Does Not Recognize Full Capacity Of Hard Drive
Dec 22, 2006
I have a laptop which after I purchased it and installed my own backup utility and created an image. I then started my windows xp home eddition with the cd and went to the section to redo the partitions. I deleted the partion for the recovery however after doing so it is not shown as unpartiton space. The system should have 80 gb hard drive however the statement above the partion says only 75gb is available to use. This is the same total as on the control panel / disc management. How can I get XP to recognize the entire hard drive space?
View 5 Replies
ADVERTISEMENT
Aug 10, 2010
Two weeks ago I installed win7 on my system,but 3 days ago,bacause of some problems,I decided to uninstall it and to setup an older version.But unfortunately I had many problems to setup another one.Although I had the related DVD in DVD drive,after some seonds it asked for the DVD labeled Win XP.Anyhow finally I could setup win XP 2002,but windows only recognizes drive C with capacity of 100GB and I don't have my other drives as before.For your information it's NTFS.I decided to setup Win7
View 1 Replies
View Related
Nov 29, 2006
At first I thought it was BIOS not autodetecting my HDrive capacity. But in the setup screen it indicates the correct size.However, in WindowsXP-My Computer, it still says my harddrive is 20GB rather than 40GB.
View 3 Replies
View Related
Nov 4, 2008
I used to have dual boot of Ubuntu, Fedora, and WinXP but today I remove the Fedora and Ubuntu. When I add the Unallocated space in Partition Magic it shows the drive at 95GB but in my computer or in disk management it is only showing the capacity as 72GB how can I get this other 23GB to show in WinXP?
View 12 Replies
View Related
Nov 12, 2006
I was looking at a Lenovo desktop that comes with a 19' LCD, and noted that the full screen was not being used by XP. Are there settings in XP that would use the full screen capacity of the 19' LCD, or does XP only use a portion of the total screen area no matter what parameters are changed?
View 6 Replies
View Related
Mar 12, 2006
My computer is running at 100% full capacity all of the time. As you can imagine, this makes things run very slowly. Any ideas of what could be causing this problem? My task manager has unfortunately stopped showing processes, and no programs are running when the capacity shows 100% usage.
I'm using a dell inspiron 8000, Windows 2000, Pentium III.
View 1 Replies
View Related
Feb 11, 2009
I'm at my wits end. I was queried by my computer to clean up my hard drive because it was full. ( I wasn't downloading anything).This seemed very odd to me as I always clean up my hardrive regularly.I usually defrag my hardrive every few weeks and the last time I did it I had 29% free space. Now when I check it I have 0% free space and the hard drive has over 20000 fragmented files, I've never seen it look like this.I ran spyware and came back no threats.Something has filled up my hardrive unexplainable.I've tried a lot of things from system restore to chkdsk.
View 9 Replies
View Related
Jun 25, 2005
I have a primary drive (maxtor) whice xp is running on and a second hard drive (maxtor also) which i have been using for some time for storing files. i had windows xp home and everything worked fine for a long while. recently since i upgraded to xp pro, the hard drive icon for the secondary drive disappears from my computer. i even tried saving stuff to the drive from ms word or something and it is not recognized. usually a restart will solve the problem, but after i let the computer run, (till like the next day) it will happen again. i dont know yet what event causes it to dissapear. i sometimes use standby, but i dont think that is consistent with the problem
View 4 Replies
View Related
Nov 4, 2009
My hard drive crashed and I replaced it with a new 500G hard drive. I reloaded Windows XP and I'm using the new hard drive as my main drive. It only shows that I have 137G Total size of the drive. How do I get it see all of the 500G hard drive?
View 4 Replies
View Related
Apr 30, 2006
AOL Check Up says my Hard Drive is over 85% full, and to get rid of some files. How and which files should I get rid of?
View 6 Replies
View Related
Jun 21, 2005
I have a 40GB hard drive with Windows 98 installed. Today I upgraded to XP and find that my hard drive is almost full. This can't be right.
View 5 Replies
View Related
Feb 2, 2009
My girlfriend's laptop has had hardly any space on it for a long time. It's 120GB with about 105GB of useable space. After selecting all items (including hidden) in the C drive, and clicking properties, the collective size is 51GB. However, when I click properties on the C drive from 'My Computer' it says Used Space: 101GB. Free Space: 4.36GB. I don't know what happened to the other 54GB.I saw a similar problem on this site, and it was resolved by turning off system restore. I tried this and it only freed and extra 3 or so GB. This is a really frustrating problem and I haven't a clue what to do next.
View 11 Replies
View Related
Sep 11, 2009
I have an Acer Aspire notebook, w/ 37 gig hard drive partitioned into two drives. D (backup, archive) is 98% empty. C (everything else) is91% full. Windows NT will not let me defragment the heavily fragmented C partition for lack of minimum 15% free space on the drive. How can I go in and reasign the drive sizes, without dumping everything and reformating? I'm handy with a power tool, but computers frustrate me.
View 11 Replies
View Related
Jan 25, 2007
I have an HP Media PC M400Y. It is a P4 3.0 Ghz with 1GB ram. It originally came with MCE2002. Last week I upgraded to MCE2005 to use the media extender feature with my new X-box 360.
Here is the problem and some background.
About a year ago, I had installed a second SATA hard drive, Seagate Baracuda 300GB, model ST3300831AS. This drive was plug and play into the motherboard and never had any issues. Before reformating the main C: drive, I moved all my valuable data on the SATA drive.
I then turned the PC off, removed the power and signal cables from the SATA drive. (I'm a novice, and didn't want to take any chances of erasing the SATA drive, while reformating the main C drive)
View 8 Replies
View Related
Aug 6, 2005
I was told I could take a hard drive from a windows 98 computer and the person is buying a new Windows xp so I can hook up the win 98 hard drive as a slave to the new computer with win xp so I can drop and drag or cut and past files that they want off the 98 hard drive put on their new computer. Now If their new computer with the win xp on it, if there is an ide cable going to the hard drive and nothing else then I can hook up the win 98 hard drive to the same ide cable as a slave and no problem.
However if the windows xp computer has the hard drive on the ide cable and also the cd-rom then is it ok just to hook up another ide cable to their mother board and hook the hard drive from the windows 98 computer on the end of that ide cable as the master? and by turning the computer off, and then hooking up the hard drive and then turning the computer back on it should reconize the windows 98 hard drive in my computer right away right?
If I would have to put the windows 98 hard drive in the new computer on a seperate ide cable is it ok to have it as master? cause the hard drive that is already in it would be master to but it would be on a different ide cable. I am hoping the new computer just has the hard drive on an ide cable by itself so I can just hook the other one up as a slave and get the files and be done with it. How ever if someone could give me a couple or three scenario's with ide cables and hooking this up I would be very much appreciatetive.
View 3 Replies
View Related
Jun 22, 2008
I am trying to install XP Pro. After I boot from the CD everything looks good until it's time to select which HD to install in. It won't recognize it, I've found out there are multiple problems with these new large HDs. People talk about the 137 gigs limit, upgrading the drivers via Floppy, even customizing an installation CD image with an 'OEM' folder below i386. I've tried many things but still can't have it recognized. This box doesn't come with a floppy and I don't have one. Why the freaking dependability on a floppy drive.
View 4 Replies
View Related
Nov 21, 2007
I would like to have a go at this slipstreaming thing, since I cannot install Windows XP Pro (it's a retail version from my desktop pc, which I'm now getting rid of) on my Toshiba laptop - it won't recognize the hard drive. I know how to do it, but I don't know which files (SATA drivers) to include in it. The harddrive is new (didn't come with the laptop) and it's a Samsung HM120JI, but it seems to be compatible, since the recovery disk worked fine and I am now running Windows XP home edition.
View 14 Replies
View Related
Mar 7, 2005
Dell 4500 with 256mb RAM 40 gB hard drive. Son tries to load game and system says not enough memory. Only 4gB free. I update ZA, Spybot, Adaware and Norton and run everything. Find 3 non-viral potential threats through NAV. update spywareblaster. Run diskcleanup and empty temp internet files. These are all things I do regularly (not every day but more than twice a wweek) and I backup to external drive once a month at least
View 14 Replies
View Related
Jan 8, 2006
I just did a partial run of BCwipe, just 2 scans, because I had to shut the computer down and now my hard drive is full!! Before using BCwipe, I had at least half of the drive free. What happend and what can I do now?
View 5 Replies
View Related
Jan 24, 2006
I have several thousand fragments of files from using system restore on Windows XP Professional that cannot be defragmented from my hard drive. I only have fifteen percent of free space left and that was after I removed several programs. Disk cleanup only heleped minimally.
View 9 Replies
View Related
Feb 7, 2010
Hi. My problem is similar to this one here
http://forums.cnet.com/5208-12546_102-0.html?threadID=295044
Except I am not running Vista and don't have AOL on there.
Also, I don't think my drive is actually full, or if it is, it's because of something that Sonic or Windows did.
I have a bunch of computers. This Dell laptop, Inspiron E1505, is one I primarily use to watch DVD's or online shows. There were a lot of programs installed, because I used to use it regularly, and then I loaned it to someone for about a year. It had very few files in terms of documents, pictures, music, or videos, because I had cleaned all that out before I loaned it to her, and I got a new laptop, and so only use this one to watch DVD's. Also, I should mention it has a fairly new DVD recorder because the old one died a few months back.
Sometimes I use this laptop to burn or copy disks, which is what I have been doing the past two days, using the program Sonic Digital Media LE v7, which came preinstalled. It was working fine copying dvd's (legal copies of ones I recorded myself) until yesterday, when it suddenly said that my hard drive was full and to free up "0 kb" in order to proceed.
When I close the program after this error, it gives me three crash messages (every time).
First one says MediaHub.exe application error.
The instruction at "0x0035afd0" reference memory at "0x35171ae8". The memory could not be "written". Click on OK to terminate the program."
The next error is almost exactly the same but gives all the numbers as 0x00000000.
The third error is Microsoft Visual C++ RUntime Library Runtime Error! program: mediahub.exe
R6025 - pure virtual function call.
At first, rebooting helped this problem, but then I got the error again. So I ran disk cleanup. It took a really long time and then the pc turned itself off. I turned it back on and it said that the pc had overheated because the fan vents were blocked. The vent is on the bottom, and was very dirty (possibly because my friend was a heavy smoker), so I wiped it off with a damp napkin. I rebooted and ran disk cleanup again. I was able to copy disks again until it gave me the error again. Every time I go to the C drive and check the disk free space, it gives me very little there, but I know that it's not because of any files I have on there.
Anyway, I also uninstalled all of the unimportant programs and deleted any extra files I could find. I want to run check disk, but I got an error message and it said it would run it next time I rebooted (that didn't help and check disk still didn't run, and still wouldn't run next time I tried it). I tried to run disk defragmenter, but it said I only had 5% hard drive space left and it needs 15%. I ran it anyway, and it seemed to work, and I was able to copy more disks.
Now I am getting that error message again.
I am running disk cleanup again, compressing old files, so we'll see if that works. I haven't tried System Restore yet, will try that one next. I really would rather not reinstall Windows.
Thanks for any suggestions!
Suzanne Lanoue
View 6 Replies
View Related
Mar 18, 2006
I'm connecting a 30GB Travelstar Hard Drive via an external USB 2.0 case to my Thinkpad T40 with Windows XP (pro). Windows immediately recognized it. However, the hard drive does not show up under Windows Explorer. I can go into Device Manager, click on Disk Drives, and it does show the new drive there (along with my main hard drive, which is a 80 GB hard drive).
I cannot figure out how to make it show up in Windows Explorer with an Drive Letter assigned to it and thus, how to actually use it.
View 6 Replies
View Related
Jun 7, 2008
Well i tried to install windows on a used 80gig hd. It ended up hanging at the Setup is inspecting your computers hardware configuration. So i searched around a bit and it said my hd needed to be repartitioned so i said instead of that id go out and buy a new 500gig that was only 80 dollars. So i put the hd in and tried with this and it still hangs at teh same screen. For some reason i cannot get passed the "Setup is inspecting your computers hardwear configuration" screen. I then put in another CD of windows but the 64 bit version to try that one to see if it were the CD that were bad. And it went straight into the setup but then did not recognize my harddrive was there.
View 3 Replies
View Related
Oct 28, 2008
I've got a very annoying problem with XP that I just can't figure out. I have spent hours and hours trying to fix this and posted on several forums to no avail, so any help would be much appreciated.My laptop died last week when I spilt water all over it. The harddrive was not effected and stayed completely dry.I am basically trying to save the data on the harddrive and completely wipe/format it.
I bought a 2.5" SATA > USB enclosure/caddy and put my laptop HDD into the enclosure. When I plugged the enclosure into my spare PC using the power/USB Y cable, the enclosure powers up and the LED light comes on. I can also feel/hear the laptop HDD inside spinning. A message comes up on the PC saying "New hardware found; USB mass storage device".
View 4 Replies
View Related
Aug 19, 2009
I am running XP Pro on my computer. On another drive I have windows 7. My computer stopped booting to my XP drive all of a sudden, but it would let me boot to my Windows 7 drive. That lasted for about 3 days. Now I can't boot to either drive. When I start the computer it says there is no HDD. I tried to use the XP disk to repair, that didn't work., so I thought I'd do an XP install. But my hard drive doesn't show up all the time. Or it will show the HDD but upon trying to pick a partition to set up XP in, it then tell me there is no HDD. I get the blue screen of death, and have to manually force a shut down. Other times it tell me that the HDD is RAW, and it needs to be formatted. How can I get the HDD to format? Is there a way to do it through DOS. Sometimes I can't even get to the DOS prompt. The bootup section is corrupt. I need to repair it, but can't if the system doesn't see my HDD.
View 8 Replies
View Related
Apr 7, 2010
I have spent a long time struggling with Windows over different errors, which all lead back to page file problems, which ultimately all led back to my RAM. I found this out after XP's system file went irreparably corrupt, when my hackintosh (installed on a different hard drive) started experiencing the same problems.Bad RAM has been removed, and I'm trying to reinstall XP. I formatted the drive using OSX's Disk Utility program, wrote zeros to the entire surface, and partitioned it in FAT32 (Disk Utility can not format to NTSC).When I use my CD to reinstall Windows, it does not read the full drive. It instead offers to install XP on a 130gb drive where my 640gb drive is. If I follow it through, it installs just fine, but it formats my 640gb drive to only have one usable NTSC partition of 130gb.The last time I attempted this, I removed every drive and storage device from my computer except for the 640gb drive and the same thing still happened.
View 5 Replies
View Related
Dec 1, 2008
My brother recently bought a new HP desktop PC so he wants to sell his old laptop (Compaq Presario 700, Windows XP Home Edition) and we both agreed we should do a full restore to completely wipe the hard drive clean to it's original slate and we have the original Compaq ''QuickRestore'' discs and for whatever reason, they're not working. There is three CD's and not a single scratch or mark on any of them. I've tried to run all three on the laptop and the only thing that happens is that the folder containing the discs files on it is what pops up and no actual setup occurs like it says on the little piece of paper that comes with the CD's.
View 1 Replies
View Related
Nov 24, 2009
Your hard drive is suddenly full and you are left wondering where did all my free space go? Now you must begin the task of deleting old files and folders to reclaim space but where do you start? In the past I would suggest manually checking the sizes of all of your folders so you know where to begin the hunt but now there is a great utility called WinDirStat that does the work for you. After inspecting a drive you are shown exactly how much data is in each folder, what file types are taking up the most space and even a visual representation of the files on your disk
View 9 Replies
View Related
Jun 23, 2005
This forum has been incredibly helpful, and now I must ask another "ignorant" question to maintain my computer loving insanity. I recently acquired a used laptop running XP Home. I use Pro for work, so I thought it wise to install Pro over the top of the the former owners' OS and thereby effectively delete his old files etc. Well, what I found was that Windows simply imported the old OS info right into the new install, leaving folders, files and programs I didn't want on the hard drive. So my question for you guys and gals is this. How do I destroy everything on my hard drive, then make the laptop (without floppy drive available), accept the reloading of my XP Pro CD? It is a full OEM version by the way. If I can format the HD, and have BIOS boot from CD-ROM, will I have a "fresh" CD-only install at that point, or will there still be little goblins of information running around in my system
View 14 Replies
View Related
Feb 12, 2006
I've been using an USB enclosure successfully for some time with no problem. I upgraded to a Maxtor 100 gig in the same enclosure. When turned on it does the "plug and play" chimes and it shows up in the device manager as installed and working properly. But it is not shown in My Computer as a drive letter.
Dell dual core, 1 gig RAM, Windows XP service pack 2
View 4 Replies
View Related
Sep 12, 2009
Oem disc auto partions any hdd as 16GB os fat 32/D:\ drive NTFS raw. The Sony OEM disc(s) are pre sp1.
What steps do I take to install and get the full 200 GB to bea recoginized correctly?
View 1 Replies
View Related
