current HD going bad, have second HD installed and using as back but now i need to make the second HD my primary, can i do this without having to reformat in order to add booting files.
View 2 RepliesWhen installing a larger main drive, how do I get the drivers copied onto the slave before I take out the main one I wonder is there a simple way of doing this, I am using Windows XP home edition, the PC is an oldish one and isn't any specific make, so I can't get any clever programs from the manufacturers site
View 3 Replies View RelatedI had to reinstall XP because of spyware issues. I saved important data on my slave drive. I reinstalled XP. Now the bios, device manager, and disk manager recognizes the slave drive but didn't assign it a drive letter. In disk manager it shows as a basic disk, NTFS, Healthy (Active), 18.65 GB,Online. When I right click the volume to assign a drive letter it is grayed out.
View 2 Replies View RelatedIs there a way to convert a partioned hard drive (c: / d for example and make it a single drive (c without losing all your folders and programs on the partioned drive. I am running out of space on the c: drive but the d: drive has some space left on it. And I want to just put them together as one drive.
View 9 Replies View RelatedI have seen this messge twice. Once on a friends PC and just now on mine. My computer has been running for maybe... 3 days straight now. I turned it off for about 3 hours to keep my room cool. I turned it back on an heard "beep...beep...beep...beep" (the same beep you hear if the ram isn't snapped in the socket all the way) and at the boot up it said "Primary slave hard disk fail" XP would not start. So i hit the reset button, same thing, hit it again, same thing. Powered off and powered back on and it started up fine.
View 1 Replies View RelatedCan I just put a Samsung HD253GJ with Windows XP Pro w/ Service Pack 3 preloaded hard drive in a dell p-490 as the primary drive. Plug and play or...what would i need to do?
View 6 Replies View RelatedI have a new Western Digital 120 GB hard drive that I have slaved. I have formatted this drive in Windows XP. When I boot up sometimes the second drive is not there (D: Drive I go to: Control Panel System Hardware Device Manager Disk DrivesScan for hardware changes Once I do this the drive appears and is accessible, but the drive is very slow to copy data.
View 3 Replies View RelatedI'm currently running windows XP Pro on one Hard drive. I also have second hard drive which has some data in it but not plug in to my system right now. Is it possible that i can plug in my second hard drive as slave (by jumper setting) without turning off my computer, and beable to see and transfer data from my second hard drive to my first hard drive. Is it safe and possible to do that?
View 10 Replies View RelatedI had a two seperate versions of windows installed on two seperate hard drives, when i turn the computer on it asks me which one i want to boot from. well the second hard drive is now dying and somtimes it tells me DISK BOOT FAILURE, INSERT BOOT DISK AND PRESS ENTER. now this only happends when the second hard drive doesnt work. I have tried to just unplug the second drive to see if it would boot off of the original copy on the first drive but i get the same thing.
View 7 Replies View RelatedI am running XP Pro on a rebuilt Dell PIII. The original hard drive is 7G, so I added a 300G slave for storage. My plan now was to change the 300G drive to the Master drive. I reformatted, booted from my XP disc & installed the OS on the "new" 300G drive. Then I switched the jumper & cable so it was in the master position.and nothing.
It starts up, tells me to hit F2 for setup or F1 to continue. When I hit F1, it goes to a blank screen with flashing cursor, but no command line
Is there a way to partition the primary disk on a computer without reformatting?A computer that I inherited (HP Pavillion) has a 120Gb hard drive partitioned into two sections C drive 104Gb NTFS primary D drive 7Gb FAT32 recovery I would like to split the primary into two sections, if possible without reformatting
View 3 Replies View RelatedI've upgraded my PC from Win98SE to XP, and installed a second HD (as a slave) using an old Samsung SV3002H i had laying about. Bios detects it, and it shows in my device manager, but aside from that, i can't access it to either format it/see it in "my computer."
View 3 Replies View RelatedMultiple computers blue screen on him lately. the 4th BSoD-laden computer, but it's got me and the Sys Admin pretty stumped, so maybe I can find an answer here. The computer is a CSI brand with AMD Athlon XP proc & Windows XP. The problem hdd is a WD 400, and we also have another working WD 400 in another computer that I'll mention later. Both have Windows XP Pro SP2 installed and were originally in separate computers (each was the only harddrive in its comp originally.
Trying to start a computer with the problem WD 400 alone results in a blue screen error right after the windows screen (if I remember correctly...it's not long after the hdd, etc is recognized anyways), and gives the STOP error 0x00000024, and mentions some problems with the NTFS. I found that the ..24 STOP error has to do with the NTFS.sys file, but that doesn't help me much. The computer does not let me do anything after this BSoD error, and upon restart, I just get the same error, no matter which Safe/etc mode I try...it doesnt load into any of the modes.
I created a mess (but I'm learning more each day), and after a week got it going at least, but on boot got messagae "primary hard disc drive 1 not found" which required clicking F1 to continue. I ended up reinstalling XP, got everything up and running, but still have the HD message at each boot. I've passed all of the diagnostics in Set-Up, and found nothing on any of the troubleshooting sites that helped. Set-up says: Primary Drive 0 - Hard Drive; Primary Drive 1 - Unknown Device; Secondary Drives 0 adn 1 are both CD-ROM Readers. Everything works just fine, but I'd like to figure the drive problem. I had to create a partition for the reinstall - had no choice.
View 3 Replies View RelatedHow do I most efficiently and with the least chance of data loss salvage the data from the partitioned hard drive? By using the enclosure or by hooking the drive up to the old box as a slave? And is the remaining OS on C: of the partitioned drive likely to cause any problems
View 4 Replies View RelatedI had an NTDLR error, so I thought I could make my corrupted hard drive a slave on another computer so I could just get my stuff that way. Unfortunately when Windows XP started, it started checking the newly added slave and it took forever and started doing all this stuff, all I remember seeing is...deleting index entry yatta yatta. I don't know what it did!! But when I got into windows, all that was there what was originally on the root drive (c:/) like unzipped, My Shared Folder, and WINDOWS. NO MY DOCUMENTS, nothing..no way to even get to my user files with my favorites, documents etc. Yet, in the disk information when I right click it says the drive is occupied with the same amount as before - 80 gigs. I tried to defrag too and the files that I can't find otherwise were being defragmented! So how can I access these files? Windows xp recovery said it could not be fixed. I need this stuff, is there any other way to get it!? It's NTFS file format.
View 11 Replies View RelatedMy problem is a result of a long series of attempts to fix a corrupt Windows registry file. A few days ago I booted my laptop and received a blue screen error: c0000218, relating to a corrupt Windows registry file. Windows could not load. After a lot of searching online I found a way to manually replace this and four other related files from the c:WindowsRepair folder using the command prompt.
This process seemed to work and Windows began to load. I then received a lsass.exe error saying something about invalid passwords. My laptop began an infinite cycle of restarting itself. I looked up the lsass.exe error and people seemed to think it was unrecoverable. As my hard drive was reasonably small (100g) and had been showing some signs of problems I decided to just buy a new one. I went out and purchased a new 320g 2.5" hard drive along with a 2.5" USB drive enclosure and another 1g stick of RAM......
I changed something in setup utility, but not shur what it is that I changed. now I get this, and Secondary hard disk drive 1 not found.
View 3 Replies View RelatedI installed gentoo on my primary hard drive and have boot, swap and root partitions on it and they take up the whole drive. I want to install windows on the secondary hard disk but it is saying it needs a compatible partition on the primary drive but it is already full!
View 8 Replies View RelatedI have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
View 1 Replies View RelatedMy laptop died and I removed the hard drive.i hooked the hard drive up to my new laptop via a SATA/IDE cable.
I can see the old hard drive in the E drive and it appears that all the contents are there by the size of the hard drive (same as when I had it in the old laptop) but I can only see, actually view, a very small percentage of the drive.
My goal: I want to transfer all old music, word documents and photos from old laptop into new laptop.
using XP. am having wild swings in my hard drive space go from 46.1 to 44.1 and sometimes in between. have not installed any new programs recently. what could be causing it and how do i correct also am noticing my laptop as slowed appreciablydo know whether the two problems are correlated
View 3 Replies View Relatedi have a Compaq nx 7400 .i was hahving a lot of problems with the computer so i decided to put a new hard drive in and reinstall XP .
well i have the new hard drive in and started up the machine and changed the bott options to run from the dvd and all went fine until i should press the ENTER ( return ) button to install XP now . as soon as i did that the next window said no hard drive found . this was also happening on the old hard drive that was in the machine .
Dell Dimension 4100 desk top Bios version AO6 Information on Primary IDE master-Primary slave are showing not installed how can I fix this without these computer will not boot up since OS is on primary master drive
View 2 Replies View RelatedI had this idea, see if anybody has an opinion about this. My wife has an old XP computer I want to buy her a new one but she doesn't like the vista and she wants to keep the old xp operating system. What I want to do is take the old hard drive and put it in the new computer as the master and take the new hard drive and put it in as the slave erasing the vista off it. Then using the master slave way can I transfer the xp operating system and all her files and data from the old hard drive to the new one.
View 3 Replies View RelatedWe have Windows XP Home Edition 80 GBCan we copy entire hard drive to an external hard drive?
View 36 Replies View RelatedCan anyone tell me whats the difference between a ATA hard drive and a SATA hard drive?
View 2 Replies View RelatedI recently helped someone save the documents off of their computer after it crashed (it was missing a Windows file. I tried the repair command and it wouldn't work, so I decided to save the files and reformat the hard drive).I plugged the hard drive into a working computer and pulled all the documents off of it (VERY slowly) onto an external hard drive.
Every once in awhile I wouldn't be able to pull a picture or document off because of a cyclic redundancy check error. I just moved on and saved what I could. I assumed it was because the hard drive was already bad so I just moved what I could.
I am cloning my existing hard drive in my laptop (sata) to an external hard drive (pata) in preparation for installing a new larger hard drive (sata)in the laptop. Can I, or how do I transfer the cloned data from the external (pata) to the new internal hard drive (sata)? Thanks in advance and I apoligize if this is a rudimentary question as this is my first time attempting something like this.
View 6 Replies View RelatedI can not access hard disk properties because Windows Explorer hangs whenever I Right click on a hard drive icon. I am running WXP pro SP2 completely up to date with updates.
View 1 Replies View RelatedA problem has been detected and Windows has been shut down to prevent damage to your computer.If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps.Check for viruses on your computer. Remove any newly installed hard disks or hard drive controllers.Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
View 4 Replies View Related