Is there a way to convert a partioned hard drive (c: / d for example and make it a single drive (c without losing all your folders and programs on the partioned drive. I am running out of space on the c: drive but the d: drive has some space left on it. And I want to just put them together as one drive.
View 9 Replies
after I did a clean install on my daughters Dell E310, Win XP Home Edition there are now a C drive and a D drive. Partioned how?
I know I can go to my Computer and manage to delete one drive, but what happens if I delete the drive that has the important files to run the OS?
Yesterday my pc decided to give me a bit of grief. I loaded up the pc and went to click into My Documents and found the whole computer just free up. I restarted the pc thinking it was just messing me around, intending to do a defrag and virus scan to make sure (Norton 2010 internet security). To my horror, the pc wouldnt move past the Windows XP boot logo, it just sat there with the loading bar moving across the screen as if it was permantnly trying to load.
I reset again hoping to start it in safe mode, however upon doing selecting "Start In Safe Mode" it went through to a black load screen with white writing and populated the screen with loads of text about how it couldnt load specific windows files located on a partitioned part of the hard drive (that I load the OS on).
current HD going bad, have second HD installed and using as back but now i need to make the second HD my primary, can i do this without having to reformat in order to add booting files.
View 2 Replies View RelatedI currently have 2 partitions on a single hard drive (each one is running xp).The older partition (the one that I want to get rid of) is the primary partition, while the newer one (the one that I want to keep) is the extended partition. Could someone please tell me how to delete the primary partition and make the computer
recognize the extended partition as the primary partition?
Can anybody point me to the instructions about how to install XP Pro to a single Win98 hard drive - to make it dual boot, like Win 2k? I've been looking all around the internet and the only thing I've found is an XP dual boot on a 2nd hard drive.
View 14 Replies View RelatedI have XP pro, and a 15 gig drive. The drive was wiped and formated NTFS. Wanted to partion the drive. Went to system manager, changed it to dynamic, used windows interface. It would only let me do up to a 7mb partion. How do I change this? I want about a 4 gig
View 4 Replies View RelatedI have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
View 1 Replies View RelatedEver wanted to convert your internal Zip Drive to a portable one? Purchase a Mobile Hard Disk Rack. Install your internal Zip Drive to the Rack. XP will automatically recognize the Zip Drive and you are good to go!
View 9 Replies View RelatedMy laptop died and I removed the hard drive.i hooked the hard drive up to my new laptop via a SATA/IDE cable.
I can see the old hard drive in the E drive and it appears that all the contents are there by the size of the hard drive (same as when I had it in the old laptop) but I can only see, actually view, a very small percentage of the drive.
My goal: I want to transfer all old music, word documents and photos from old laptop into new laptop.
I wanted to convert NTFS or FAT32 but my laptop don't have a floppy drive so I can not use the win98 or ME start up disk. I can not format my drive but I can use fdisk from the win98 cd.
View 5 Replies View Relatedusing XP. am having wild swings in my hard drive space go from 46.1 to 44.1 and sometimes in between. have not installed any new programs recently. what could be causing it and how do i correct also am noticing my laptop as slowed appreciablydo know whether the two problems are correlated
View 3 Replies View Relatedi have a Compaq nx 7400 .i was hahving a lot of problems with the computer so i decided to put a new hard drive in and reinstall XP .
well i have the new hard drive in and started up the machine and changed the bott options to run from the dvd and all went fine until i should press the ENTER ( return ) button to install XP now . as soon as i did that the next window said no hard drive found . this was also happening on the old hard drive that was in the machine .
At work, we install a lot of different operating systems on computers, both for use within the school and for staff members' personal computers. In order to make things easier, we want to be able to create a USB pendrive that contains all of the operating systems we want to use and some form of menu to start the installation of each. The problem is, I've not been able to find guides that explain how to do exactly what we want.
View 3 Replies View RelatedNo matter what I do, when I change the properties of a single directory to either show or not show hidden files and folders, that property then changes in every single directory on the whole drive. I do not click on "Apply to All Folders", I just go to the directory of interest and change the button in Folder Options>View and press "OK". Is there a trick here? Basically I want some folders to show hidden folders, and others to not show them. Right now it's either all or nothing! Again, I am NOT pressing apply to all, which I know will apply all view settings to every folder.
View 4 Replies View RelatedWhen installing a larger main drive, how do I get the drivers copied onto the slave before I take out the main one I wonder is there a simple way of doing this, I am using Windows XP home edition, the PC is an oldish one and isn't any specific make, so I can't get any clever programs from the manufacturers site
View 3 Replies View RelatedI use Cobian Backup to produce a zip-file containing all files and folders, except for temporary-folders (I added an exclude-filter), of my system.Before I can rely on this method, I need to find a way of restoring the 27 gb zip-file, which I store on a networked drive, easily. how booting up a laptop with a formatted harddrive, be able to access a network-drive and extract all the contents of the networked zip-file to the hard drive?
View 14 Replies View RelatedA little over a year ago I purchased a used IBM Thinkpad laptop from ebay for my wife. It came with Windows 2000 Professional installed and everything worked fine. No CDs or floppies came with the computer. A couple of months later, it was stolen by one of her business associates. It eventually was recovered, but the thief had installed Windows XP along with the OS that was already installed. In trying to remove XP and return the machine to its original state, I somehow managed to eventually not be able to use either OS. As it stands now I have no OS and cannot even access my hard drive.When I boot from a floppy then try to change to C: drive, I get the error message: Invalid media type reading drive c: Abort, Retry, Fail?
View 7 Replies View RelatedA friend gave me a laptop, my problem is that it came from Japan thus everything is japanase thus I can't hardly use it. The reason I accept it is bcoz he said I can try to reinstall a win xp with english version (btw, the OS is win xp pro in japanase version). Thus I bought win xp pro sp2 and try to reinstall it, so I reboot fm cd rom and while the windows setup is starting, the system stopped and the message on my screen read as:A problem has been detected and windows has been shutdown to prevent damage to your computer.If this is the first time you've seen this error screen, restart your computer. If this screen appears again follow these steps:Check for viruses on your computer, resume any newly installed hard drives or hard drive controllers, check your hard drive to make sure it is porperly configured and terminated. Run CHKDSK/F to check hard drive corruption. then restart computer. how in the world I can follow the above steps if everything written on it are in japanase language? I also try to visit the manufacture's website, thinking that perhaps it help solve the problem but....i also need a japanase translator to understand it.
View 14 Replies View RelatedI had to reinstall XP because of spyware issues. I saved important data on my slave drive. I reinstalled XP. Now the bios, device manager, and disk manager recognizes the slave drive but didn't assign it a drive letter. In disk manager it shows as a basic disk, NTFS, Healthy (Active), 18.65 GB,Online. When I right click the volume to assign a drive letter it is grayed out.
View 2 Replies View Relatedi screwed up my registry, and of all things it was the keyboard driver or something, so theres no hope of fixing it on my computer. ive got the drive hooked up as the slave on a different computer, but i cant figure out how to edit the registry on my drive rather than the primary drive. is there any editors that will open it from a file? any way of decompiling it? theres got to be some way to edit it. also, they are both xp.
View 4 Replies View RelatedI have just bought and installed (to the point of completing initialization under Disk Management) a new 1 TB hard drive. Originally, I was planning to use it solely for data storage.However, I am thinking of installing Windows XP Pro and all the programs I currently use on it, thereby making it the new OS and programs drive, while using the original 120 GB HD as a data/backup drive.I think the main appeal of doing this, for me, is that it also presents an opportunity to reinstall Windows on a machine which hasn't had this done for more than three years, and which currently seems to take at least five minutes to boot to a "usable" state, despite having a reasonably high spec for its age (it was bought in 2001, but as a result of the upgrade
View 10 Replies View RelatedI have 69.1 memory free from 74.5 and i noticed no matter how much i delete i cant get up into the 70s.For example this month i have deleted a ton of music files that came up to about 400mb,Then a few programs that were around 50mb each and still nothing .If anything it seems i am going down in memory instead of gaining from deleting these programs.
View 14 Replies View RelatedI had this idea, see if anybody has an opinion about this. My wife has an old XP computer I want to buy her a new one but she doesn't like the vista and she wants to keep the old xp operating system. What I want to do is take the old hard drive and put it in the new computer as the master and take the new hard drive and put it in as the slave erasing the vista off it. Then using the master slave way can I transfer the xp operating system and all her files and data from the old hard drive to the new one.
View 3 Replies View RelatedWe have Windows XP Home Edition 80 GBCan we copy entire hard drive to an external hard drive?
View 36 Replies View RelatedCan anyone tell me whats the difference between a ATA hard drive and a SATA hard drive?
View 2 Replies View RelatedI've connected an external USB drive, but when I go to My Computer it shows it as a network drive. In addition, it gives it the same name as the mapped network drive that already exists there. When I change the name of the external drive there, it then changes the name of the mapped network drive, so again they both have the same name, although the drive letters are different. Any ideas how to make the external drive appear where it belongs in My Computer, under Hard Disk drives?
View 8 Replies View RelatedI turned the PC off to reboot when I though I was going into safe mode and went into regular mode instead. Now, it thinks one of my external drives is the C drive. On boot, I am getting a message that it cannot recognize find the system 32 windows config file (I'm paraphrasing).
I used the repair utility to get to the C prompt (which is pointed at the external drive) and checked the drive letters. I don't think the PC bios knows the hard drive is there.
I tried going into setup and reverting to factory installed configuration and that didn't change anything. I could not get it to recognize the hard drive.
computer's running a lil bit slow and wont allow me to install my new mobile phone software as c drive memory is full, i've tried my best to move things to the d drive hard disk but its still really full.is there any safe way of transferring most of the programs and files over to the second hard drive?
View 9 Replies View RelatedA while back a friend partitioned my hard drive into three different partitions. the one I use is now almost full and I would like to merge the almost-full partition with the next partition, which is completely empty. Can anyone help me with the steps to do that? Thanks in advance. I have a windows xp system with the big service pak installed also. the pc is a dell dimension 4300 with a 1.6 ghz processor and 513 mb of RAM.
View 5 Replies View RelatedCorrect me if I'm wrong but I was under the impression that hard drive letters were assigned each time the machine booted up & only c & d were reserved for the operating system & CD/DVD drive & if the number of drives altered from one boot up to the next these letters could change. The reason hat I ask is that I changed an internal drive which had several partitions on it only to find that this drive isn't recognized, but even though it isn't recognized by My Computer or disk management the other partition are labeled as if this were listed.I now don't have a an 'e' & 'g' drive listed. But I do have a 'J' & 'k' listed. Where is my other drive 'e' & 'g' & how do I get to use the data on them.
View 6 Replies View Related
