I found that i couldnt go to: start-"all programs" and have it work. when clicking all programs it does nothing. then, i remembered a dvd triedinstalling "hot llama" and it was stopped in the middle. I think that may be the issue, tried to do system restore and that wont restore to any date.
View 5 RepliesLiterally every single time I try to use it it doesnt work. always says restortion incomplete. I have it set to use the max disk space. I even tried formatting the hd, reinstalling windows, and then the I tried using it and it didnt even work then.
View 6 Replies View RelatedI cannot create a system restore point, nor is System Retore creating any automatically. I tried rebooting my system, using the check/uncheck box in system properties, using the "Run" line, and trying to run System Restore in Safe Mode. I also tried copying the "framedyn.dll" from the windowssystem32wbem directory to the Windowssystem 32 directory (I don't know if it's supposed to be there or not. The only option I have
left that I know of is to reinstall Windows XP.
I recently downloaded some drivers as I was trying to install a new printer who's software would'nt load. This did'nt solve the problem. I decided to get a printer that I had had before, Brother DCP-110C as I knew this had worked well. I tried to install yesterday (28th July) but could'nt and my PC keeps switching itself off near the end of the installation. I then thought I would use System restore to go back to a happier time when I had the first Brother printer. previous saved point wont let me to restore
View 4 Replies View RelatedI am unable to acess any of my or XP's restore points. When I went to restore to an earlier date. All appeared to be going as it should. However, when I got to my profile a message window came up that said unable to restore to (chosen date/time) etc. I chose 3 other restore points over the last month, thinking it might be some recent problem, still a no go. Any help would be greatly appreciated? Is there a utility to use to check and see if there is something corrupted?
View 7 Replies View RelatedI'm trying to do a system restore without success. It goes through the motions but after it restarts always say "cannot use restore point, no changes have been made to your system". I'm trying to correct a font setting change that happened without my knowledge.
View 13 Replies View RelatedMy system restore is enabled but no matter what bold restoration point I choose I am told system can't be restored to that date, choose another restoration point. I do, the system shuts down and restarts and I get the same message.
View 7 Replies View RelatedInstalled Norton Internet Security 2005 and now, whenever I try and do a system restore it says "System restore encountered a problem and has to close". It does this all the time, even in safe mode. Symantec has mentioned that I should turn off NIS2005 and try system restore. If it then works it is a Microsoft issue. I have been onto the Microsoft websites and they do not mention how to repair or reinstall system restore
View 3 Replies View RelatedIm new, so bear with me please. The problem is on my old Sony Viao Model PCG-6H4L XP. I wanted to start fresh and the recovery system for windows gives me only a limited number of dates. I thought that the Viao recovery would do the job.I was wrong. I haven't checked recent forums about problems with this, so I went ahead and broke my laptop. Before the Recovery system starts, my laptop says, with a black background.
View 8 Replies View RelatedI am trying to use the system restore function on windows XP, but every time i select a restore point and the system reboots, it says that the restoration was incomplete and "no changes have been made." I have tried multiple restore points. Microsoft.com suggested that i verify that the task manager, WMI, and system restore services were running, and they are. I also tried disabling my antivirus program, but the same thing happens.
View 9 Replies View RelatedI just did a fresh install of XP on my new PC and now, for some reason there is no sound coming out of the speakers. It worked before I did the reinstall. The digital sound is built into the Gigabyte mobo and I made sure I reloaded the drivers. Everything looks okay in the Device Manager. I've looked at everything I can think of, but I can't get the sound to work. When I plug in my USB headphones, they work fine. I keep thinking it's something simple I'm missing.
View 6 Replies View RelatedMy computer has several problems. The most serious is not being able to get Windows XP to load.I have tried booting in safe mode (F8) but I keep getting an error screen. I installed a game on the computer today that apparent has caused this problem. Any advice on how I can boot to safe mode to remove the program and do a system restore would be appreciated.
View 8 Replies View RelatedI want to reinstall windows, I have my restoration CD, problem is that the cd driver of my laptop doesnt work, so I got an USB external one. I can use it perfectly during in wndows, but when I intend to use it to boot, it just doesn't happen and continues booting windows from the hard drive.
View 11 Replies View RelatedLast Saturday was the last time that System Restore worked for me. Counterspy set a restore point before doing its thing. Since then I havn't been able to create a restore point all week. I'm running XP home edition.This is what pops up when I try to create a restore point. System Restore is unable to create a resore point. Please restart the
computer, and then run System Restore again. Restarting will not help
I reset my Windows after an apparent virus and now cannot get back to restore my system. The e-mail does not work and I would like to restore my files (its my last semester of school). System Restore does not work.
View 2 Replies View RelatedMy system restore has not worked in XP for some time now and I have tried a XP repair and that did not do it A tech told me to remove the monitoring from the drives than reboot tehn put monitoring back on
View 10 Replies View RelatedOver the last two weeks, my XP started to take longer and longer to shut down. Now, it doesn't and I have to manually press the startup/shut down button.
XP is 2002 version; SP ;, 2.3 GHz CPU; 2.29 GHz and 0.99 GB RAM.My virus/security suite is Zone Alarm.I tried to use System Restore and though it does shut and restart the computer, system restore tells me it could not restore the computer.
Was having a problem with the computer, doing weird things so I thought that I might go back and do a restore from an earlier point to see if it solved the problem. Anyway, went to earlier point, restored sort of, after it did everything, it told me it could not restore to that point and that nothing was done. I went to another restore point further back, same message, was not installed at the restore point, current settings are intact. Did this 2 more times, same results. I have made restore points along with the ones the systme makes. None of them works.
View 2 Replies View RelatedAfter a marathon problem with Windows not booting, I did a clean install on another hard drive. Now, one of my PCMIA ports (on the side of my IBM A31 Type 2652 laptop) doesn't work. Both were working fine prior to my boot problems and subsequent reinstall. One port still works, but I need to be able to use both for 1. a wireless card and 2. a USB 1.1 to 2.0 conversion card that I use when I print, etc. I've done Windows troubleshooting for drivers, etc., but Windows (as usual) found no problem.
We have Levine/Young The Complete Reference-Windows XP. Reading through before I did the clean install, I noticed a mention that sometimes this happens when XP is reinstalled, but there is no solution to the problem mentioned. I'm at a loss to getting both ports to work. I need a solution before the weekend is over.
A few weeks ago, I received a blue screen of death that would not get off my computer. I had the Windows Antivirus Pro Virus that would not go away. I am going to school tomororw and needed this off my computer. So I decided to wipe the hard drive clean with the Dell CDs that came with this purchase. I downloaded Windows XP and some of the drivers. Some of the drivers that i tried to download say they downloaded but then do not come up. Broadcom440x10/100 is saying the network cable is unplugged, I have no idea what that means and internet will not work. What can I do manually to make this work?
View 4 Replies View RelatedMy PC began looping from the Dell splash screen to the Windows start-up screen, then clicking off and repeating....over and over. I tried several things and couldn't even get System Restore to work. Finally, after several well-intended friends had me fooling with my command prompts (I'm sure that was a mistake), I decided to just reinstall Windows XP. Well, now it's reinstalled, but I can't connect to the internet, none of my drivers are recognized and nothing is showing up on my desktop, When I go into My Computer and look on my hard drive, all of my programs and files are still there....but the operating system doesn't seem to know where to find them. I have a desktop Dell Dimension 4600.
View 1 Replies View RelatedI am trying to use system restore, but it does not work. I select a previous system restore point to restore to everything works fine until the computer reboots. Then its says system reboot did not work, nothing was changed and try another restore point.
View 3 Replies View Relatedmy pc (XP) will not boot or close up clean. The only way I can boot is using safe mode. Is there a better way to fix boot problems without doing a complete sys recovery? The instructions for complete sys recovery is pretty vague it seems to me.
View 8 Replies View RelatedI am running an HP Pavilion a1624n with Win XP Media Center 2005, running on a wireless network with one other desktop and one laptop. I also use Firefox browser and have NAV 2007. I have had this PC for about two months and the first time or two that I tried System Restore, it worked OK, Now, (with System Restore turned ON),it has gone downhill and when I try to run it, it goes through the process but at the end I get the error message "your computer cannot be restored to 00/00/00. No changes have been made." It does not make the automatic 24 hour restore points, even though it does make restore points when new programs are installed and manual restore points can be made. It works fine in Safe Mode using the rstrui.exe command. This latest problem started yesterday.
View 11 Replies View RelatedI recently have had problems with my computer slowing down after clicking on programs such as Firefox. It takes about 40 seconds for the hourglass to go away and then the program will finally load. Other programs also. I have been using some anti-virus and spyware programs thinking I had a virus or spyware , such as Spyware Begone. It found a spyware and deleted it. I tried to use System restore and it only showed one restore point in January (the 27th when I first tried Spyware Begone), but would not restore to that date. I could not get Restore to go back to December. System Restore is on and running. Any suggestions would be helpful. I also used System Restore in Safe Mode thinking that would help, but it would not restore to the 27th. System Restore works, but after completing it the message says "could not restore to the 27th).
after a few hours my computer slows down and then freezes. The internet and the network interface also doesnt work, meaning I can't ping 127.0.0.1 but for some reason the email still works. When I ping localhost I get a request timed out error. When I try to go to a site an alert pops up in firefox thatthe document contains no data and in IE it simply says server can't be found. I have run spybot, norton, avast, and updated the network card's drivers. I think that the problem with eventually freezing is nortons active protect process which seems to always run at 75% plus.
View 6 Replies View RelatedI have had a slightly annoying problem with Outlook Express which I use as my default mail client. Everything seems to work fine apart from when I try to open PDF files directly from OE, it tries to open them with notepad, which obviously doesn't work. I can save them anywhere else on my computer, my documents for example, and opening them from there works fine. I have the latest Adobe Reader. I can't find anyway to tell OE to open these attachments using Adobe Reader.
View 13 Replies View Relatedi havent put my computer on standby in a while but last week when i went to start>>turn off computer>>standby, the computer wouldn't wake up from it. the monitor's LED kept flashing green indicating the computer's still sleeping. tried pressing the power button but doesn't work. i have to reset the computer everytime i put it on standby.
View 4 Replies View Relateddo you know how to fix a windows xp blue screen if ctrl+alt+delete doesn't work or right click any thing else.
View 1 Replies View Relateda while ago something went wrong with my computer im not sure if its spyware or just something changed my settings. I use Spybot S&D and Ad-aware and Norton Antivirus and have completed scans for all of them. The context menu (right click) does not work on files in Windows Explorer or on the desktop, but works in Start menu, web browser, etc.Also I cannot access Properties for files. I have tried going through File >> Properties, but the Properties box never appears after I have clicked the link.At the same time of this problem my system restore suddenly disabled itself and will not let me enable it (System restore encountered problems trying to enable/disable system restore on one of your drives. Please restart your machine and try again).I have logged on in a different account and the context menu and properties work, so it only seems to be in my account.
View 4 Replies View RelatedI have tried to restore my system to the first date available. xp always fails to load and I have to go back to "start windows from the last good configuration" – I started in safe mode, disconnected from the internet- scanned with NAV cleaned a bunch of junk off, scanned with Spybot S&D – cleaned some more junk off tried to restore to day one – same problem - go back to "start windows from the last good configuration"- several hours wasted and I am going crazy. This may be a virus problem
View 5 Replies View Related