everytime i shut down my comp, when i turn it on again i get an error message that says 'insert boot disk' on the startup screen. i'm not sure what the exact message was, but it was something about boot disk i should have written it down anyway, i turned the comp off, and shook the CPU a bit and then tried again and it started. I did a virus scan and every things clear l. i don't know much about these things lol so doing the virus scan must sound a little silly.so then anyway, i had to turn the computer off again and then when i switched it on i got the same error message. i pushed the off button and then put it on again and it worked. how do i prevent getting the error?
In need of some major help, whenever i load up my computer everything loads up fine untill i get to the status bar screen which just loops and loops over and over again and nothing happens from that point onwards not only that but it knocks out all my devices i.e keyboard, mouse etc. I can open it in safe mode no problem and in this i have done numerous system restores. If i leave my computer off or idle for about 12 hours it worls again after that but about 2-4 days later the problem happens again this has happened aprox 7 times now. I really need someones help as this is my main computer and i have everything on it
Getting error message when trying to change out a 10 gig to a 250.NVIDIA Boot Agent 201.0462 PXE-E61: Media Test Failure, check cable PXE-M0F: Exiting NVIDIA Boot Agent DISK BOOT FAILUR, INSERT SYSTEM DISK AND PRESS ENTER" this drive I am upgrading also has Windows XP OS. I have another drive on the computer that has 160g.
My computer was working perfectly well. I left it on and went out. When I came back it had a black screen saying "boot disk error, insert system disk and press enter" in BIOS. This has happened before but I just hit my pc then rebooted then no problem. This time it didnt work, I have tried to vacuum the interior of my pc but to no avail.
first i get the HP blue screen. I tried F1, but i dont see my hard drive in the boot menu. I followed some steps in Hp's web site- took the cpu apart and unplugged both hard drives from the motherboard, plugged them back in. when i restarted ,i got the HP screen and then windows started to load up. After a few seconds the HP screen came back up and then the black screen: sk boot failure, insert system disk and press enter. I also noticed that pressing F10 for system recovery does nothing.
I want to repair my windows cause I doesn't boot up properly..I hve followed instructions but when I put cd in it takes mr to set up windows n asking mr to select partition..so I select my current system drive n it is asking mr to press c to continue setup using this partition..N then it ask me to format or leave current file system intact..am I doing something wrong, how come I don't have the repair windows xp option like it shows on the user guide?
Everytime I try to start AVG anti-virus test center or Outlook from the desktop, this thing is looking to the A: drive (3.5 floppy) and giving me the following error. "There is no disk in the drive. Please inset a disk into drive A:" If I select 'Cancel' or simply hit the (x) at the top left to close the dialog box, the program starts normally. What would cause this computer to look to the A: drive when starting a program?
i'm using window's xp. whenever i start my i-tunes program, i get an error message telling me "i-tunes has detected a problem with your audio configuration. audio/video lpayback may not work properly." at this point, i no songs will play, and the sound doesn't come through the speakers when i'm watching any videos on the web either. Every once and a while, my monitor will flicker, then power down, leaving me with no choice but to manually shut the pc down. in addition, the desktop and browser graphics have begun to deteriorate. they almost look like somethign from windows 95. i have no idea where to start,
My dad sent my daughter a "E Machine" with XP Home. Before he sent it, he transferred all of his personal files. When I hooked it up, the screen said "Boot disk failure. Insert system disk and hit enter". The company sent us a new set of bootable CDs as we thought the problem might be in the CD.
I have a dwsktop vaio When I boot from cold it does not find hard drive. I get an error message Disk boot failure Insert system disk and press enter. If I restart the computer and go into the bios it does not show the hard drive but when I come out of the bios it then boots up.It will only bootup if I go into the bios first?
i would like to embed this in a forum i belong to. i have embedded images and Internet. now i have this tiny audio file i want to embed and i get this message when i try: you may have entered certain html or script tags which are not permitted. you can insert html and flash, but not script or other objects. the above is how i've been trying to do it so it will play on the forum thread. i don't want just a link to the other site. also i have used embed in place of audio and that doesn't work either.
Im trying to repair install windows XP on my computer.I get up to the actual instalation part and it gives me this message:'Please insert the Compact Disk labeled ' VIA AGP Filter Driver Disk' into your CDROM drive (and then click OK. You can also click OK if you want files to be copied from an alternate location, such as a floppy disk'If i click cancel my mouse locks up and my screen flashes on and off and when i reboot it starts up the installation normally again but gives me this message halfway through the instalation.
In windows XP Pro. Error message: there is no disk in drive Please insert disk. (Refering to A drive). this happened after trouble with an old cable. Replaced the cable and this message pops up on boot.
Whenever i start my computer, all i can see is my background. i tried ctrl+alt+delete and that pops up, but nothing else happens. after about ten minutes, it finally reaches the desktop stage. its a 2005 compaq presario with an added wireless adapter card and extra RAM.
I am unable to boot my PC most of the times.Whenever I switch on my PC,I see the following message nine ot of ten times. DiskError/Boot Faliure Reboot and select proper boot device or insert Boot media in selected boot device If I press enter after this messages & keep pressing following messages appear from time to time (Not simultaneously). If just after making the switch on, I press F2 key to check the boot device preference
If just after making the switch on , I press f11 key to reach the boot menu I always find the 1.44 MB Floppy option highlighted as the booting choice.(though there had not been any floppy in the floppy drive, I dont have any really)I make the hard disk option highlighted & it solves the problem only a few times. But next time when I try F11 key to check the boot menu again I find 1.44 MB floppy highlighted.
I had a ton of problems with my computer (corrupted files, registry, etc) until I found out that the hard drive was the responsible. (70ish bad sectors) I bought one last week. The computer ran fine. Last night I got some errror about a DLL being corrupt (I think it was sxs.dll) and I had to run CHKDSK. After a while I turned the system off. Today I turn it on, CHKDSK runs automatically, then the system fails at starting up: the mouse arrow appears, but nothing more.It can't be the hard drive, as it's new. Bad RAM maybe? Could it be some software? P2P, games, virus, anything? Is there a way to fix it? I'm not gonna format, there's too much data at stake. I'm using XP SP1, with AVG.
I'm having a problem with my explorer.exe. When i start the computer, explorer.exe doesn't start up. I have to manually go into task manager and run it from the new task tab.
The computer was fine friday night. Last thing i did was run it in safe mode and run my Norton anti-virus software, since it takes a few hours to run. But when i restarted the computer on saturday, it greeted me with an empty desktop. I did a few preliminary things such as run some spyware programs (spybot), ran the Norton antivirus again, and did a system restore from a week a go, but to no avail.
I would very much like to get this fix. Im about to start writing my thesis for school, and i need my computer to be at its best behavior. Can't lose a 100 page document few months before its due. Im including the HJT log in case there is some valuable information. I kinda know what should be running in my computer, but maybe you guys can see something different in it.
Since removing the shipped HP HDD from my PC and replacing it with a 3rd party fresh one, I am concerned about how I will now go about recovering my PC. When Windows had problems in the past, I could simply press F10 on startup and there was a diagnostic section which allowed me to reformat in an either destructive or non-destructive way. What happens if my computer doesn't start up nowadays? As in, the Windows Loading logo screen appears and then the monitor goes black and stays black.. Is there any software or method to allow me to have some sort of management over this? Sorry if I have not been able to correctly ask my question.. Kinda hard.
My computer is Toshiba Satellite A215, with Windows XP home edition. I had Service Pack 2, but about a week ago, I updated to Service Pack 3. After installing Service Pack 3, the whole computer slowed down and started acting weird. The speaker started to make noise, it started to show error messages often, the internet does not work smoothly, spyware & virus search take 10 hour or more and never finish (it used to take only a few hours), etc.
So, I wanted to put the Service Pack 2 back to my computer. I tried uninstalling SP 3. But it failed uninstalling and I got a message says something like "couldn't uninstall SP3". I thought it might let me uninstall if I restart the computer and I tried to restart, and it never start again. This blue screen with a message, something like "autochk program not found-autochk skipped" comes up and then it goes back to the Windows LOGO screen and keeps doing the same thing. I read about some similar problems, and tried a few things, like starting with safe mode or last setting that worked, etc, but they do not seem to work....
I've read similar posts on this subject on the net and on techguy, but I've never found anything that seems to work.I have a Gateway computer running MS XP media center edition Operating system purchased sometime around the summer of 05.It had been running perfectly fine, well, almost perfectly fine, until just recently it decided that it did not want to start up. At first it was internittant and could be solved by turning the computer on and off along with playing with the powerstrip, now these methods have failed tend the computer refuses to boot up at all
I get a 'no disk' message from my cd players. Windows recognizes they are there, and I have changed cables, drivers and rebooted from install and uninstall but nothing seems to be getting windows to recognize that there is a disk in the cd player.
I've recently install a tv tuner card in my pc running on windows xp sp2.while it recieves the cable signal properly but the screen is continuosly shaking and vibrating all the time.why this occures ,is it the problem of the tv tuner card or my pc?
Compaq desktop, AMD 3200, DVD drive (D) and Asus CD Rom (E) I'm sure I've read about this before but for the life of me, I can't find anything now that fits. My CD-Rom (E) drive appears in "MY Computer" but when I try to use it I get the message to "insert a disk". I've tried data disks, picture disks, and music disks but the drive still thinks it's empty
I haven't installed anything new on my computer but today after having my computer shipped to me via UPS I cut on my computer and where the XP load bar screen was I got: "reboot and select proper boot device or insert boot media in selected boot device".Seeing this I knew I went into the BIOS setup and tried to turn the system priority to look at the HDD. Instead I only had the option of the DVD drive and the CD drive.I have no idea how to solve this problem and don't have any of the recovery CD's. I DO NOT WANT TO REFORMAT because like a bad little boy I did not backup my 4 years worth of work.
I have no idea what my sister and her friends were doing on the comp for a couple of days that i decided not to use it, but now:a few programs take forever to load or don't load at all, but they do show up under the processes tab in the task manager - after pressing Ctrl Alt Del, the task manager icon appears in the system tray, but the thing only shows up a minute later - my system recovery is "not able to protect my computer," and restarting does nothing - actually, when restarting or shutting down Windows, it stops at where it only shows my desktop background and cursor [which is still able to move] and nothing else after that, so i have to hold the power button and force it to shut off - when I right click the desktop and click on "Properties..." [or something similar to this action] it doesn't show up at all, and whenever I try to open any application after that, they don't even load at all either
when I was formatting his pc (for win xp) through bootable cd i formatted his C drive keeping xp cd in drive, later i came to know his drive dsn't read cd properly and unable to complete installation, he dnt have floppy drive. I have portable HDD(hitachi 80GB) and want to install xp via usb(hard disk), is it posible?? nd How to do?
