Repair Or Reinstall Windows?
Nov 16, 2005
Dell Dimension 4300 crashed on me. (I got the "Strike F1 key to continue, F2 to run the setup utility" message).I changed the order to the disk drive under the setup utility and was able to get it to recognize the Windows XP Install CD but that's where I'm unsure what to do. It gives me the option to either set up Windows or repair using Recovery Console.If I reinstall will I lose all the files on my computer? I have photos of my first born on there that I don't want to lose!
View 17 Replies
ADVERTISEMENT
Feb 11, 2008
When I turn on my computer, I get the following message:
"We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.
If your computer stopped responding, restarted unexpectedly, or was automatically shut down to protect your files and folders, choose Last Known Good Configuration to revert to the most recent settings that worked.
If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button was pressed, or if you aren't sure what caused the problem, choose Start Windows Normally.
View 14 Replies
View Related
Feb 11, 2008
When I turn on my computer, I get the following message:
"We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.
If your computer stopped responding, restarted unexpectedly, or was automatically shut down to protect your files and folders, choose Last Known Good Configuration to revert to the most recent settings that worked.
If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button was pressed, or if you aren't sure what caused the problem, choose Start Windows Normally.
View 2 Replies
View Related
Jul 23, 2005
My Help and Support stopped working about the same time I installed the free utility GhostScript / Gsview so that I could view postscript files. I tried posting a question on another usenet newsgroup, but the answer of: click on install on the C:windowsinfpchealth.inf file - resulted in a search for the file dataspec.xml in the C:windowsinfi386 directory - Unfortunately, such directory does not exist on my C: drive. Furthermore, the "K:I386" directory of my Original Win XP Home CD does not contain any file named "dataspec.xm_ or .xml".And beyond that, I ordered a new Win XP SP2 CD, which just now arrived by mail - and there is no "K:I386" directory on that CD, nor does the CD apparently contain any file called "dataspec" (including dataspec.*).Another effort toward resolution occurred via another usenet post I read, which suggested opening the XP command line feature and executing a system status command, that displayed enabled services - I used that method, and switched the Help and Support service off and then on again. Such action did not in-fact enable the Help feature (including, of course restart), despite the indication that the Help and Support service was enabled. I am, and have been, running a purchased-CD version of Win XP Home, with a downloaded SP2 revision (I have not installed the new Win XP SP2 CD). Basically, I want to find out the means and methods for enabling my Win XP SP2 Help and Support feature, that apparently has been disabled or otherwise rendered inoperative.Is a reinstall of Win XP possible and the best choice? What are the other options?
View 2 Replies
View Related
Mar 30, 2005
XP Home, SP2.My XP screensaver motion has become bad. It moves in a jerky, sputtering way and has been doing so for months. Also it will only operate at one speed - slow - regardless of what speed it's set. Is there a way to repair the screensaver program, can I uninstall/reinstall? If so, how? If an XP disc is needed, what I have is the reinstall disc from Dell, which I have never used.(I'm talking about XP's own system screensaver display - I didn't download anything.)
View 6 Replies
View Related
Jan 30, 2007
I recently overwrit a version of windows. It did not save settings and files for programs that are integral with windows. When I want to use Yahoo or other programs that require integration from windows I get warning messages. I want to just start from scratch. (all programs and apps are on the hard drive and accessable from explorer) is there a function that allows me to format and remove all info except windows? Otherwise I have to reinstall/repair all programs
View 7 Replies
View Related
Aug 19, 2007
My comp is acting weird so i decided to either repair windows or reinstall windows, but after it says press any key to boot from cd, and i press a key, i get a blank screen or it loads windows.
View 14 Replies
View Related
Jan 25, 2005
Is there a way I can update from Windows 2000 Pro to Windows XP Pro without having to reinstall my programs and backup/reinstall all of my files? Is it safe to just update like this?
View 6 Replies
View Related
Sep 13, 2008
can i use windows XP pro to repair a windows xp MCE edition?
View 3 Replies
View Related
Jul 1, 2010
After a problem running Partition magic, which crashed part way through, a lot of my windows components no longer seem to work. This includes the Windows installer and Windows firewall as well as my Mcaffe security software. I think it was the latter that told me I needed to reload Java - but couldn't do that as windows installer is not working.
So I decided to repair windows by loading over the top. I had a problem at the end which seemed to be resolved by / CHKDSK R . However now it loads through to my login and then when I enter my password it says soemthing like - This copy of windows must be activated with Microsoft before you can log on. Do you want to activate Windows now? If I say no it closes the system down. If I say yes it just hangs on the teletubbies screen, without loading any apps.
View 14 Replies
View Related
Jan 25, 2007
I don't know what happen to the windows auth. I need it to repair windows.
View 7 Replies
View Related
Jun 10, 2005
I have a friend who has a pentium 2 350 which is currently running on Windows 98SE...yikes!My friend has been complaining that their computer has been running slow and that pop ups are appearing everywhere. I told them that it sounds like their computer has been hijacked and that I would recommend that they format their computer and start from fresh.I want to format their computer and install a newer windows OS (perhaps windows xp) and install a couple of spyware/antivirus programs.
View 7 Replies
View Related
Mar 31, 2006
when i turned my on my pc everything was fine, i update and ran "ad-awareSE" to check my pc, it remove 3 files, finished.
then i launch "disk clean up" which is provided my windows orignally, to clean up my pc, i select everything on the list and i click ok so it would start removing the files, but then something strange happened.
as 'disk clean up' starts cleaning my system i noticed it's taking alot longer than usual, then all of a sudden a horrifying message pops up:
warning: system files found in windows have been change or have been replace by an unknown source, current system files are unstable and will cause stability issues, please insert "WINDOWS XP installation cd" into a cd rom drive, set up will fresh replace current files with ones from windows xp cd.-----
i click cancel and it warns me that my system will become unstable, no more warning message have pop up UNTIL i launch "disk clean up" again, i once again select everything in the list and click ok so it could began cleaning my system.
then the same message pops up again.
i decided to do what it tells me, i took out my windows XP SP2 cd, put it in the cd rom drive, and soon windows start reading the cd WHILE disk clean up starts cleaning my system.
there's no message telling me that windows is repairing my system files, all i see is "disc clean up" cleaning my pc AND AT THE SAME TIME my cd rom drive is reading my winXP cd.
after it's all over, i tdidn't tell me to restart my pc, but i did anyway and after that i ran 'disk clean up' and i didn't notice anything strange in windows, i ran 'disk clean up' again, and there was no more warning message, i ran disk cleanup for a few more times and everything was ok.
i first thought maybe it was because of a hacker attacking my pc and messing up my system files, but that's not possible becasue i activated "block traffic" in norton firewall 2005, plus i already updated norton antivirius 2005 with the latest definition, and use ad-aware to remove all tracs of spyware, so really, what what happen back then, what's wrong with my pc?
how can i solve this?
View 3 Replies
View Related
May 1, 2009
After a PSU failed and took my motherboard with it, I decided to build a new system and move my hard drive. Of course XP wouldn't boot. Since I didn't have an XP disc on hand (old system came with XP preloaded), I purchased Vista figuring I might be able to do an in-place upgrade (i could use 64-bit anyways). This didn't work as the Vista upgrade demanded to be started from within windows. I downloaded a clean version of XP w/ bittorrent and attempted a repair install. This seemed to go fine until setup restarted to complete the installation. Now XP restarts automatically on the loading screen and if I start in safe mode, I get the message "Windows XP Setup cannot run under Safemode."
View 4 Replies
View Related
Dec 17, 2008
I right clicked on the internet connection symbol, chose repair, after that the small panel appears persistently, I cannot close it. My windows is still running, I open tasks management, but dont know where the resource for that panel.
View 4 Replies
View Related
Aug 22, 2007
Did a repair install, everything is working except windows updates, it says I have updates and I can click on custom and it shows them when I click to install them it acts like it will then a box comes up and say they all failed. I turned off auto updates and went to the site and click on custom and they came up but the same thing won't install did it with express install to and its the same,. Any one know what could be wring, one update it needs is the windows validation update I know the disk is valid it came with the machine and it retook the product number when I did the repair install.
View 1 Replies
View Related
May 1, 2010
I want to repair my windows cause I doesn't boot up properly..I hve followed instructions but when I put cd in it takes mr to set up windows n asking mr to select partition..so I select my current system drive n it is asking mr to press c to continue setup using this partition..N then it ask me to format or leave current file system intact..am I doing something wrong, how come I don't have the repair windows xp option like it shows on the user guide?
View 2 Replies
View Related
Apr 28, 2005
I want to know how to repair windows installation without losing ANY files.
View 5 Replies
View Related
Apr 9, 2007
i have recently been experiencing that notorious "ehshell.exe" error while attempting to use Media Center. I got an OS disk from dell but i am unsure of how to repair my system.I inserted the disk, clicked on Install Windows XP and selected the upgrade option, but all this did was give me system a Windows XP Pro option at start up.this is really giving me a problem. apparently now i have 2 Operating systems on my computer.
View 4 Replies
View Related
Jan 12, 2005
I had to reformat and reinstall windows due to a virus . now since I have done that I am back to getting those bloody windows popups . can someone tell me how to stop them again ???
View 2 Replies
View Related
Jul 5, 2006
I turned my laptop on the other day, and when it comes to the Windows XP loading screen (where it says Windows XP and has the little blue statuts bar) it freezes. Every single time, I've tried over and over again, but it always freezes there and I can't get past it.I want to try everything else that I can before I take the big step to formatting the drive and reinstalling Windows, as it has all of my work on and everything is set up on there.
View 7 Replies
View Related
Jul 27, 2007
First off, i have a 60gb ide drive for my windows installation (3 other drives for storage), and i got a 150gb Raptor X, which is sata. I cloned the 60gb boot drive onto the raptor, but it didnt boot, and said the HAL was corrupt. My guess would be that the hardware abstraction layer got all defunct when it saw the new sata drive, but was expecting an ide? After all that, i decided to run a chkdsk on the ide drive, and clone it again, to see if it booted. I used the recovery console on a windows xp pro disc, but alas, i couldnt chkdsk because i forgot my admin password. Stupid me.
View 8 Replies
View Related
Dec 20, 2007
Problem: Cannot Reinstall Windows > Put Master CD in, loads files, then says "Setup did not find any hard disk drives installed on your computer" .BIOS does recognize the hardrive as hitachi 160 GB SATA hardrive and SATA is enabled.Windows Setup disk does not recognize hardrive.I have tried F6 during Windows Setup to load controller drivers but screen says "File iaStor.sys could not be loaded. Error Code is 14."Hardrive seems to work properly becuase I can load windows and do any non-network function.My Reason for ReinstallationRecently messed up my registries accidently concerning installation and uninstallation of AOL and no longer have networking LAN or wireless functions. So for me, "Reformat time." I wanted a clean install anyways. No other hardrives are present, nor are there any other partitions. Currently doing DiskCheck (stage 4 of 5) but so far the disk is not damaged and is normal.My Windows Setup Disk is official and I have tested other Windows setup disks with my laptop but none work.
View 6 Replies
View Related
Mar 15, 2006
My computer is in real need of a reformat and I have an OEM version of Windows XP Home. Will I be able to reformat and reinstall windows using it? I've heard that you can only do that with retail.
View 4 Replies
View Related
Sep 1, 2010
I have a very screwed up Win XP computer and am trying to reinstall XP from the CD. I changed the boot order to boot from CD and everything goes fine, files load etc. It asks a few questions during the loading which I answer and all goes fine. Then after it loads the files it finally asks 'are you sure you want to proceed' but at that point everything USB fails including the keyboard, so I can't tell it Yes to proceed. There is no other port to plug in an input device other than the 6 usb ports. Is there a way to get around this?
View 11 Replies
View Related
Oct 27, 2005
my system is running SLOOOW and it's annoying me. I think it's about time that I reinstall windows and, since my HD has become quiet noisy lately, I've been thinking that maybe I should kill two birds with one stone and replace my HD at the same time. I recently purchased a big external USB HD. I have the Windows CD that came with my Dell notebook, but I've never reinstalled windows. I don't want someone to walk me through the entire process...what I would really appreciate though is some suggestions re: the best way to go about backing up/recovering my settings and etc.I don't really care about most of the programs and etc. (except my anti-virus program whihc I paid for).
View 6 Replies
View Related
Sep 24, 2009
I have a Dell Inspiron 5100. Its sevice tag # is H65WK31. It's been running really slowly and had a bunch of stuff on it. When I tried to dfragment and stuff it shut down. In the end, I decided to just strip the hard drive and reinstall Windows XP (which is what it had.) The reinstallation went surprisingly well since I don't know the first thing about computers. At first it wouldn't play sounds or let me add or update Adobe flash or anything. I went into Device manager and found yellow exclamation points beside several thing and updated drivers and that fixed everything except beside Other Devices, it has the yellow exclamation mark. Underneath that, it says Video Controller (VGA compatible) and has a yellow exclamation mark beside it. It won't let me update the drivers. It says "The hardware was not installed because the wizard cannot find the necessary software." I have a CD that I may or may not have come with this DELL (I have several over the years.) It says it's from ATI. I tried to put it in and go through the cd to update the drivers. I get a message that says the same thing. When I got my computer, it seems like I had an upgrade on the video card, but all that was done before my computer left the factory. As it stands, I have a picture, but it looks like I'm in safe mode.
View 11 Replies
View Related
Sep 1, 2005
windows messenger wont open. i think i disabled it a while back. when i click the shortcut nothing happens. i went to the messenger folder and click the .exe file but had the same results.
hope there is a way to reinstall it because i need it now.
View 1 Replies
View Related
Apr 16, 2008
I had to reinstall windows after a virus took out all of the essential .dll files and the computer wouldn't start up, I now have a problem with some of my hardware not working. When I go into device manager the following have yellow question marks beside them:
ethernet controller
multimedia audio controller
video controller (VGA compatible).
The computer itself is an XC cube edition (not sure if that's a brand or not). It was supplied for a disabled student if that helps? It runs windows XP service pack 2.
View 6 Replies
View Related
Jul 26, 2010
Hello, how do you reinstall windows root system32 ntoskrnl exe with out the disk or a disk drive?
View 1 Replies
View Related
Jun 28, 2006
When I try to boot my computer it says:"Windows could not start because the following file is missing or corrupt:<Windows root>system32hal.dll. Please re-install a copy of the above file." I tried to boot my computer with the OS cd and got nothing.
View 1 Replies
View Related
