Unable To Perform System Restore On External Hard Disk?
Sep 21, 2008
I have an external hard drive that I have assigned it a permanent hard drive letter reference through Disk Management. I have set the System Restore tab in My Computer Properties tab to not moniter this external hard drive K. Problem is that every now and then when I plug in every now and then for backing up my files via Briefcase - this will activate the System Restore function on that hard drive. This usually happens when I have the hard drive plugged in when I either turn off or turn on my computer. I stopped having the hard drive plugged in to hopefully stop the stop the System Restore on that hard drive (and then re-checked the System Restore tab)
View 12 Replies
ADVERTISEMENT
Nov 13, 2008
I need to restore my computer to an earlier date, but when i tried to find the system restore, it was not there. First i went to start, all programs, accessories, and system tools. When i saw that it was not there, i entered the run command for it. When i did that, i got the same message you would get if you enter an invalid command. After that didn't work, i entered "msconfig" in the run box, and then once the system configuration utility appeared, i went to the tools tab and highlighted System Restore, and clicked Launch. But then a window popped up saying the following: "The system cannot find the file specified".
I am about 75-85% sure that the rstrui.exe file was deleted by one of the young ones fiddling around inside the system folders. What i do not know is how to get it back. I remember one time when the windows sound recorder executable file had gotten deleted, i just downloaded it from the internet, put it in the right spot and it was fixed. I can't seem to do that with the system restore executable file. Any ideas on how i can fix this?
View 6 Replies
View Related
Mar 27, 2010
I've had my HP computer for quite some time (5 years at least), still runs great and all. But here recently my harddrive crashed when trying to do something (still using that harddrive), when I tried to use the system restore feature from HP,it wouldn't let me, so I had to get a WindowsXP disc from someone. Using their copy of windows won't let me update windows or anything, so I decided I would just system restore using HP's system restore. (Format and reinstall my windows), but when I hit the F10 at bootup, it does nothing
View 12 Replies
View Related
Jan 12, 2005
I've tried unsuccessfully to restore my windows xp to a prior date, following the tutorial, with the response: "your system was unable to be restored to the prior date."
View 7 Replies
View Related
Apr 25, 2008
Plugged my external LaCie HDD in to my PC, as I always do and I had an SVCHOST.exe worm, apparently.. Which was healed by my AVG. Dunno how the hell I had a virus on my ext HDD in the first place. Now, when i try and access by ext HDD by double clicking its icon in "My Computer", I get the "Open With..." dialogue box. I can only browse my files by right-clicking and selecting "Explore".. Everything seems normal on the disk.
View 11 Replies
View Related
Apr 28, 2006
I am on the road and trying to do a system restore. I use an external hard drive in my office but I do not have the external hard drive with me now. I can not get the restore to complete and I can not get the undo to fully complete. Is this not working fully because I am not hooked up to my external hard drive? When I initiated the restore it asked something about the external hard drive.
View 3 Replies
View Related
Mar 1, 2008
I connected a 10GB HDD with Windows 2000 on it to a Windows XP machine using a USB 2.0 external drive enclosure. Apparently, I connected the HDD enclosure to a USB 1.1 port and XP advised me I could get better performance by connecting it to a USB 2.0 port.After some time, XP reported an error indicating it couldn't save E:$Mft (E: is the drive letter assigned to the external enclosure) due to a lazy write problem.I disconnected the external drive enclosure from the system and put it back in the laptop and when I boot the machine, it displays the "starting windows" screen, the progress bar goes to the end, and the machine reboots itself.
View 4 Replies
View Related
Mar 4, 2007
It was fine til her son installed some regular computer games you buy in a store. Then suddenly when she double clicked her desktop icons to open them instead of opening a program they would create a shortcut on the desktop though duplicating her icons. Also her mouse was making her text smaller and bigger without her having it do so. She also told me that when she was in firefox it would suddenly open up many tabs without her asking it to of the same thing. She tried to do a system restore to an earlier time but it wouldnt even let her go to the calendar to pick a date. She called me to find out if I knew anything. I got her to boot her computer in Safe Mode and run a virus scan which found nothing. To me it sounds like some sort of malware or spyware but not sure. Do you have any ideas other then reformatting the pc which is what I think her husband will end up doing unless I can find another answer.
View 2 Replies
View Related
Dec 29, 2006
An external hard drive. When it is on & I try to boot,I get the following error : Invalid system disk Replace the disk, and then press any key I then have to turn off the external & press any key to get it to boot. Is there a way that I can boot with that external turned on. Some setting I need to change perhaps? I have an E-Machines computer about 2 years old.
View 6 Replies
View Related
Jan 8, 2009
I am cloning my existing hard drive in my laptop (sata) to an external hard drive (pata) in preparation for installing a new larger hard drive (sata)in the laptop. Can I, or how do I transfer the cloned data from the external (pata) to the new internal hard drive (sata)? Thanks in advance and I apoligize if this is a rudimentary question as this is my first time attempting something like this.
View 6 Replies
View Related
Nov 9, 2006
I have been using a Compaq Deskpro with Windows XP SP2. And then I sold that computer and bought a Compaq Evo. I then inserted the same harddrive but it is failing to boot. When I insert the installation disc it says "Press any key to boot from CD". Pressing keys does not activate anything and it stays on the same screen. I then created 6 set up disks and they all work perfectly loading drivers etc. The problem starts when I reach the stage where it says "insert Win XP SP2 installation disc and press any key when ready". Pressing the keyboard keys produces no response
View 7 Replies
View Related
Dec 21, 2009
My 500GB External HDD is not accessible anymore. It was working yesterday when i used it with windows 7. It automatically ran the disk check on that system and it worked. When i plugged into the USB of my XP laptop and double clicked the drive in My Computer the following error message appeared: D: is not accessible. The file or directory is corrupted or unreadable. The drive letter shows on My Computer and Disk Management.
View 8 Replies
View Related
Jul 2, 2005
I have two computers (a PC and a Mac) and a Maxtor One Touch External Hard disk 250 GB. I would like to back up these two machines using a single external hard disk. So I have partitioned the hard disk into two and have NTFS and FAT32 as the file systems. The NTFS partition is around 163 GB and the FAT32 is around 75GB. I could successfully back up the PC into the NTFS part but have problems with the Mac.
When the hard disk is mounted on to the Mac, both the partitions appear on the desktop. The Mac OS is 10.3 and it identifies both partition correctly. It recognises the NTFS part as readonly and FAT32 part as "readable and writable". But when I tried to backup for the first time there was an error saying "insert a new disk". I tried to overwrite the contents of the FAT32 part as I didn’t need them any longer hence asked to proceed with the backup. The Mac started erasing. I thought it was erasing the files previously present in the FAT32 part but it continued erasing for some time and finally erased the FAT32 file system itself. So the icon representing the FAT32 part of the partition of the external hard disk disappeared from the Mac’s desktop......
View 7 Replies
View Related
Apr 1, 2007
I have an interesting problem that shouldn't be too hard for you guys.I have three external hard-disks connected through a USB-HUB with my WinXP computer.Never had any problems whatsoever. The other day (that is, today) one of the disks didn't show up in 'My Computer'.So I did a right-click on my-computer-->manage-->disk management, like we all would do if a disk doesn't show up.The bar was there but it sayd 'Unallocated' or something like that if I recall.Basicly, it didn't have a drive letter assigned to it wich is pretty weird. Through some magic (that I don't quite remember), I got a drive letter assigned to it.It shows up in 'My Computer', so problem solved is what I thought Not even close.
View 14 Replies
View Related
Jun 28, 2005
I have 2 internal IDE HDD's and an external IcyBox USB2 self powered enclosure with a Maxtor 160GB 7200RPM HDD in it. The external HDD is divided into 4x40GB partitions.
Running CHECKDSK on the internal drives is no problem but when I try it on a partition on the external one it goes through Phase1, Phase 2, sometimes reaches Phase 3 then hangs and if left PC switches off. Second time it hung looked at Performance tab in Task Manager and CPU was at 100% and I could hear CPU fan revving up, obviously CPU was overheating and shutting down.Looking in Event Viewer there are a large number of disk errors. Properties says: "The device,DeviceHarddisk2D, has a bad block".Clicking on the MS link tells me:the disk itself failing or the electronics on the IcyBox
enclosure, the data on the disk is accessible and readable? Are there any known problems with this type of external HDD? The problem only came to light when I tried to merge partitions on external HDD using Partition Magic and it couldn't be done because of errors.
View 3 Replies
View Related
Oct 21, 2008
I have a Computer which operates on XP Service Pack 2 and has a Maxtor 1TB external Hard Drive hooked up. We do a lot of Video Editing (programs such as DV Storm, Vegas etc.) and up until yesterday the external came up as Local Disk E, but it became unplugged whilst the Editing programs were running.It now it comes up as Local Disk (I) but the problem is the Edit programs doesn't recognise any of the files (avi., mpg etc.) that are on the drive (comes up as 'invalid path'), and nor does it show them in their previous format.
View 4 Replies
View Related
Jan 30, 2007
both my externals are perfectly fine....they work on my other computer. Originally when i plugged them into my laptop the Found New Hardware wizard would startup, but be unable to do anything.
View 5 Replies
View Related
Feb 25, 2005
I have Win XP Pro SP2 I also have an external Lacie 250GB hard disk I want to store my Virtual PC files on. But, it is formatted at FAT32 and I can't put a file on there that is over 4GB. So, I tried to convert the drive to NTFS, but Windows won't let me do this. It keeps telling me the disk is dirty and to run chkdsk / f. Which I have done and completes fine finding no problems on the drive. Yet convert e: /fs:NTFS still does not convert the drive reporting it is dirty. What is causing this and how do I fix it? I have tons of data on the drive so I can't re-partition it as I don't want to loose that data. I need to convert it to NTFS.
View 6 Replies
View Related
Aug 2, 2008
Well I have an hard drive into a external enclousure but the windows XP of a new CPU do not finish detect it when I connect it. But the same external hard drive work fine in my laptop. I formated my CPU 2 times, but i got the same error of Windows. My CPU has a new motherboard Foxconn M7VMX-K.
The USB ports work fine with my pendrive.
In my computer i can see a new hard drive with a letter (K, whithout data.
The Windows XP Administrator Disk doesn't show nothing about the external hard drive.
View 6 Replies
View Related
Nov 19, 2006
Last night I connected a friend's HDD to my PC so he could back-up some files onto my PC before he formatted his.He did that,and then insisted that he needed to format it ASAP,so he did so using my cables.So I turn my PC on later I find that most of the contents of my desktop are missing,and that several Apps are as well.I look in C:Documents and Settings and notice a new profile called "TEMP" alongside my normal profile with many of My Documents and personal settings for apps. For some reason, my PC loads up this TEMP profile only now, as opposed to my normal one.
View 10 Replies
View Related
Aug 5, 2007
I have an EXTERNAL HD. I formatted it in FAT a few months ago. Ever since then, my laptop PC was unable to recognize the unit, but the Mac (which is not working right now, unfortunately) never had a problem with it. When I connect it to my laptop PC via USB, the USB icon shows up and the "USB Mass Storage Device Properties" says the "device is working properly." But the folder doesn't show up in My Computer, and diskmgmt.msc says the device is "Unallocated." Hopefully that doesn't mean the unit crashed because I have some stuff on there.Without losing the data (that should be on it, unless it crashed), I want to convert this thing to NTFS. I did some Google searching, but the instructions on how to do this (they say use convert.exe) aren't working. Moreover, no one mentioned how to convert an External, secondary HD.
View 11 Replies
View Related
Jan 19, 2007
I've been trying to reformat the drive and reinstall windows xp. I've done everything. The original problem was as follows: i rebooted with the cd and chose install xp (option 1.) Then it displays all of the available drives to format and install. Only my external hard drive (maxtor onetouch 300gb) was being displayed. I scrolled down but there were no more, and when I hit the up key i get a blue screen of death (with no error, message only "stop 000x00 or whatever
View 10 Replies
View Related
Apr 11, 2010
I have a very tired samsung X20 laptop. It has: 1.7 ghz, 2 gig ram, 250 gig western digital hard drive WD2500BEVE - with IDE type connection. Windows xp home with sp3.All has been rosey untill the connection where hard drive is placed onto the motherboard was broken. Not a problem I though as I have an enclosure to put the drive in then connect using the usb. All wired up I turned the computer on, nothing in the drive bay and the same hard drive in the enclosure connected via usb.
View 12 Replies
View Related
Jul 4, 2008
I just installed windows service pack 3 and now I'm having trouble with my external hard drive. when I go to My Computer, and click on it, it says it can't be accessed because of an I/O error. It's a Western Digital MyBook.
View 10 Replies
View Related
Mar 5, 2008
I have followed the wizard for system restore but having set the date and pressed next nothing appears to happen. How long should it take? I have tried this in safe mode as well
View 1 Replies
View Related
Feb 28, 2008
If I want to attach second hard disk with the same configuration of master hard disk, then system doesn't show second hard disk altogether or new hard disk begin to malfunction. Such as suddenly begin to give sounds like TICK, TICK TICK. Suddenly vanishes from the 'MY COMPUTER' drives. Suddenly denies to copy paste functions. BIOS shows both SATA drives. But Win XP doesn't load or simply hangs while starting up [booting up]. It happens when I attach second SATA drive with system. If only one SATA is attached, then WIN XP boots normally.
View 3 Replies
View Related
Mar 18, 2006
I'm connecting a 30GB Travelstar Hard Drive via an external USB 2.0 case to my Thinkpad T40 with Windows XP (pro). Windows immediately recognized it. However, the hard drive does not show up under Windows Explorer. I can go into Device Manager, click on Disk Drives, and it does show the new drive there (along with my main hard drive, which is a 80 GB hard drive).
I cannot figure out how to make it show up in Windows Explorer with an Drive Letter assigned to it and thus, how to actually use it.
View 6 Replies
View Related
Jul 29, 2005
I recently downloaded some drivers as I was trying to install a new printer who's software would'nt load. This did'nt solve the problem. I decided to get a printer that I had had before, Brother DCP-110C as I knew this had worked well. I tried to install yesterday (28th July) but could'nt and my PC keeps switching itself off near the end of the installation. I then thought I would use System restore to go back to a happier time when I had the first Brother printer. previous saved point wont let me to restore
View 4 Replies
View Related
Feb 13, 2005
I am unable to acess any of my or XP's restore points. When I went to restore to an earlier date. All appeared to be going as it should. However, when I got to my profile a message window came up that said unable to restore to (chosen date/time) etc. I chose 3 other restore points over the last month, thinking it might be some recent problem, still a no go. Any help would be greatly appreciated? Is there a utility to use to check and see if there is something corrupted?
View 7 Replies
View Related
Apr 8, 2005
I'm trying to do a system restore without success. It goes through the motions but after it restarts always say "cannot use restore point, no changes have been made to your system". I'm trying to correct a font setting change that happened without my knowledge.
View 13 Replies
View Related
Sep 23, 2005
We had a power outage and now when you turn on the PC it gets as far as the XP screen, then quits and starts again. This will happen forever until you turn off the power button again. I put in the restore CD but when it says hit 1 or 2, regardless which I hit it gives me and A: prompt and says Bad Command.P.S. It's an emachines 2385, 512K, Celeron 2 Gig processor
View 13 Replies
View Related
