How do I most efficiently and with the least chance of data loss salvage the data from the partitioned hard drive? By using the enclosure or by hooking the drive up to the old box as a slave? And is the remaining OS on C: of the partitioned drive likely to cause any problems
View 4 Replies
I Think After Reinstalling Windows Xp A Created A Partition, That Now Wont Let Me Access My Files. Is This Possible? Can They Be Accessed?
View 3 Replies View RelatedHad to replace the hard drive in my desktop and installed SP3. No problems yet. Any ideas on how I may be able to pull my files off the old drive? Can't get into it from My Computer although it does show up and shows there is data on the drive.
View 2 Replies View Relatedi have been working on my friends computer for about a day and the problem is he has one hard drive with 2 operating systems. now the hard drive is not partitioned for both 0S when you click MY COMPUTER it only shows the local C:/ drive as for having another OS would have shown D:/ the problem i am having is how do i get rid of the second OS without deleteing his primary one? another question is if i do a windows XP REPAIR i dont remember if it saves all that they have or does it erase everything
View 1 Replies View RelatedI tried to format my hard drive by right clicking the c: drive then clicking format. At the end, it says "Windows cannot format this drive. Quit any disk utilities or other programs that are using this drive, and make sure that no windows is displaying contents of the drive. Then try formatting again.". This happens all the time.
View 2 Replies View RelatedA while back a friend partitioned my hard drive into three different partitions. the one I use is now almost full and I would like to merge the almost-full partition with the next partition, which is completely empty. Can anyone help me with the steps to do that? Thanks in advance. I have a windows xp system with the big service pak installed also. the pc is a dell dimension 4300 with a 1.6 ghz processor and 513 mb of RAM.
View 5 Replies View Relatedi have an Acer aspire 5630 laptop, running windows xp media edtion. It has a 110 GB hard drive which Acer partitioned in 3 parts. The first one im not concerned about its almost 5 GB and called PQ service (EISA configuration. the other 2 are just over 53 GB one has my xp the other was formatted to NTFS, I found I could delete the partition and then from command from extend the main partition typing diskpart, list volume, select the volume i want to extend by typing select volume 1 or whatever then type extend with the amount or if i leave it blank it should extend the partition to the full drive. but when i type extend I get the following message. Diskpart failed to extend the volume. please make sure the volume is valid for extending. And i desperately need the extra space.
View 8 Replies View Relatedcurrent HD going bad, have second HD installed and using as back but now i need to make the second HD my primary, can i do this without having to reformat in order to add booting files.
View 2 Replies View RelatedWhen installing a larger main drive, how do I get the drivers copied onto the slave before I take out the main one I wonder is there a simple way of doing this, I am using Windows XP home edition, the PC is an oldish one and isn't any specific make, so I can't get any clever programs from the manufacturers site
View 3 Replies View RelatedI had to reinstall XP because of spyware issues. I saved important data on my slave drive. I reinstalled XP. Now the bios, device manager, and disk manager recognizes the slave drive but didn't assign it a drive letter. In disk manager it shows as a basic disk, NTFS, Healthy (Active), 18.65 GB,Online. When I right click the volume to assign a drive letter it is grayed out.
View 2 Replies View RelatedI have a new Western Digital 120 GB hard drive that I have slaved. I have formatted this drive in Windows XP. When I boot up sometimes the second drive is not there (D: Drive I go to: Control Panel System Hardware Device Manager Disk DrivesScan for hardware changes Once I do this the drive appears and is accessible, but the drive is very slow to copy data.
View 3 Replies View RelatedI'm currently running windows XP Pro on one Hard drive. I also have second hard drive which has some data in it but not plug in to my system right now. Is it possible that i can plug in my second hard drive as slave (by jumper setting) without turning off my computer, and beable to see and transfer data from my second hard drive to my first hard drive. Is it safe and possible to do that?
View 10 Replies View RelatedI am running XP Pro on a rebuilt Dell PIII. The original hard drive is 7G, so I added a 300G slave for storage. My plan now was to change the 300G drive to the Master drive. I reformatted, booted from my XP disc & installed the OS on the "new" 300G drive. Then I switched the jumper & cable so it was in the master position.and nothing.
It starts up, tells me to hit F2 for setup or F1 to continue. When I hit F1, it goes to a blank screen with flashing cursor, but no command line
The harddrive is partitioned into an C: and D: configuration. However, when I try to access the D: drive, a message tells me the drive is not formatted. IT then tells me formatting will erase all data on the drive. My question is this; if I format D:, will I lose the Data already on the C: portion of the drive? I am trying to figure out if I need to backup everything on my C: drive before I format.
View 1 Replies View RelatedI've upgraded my PC from Win98SE to XP, and installed a second HD (as a slave) using an old Samsung SV3002H i had laying about. Bios detects it, and it shows in my device manager, but aside from that, i can't access it to either format it/see it in "my computer."
View 3 Replies View RelatedMultiple computers blue screen on him lately. the 4th BSoD-laden computer, but it's got me and the Sys Admin pretty stumped, so maybe I can find an answer here. The computer is a CSI brand with AMD Athlon XP proc & Windows XP. The problem hdd is a WD 400, and we also have another working WD 400 in another computer that I'll mention later. Both have Windows XP Pro SP2 installed and were originally in separate computers (each was the only harddrive in its comp originally.
Trying to start a computer with the problem WD 400 alone results in a blue screen error right after the windows screen (if I remember correctly...it's not long after the hdd, etc is recognized anyways), and gives the STOP error 0x00000024, and mentions some problems with the NTFS. I found that the ..24 STOP error has to do with the NTFS.sys file, but that doesn't help me much. The computer does not let me do anything after this BSoD error, and upon restart, I just get the same error, no matter which Safe/etc mode I try...it doesnt load into any of the modes.
I had an NTDLR error, so I thought I could make my corrupted hard drive a slave on another computer so I could just get my stuff that way. Unfortunately when Windows XP started, it started checking the newly added slave and it took forever and started doing all this stuff, all I remember seeing is...deleting index entry yatta yatta. I don't know what it did!! But when I got into windows, all that was there what was originally on the root drive (c:/) like unzipped, My Shared Folder, and WINDOWS. NO MY DOCUMENTS, nothing..no way to even get to my user files with my favorites, documents etc. Yet, in the disk information when I right click it says the drive is occupied with the same amount as before - 80 gigs. I tried to defrag too and the files that I can't find otherwise were being defragmented! So how can I access these files? Windows xp recovery said it could not be fixed. I need this stuff, is there any other way to get it!? It's NTFS file format.
View 11 Replies View RelatedI just installed Windows Xp on a brand new HDD. The previous hard drive had Windows 2000, and since I didn't want to lose any files I installed that drive as the slave. But when I boot the machine up. And select the slave drive, none of the files, such as pictures, word docs, etc. are there. The folders are blank. The jumper pin setting is correct because the picture is right on the label for the drive
View 5 Replies View RelatedCan I install XP on a hard drive which has only one partition with data without destroying the data?
View 2 Replies View RelatedI am cloning my existing hard drive in my laptop (sata) to an external hard drive (pata) in preparation for installing a new larger hard drive (sata)in the laptop. Can I, or how do I transfer the cloned data from the external (pata) to the new internal hard drive (sata)? Thanks in advance and I apoligize if this is a rudimentary question as this is my first time attempting something like this.
View 6 Replies View RelatedI recently helped someone save the documents off of their computer after it crashed (it was missing a Windows file. I tried the repair command and it wouldn't work, so I decided to save the files and reformat the hard drive).I plugged the hard drive into a working computer and pulled all the documents off of it (VERY slowly) onto an external hard drive.
Every once in awhile I wouldn't be able to pull a picture or document off because of a cyclic redundancy check error. I just moved on and saved what I could. I assumed it was because the hard drive was already bad so I just moved what I could.
It's a mole hill of a problem, but it is a bit annoying to have to click on my principal drive ("C") every time I'm doing a "save". I have enclosed an excerpt of a screen shot of my "save as" window to display how the default drive being automatically selected is the "D" drive rather than the "C" drive that I use primarily. To be honest, I don't know whether this can be corrected by a software change, or whether it's the way the two hard drives are connected in my computer.
View 14 Replies View RelatedIs There Anyway To Make A file You Delete To Go To The Recycle Bin And A Certain Part Of A Hard Drive?
View 6 Replies View RelatedI had this idea, see if anybody has an opinion about this. My wife has an old XP computer I want to buy her a new one but she doesn't like the vista and she wants to keep the old xp operating system. What I want to do is take the old hard drive and put it in the new computer as the master and take the new hard drive and put it in as the slave erasing the vista off it. Then using the master slave way can I transfer the xp operating system and all her files and data from the old hard drive to the new one.
View 3 Replies View Relatedwas unable to save all the data for the file The Data has been lost
View 1 Replies View RelatedI have recently added a 160Gb Maxtor 6 P160PO drive in an external hi-speed USB housing connected via a 4 port USB-2 card. I have tried copying large amounts of data (13-20Gb) but after a few minutes, I get "The drive is not ready" and it disappears from My Computer. If I disconnect it and re-connect it, it will reappear. The same happended with a 20Gb drive I swapped in, so it seems that it's not the drive. I have tried a different port to no avail.
View 1 Replies View RelatedMy hard drive just changed to fat32 for some reason and all the data is gone? Does anyone know what could be wrong, can I get my data back? When I start it up it goes through a check, ive left the check running and its been going ages, im not sure what its doing. Says something about lost clusters and truncated?
View 1 Replies View RelatedI got a 2nd hand lap top from my boss yesterday. Took it home last night and formatted the hard drive, then installed Centos and Linux over it. Got to work this morning to discover that my boss hadn't copied all his files over! I need to recover all his Outlook files.
View 11 Replies View RelatedMy Sony Vaio had a file missing hal.dll file. A computer guy tried to use a boot disc to get the file and cant. Says my hard drives have crashed. And he cant do anythng because its a raid system and 2 hard drives.suggested i call someone to remove the data. its not backed up!!!
View 14 Replies View RelatedI am new to this site and I come here today to ask a question, perhaps someone here will be able to offer a bit of advice.I have a toshiba laptop, running xp pro sp2, 80GB hard drive.Hard drive inoperable due to bad sectors. My hard drive was partitioned into several sections with the C: section containing the os and the D: section containing my data. I could not boot my system so I tried reinstalling os on C: section again, it required a format. I formatted the C: section and then attempted to reinstall os, no luck!Using a third party diagnostic CD I see that my data on the D: partition is still available and intact. The diagnostic disk creates a makeshift os which allows for very limited manipulation of information on hard drive. Since I can not install os onto bad hard drive section C how can I transfer data from the section D: partition to either a new hard drive or to a storage medium?
View 3 Replies View RelatedMy old hdd was used to run Windows XP Pro, where my profile was password protect and set for private. Since replacing that crashed pc with a new 1 that runs Windows Media Center I have been able to recover all except the data listed under my account's My Documents. When I scroll over it it says folder empty. When I click on it it says access denied (something like that). How can I retrieve this data. I tried some freeware I found online, but all it did was locate previously deleted files to recover. I want to recover stuff not previously deleted.
View 3 Replies View Related
