Connecting External Hard Disk To System / Getting Slow Writing?
Mar 1, 2008
I connected a 10GB HDD with Windows 2000 on it to a Windows XP machine using a USB 2.0 external drive enclosure. Apparently, I connected the HDD enclosure to a USB 1.1 port and XP advised me I could get better performance by connecting it to a USB 2.0 port.After some time, XP reported an error indicating it couldn't save E:$Mft (E: is the drive letter assigned to the external enclosure) due to a lazy write problem.I disconnected the external drive enclosure from the system and put it back in the laptop and when I boot the machine, it displays the "starting windows" screen, the progress bar goes to the end, and the machine reboots itself.
Plugged my external LaCie HDD in to my PC, as I always do and I had an SVCHOST.exe worm, apparently.. Which was healed by my AVG. Dunno how the hell I had a virus on my ext HDD in the first place. Now, when i try and access by ext HDD by double clicking its icon in "My Computer", I get the "Open With..." dialogue box. I can only browse my files by right-clicking and selecting "Explore".. Everything seems normal on the disk.
I have an external hard drive that I have assigned it a permanent hard drive letter reference through Disk Management. I have set the System Restore tab in My Computer Properties tab to not moniter this external hard drive K. Problem is that every now and then when I plug in every now and then for backing up my files via Briefcase - this will activate the System Restore function on that hard drive. This usually happens when I have the hard drive plugged in when I either turn off or turn on my computer. I stopped having the hard drive plugged in to hopefully stop the stop the System Restore on that hard drive (and then re-checked the System Restore tab)
An external hard drive. When it is on & I try to boot,I get the following error : Invalid system disk Replace the disk, and then press any key I then have to turn off the external & press any key to get it to boot. Is there a way that I can boot with that external turned on. Some setting I need to change perhaps? I have an E-Machines computer about 2 years old.
I am cloning my existing hard drive in my laptop (sata) to an external hard drive (pata) in preparation for installing a new larger hard drive (sata)in the laptop. Can I, or how do I transfer the cloned data from the external (pata) to the new internal hard drive (sata)? Thanks in advance and I apoligize if this is a rudimentary question as this is my first time attempting something like this.
My 500GB External HDD is not accessible anymore. It was working yesterday when i used it with windows 7. It automatically ran the disk check on that system and it worked. When i plugged into the USB of my XP laptop and double clicked the drive in My Computer the following error message appeared: D: is not accessible. The file or directory is corrupted or unreadable. The drive letter shows on My Computer and Disk Management.
I have two computers (a PC and a Mac) and a Maxtor One Touch External Hard disk 250 GB. I would like to back up these two machines using a single external hard disk. So I have partitioned the hard disk into two and have NTFS and FAT32 as the file systems. The NTFS partition is around 163 GB and the FAT32 is around 75GB. I could successfully back up the PC into the NTFS part but have problems with the Mac.
When the hard disk is mounted on to the Mac, both the partitions appear on the desktop. The Mac OS is 10.3 and it identifies both partition correctly. It recognises the NTFS part as readonly and FAT32 part as "readable and writable". But when I tried to backup for the first time there was an error saying "insert a new disk". I tried to overwrite the contents of the FAT32 part as I didn’t need them any longer hence asked to proceed with the backup. The Mac started erasing. I thought it was erasing the files previously present in the FAT32 part but it continued erasing for some time and finally erased the FAT32 file system itself. So the icon representing the FAT32 part of the partition of the external hard disk disappeared from the Mac’s desktop......
I have an interesting problem that shouldn't be too hard for you guys.I have three external hard-disks connected through a USB-HUB with my WinXP computer.Never had any problems whatsoever. The other day (that is, today) one of the disks didn't show up in 'My Computer'.So I did a right-click on my-computer-->manage-->disk management, like we all would do if a disk doesn't show up.The bar was there but it sayd 'Unallocated' or something like that if I recall.Basicly, it didn't have a drive letter assigned to it wich is pretty weird. Through some magic (that I don't quite remember), I got a drive letter assigned to it.It shows up in 'My Computer', so problem solved is what I thought Not even close.
I have 2 internal IDE HDD's and an external IcyBox USB2 self powered enclosure with a Maxtor 160GB 7200RPM HDD in it. The external HDD is divided into 4x40GB partitions. Running CHECKDSK on the internal drives is no problem but when I try it on a partition on the external one it goes through Phase1, Phase 2, sometimes reaches Phase 3 then hangs and if left PC switches off. Second time it hung looked at Performance tab in Task Manager and CPU was at 100% and I could hear CPU fan revving up, obviously CPU was overheating and shutting down.Looking in Event Viewer there are a large number of disk errors. Properties says: "The device,DeviceHarddisk2D, has a bad block".Clicking on the MS link tells me:the disk itself failing or the electronics on the IcyBox enclosure, the data on the disk is accessible and readable? Are there any known problems with this type of external HDD? The problem only came to light when I tried to merge partitions on external HDD using Partition Magic and it couldn't be done because of errors.
I have a Computer which operates on XP Service Pack 2 and has a Maxtor 1TB external Hard Drive hooked up. We do a lot of Video Editing (programs such as DV Storm, Vegas etc.) and up until yesterday the external came up as Local Disk E, but it became unplugged whilst the Editing programs were running.It now it comes up as Local Disk (I) but the problem is the Edit programs doesn't recognise any of the files (avi., mpg etc.) that are on the drive (comes up as 'invalid path'), and nor does it show them in their previous format.
I have Win XP Pro SP2 I also have an external Lacie 250GB hard disk I want to store my Virtual PC files on. But, it is formatted at FAT32 and I can't put a file on there that is over 4GB. So, I tried to convert the drive to NTFS, but Windows won't let me do this. It keeps telling me the disk is dirty and to run chkdsk / f. Which I have done and completes fine finding no problems on the drive. Yet convert e: /fs:NTFS still does not convert the drive reporting it is dirty. What is causing this and how do I fix it? I have tons of data on the drive so I can't re-partition it as I don't want to loose that data. I need to convert it to NTFS.
Well I have an hard drive into a external enclousure but the windows XP of a new CPU do not finish detect it when I connect it. But the same external hard drive work fine in my laptop. I formated my CPU 2 times, but i got the same error of Windows. My CPU has a new motherboard Foxconn M7VMX-K.
The USB ports work fine with my pendrive.
In my computer i can see a new hard drive with a letter (K, whithout data.
The Windows XP Administrator Disk doesn't show nothing about the external hard drive.
Last night I connected a friend's HDD to my PC so he could back-up some files onto my PC before he formatted his.He did that,and then insisted that he needed to format it ASAP,so he did so using my cables.So I turn my PC on later I find that most of the contents of my desktop are missing,and that several Apps are as well.I look in C:Documents and Settings and notice a new profile called "TEMP" alongside my normal profile with many of My Documents and personal settings for apps. For some reason, my PC loads up this TEMP profile only now, as opposed to my normal one.
I have an EXTERNAL HD. I formatted it in FAT a few months ago. Ever since then, my laptop PC was unable to recognize the unit, but the Mac (which is not working right now, unfortunately) never had a problem with it. When I connect it to my laptop PC via USB, the USB icon shows up and the "USB Mass Storage Device Properties" says the "device is working properly." But the folder doesn't show up in My Computer, and diskmgmt.msc says the device is "Unallocated." Hopefully that doesn't mean the unit crashed because I have some stuff on there.Without losing the data (that should be on it, unless it crashed), I want to convert this thing to NTFS. I did some Google searching, but the instructions on how to do this (they say use convert.exe) aren't working. Moreover, no one mentioned how to convert an External, secondary HD.
I just installed windows service pack 3 and now I'm having trouble with my external hard drive. when I go to My Computer, and click on it, it says it can't be accessed because of an I/O error. It's a Western Digital MyBook.
If I want to attach second hard disk with the same configuration of master hard disk, then system doesn't show second hard disk altogether or new hard disk begin to malfunction. Such as suddenly begin to give sounds like TICK, TICK TICK. Suddenly vanishes from the 'MY COMPUTER' drives. Suddenly denies to copy paste functions. BIOS shows both SATA drives. But Win XP doesn't load or simply hangs while starting up [booting up]. It happens when I attach second SATA drive with system. If only one SATA is attached, then WIN XP boots normally.
I'm connecting a 30GB Travelstar Hard Drive via an external USB 2.0 case to my Thinkpad T40 with Windows XP (pro). Windows immediately recognized it. However, the hard drive does not show up under Windows Explorer. I can go into Device Manager, click on Disk Drives, and it does show the new drive there (along with my main hard drive, which is a 80 GB hard drive).
I cannot figure out how to make it show up in Windows Explorer with an Drive Letter assigned to it and thus, how to actually use it.
My USB External Hard Drive suddenly decided to stop working monday before last, it is weird, like it will turn on and all, but it doesnt get recognized and while its on none of my programs will load like Ventrilo and games(ventrillo will half load but not all the way) and the computer wont shutdown while its on. but the moment i turn it off they all start running smoothly agian and the computer will shutdown immediatly (if i am at the shutdown screen). Any idea why/how this happened and how to fix it?
I want to back up my entire system to an external harddrive and then reinstall windows on the internal one.My question is can I use a program to put programs back on to the internal drive from the external harddrive. I heard ghost copies everything even registry is this true?
Running Windows XP home, well-protected from viruses and spyware with all the usual recommended programs. I have a 160G external firewire hard drive, NTFS system. Cannot access data all of a sudden, I am getting an error message, "file system corrupt and unreadable." In disk management, the drive is listed as healthy, 160G, but no NTFS listed. What could have caused this, and is there a way to retrieve the data? Are there any low-cost or freeware programs to do this, or is it inevitable to spend a "fortune?"
I am on the road and trying to do a system restore. I use an external hard drive in my office but I do not have the external hard drive with me now. I can not get the restore to complete and I can not get the undo to fully complete. Is this not working fully because I am not hooked up to my external hard drive? When I initiated the restore it asked something about the external hard drive.
Lately I have been experiencing a temporary slowdown/freeze and I notice that the hd light is blinking. I can be moving the mouse across the page, for example, when it will start responding erratically or stop. As this is happening the hd light blinks even though nothing is being saved or opened. I have disabled indexing, run virus checks and adware and spyware removal tools. I do have a wireless router attached but i haven't checked to see if it happens with my laptop also.
I have a Windowa XP laptop by Gateway, when I copy DVD's everything I do on my computer gets very slow.Is there anything that I can do to speed up computer so that I can run other programs at the same time?
How do I most efficiently and with the least chance of data loss salvage the data from the partitioned hard drive? By using the enclosure or by hooking the drive up to the old box as a slave? And is the remaining OS on C: of the partitioned drive likely to cause any problems
I turned the PC off to reboot when I though I was going into safe mode and went into regular mode instead. Now, it thinks one of my external drives is the C drive. On boot, I am getting a message that it cannot recognize find the system 32 windows config file (I'm paraphrasing).
I used the repair utility to get to the C prompt (which is pointed at the external drive) and checked the drive letters. I don't think the PC bios knows the hard drive is there.
I tried going into setup and reverting to factory installed configuration and that didn't change anything. I could not get it to recognize the hard drive.
I had to do an reformat on my PC. Before the reformat, my PC read both my external hard drives no problem. Then after the reformat, it only would read one. When I would restart with both connected, it wouldn't budge from the welcome screen. After I would unplug the "questionable" one, it would then allow me to log in as usual. I think it could be a driver issue but I'm not totally sure because it does read it after a little while. I changed the USB cable, so for now, it is holding. Can anybody figure out what it might be?
Trying to help daughter with PC problem. She has a Dell Optiplex GX260 running Windows XP Pro. For some time she has been having problems: freeze ups and other noxious behavior. When trying to open email attachments, tabs start appearing and keep on appearing until the PC is turned off. Finally, it stopped booting to Windows. When it is powered on, the Dell logo window appears briefly, then a black screen appears with a cursor top left.
Now, I would like to have a backup of both Hard Disks incase of any issues. With regards to the data, this is no issue. However I have questions regarding Hard Disk A.If I make a direct copy of Hard Disk A onto another Hard Disk (i.e. no backup program). Would it be possible to boot from this hard disk? Therefore if anything did go wrong with Hard Disk A, I could make a direct swap and boot from the backup Hard Disk
