Difference Between A ATA Hard Drive And A SATA Hard Drive?
Oct 5, 2006Can anyone tell me whats the difference between a ATA hard drive and a SATA hard drive?
View 2 RepliesCan anyone tell me whats the difference between a ATA hard drive and a SATA hard drive?
View 2 RepliesI recently bought a new system with XP home already installed. Now I find that I should have installed the new SATA hard drive for better perfomance with my new P4 dual layered processor. I have ordered the new SATA 80 GB drive and would expect that when I install the XP on it I will have to call microsoft to activate it on the hard drive (since it was originally installed on the hard drive that I got with the new system). Any issues here or just call and explain the upgrade during the activation? (Understood that I will have to reinstall my other software again) As a follow up to this, would there be any problem slaving the original drive on the same IDE ribbon as the new SATA drive?
View 7 Replies View RelatedI have an HP Media PC M400Y. It is a P4 3.0 Ghz with 1GB ram. It originally came with MCE2002. Last week I upgraded to MCE2005 to use the media extender feature with my new X-box 360.
Here is the problem and some background.
About a year ago, I had installed a second SATA hard drive, Seagate Baracuda 300GB, model ST3300831AS. This drive was plug and play into the motherboard and never had any issues. Before reformating the main C: drive, I moved all my valuable data on the SATA drive.
I then turned the PC off, removed the power and signal cables from the SATA drive. (I'm a novice, and didn't want to take any chances of erasing the SATA drive, while reformating the main C drive)
i have a hp compaq dc7100 it has a sata hard drive in it, i need the drivers for it, not able to load xp on in locks up, i do not have the drives, i checked with hp not able to find.
View 5 Replies View RelatedJust bought a 300Gig Maxtor SATA hard drive. My supports the connection onboard. How do I get Windows XP pro to reconized the full 300Gigs and not just 137Gigs. I have a Intel(R) Desktop board D85GVHZ Base System
Intel(R) Celeron CPU 3.06Hz 512MB of ram.
I wasn't sure where this thread should be placed. I want to install XP and it wouldn't detect my hard drive. Since I have no floppy drive I want to slipstream a xp cd with the drivers already there. I am using the program nLite to make the bootable disc. However the problem is that I can't find the drivers or i'm unsure what is correct. My controllers are... Intel(R) 82801HEM/HBM SATA AHCI Controller Intel(R) ICH8M Ultra ATA Storage Controllers 2850.. But chipset is Mobile Intel(R) 965 Express Chipset Family.
View 7 Replies View RelatedMy motherboard died and I had my files password protected in Windows XP Media Edition, can I connect the SATA hard drive to another PC via USB and unlock the protected files, or does it have to run as the main drive to allow access and entry of password and then making all files public?
View 1 Replies View RelatedSo I was bored today and began creating a old Pentium 4 System out of old PC parts around the house.Now, I have assembled everything and have tested all the parts and all are working fine, However when I go to install Windows XP on the machine it will not detect the Hard Drive (On the Partition Screen). Now I thought it may be a hard drive problem so I connected the hard drive up to my current PC and ran the XP Installation fine.However, Now when I try to boot the XP I installed on the hard drive off of my other system it will get to the splash screen and restart, so I turned off automatic restart on system failure and I get the 0x0000007B Stop error.
So I retried the XP installation on the system again, got to the Partition and Hard Drive selection screen and still no Hard Drive to be seen, I plugged in a USB and it detected it fine.I have tried booting in safe mode & every option under F8, However it just restarts on the XP splash screen, And as I said the hard drive seems fine as it comes up in bios and my main PC ran it fine, So I'm beginning to think that i'm in need of my motherboards SATA Drivers or something.
I'm can't get WinXP installation to find my Sata Hard-drive. I'm running Suse Linux on my IDE-HD and I could also had no problems getting my Suse 10.1 installation to install on the SATA-HD. I've booted up with winxp media install disk and tried to use the F6 key at the right time but nothing happens so it keeps going until I get to the point where I can press the S key to install SATA RAID driver from disk that came with my motherboard. The drivers install but then windows install still says no disk to install windows... I don't get it.
I've checked my bios and SATA in there, in fact the first thing I see when I boot up in the boot sequence is the SATA drive. Linux knows it's there but windows install doesn't. I installed XP on a WD SATA drive before and all I had to do was press F6 to install the controller from the XP disk but that doesn't work now.
I'm not completely computer illiterate but i have never set-up a dual or triboot system before.I want to triboot XP Pro, Vista Home Premium and Ubuntu. I have a brand new 500GB SATA hard drive which is straight out of the box. I don't have vista yet but plan on getting it soon (when the next service pack is released) and don't want to have to reformat my hard drive when i do. So i thought it would be better to prepare for it now
View 1 Replies View RelatedI just bought me a new SATA 250GB Hard Drive and a external hard drive enclosure. I received the items today and I just realize the hard drive enclosure doesn't build into the way to connect to the SATA 7-pin data connector. All it has is the Parallel ATA 40-pin data connector. Can anyone recommend any external hard drive enclosure that can connect to SATA connector directly. And there is a main reason why I choose a SATA hard drive.
View 1 Replies View RelatedI want to install Windows XP on a new SATA HDD drive. The computer in question came with Windows Vista installed. There is no IDE option in the BIOS. There is no floppy drive on the unit. So it looks like I might have to slipstream all the drivers, etc., on to the unit (which I have no clue how to do). I do not have the motherboard make or model number, nor do I have the motherboard CD. My business partner is trying to take the cover off the laptop as we speak, but we're having trouble getting it off. Thus, as of now, we can't identify the motherboard manufacturer or the serial number.
Can anyone here point us in the right direction? The computer in question is a Compaq Presario c769us (laptop). It was purchased in June 2008. This all started when my business partner decided to use a Vista System Recovery CD to overwrite the existing copy of Vista that he had on the computer. After he ran the disk, the system stopped working. So right now, we have the old hard drive, which contains a non-working copy of Vista on it (which we can 't delete), and we have the new hard drive (a 250 GB Hitachi). So maybe we could just delete the copy of Vista on the old hard drive - the self drive test checked out okay on the old hard drive. So I guess the two options are - figure out a way to put XP on the NEW hard drive, or figure out a way to put XP on the OLD hard drive and delete Vista from it first. If we can put XP on the old hard drive and remove Vista from it, we could take the new hard drive back, and get our money back, too.
My old IDE hard drive went out on me so i went and bought a 500g WD SATA hard drive. When I put the windows installation disk in it does not recognize my SATA hard drive. after looking into it online, i found that alot of people had this issue. I read a few suggestions and tried them, (using the F6 function during install with drivers on a floppy disk, and streamlining drivers intot he windows installation disk itself using NLite), and none of them seem to work. I then used my friends old IDE hard drive, installed windows, and used a program to make a disk image of my hard drive and transfer it to my SATA drive. This didnt work either. I havn't fiddled with drive letters, (you know c: and e: and so on) i am thinking this may help but I am not sure. It is not a boot order issue i know how to do all that and nothing works. I am looking for a way to get Windows XP onto my SATA drive. (yes my mother board detects my SATA drive, and it is showing up in windows i just cant seem to get windows on it.)
I would prefer to just copy it from my IDE drive since i have already installed all the updates so if this is possible please let me know.If you know what kind of boot disk i need for windows xp installation to recognize my sata drive during installation that would be a big help too. (i have tried sata controller drivers for my motherboard, i tried using the software that came with my hard drive, and this too didn't work.)
I just built my first computer (specs in signature) with a SATA hard drive. I put the windows XP Pro CD and it formatted my Hard drive the it installed windows, but it says that windows could not start due to a hardware configuration problem. Is there some special thing I need to set to get it to boot from the drive or what?
View 11 Replies View RelatedI have a maxtor hard drive SATA 200GB as my main drive and a second drive D. Very recently when I have noticed that my computer took longer to boot into windows. Applications seem to take a bit longer than usual to load. I have XP SP2 installed. I defragment my drive every few weeks so its not a defragment problem however when I try to defrag it now, it takes many times longer to do so. Also for a scan disk of C: (chkdsk on boot) it took 6 hours to get to about 25%. So there must be a problem. I can hear the hard drive loading sound for a few seconds and then there is a very long pause maybe about 10-20 minutes. It should only take a few hours the last time i did it maybe about 5 hours. Something is wrong.
When I transfer a large file like 1gb into my drive D it takes 15 minutes. Which is a bit long for a SATA enabled hard drive. I have had this drive for about 2 years now and it has never gone this slow before. I have downloaded the seatools from the maxtor website which diagnoses the drive. The tool ran slow but my hard drive passed the tests. Also when I ran that scan disk, it did say there was a mirror copy of something and also some other things. I think it had the word security in it so it deleted somethings. It mentioned indexes and some files. I forgot most of it.
I have checked my D drive and it is running fine and unaffected. Also I noticed during bootup that on the windows logo screen, the one with the bar moving from left to right that it freezes for about 5 seconds somewhere near the end of its loading. Then my keyboard lights come on (recognises keyboard). Later after the logo disappears, the screen is black for about 1-2 minutes and the hard drive periodically stops loading then starts loading something. This also happens when the welcome blue background screen comes on which is making boot times slow. Also happens when I shut down. There are some periods of hard disk inactivity.
Does anyone make a USB dock that you can use with both IDE and SATA drives?
View 10 Replies View RelatedI have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
View 1 Replies View RelatedMy laptop died and I removed the hard drive.i hooked the hard drive up to my new laptop via a SATA/IDE cable.
I can see the old hard drive in the E drive and it appears that all the contents are there by the size of the hard drive (same as when I had it in the old laptop) but I can only see, actually view, a very small percentage of the drive.
My goal: I want to transfer all old music, word documents and photos from old laptop into new laptop.
current HD going bad, have second HD installed and using as back but now i need to make the second HD my primary, can i do this without having to reformat in order to add booting files.
View 2 Replies View Relatedusing XP. am having wild swings in my hard drive space go from 46.1 to 44.1 and sometimes in between. have not installed any new programs recently. what could be causing it and how do i correct also am noticing my laptop as slowed appreciablydo know whether the two problems are correlated
View 3 Replies View Relatedi have a Compaq nx 7400 .i was hahving a lot of problems with the computer so i decided to put a new hard drive in and reinstall XP .
well i have the new hard drive in and started up the machine and changed the bott options to run from the dvd and all went fine until i should press the ENTER ( return ) button to install XP now . as soon as i did that the next window said no hard drive found . this was also happening on the old hard drive that was in the machine .
I had this idea, see if anybody has an opinion about this. My wife has an old XP computer I want to buy her a new one but she doesn't like the vista and she wants to keep the old xp operating system. What I want to do is take the old hard drive and put it in the new computer as the master and take the new hard drive and put it in as the slave erasing the vista off it. Then using the master slave way can I transfer the xp operating system and all her files and data from the old hard drive to the new one.
View 3 Replies View RelatedWe have Windows XP Home Edition 80 GBCan we copy entire hard drive to an external hard drive?
View 36 Replies View RelatedI recently helped someone save the documents off of their computer after it crashed (it was missing a Windows file. I tried the repair command and it wouldn't work, so I decided to save the files and reformat the hard drive).I plugged the hard drive into a working computer and pulled all the documents off of it (VERY slowly) onto an external hard drive.
Every once in awhile I wouldn't be able to pull a picture or document off because of a cyclic redundancy check error. I just moved on and saved what I could. I assumed it was because the hard drive was already bad so I just moved what I could.
I am cloning my existing hard drive in my laptop (sata) to an external hard drive (pata) in preparation for installing a new larger hard drive (sata)in the laptop. Can I, or how do I transfer the cloned data from the external (pata) to the new internal hard drive (sata)? Thanks in advance and I apoligize if this is a rudimentary question as this is my first time attempting something like this.
View 6 Replies View RelatedI can not access hard disk properties because Windows Explorer hangs whenever I Right click on a hard drive icon. I am running WXP pro SP2 completely up to date with updates.
View 1 Replies View RelatedA problem has been detected and Windows has been shut down to prevent damage to your computer.If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps.Check for viruses on your computer. Remove any newly installed hard disks or hard drive controllers.Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
View 4 Replies View RelatedI am facing two problems with my lap top hp campac presario 2100.
1.The loptops battery to be changed. I dont know how many batteries are there. Any cmos battery there like any other pc. Pl advice. What would be the cost. and the model number . The hard disk requires replacement. I want to know the model numberor exact type of hard disk would be fit in. and the cost thereof.3. Windows xp home edition has been preloaded in the laptop. How to take a copy of the os and copy in the new hard disk. I have the serial number etc for the OS.
how do you see how much hard drive, C: space you have and how much you have available
View 1 Replies View RelatedWhen installing a larger main drive, how do I get the drivers copied onto the slave before I take out the main one I wonder is there a simple way of doing this, I am using Windows XP home edition, the PC is an oldish one and isn't any specific make, so I can't get any clever programs from the manufacturers site
View 3 Replies View RelatedI use Cobian Backup to produce a zip-file containing all files and folders, except for temporary-folders (I added an exclude-filter), of my system.Before I can rely on this method, I need to find a way of restoring the 27 gb zip-file, which I store on a networked drive, easily. how booting up a laptop with a formatted harddrive, be able to access a network-drive and extract all the contents of the networked zip-file to the hard drive?
View 14 Replies View Related