hp media center pc m7750n that came witih vista installed. I have put xp back on it twice. The first time was just xp home.the second was xp64 corporate edition. both times after i ntsall i can not see my ethernet connection. i have tried using the connection wizard to no avail. Im assuming imight need a motherboard drriver but dont know where to find the one i need. also im puttting xp on a seperate hd and im having trouble using both at the same time. it says bootmgr missing when i install the xp drive. even though when i installed xp on the drove with the vista drive unplugged it work fine to begin with, now even though i unplugged the vista drive it still says that. im assuming i can repair the installation. my main worry though is the ethernet connection.
I cannot create a system restore point, nor is System Retore creating any automatically. I tried rebooting my system, using the check/uncheck box in system properties, using the "Run" line, and trying to run System Restore in Safe Mode. I also tried copying the "framedyn.dll" from the windowssystem32wbem directory to the Windowssystem 32 directory (I don't know if it's supposed to be there or not. The only option I have left that I know of is to reinstall Windows XP.
My computer has several problems. The most serious is not being able to get Windows XP to load.I have tried booting in safe mode (F8) but I keep getting an error screen. I installed a game on the computer today that apparent has caused this problem. Any advice on how I can boot to safe mode to remove the program and do a system restore would be appreciated.
I tried to run a knoppix (live linux distro) cd and changed the boot order (F2 setup) to boot from cd. Ok... the cd still wouldnt boot, so I went into F2 again and made all devices non-bootable except the cd player. When I tried this method... I was informed that my cd drive isnt a bootable device. I checked a few settings but couldnt find anything in regards to this. Im just trying to boot from my cd player.
Computer wont start up proper anymore.. it goes past the welcome screen and goes to my desktop but only shows the screensaver and doesnt fully load up its strange, its just blank and ive tried restarting many times but still the same result and also waited for a while to see if it was a duration problem but still no result.i took a photo with my phone to show u how far it goes.
For the past 4 months, sometimes the computer doesnt shutdown properly. the computer power stays on but the monitor isnt detecting any signal from the pc. along with this I sometimes get a BSOD when shutting down stating that its caused by mv61xx.sys and the error code is 0x08E. I dont know why its doing this
Had problems with virus, couldnt update Virus or Malware Protection. I did full shred System Recovery from partition ( HP- A1130N -Windows Media Edition- Version 2002 Service Pack 2. Dowloaded AVG Virus and ran scan, all OK.Went to MS Dowload center and downloaded and installed 87updates to include IE8,started computer, all OK. Then updater said needed to download SVC Pack 3- took a loooooooooooooong time. THEN COMPUTER WOULDNT START- tried the two options it gave me but no go back to same black screen with boot options-- regualar- last working point- safe mode etc. no go. At this point I did a full System Recovery again and downloaded virus protection again.
whenever I try to play music it doesnt play, it says low on memory, whenever I open any Microsoft Word program it gives me some error about a license, and whever I try to copy and paste anything, it doesnt let me. I have a few partitions on my hard drive and whenever I copy one file or a folder or anything, I cannot paste it anywhere. If I open Control Panel, the screen doesnt appear as usual, all the icons are on two columns on the lft side with a scroll bar next to them. If I try to open Add/Remove programs, it comes up all garbled. I was going to just reformat the whole computer but it will not boot from the cd rom drive now. And whenever the computer is booted in W2K and I try to browse the CD in My Computer, it just says "Please insert disk in drive...." Also, whenevr I restart, it sits on my desktop for about 5 minutes before it finally brings up the icons and everything. It has never done any of this, it just started this morning.
I had a problem with my windows. When ever I plug in my Flash drive (i got a few: kingston data traveller 1gig, pendrive 128mb,etc) onto my usb port. Window will be able to detect the drive had been plug in. I can see the "Safely Remove Hardware" icon on the right side of my task bar. But i cannot see the drive appearing in "My Computer". If I double click on the "Safely Remove Hardware" icon and try to view the external drive information, I can see that its already detected and being assign with drive E: . Even if I open a windows explorer and type in E: , it will throw me an error "Cannot find 'file:///E:/'. Make sure the path or Internet address is correct". But if I were to restart my computer, then i can see it for the first time. If I disconnect it (thru the "Safely Remove Hardware") and plug it back in (or plug another flash drive), I cant see the external drive. Causing I had to restart my computer multiple time a day.
Have VAIO VCG RC310G. Windows XP current SP. Tried to load audo disc to Itunes. System crashed. No picture on screen (black). Tried to use F8 safe mode start without success. Have system recovery dvd. Placed in drive. Turned off machine. Turned on. No screen, just black. Hear fan and drive spinning.Checked monitor and see the Analog/Digital message on the screen, (seems to be working.) This is the limit of my knowledge. Any ideas on how to get the recovery disk to be seen by the computer? Help Juscause (I despartely need it). ps, not worried about the data on the computer, but I would like to recovery if possible.
windows xp general. it doesnt appear.so i dont know what the reason can be. could it be that my post is too long (is one page word long)? so the forum doesnt take it?....
after I make a new folder or rename something or paste something in a window it doesnt show up til I refresh the window before it would show up with no problem.
I just did a fresh install of XP on my new PC and now, for some reason there is no sound coming out of the speakers. It worked before I did the reinstall. The digital sound is built into the Gigabyte mobo and I made sure I reloaded the drivers. Everything looks okay in the Device Manager. I've looked at everything I can think of, but I can't get the sound to work. When I plug in my USB headphones, they work fine. I keep thinking it's something simple I'm missing.
I was having a lot of troubles with XP PRO after a CPU failure, when I tried to do an XP installation Repair. It failed miserably and after a month of posting and searching for answers, I threw in the towel. I reformatted the HD and did a clean install. On the advice of a MS Tech, I downloaded SP3 and installed it first thing. After I got everything up and running with all the updates, I discovered that XP no longer recognizes my USB ports as USB2. I found some original drivers on the Motherboard installation disk, but it will not allow me to install them because my XP SP2 install disk is already supposed to have them. I tried removing all the USB drivers and forcing XP to figure it out, but no luck. It is an ASUS P5GD2 Deluxe with a P4 processer and an XP PRO SP3 Operating System.
When I right click on desktop and choose Properties, nothing happens.When I go to control panel/appearance and themes and click on anything,nothing opens (except folder options and "Taskbar and Start Menu" ) The only way I can change wallpaper is by right clicking on an image and selecting set as wallpaper, but I cant do anything else without properties.
I want to reinstall windows, I have my restoration CD, problem is that the cd driver of my laptop doesnt work, so I got an USB external one. I can use it perfectly during in wndows, but when I intend to use it to boot, it just doesn't happen and continues booting windows from the hard drive.
