I just installed windows service pack 3 and now I'm having trouble with my external hard drive. when I go to My Computer, and click on it, it says it can't be accessed because of an I/O error. It's a Western Digital MyBook.
View 10 Replies
An external hard drive. When it is on & I try to boot,I get the following error : Invalid system disk Replace the disk, and then press any key I then have to turn off the external & press any key to get it to boot. Is there a way that I can boot with that external turned on. Some setting I need to change perhaps? I have an E-Machines computer about 2 years old.
View 6 Replies View RelatedI am cloning my existing hard drive in my laptop (sata) to an external hard drive (pata) in preparation for installing a new larger hard drive (sata)in the laptop. Can I, or how do I transfer the cloned data from the external (pata) to the new internal hard drive (sata)? Thanks in advance and I apoligize if this is a rudimentary question as this is my first time attempting something like this.
View 6 Replies View RelatedI am on the road and trying to do a system restore. I use an external hard drive in my office but I do not have the external hard drive with me now. I can not get the restore to complete and I can not get the undo to fully complete. Is this not working fully because I am not hooked up to my external hard drive? When I initiated the restore it asked something about the external hard drive.
View 3 Replies View RelatedMy 500GB External HDD is not accessible anymore. It was working yesterday when i used it with windows 7. It automatically ran the disk check on that system and it worked. When i plugged into the USB of my XP laptop and double clicked the drive in My Computer the following error message appeared: D: is not accessible. The file or directory is corrupted or unreadable. The drive letter shows on My Computer and Disk Management.
View 8 Replies View RelatedPlugged my external LaCie HDD in to my PC, as I always do and I had an SVCHOST.exe worm, apparently.. Which was healed by my AVG. Dunno how the hell I had a virus on my ext HDD in the first place. Now, when i try and access by ext HDD by double clicking its icon in "My Computer", I get the "Open With..." dialogue box. I can only browse my files by right-clicking and selecting "Explore".. Everything seems normal on the disk.
View 11 Replies View RelatedI have two computers (a PC and a Mac) and a Maxtor One Touch External Hard disk 250 GB. I would like to back up these two machines using a single external hard disk. So I have partitioned the hard disk into two and have NTFS and FAT32 as the file systems. The NTFS partition is around 163 GB and the FAT32 is around 75GB. I could successfully back up the PC into the NTFS part but have problems with the Mac.
When the hard disk is mounted on to the Mac, both the partitions appear on the desktop. The Mac OS is 10.3 and it identifies both partition correctly. It recognises the NTFS part as readonly and FAT32 part as "readable and writable". But when I tried to backup for the first time there was an error saying "insert a new disk". I tried to overwrite the contents of the FAT32 part as I didn’t need them any longer hence asked to proceed with the backup. The Mac started erasing. I thought it was erasing the files previously present in the FAT32 part but it continued erasing for some time and finally erased the FAT32 file system itself. So the icon representing the FAT32 part of the partition of the external hard disk disappeared from the Mac’s desktop......
I have an interesting problem that shouldn't be too hard for you guys.I have three external hard-disks connected through a USB-HUB with my WinXP computer.Never had any problems whatsoever. The other day (that is, today) one of the disks didn't show up in 'My Computer'.So I did a right-click on my-computer-->manage-->disk management, like we all would do if a disk doesn't show up.The bar was there but it sayd 'Unallocated' or something like that if I recall.Basicly, it didn't have a drive letter assigned to it wich is pretty weird. Through some magic (that I don't quite remember), I got a drive letter assigned to it.It shows up in 'My Computer', so problem solved is what I thought Not even close.
View 14 Replies View RelatedI have 2 internal IDE HDD's and an external IcyBox USB2 self powered enclosure with a Maxtor 160GB 7200RPM HDD in it. The external HDD is divided into 4x40GB partitions.
Running CHECKDSK on the internal drives is no problem but when I try it on a partition on the external one it goes through Phase1, Phase 2, sometimes reaches Phase 3 then hangs and if left PC switches off. Second time it hung looked at Performance tab in Task Manager and CPU was at 100% and I could hear CPU fan revving up, obviously CPU was overheating and shutting down.Looking in Event Viewer there are a large number of disk errors. Properties says: "The device,DeviceHarddisk2D, has a bad block".Clicking on the MS link tells me:the disk itself failing or the electronics on the IcyBox
enclosure, the data on the disk is accessible and readable? Are there any known problems with this type of external HDD? The problem only came to light when I tried to merge partitions on external HDD using Partition Magic and it couldn't be done because of errors.
I have a Computer which operates on XP Service Pack 2 and has a Maxtor 1TB external Hard Drive hooked up. We do a lot of Video Editing (programs such as DV Storm, Vegas etc.) and up until yesterday the external came up as Local Disk E, but it became unplugged whilst the Editing programs were running.It now it comes up as Local Disk (I) but the problem is the Edit programs doesn't recognise any of the files (avi., mpg etc.) that are on the drive (comes up as 'invalid path'), and nor does it show them in their previous format.
View 4 Replies View RelatedI have Win XP Pro SP2 I also have an external Lacie 250GB hard disk I want to store my Virtual PC files on. But, it is formatted at FAT32 and I can't put a file on there that is over 4GB. So, I tried to convert the drive to NTFS, but Windows won't let me do this. It keeps telling me the disk is dirty and to run chkdsk / f. Which I have done and completes fine finding no problems on the drive. Yet convert e: /fs:NTFS still does not convert the drive reporting it is dirty. What is causing this and how do I fix it? I have tons of data on the drive so I can't re-partition it as I don't want to loose that data. I need to convert it to NTFS.
View 6 Replies View RelatedWell I have an hard drive into a external enclousure but the windows XP of a new CPU do not finish detect it when I connect it. But the same external hard drive work fine in my laptop. I formated my CPU 2 times, but i got the same error of Windows. My CPU has a new motherboard Foxconn M7VMX-K.
The USB ports work fine with my pendrive.
In my computer i can see a new hard drive with a letter (K, whithout data.
The Windows XP Administrator Disk doesn't show nothing about the external hard drive.
Last night I connected a friend's HDD to my PC so he could back-up some files onto my PC before he formatted his.He did that,and then insisted that he needed to format it ASAP,so he did so using my cables.So I turn my PC on later I find that most of the contents of my desktop are missing,and that several Apps are as well.I look in C:Documents and Settings and notice a new profile called "TEMP" alongside my normal profile with many of My Documents and personal settings for apps. For some reason, my PC loads up this TEMP profile only now, as opposed to my normal one.
View 10 Replies View RelatedI have an EXTERNAL HD. I formatted it in FAT a few months ago. Ever since then, my laptop PC was unable to recognize the unit, but the Mac (which is not working right now, unfortunately) never had a problem with it. When I connect it to my laptop PC via USB, the USB icon shows up and the "USB Mass Storage Device Properties" says the "device is working properly." But the folder doesn't show up in My Computer, and diskmgmt.msc says the device is "Unallocated." Hopefully that doesn't mean the unit crashed because I have some stuff on there.Without losing the data (that should be on it, unless it crashed), I want to convert this thing to NTFS. I did some Google searching, but the instructions on how to do this (they say use convert.exe) aren't working. Moreover, no one mentioned how to convert an External, secondary HD.
View 11 Replies View RelatedI have an external hard drive that I have assigned it a permanent hard drive letter reference through Disk Management. I have set the System Restore tab in My Computer Properties tab to not moniter this external hard drive K. Problem is that every now and then when I plug in every now and then for backing up my files via Briefcase - this will activate the System Restore function on that hard drive. This usually happens when I have the hard drive plugged in when I either turn off or turn on my computer. I stopped having the hard drive plugged in to hopefully stop the stop the System Restore on that hard drive (and then re-checked the System Restore tab)
View 12 Replies View RelatedI connected a 10GB HDD with Windows 2000 on it to a Windows XP machine using a USB 2.0 external drive enclosure. Apparently, I connected the HDD enclosure to a USB 1.1 port and XP advised me I could get better performance by connecting it to a USB 2.0 port.After some time, XP reported an error indicating it couldn't save E:$Mft (E: is the drive letter assigned to the external enclosure) due to a lazy write problem.I disconnected the external drive enclosure from the system and put it back in the laptop and when I boot the machine, it displays the "starting windows" screen, the progress bar goes to the end, and the machine reboots itself.
View 4 Replies View RelatedMy problem is a result of a long series of attempts to fix a corrupt Windows registry file. A few days ago I booted my laptop and received a blue screen error: c0000218, relating to a corrupt Windows registry file. Windows could not load. After a lot of searching online I found a way to manually replace this and four other related files from the c:WindowsRepair folder using the command prompt.
This process seemed to work and Windows began to load. I then received a lsass.exe error saying something about invalid passwords. My laptop began an infinite cycle of restarting itself. I looked up the lsass.exe error and people seemed to think it was unrecoverable. As my hard drive was reasonably small (100g) and had been showing some signs of problems I decided to just buy a new one. I went out and purchased a new 320g 2.5" hard drive along with a 2.5" USB drive enclosure and another 1g stick of RAM......
Want to buy a newer net book with Win7 and swap my old Hard Disk into it. The old Hard Disk has XP Sp2. will it work? For some reason, mfr are limiting XP OS to the same machine with only 1GB. if you config the PC to have 3GB, they say you have to upgrade the OS.
View 16 Replies View Related my system only has USB & a new USB2 device I recently bought automatically
started to update the USB 2.0 system, now none of my input devices work in
Windows XP.I've now read article 813139 & it says:"Note If you are using a USB keyboard and a mouse input device, Microsoft does not recommend that you update the USB 2.0 host controller driver by means of Device Manager. If you do this, the keyboard and mouse do not function, and you cannot control the system or safely restart the computer."
Using Windows XP and just updated to Internet Explorer 7. All of my desktop shortcuts get hung up since the IE update. I have access to the internet and am able to go to any website though.
View 1 Replies View Relatedquality of AcomData External HD? Also, is this a well established company? Any info as to how this brand compares to a Seagate External HD?
View 5 Replies View RelatedI have a Compac pc that had win 98. I installed winxp on it. I now need to clean it out as the hard drive is almost full. All the original programs, etc that are on it are not in the add/remove programs so I can't uninstall them from there. I need to know the best way to clean this machine up.
View 13 Replies View RelatedLast week i installed windows XP Pro on my desktop. It has a 250GB hard drive which has 1 partition (C drive only), NTFS offcourse. I did not format it while installing windows as it has lots of stuff in it. There's over 50GB free and i�ve been removing a lot of stuff from the hard drive to make up some space but in windows i get an error message that i don't have enough disk space, the disk cleanup utility runs cant free up space and i can not install or copy anything in the hard drive. I've noticed that when i deleted some file holding (or not) the shift key the free size goes lower although the files are being deleted from the hard disk.
View 14 Replies View RelatedI always have errors reported on my hard drive, even after chkdsk /f and /f/r."Freespace marked as allocated in the volume bitmap". Why does it never go away? Windows XP Pro with all of the updates. Machine runs fine.
View 6 Replies View RelatedAbout ten days ago my Acer Aspire E360 (AMD 64 X2 3800, 2gb - Win Media Center 2005) started giving BSOD errors at startup. It would to into safe mode but no trouble shooting worked. Finally it wouldn't boot at all giving me the: NTLDR missing error. I downloaded the ISO that 'fixes' this error and it didn't work, saying that hal.dll was missing. My recovery disks - 6 in all - are available but when I booted from them they said that it would erase the entire C drive. In the meantime I downloaded ISOs to test the disk and the memory. Disk was fine, but there was one very bad memory stick, which I've replaced.
I don't want to lose the C: data. I did do an Acronis 10 backup just before it went totally down, but I'm not sure that the bad memory stick didn't corrupt data that's now backed up. A friend gave me a copy of a WinXP Pro (without serial number) to see if I could use the repair function. However, he only copied the files and did not clone the disk so it's not bootable. Using another computer I used Nero (Caldera DOS) to make a bootable disk. Unfortunately when I tried to boot up with it I got a warning: "EMM386 - address line A20 already enabled." and then it froze.
What laptops are available for purchase and would like to know if Windows can be installed on an external device so that it boots from there, not the internal Hard Disk. How would I be able to determine this so that I know the laptop's capabilities/limitations prior to buying it ?
View 13 Replies View RelatedI trying to help a friend with their computer; Dell Dimension 4700, XP Pro, and getting the error message: A DISK READ ERROR OCCURRED. PRESS CTRL & ALT & DEL Does this mean the hard drive is bad?
View 14 Replies View RelatedI recently purchased a 160 GB SimpleTech SimpleDrive (external-USB) for backup purposes. The enclosed software StorageSync (Pro) did a satisfactory job of backing up, although a little slow (1 hr - 40 min for 11.5 GB, no compression).
Neither the on-line manual or website gives information whether a restore is possible from a catastrophic-type incident of the O/S, requiring restoration from a bootup procedure. There's no instruction about preparing a "Recovery CD." I have Ghost 9.0; would this be more advisable to backup the image file; and would Ghost see the external HD from its Recovery CD?
hey good fellows out there. it seems the problem has struck again.
this is a error message: Error code 0000007a, parameter1 c03dcf3c, parameter2 c000000e, parameter3 f73cf642, parameter4 22808860.
started up then there was the error reporting to settle, so it's a hard disk error, but what exactly is still not known. here's what i was doing just BEFORE this error occured.
When I was reconnecting my hard drive, I mistakenly put the jumper in the wrong position and limited the HD capacity to ~30 gigs, so a lot of files went missing and some programs malfunctioned. Then when I figured this out and put it back in the right position, the system wouldn't boot up because"ntoskrnl.exe is missing or corrupted".
View 2 Replies View RelatedI get this cyclic redundancy check error when I try to copy files from a DVD-RW onto my hard drive. I burnt said DVD about two years ago using Cyberlink DVD Solution Power2Go. I get this error with mulitiple DVDs, but not all of them (I've got five and I get this error with only three). Also, I get the error with some files, but not others (on the same DVD). I really can't lose these files! My guess is they were burnt wrong, but I'm really not sure. Is there any way I can recover these files?
View 11 Replies View Related
