Want To Repair Windows / Doesn't Boot Up Properly
May 1, 2010
I want to repair my windows cause I doesn't boot up properly..I hve followed instructions but when I put cd in it takes mr to set up windows n asking mr to select partition..so I select my current system drive n it is asking mr to press c to continue setup using this partition..N then it ask me to format or leave current file system intact..am I doing something wrong, how come I don't have the repair windows xp option like it shows on the user guide?
View 2 Replies
ADVERTISEMENT
Mar 25, 2005
everytime i shut down my comp, when i turn it on again i get an error message that says 'insert boot disk' on the startup screen. i'm not sure what the exact message was, but it was something about boot disk i should have written it down anyway, i turned the comp off, and shook the CPU a bit and then tried again and it started. I did a virus scan and every things clear l. i don't know much about these things lol so doing the virus scan must sound a little silly.so then anyway, i had to turn the computer off again and then when i switched it on i got the same error message. i pushed the off button and then put it on again and it worked. how do i prevent getting the error?
View 9 Replies
View Related
Jul 13, 2005
I've recently install a tv tuner card in my pc running on windows xp sp2.while it recieves the cable signal properly but the screen is continuosly shaking and vibrating all the time.why this occures ,is it the problem of the tv tuner card or my pc?
View 2 Replies
View Related
Nov 24, 2008
I have no idea what my sister and her friends were doing on the comp for a couple of days that i decided not to use it, but now:a few programs take forever to load or don't load at all, but they do show up under the processes tab in the task manager - after pressing Ctrl Alt Del, the task manager icon appears in the system tray, but the thing only shows up a minute later - my system recovery is "not able to protect my computer," and restarting does nothing - actually, when restarting or shutting down Windows, it stops at where it only shows my desktop background and cursor [which is still able to move] and nothing else after that, so i have to hold the power button and force it to shut off - when I right click the desktop and click on "Properties..." [or something similar to this action] it doesn't show up at all, and whenever I try to open any application after that, they don't even load at all either
View 1 Replies
View Related
Nov 13, 2008
when I was formatting his pc (for win xp) through bootable cd i formatted his C drive keeping xp cd in drive, later i came to know his drive dsn't read cd properly and unable to complete installation, he dnt have floppy drive. I have portable HDD(hitachi 80GB) and want to install xp via usb(hard disk), is it posible?? nd How to do?
View 4 Replies
View Related
Dec 29, 2005
I can't get the streaming videos to work when viewing pages from the internet. I have installed QuickTime 7.0.3. Instead of seeing the videos, a faded QuickTime symbol with a question mark appears. I am assuming that there is a plug-in problem, but can't seem to get it to work. I tried reinstalling Macromedia Flash as well, but it does not install properly. I get an error message asking me to make sure I am connected to the internet, when I already am.
View 6 Replies
View Related
Jul 4, 2005
It's been a while now that at windows startup, I always get a pop up from my norton antivirus 2005 saying that the config file is not installed.I have to give several ok in order to close definitively the window.After that, norton works fine.
View 3 Replies
View Related
Jan 7, 2005
Right after my computer is finishes booting, suddenly there's a prompt telling me that Internet Explorer wants to change my Internet Protection settings. Then it asks me if I want to give IE permission to change these settings. Of course not (I think?). And the problem is still there. I connect with Verizon DSL, but when I go on Internet Explorer, the browser doesn't work properly- it says "Web Page Unavavailable While Offline"- what's up with that?! I even checked the status of my connnection- "Connected"! It's just retarded.
View 1 Replies
View Related
Dec 6, 2008
In need of some major help, whenever i load up my computer everything loads up fine untill i get to the status bar screen which just loops and loops over and over again and nothing happens from that point onwards not only that but it knocks out all my devices i.e keyboard, mouse etc. I can open it in safe mode no problem and in this i have done numerous system restores. If i leave my computer off or idle for about 12 hours it worls again after that but about 2-4 days later the problem happens again this has happened aprox 7 times now. I really need someones help as this is my main computer and i have everything on it
View 7 Replies
View Related
Oct 6, 2010
My problem in a nutshell. I'm trying to install XP as a repair but it isn't going well. I've done it before and I'm quite familiar with the steps, but this time there is one new wrinkle. Windows tells me it sees two partitions, which it shouldn't. There is only one, but it is comprised of two HDD's in a stripe setup. There is a total of 1.2TB of space between the two of them. The free space is somewhere in the 800-900 GB range before the machine started having problems. Windows keeps saying that there is only 900 MB of free space, which is not enough to install windows. Laughable. There is a ton of free space on those drives, and there is an existing XP installation, albiet one that doesn't work.
View 3 Replies
View Related
May 15, 2007
i'm using window's xp. whenever i start my i-tunes program, i get an error message telling me "i-tunes has detected a problem with your audio configuration. audio/video lpayback may not work properly." at this point, i no songs will play, and the sound doesn't come through the speakers when i'm watching any videos on the web either. Every once and a while, my monitor will flicker, then power down, leaving me with no choice but to manually shut the pc down. in addition, the desktop and browser graphics have begun to deteriorate. they almost look like somethign from windows 95. i have no idea where to start,
View 14 Replies
View Related
Sep 13, 2008
can i use windows XP pro to repair a windows xp MCE edition?
View 3 Replies
View Related
Apr 1, 2007
Every time i turn of the computer i get a message saying explorer.exe is not responding and i have to end the program manually # click on end program now. What is the cause of this and can i fix it? I am running windows XP
View 3 Replies
View Related
Jan 1, 2008
I have a new laptop that came with Windows Vista. I have been trying to load it with Windows XP because Windows Vista didnt work. I am pretty sure a format and clean install will wreck my warranty, hence the dual boot. So far, I have been able to partition and install XP SP-2 to a partition. I've booted into XP fine but my Vista partition is not available. I think that the partition table or MBR has been corrupted.
So to repair this, what I did was boot up from the Vista recovery DVD and run the 'startup repair' option to reload the bootloader for Vista and thus, enable dual booting. When I rebooted I got a black screen saying 'Invalid Partition Table' or something to this effect. I tried repairing the MBR and so on and so forth from the console on the recovery DVD but this proved to be pretty much totally fruitless. So I went through and did an install of Windows XP once again, to my other drive partition I had created. So I am basically where I started.
View 1 Replies
View Related
Nov 16, 2005
Dell Dimension 4300 crashed on me. (I got the "Strike F1 key to continue, F2 to run the setup utility" message).I changed the order to the disk drive under the setup utility and was able to get it to recognize the Windows XP Install CD but that's where I'm unsure what to do. It gives me the option to either set up Windows or repair using Recovery Console.If I reinstall will I lose all the files on my computer? I have photos of my first born on there that I don't want to lose!
View 17 Replies
View Related
Jul 1, 2010
After a problem running Partition magic, which crashed part way through, a lot of my windows components no longer seem to work. This includes the Windows installer and Windows firewall as well as my Mcaffe security software. I think it was the latter that told me I needed to reload Java - but couldn't do that as windows installer is not working.
So I decided to repair windows by loading over the top. I had a problem at the end which seemed to be resolved by / CHKDSK R . However now it loads through to my login and then when I enter my password it says soemthing like - This copy of windows must be activated with Microsoft before you can log on. Do you want to activate Windows now? If I say no it closes the system down. If I say yes it just hangs on the teletubbies screen, without loading any apps.
View 14 Replies
View Related
Jan 25, 2007
I don't know what happen to the windows auth. I need it to repair windows.
View 7 Replies
View Related
Mar 31, 2006
when i turned my on my pc everything was fine, i update and ran "ad-awareSE" to check my pc, it remove 3 files, finished.
then i launch "disk clean up" which is provided my windows orignally, to clean up my pc, i select everything on the list and i click ok so it would start removing the files, but then something strange happened.
as 'disk clean up' starts cleaning my system i noticed it's taking alot longer than usual, then all of a sudden a horrifying message pops up:
warning: system files found in windows have been change or have been replace by an unknown source, current system files are unstable and will cause stability issues, please insert "WINDOWS XP installation cd" into a cd rom drive, set up will fresh replace current files with ones from windows xp cd.-----
i click cancel and it warns me that my system will become unstable, no more warning message have pop up UNTIL i launch "disk clean up" again, i once again select everything in the list and click ok so it could began cleaning my system.
then the same message pops up again.
i decided to do what it tells me, i took out my windows XP SP2 cd, put it in the cd rom drive, and soon windows start reading the cd WHILE disk clean up starts cleaning my system.
there's no message telling me that windows is repairing my system files, all i see is "disc clean up" cleaning my pc AND AT THE SAME TIME my cd rom drive is reading my winXP cd.
after it's all over, i tdidn't tell me to restart my pc, but i did anyway and after that i ran 'disk clean up' and i didn't notice anything strange in windows, i ran 'disk clean up' again, and there was no more warning message, i ran disk cleanup for a few more times and everything was ok.
i first thought maybe it was because of a hacker attacking my pc and messing up my system files, but that's not possible becasue i activated "block traffic" in norton firewall 2005, plus i already updated norton antivirius 2005 with the latest definition, and use ad-aware to remove all tracs of spyware, so really, what what happen back then, what's wrong with my pc?
how can i solve this?
View 3 Replies
View Related
May 1, 2009
After a PSU failed and took my motherboard with it, I decided to build a new system and move my hard drive. Of course XP wouldn't boot. Since I didn't have an XP disc on hand (old system came with XP preloaded), I purchased Vista figuring I might be able to do an in-place upgrade (i could use 64-bit anyways). This didn't work as the Vista upgrade demanded to be started from within windows. I downloaded a clean version of XP w/ bittorrent and attempted a repair install. This seemed to go fine until setup restarted to complete the installation. Now XP restarts automatically on the loading screen and if I start in safe mode, I get the message "Windows XP Setup cannot run under Safemode."
View 4 Replies
View Related
Dec 17, 2008
I right clicked on the internet connection symbol, chose repair, after that the small panel appears persistently, I cannot close it. My windows is still running, I open tasks management, but dont know where the resource for that panel.
View 4 Replies
View Related
Aug 22, 2007
Did a repair install, everything is working except windows updates, it says I have updates and I can click on custom and it shows them when I click to install them it acts like it will then a box comes up and say they all failed. I turned off auto updates and went to the site and click on custom and they came up but the same thing won't install did it with express install to and its the same,. Any one know what could be wring, one update it needs is the windows validation update I know the disk is valid it came with the machine and it retook the product number when I did the repair install.
View 1 Replies
View Related
Feb 11, 2008
When I turn on my computer, I get the following message:
"We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.
If your computer stopped responding, restarted unexpectedly, or was automatically shut down to protect your files and folders, choose Last Known Good Configuration to revert to the most recent settings that worked.
If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button was pressed, or if you aren't sure what caused the problem, choose Start Windows Normally.
View 14 Replies
View Related
Feb 11, 2008
When I turn on my computer, I get the following message:
"We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.
If your computer stopped responding, restarted unexpectedly, or was automatically shut down to protect your files and folders, choose Last Known Good Configuration to revert to the most recent settings that worked.
If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button was pressed, or if you aren't sure what caused the problem, choose Start Windows Normally.
View 2 Replies
View Related
Apr 28, 2005
I want to know how to repair windows installation without losing ANY files.
View 5 Replies
View Related
Apr 9, 2007
i have recently been experiencing that notorious "ehshell.exe" error while attempting to use Media Center. I got an OS disk from dell but i am unsure of how to repair my system.I inserted the disk, clicked on Install Windows XP and selected the upgrade option, but all this did was give me system a Windows XP Pro option at start up.this is really giving me a problem. apparently now i have 2 Operating systems on my computer.
View 4 Replies
View Related
Jul 27, 2007
This isn't my machine it belongs to my grandpa. It has XP SP2 on it. It loads just past cmos screen then reboots itself. no message or nothing. Try run windows normally doesn't work. Try run safe mode with network support NOPE.
View 12 Replies
View Related
Feb 6, 2008
how would you determine if you're MBR is corrupted? Here is the situation: The user boots up his Windows XP Pro SP2 machine, it does the normal POST and gets to the splash screen, however, it seems after that it will display a standard "Microsoft Apologizes but Windows did not boot properly... please select from one of the options..."
When this comes up, we attempt to launch windows into Safe Mode. It runs displays the some messages (more on the lines of what seems to be in the autoexec.bat file) but suddenly the PC reboots. It does the POST again and then the splash screen then bam same message as above. So we try the Last Known Good Configuration option but it does the same thing. Reboots the PC and gets to that screen.
View 6 Replies
View Related
Oct 18, 2009
I have windows xp and i want to play a game but everytime i try to install it it says that it does not support windows NT and I have tried everything your site has said and nothing works! What can I do?
View 1 Replies
View Related
Sep 13, 2005
I installed Windows XP Pro over my Windows XP home a few days ago. My Windows XP Pro seemed to be working fine except it didn't feel or acknowledge my built in speakers and various other hardware. My dad said this might stem from the fact that the Windows I have (being from 2001) is older than my laptop. He suggested I DL the service pack onto on desktop computer, put it on a disk and open it on my laptop and install. I did that, and everything seemed to go fine until I restarted my PC as I usually do when I install new software. My laptop told there had a been a error that Windows was failing to boot properly due to some failed installation of software or failed hardware installation. It had a few options like "start with the last known configuration of windows that worked on your computer" so I did that. And I tried the other options too. But after a few screens of the usual booting up stuff my laptop just goes to a black screen and I can't get away from it. Windows Support won't help me so I'm asking you guys.
View 3 Replies
View Related
Feb 19, 2008
I have a Gateway laptop that won't boot up properly. Sometimes it will go to the Windows screen that has the bar at the bottom like it is loading and then it will just restart. But here lately it has been just going to the screen that asks if you want to start in safe mode and all the other choices. But it just locks up and won't go from there. I think that my hard drive is messed up. I just ordered a new hdd. Can I just change the hdd to fix it or is it something else?
View 2 Replies
View Related
Jun 13, 2008
i have a computer that i recently installed windows xp on. I shut the computer down for the first time after installing windows that was all good but then when i started it up the next morning it wouldn't work.it gets half way through loading windows then flashes blue and restarts.after it restarts it gives me the screen were it says:start windows normally start windows safe mode etc it will start in safe mode then i can start it normally after restarting it but i would like it just to boot up the first time
View 6 Replies
View Related
