Cannot Recognize On SATA Hard Drive - Hardware Configuration Problem
Mar 10, 2005
I just built my first computer (specs in signature) with a SATA hard drive. I put the windows XP Pro CD and it formatted my Hard drive the it installed windows, but it says that windows could not start due to a hardware configuration problem. Is there some special thing I need to set to get it to boot from the drive or what?
I have an HP Media PC M400Y. It is a P4 3.0 Ghz with 1GB ram. It originally came with MCE2002. Last week I upgraded to MCE2005 to use the media extender feature with my new X-box 360. Here is the problem and some background.
About a year ago, I had installed a second SATA hard drive, Seagate Baracuda 300GB, model ST3300831AS. This drive was plug and play into the motherboard and never had any issues. Before reformating the main C: drive, I moved all my valuable data on the SATA drive.
I then turned the PC off, removed the power and signal cables from the SATA drive. (I'm a novice, and didn't want to take any chances of erasing the SATA drive, while reformating the main C drive)
I've got this old mobo Abit VT7. I want to install XP on it. However, the XP disc doesn't recognize SATA hard drives. So I downloaded official SATA driver from the Abit website http://tinyurl.com/kua5qz and tries to slipstream my XP disc following the instructions set forth here http://tinyurl.com/37anvn . I am not too clear how to incorporate the drivers from the official drivers, but Nlite seems to be able to find the drivers once I pointed it to the top unzipped driver directory, and I selected the XP folder for it. However, the newly created XP disc still fails to recognize the SATA hard drives. Alternatively, I believe I could have a boot floppy which would load the drivers in, then I launch the setup in the XP installation CD via command line. But I don't know how to create a boot disc which has those SATA drivers in.
i have a hp compaq dc7100 it has a sata hard drive in it, i need the drivers for it, not able to load xp on in locks up, i do not have the drives, i checked with hp not able to find.
Just bought a 300Gig Maxtor SATA hard drive. My supports the connection onboard. How do I get Windows XP pro to reconized the full 300Gigs and not just 137Gigs. I have a Intel(R) Desktop board D85GVHZ Base System Intel(R) Celeron CPU 3.06Hz 512MB of ram.
I wasn't sure where this thread should be placed. I want to install XP and it wouldn't detect my hard drive. Since I have no floppy drive I want to slipstream a xp cd with the drivers already there. I am using the program nLite to make the bootable disc. However the problem is that I can't find the drivers or i'm unsure what is correct. My controllers are... Intel(R) 82801HEM/HBM SATA AHCI Controller Intel(R) ICH8M Ultra ATA Storage Controllers 2850.. But chipset is Mobile Intel(R) 965 Express Chipset Family.
My motherboard died and I had my files password protected in Windows XP Media Edition, can I connect the SATA hard drive to another PC via USB and unlock the protected files, or does it have to run as the main drive to allow access and entry of password and then making all files public?
So I was bored today and began creating a old Pentium 4 System out of old PC parts around the house.Now, I have assembled everything and have tested all the parts and all are working fine, However when I go to install Windows XP on the machine it will not detect the Hard Drive (On the Partition Screen). Now I thought it may be a hard drive problem so I connected the hard drive up to my current PC and ran the XP Installation fine.However, Now when I try to boot the XP I installed on the hard drive off of my other system it will get to the splash screen and restart, so I turned off automatic restart on system failure and I get the 0x0000007B Stop error.
So I retried the XP installation on the system again, got to the Partition and Hard Drive selection screen and still no Hard Drive to be seen, I plugged in a USB and it detected it fine.I have tried booting in safe mode & every option under F8, However it just restarts on the XP splash screen, And as I said the hard drive seems fine as it comes up in bios and my main PC ran it fine, So I'm beginning to think that i'm in need of my motherboards SATA Drivers or something.
I have a primary drive (maxtor) whice xp is running on and a second hard drive (maxtor also) which i have been using for some time for storing files. i had windows xp home and everything worked fine for a long while. recently since i upgraded to xp pro, the hard drive icon for the secondary drive disappears from my computer. i even tried saving stuff to the drive from ms word or something and it is not recognized. usually a restart will solve the problem, but after i let the computer run, (till like the next day) it will happen again. i dont know yet what event causes it to dissapear. i sometimes use standby, but i dont think that is consistent with the problem
I recently bought a new system with XP home already installed. Now I find that I should have installed the new SATA hard drive for better perfomance with my new P4 dual layered processor. I have ordered the new SATA 80 GB drive and would expect that when I install the XP on it I will have to call microsoft to activate it on the hard drive (since it was originally installed on the hard drive that I got with the new system). Any issues here or just call and explain the upgrade during the activation? (Understood that I will have to reinstall my other software again) As a follow up to this, would there be any problem slaving the original drive on the same IDE ribbon as the new SATA drive?
I'm can't get WinXP installation to find my Sata Hard-drive. I'm running Suse Linux on my IDE-HD and I could also had no problems getting my Suse 10.1 installation to install on the SATA-HD. I've booted up with winxp media install disk and tried to use the F6 key at the right time but nothing happens so it keeps going until I get to the point where I can press the S key to install SATA RAID driver from disk that came with my motherboard. The drivers install but then windows install still says no disk to install windows... I don't get it.
I've checked my bios and SATA in there, in fact the first thing I see when I boot up in the boot sequence is the SATA drive. Linux knows it's there but windows install doesn't. I installed XP on a WD SATA drive before and all I had to do was press F6 to install the controller from the XP disk but that doesn't work now.
I'm not completely computer illiterate but i have never set-up a dual or triboot system before.I want to triboot XP Pro, Vista Home Premium and Ubuntu. I have a brand new 500GB SATA hard drive which is straight out of the box. I don't have vista yet but plan on getting it soon (when the next service pack is released) and don't want to have to reformat my hard drive when i do. So i thought it would be better to prepare for it now
I just bought me a new SATA 250GB Hard Drive and a external hard drive enclosure. I received the items today and I just realize the hard drive enclosure doesn't build into the way to connect to the SATA 7-pin data connector. All it has is the Parallel ATA 40-pin data connector. Can anyone recommend any external hard drive enclosure that can connect to SATA connector directly. And there is a main reason why I choose a SATA hard drive.
I want to install Windows XP on a new SATA HDD drive. The computer in question came with Windows Vista installed. There is no IDE option in the BIOS. There is no floppy drive on the unit. So it looks like I might have to slipstream all the drivers, etc., on to the unit (which I have no clue how to do). I do not have the motherboard make or model number, nor do I have the motherboard CD. My business partner is trying to take the cover off the laptop as we speak, but we're having trouble getting it off. Thus, as of now, we can't identify the motherboard manufacturer or the serial number.
Can anyone here point us in the right direction? The computer in question is a Compaq Presario c769us (laptop). It was purchased in June 2008. This all started when my business partner decided to use a Vista System Recovery CD to overwrite the existing copy of Vista that he had on the computer. After he ran the disk, the system stopped working. So right now, we have the old hard drive, which contains a non-working copy of Vista on it (which we can 't delete), and we have the new hard drive (a 250 GB Hitachi). So maybe we could just delete the copy of Vista on the old hard drive - the self drive test checked out okay on the old hard drive. So I guess the two options are - figure out a way to put XP on the NEW hard drive, or figure out a way to put XP on the OLD hard drive and delete Vista from it first. If we can put XP on the old hard drive and remove Vista from it, we could take the new hard drive back, and get our money back, too.
My old IDE hard drive went out on me so i went and bought a 500g WD SATA hard drive. When I put the windows installation disk in it does not recognize my SATA hard drive. after looking into it online, i found that alot of people had this issue. I read a few suggestions and tried them, (using the F6 function during install with drivers on a floppy disk, and streamlining drivers intot he windows installation disk itself using NLite), and none of them seem to work. I then used my friends old IDE hard drive, installed windows, and used a program to make a disk image of my hard drive and transfer it to my SATA drive. This didnt work either. I havn't fiddled with drive letters, (you know c: and e: and so on) i am thinking this may help but I am not sure. It is not a boot order issue i know how to do all that and nothing works. I am looking for a way to get Windows XP onto my SATA drive. (yes my mother board detects my SATA drive, and it is showing up in windows i just cant seem to get windows on it.)
I would prefer to just copy it from my IDE drive since i have already installed all the updates so if this is possible please let me know.If you know what kind of boot disk i need for windows xp installation to recognize my sata drive during installation that would be a big help too. (i have tried sata controller drivers for my motherboard, i tried using the software that came with my hard drive, and this too didn't work.)
I was told I could take a hard drive from a windows 98 computer and the person is buying a new Windows xp so I can hook up the win 98 hard drive as a slave to the new computer with win xp so I can drop and drag or cut and past files that they want off the 98 hard drive put on their new computer. Now If their new computer with the win xp on it, if there is an ide cable going to the hard drive and nothing else then I can hook up the win 98 hard drive to the same ide cable as a slave and no problem.
However if the windows xp computer has the hard drive on the ide cable and also the cd-rom then is it ok just to hook up another ide cable to their mother board and hook the hard drive from the windows 98 computer on the end of that ide cable as the master? and by turning the computer off, and then hooking up the hard drive and then turning the computer back on it should reconize the windows 98 hard drive in my computer right away right?
If I would have to put the windows 98 hard drive in the new computer on a seperate ide cable is it ok to have it as master? cause the hard drive that is already in it would be master to but it would be on a different ide cable. I am hoping the new computer just has the hard drive on an ide cable by itself so I can just hook the other one up as a slave and get the files and be done with it. How ever if someone could give me a couple or three scenario's with ide cables and hooking this up I would be very much appreciatetive.
I am trying to install XP Pro. After I boot from the CD everything looks good until it's time to select which HD to install in. It won't recognize it, I've found out there are multiple problems with these new large HDs. People talk about the 137 gigs limit, upgrading the drivers via Floppy, even customizing an installation CD image with an 'OEM' folder below i386. I've tried many things but still can't have it recognized. This box doesn't come with a floppy and I don't have one. Why the freaking dependability on a floppy drive.
I would like to have a go at this slipstreaming thing, since I cannot install Windows XP Pro (it's a retail version from my desktop pc, which I'm now getting rid of) on my Toshiba laptop - it won't recognize the hard drive. I know how to do it, but I don't know which files (SATA drivers) to include in it. The harddrive is new (didn't come with the laptop) and it's a Samsung HM120JI, but it seems to be compatible, since the recovery disk worked fine and I am now running Windows XP home edition.
I'm connecting a 30GB Travelstar Hard Drive via an external USB 2.0 case to my Thinkpad T40 with Windows XP (pro). Windows immediately recognized it. However, the hard drive does not show up under Windows Explorer. I can go into Device Manager, click on Disk Drives, and it does show the new drive there (along with my main hard drive, which is a 80 GB hard drive).
I cannot figure out how to make it show up in Windows Explorer with an Drive Letter assigned to it and thus, how to actually use it.
I have a laptop which after I purchased it and installed my own backup utility and created an image. I then started my windows xp home eddition with the cd and went to the section to redo the partitions. I deleted the partion for the recovery however after doing so it is not shown as unpartiton space. The system should have 80 gb hard drive however the statement above the partion says only 75gb is available to use. This is the same total as on the control panel / disc management. How can I get XP to recognize the entire hard drive space?
Well i tried to install windows on a used 80gig hd. It ended up hanging at the Setup is inspecting your computers hardware configuration. So i searched around a bit and it said my hd needed to be repartitioned so i said instead of that id go out and buy a new 500gig that was only 80 dollars. So i put the hd in and tried with this and it still hangs at teh same screen. For some reason i cannot get passed the "Setup is inspecting your computers hardwear configuration" screen. I then put in another CD of windows but the 64 bit version to try that one to see if it were the CD that were bad. And it went straight into the setup but then did not recognize my harddrive was there.
I've got a very annoying problem with XP that I just can't figure out. I have spent hours and hours trying to fix this and posted on several forums to no avail, so any help would be much appreciated.My laptop died last week when I spilt water all over it. The harddrive was not effected and stayed completely dry.I am basically trying to save the data on the harddrive and completely wipe/format it.
I bought a 2.5" SATA > USB enclosure/caddy and put my laptop HDD into the enclosure. When I plugged the enclosure into my spare PC using the power/USB Y cable, the enclosure powers up and the LED light comes on. I can also feel/hear the laptop HDD inside spinning. A message comes up on the PC saying "New hardware found; USB mass storage device".
I am running XP Pro on my computer. On another drive I have windows 7. My computer stopped booting to my XP drive all of a sudden, but it would let me boot to my Windows 7 drive. That lasted for about 3 days. Now I can't boot to either drive. When I start the computer it says there is no HDD. I tried to use the XP disk to repair, that didn't work., so I thought I'd do an XP install. But my hard drive doesn't show up all the time. Or it will show the HDD but upon trying to pick a partition to set up XP in, it then tell me there is no HDD. I get the blue screen of death, and have to manually force a shut down. Other times it tell me that the HDD is RAW, and it needs to be formatted. How can I get the HDD to format? Is there a way to do it through DOS. Sometimes I can't even get to the DOS prompt. The bootup section is corrupt. I need to repair it, but can't if the system doesn't see my HDD.
I have a maxtor hard drive SATA 200GB as my main drive and a second drive D. Very recently when I have noticed that my computer took longer to boot into windows. Applications seem to take a bit longer than usual to load. I have XP SP2 installed. I defragment my drive every few weeks so its not a defragment problem however when I try to defrag it now, it takes many times longer to do so. Also for a scan disk of C: (chkdsk on boot) it took 6 hours to get to about 25%. So there must be a problem. I can hear the hard drive loading sound for a few seconds and then there is a very long pause maybe about 10-20 minutes. It should only take a few hours the last time i did it maybe about 5 hours. Something is wrong.
When I transfer a large file like 1gb into my drive D it takes 15 minutes. Which is a bit long for a SATA enabled hard drive. I have had this drive for about 2 years now and it has never gone this slow before. I have downloaded the seatools from the maxtor website which diagnoses the drive. The tool ran slow but my hard drive passed the tests. Also when I ran that scan disk, it did say there was a mirror copy of something and also some other things. I think it had the word security in it so it deleted somethings. It mentioned indexes and some files. I forgot most of it.
I have checked my D drive and it is running fine and unaffected. Also I noticed during bootup that on the windows logo screen, the one with the bar moving from left to right that it freezes for about 5 seconds somewhere near the end of its loading. Then my keyboard lights come on (recognises keyboard). Later after the logo disappears, the screen is black for about 1-2 minutes and the hard drive periodically stops loading then starts loading something. This also happens when the welcome blue background screen comes on which is making boot times slow. Also happens when I shut down. There are some periods of hard disk inactivity.
I've been using an USB enclosure successfully for some time with no problem. I upgraded to a Maxtor 100 gig in the same enclosure. When turned on it does the "plug and play" chimes and it shows up in the device manager as installed and working properly. But it is not shown in My Computer as a drive letter.
Dell dual core, 1 gig RAM, Windows XP service pack 2
At first I thought it was BIOS not autodetecting my HDrive capacity. But in the setup screen it indicates the correct size.However, in WindowsXP-My Computer, it still says my harddrive is 20GB rather than 40GB.
I have a new samsun 120 GB hard drive that I have placed into two seperate external enclosures connected to my dell pentium 4 win XP computer via USB. My computer will not recognize the hard drive. It powers up fine? Any ideas of what to do next?
my external hard drive all of a sudden stopped showing up in "my computer" and a can't find it anywhere else. it make the hardware sound when I plug it in but nothing shows up. when I plug it in another port it comes up with a message saying "USb device not recognized. one of the usb device attached to this computer has malfunction and windows cannot recognize it
Well I have an hard drive into a external enclousure but the windows XP of a new CPU do not finish detect it when I connect it. But the same external hard drive work fine in my laptop. I formated my CPU 2 times, but i got the same error of Windows. My CPU has a new motherboard Foxconn M7VMX-K.
The USB ports work fine with my pendrive.
In my computer i can see a new hard drive with a letter (K, whithout data.
The Windows XP Administrator Disk doesn't show nothing about the external hard drive.