Windows And Sonic Keep Saying My Hard Drive Is Full
Feb 7, 2010
Hi. My problem is similar to this one here
http://forums.cnet.com/5208-12546_102-0.html?threadID=295044
Except I am not running Vista and don't have AOL on there.
Also, I don't think my drive is actually full, or if it is, it's because of something that Sonic or Windows did.
I have a bunch of computers. This Dell laptop, Inspiron E1505, is one I primarily use to watch DVD's or online shows. There were a lot of programs installed, because I used to use it regularly, and then I loaned it to someone for about a year. It had very few files in terms of documents, pictures, music, or videos, because I had cleaned all that out before I loaned it to her, and I got a new laptop, and so only use this one to watch DVD's. Also, I should mention it has a fairly new DVD recorder because the old one died a few months back.
Sometimes I use this laptop to burn or copy disks, which is what I have been doing the past two days, using the program Sonic Digital Media LE v7, which came preinstalled. It was working fine copying dvd's (legal copies of ones I recorded myself) until yesterday, when it suddenly said that my hard drive was full and to free up "0 kb" in order to proceed.
When I close the program after this error, it gives me three crash messages (every time).
First one says MediaHub.exe application error.
The instruction at "0x0035afd0" reference memory at "0x35171ae8". The memory could not be "written". Click on OK to terminate the program."
The next error is almost exactly the same but gives all the numbers as 0x00000000.
The third error is Microsoft Visual C++ RUntime Library Runtime Error! program: mediahub.exe
R6025 - pure virtual function call.
At first, rebooting helped this problem, but then I got the error again. So I ran disk cleanup. It took a really long time and then the pc turned itself off. I turned it back on and it said that the pc had overheated because the fan vents were blocked. The vent is on the bottom, and was very dirty (possibly because my friend was a heavy smoker), so I wiped it off with a damp napkin. I rebooted and ran disk cleanup again. I was able to copy disks again until it gave me the error again. Every time I go to the C drive and check the disk free space, it gives me very little there, but I know that it's not because of any files I have on there.
Anyway, I also uninstalled all of the unimportant programs and deleted any extra files I could find. I want to run check disk, but I got an error message and it said it would run it next time I rebooted (that didn't help and check disk still didn't run, and still wouldn't run next time I tried it). I tried to run disk defragmenter, but it said I only had 5% hard drive space left and it needs 15%. I ran it anyway, and it seemed to work, and I was able to copy more disks.
Now I am getting that error message again.
I am running disk cleanup again, compressing old files, so we'll see if that works. I haven't tried System Restore yet, will try that one next. I really would rather not reinstall Windows.
Oem disc auto partions any hdd as 16GB os fat 32/D:\ drive NTFS raw. The Sony OEM disc(s) are pre sp1. What steps do I take to install and get the full 200 GB to bea recoginized correctly?
I'm at my wits end. I was queried by my computer to clean up my hard drive because it was full. ( I wasn't downloading anything).This seemed very odd to me as I always clean up my hardrive regularly.I usually defrag my hardrive every few weeks and the last time I did it I had 29% free space. Now when I check it I have 0% free space and the hard drive has over 20000 fragmented files, I've never seen it look like this.I ran spyware and came back no threats.Something has filled up my hardrive unexplainable.I've tried a lot of things from system restore to chkdsk.
My hard drive crashed and I replaced it with a new 500G hard drive. I reloaded Windows XP and I'm using the new hard drive as my main drive. It only shows that I have 137G Total size of the drive. How do I get it see all of the 500G hard drive?
My girlfriend's laptop has had hardly any space on it for a long time. It's 120GB with about 105GB of useable space. After selecting all items (including hidden) in the C drive, and clicking properties, the collective size is 51GB. However, when I click properties on the C drive from 'My Computer' it says Used Space: 101GB. Free Space: 4.36GB. I don't know what happened to the other 54GB.I saw a similar problem on this site, and it was resolved by turning off system restore. I tried this and it only freed and extra 3 or so GB. This is a really frustrating problem and I haven't a clue what to do next.
I have an Acer Aspire notebook, w/ 37 gig hard drive partitioned into two drives. D (backup, archive) is 98% empty. C (everything else) is91% full. Windows NT will not let me defragment the heavily fragmented C partition for lack of minimum 15% free space on the drive. How can I go in and reasign the drive sizes, without dumping everything and reformating? I'm handy with a power tool, but computers frustrate me.
Dell 4500 with 256mb RAM 40 gB hard drive. Son tries to load game and system says not enough memory. Only 4gB free. I update ZA, Spybot, Adaware and Norton and run everything. Find 3 non-viral potential threats through NAV. update spywareblaster. Run diskcleanup and empty temp internet files. These are all things I do regularly (not every day but more than twice a wweek) and I backup to external drive once a month at least
I have a laptop which after I purchased it and installed my own backup utility and created an image. I then started my windows xp home eddition with the cd and went to the section to redo the partitions. I deleted the partion for the recovery however after doing so it is not shown as unpartiton space. The system should have 80 gb hard drive however the statement above the partion says only 75gb is available to use. This is the same total as on the control panel / disc management. How can I get XP to recognize the entire hard drive space?
I just did a partial run of BCwipe, just 2 scans, because I had to shut the computer down and now my hard drive is full!! Before using BCwipe, I had at least half of the drive free. What happend and what can I do now?
I have several thousand fragments of files from using system restore on Windows XP Professional that cannot be defragmented from my hard drive. I only have fifteen percent of free space left and that was after I removed several programs. Disk cleanup only heleped minimally.
I have spent a long time struggling with Windows over different errors, which all lead back to page file problems, which ultimately all led back to my RAM. I found this out after XP's system file went irreparably corrupt, when my hackintosh (installed on a different hard drive) started experiencing the same problems.Bad RAM has been removed, and I'm trying to reinstall XP. I formatted the drive using OSX's Disk Utility program, wrote zeros to the entire surface, and partitioned it in FAT32 (Disk Utility can not format to NTSC).When I use my CD to reinstall Windows, it does not read the full drive. It instead offers to install XP on a 130gb drive where my 640gb drive is. If I follow it through, it installs just fine, but it formats my 640gb drive to only have one usable NTSC partition of 130gb.The last time I attempted this, I removed every drive and storage device from my computer except for the 640gb drive and the same thing still happened.
My brother recently bought a new HP desktop PC so he wants to sell his old laptop (Compaq Presario 700, Windows XP Home Edition) and we both agreed we should do a full restore to completely wipe the hard drive clean to it's original slate and we have the original Compaq ''QuickRestore'' discs and for whatever reason, they're not working. There is three CD's and not a single scratch or mark on any of them. I've tried to run all three on the laptop and the only thing that happens is that the folder containing the discs files on it is what pops up and no actual setup occurs like it says on the little piece of paper that comes with the CD's.
Your hard drive is suddenly full and you are left wondering where did all my free space go? Now you must begin the task of deleting old files and folders to reclaim space but where do you start? In the past I would suggest manually checking the sizes of all of your folders so you know where to begin the hunt but now there is a great utility called WinDirStat that does the work for you. After inspecting a drive you are shown exactly how much data is in each folder, what file types are taking up the most space and even a visual representation of the files on your disk
This forum has been incredibly helpful, and now I must ask another "ignorant" question to maintain my computer loving insanity. I recently acquired a used laptop running XP Home. I use Pro for work, so I thought it wise to install Pro over the top of the the former owners' OS and thereby effectively delete his old files etc. Well, what I found was that Windows simply imported the old OS info right into the new install, leaving folders, files and programs I didn't want on the hard drive. So my question for you guys and gals is this. How do I destroy everything on my hard drive, then make the laptop (without floppy drive available), accept the reloading of my XP Pro CD? It is a full OEM version by the way. If I can format the HD, and have BIOS boot from CD-ROM, will I have a "fresh" CD-only install at that point, or will there still be little goblins of information running around in my system
Two weeks ago I installed win7 on my system,but 3 days ago,bacause of some problems,I decided to uninstall it and to setup an older version.But unfortunately I had many problems to setup another one.Although I had the related DVD in DVD drive,after some seonds it asked for the DVD labeled Win XP.Anyhow finally I could setup win XP 2002,but windows only recognizes drive C with capacity of 100GB and I don't have my other drives as before.For your information it's NTFS.I decided to setup Win7
something really weird is happening to my pc.in my hard drive, with a size is 60 gb, i have a folder, inside my docs, that says that i have 42 gb of things. but when a look inside that folder there is nothing. i saw in each folder inside documents and setings and nothing.i saw in temps folders inside of windows folder and i ran the windows utility to clean up and mantainance of my hard drive and i got nothing as a result.i tried crap cleaner, and its usefull, but the problem persist. i dont have a lot of apps installed or mp3 org jpg, files, so i dont know how to start.
I want to install a new primary hard drive and reinstall windows xp from scratch on the new c: drive. For the moment I would also like to retain the old disc contents and the xp operating system. To try to do this I installed a second hard drive and cloned the old drive c: to the new drive f:. I created a dual boot computer by editing my boot.ini file so I could boot from either the c: or f: drive. I replaced my primary hard drive with a new drive and booted up in the f: drive. Then I cloned the f: drive back to the new c: drive creating a dual boot system. My concern now is that if I reinstall windows xp on the newly installed hard drive, the Dell installation disk will wipe out the operating system and the contents on the f: drive. Is there any way to retain the old system? I'd appreciate any help with this.
My computer os is windows XP the drive is a 30 GB when I installed it I had to format it and now I only see 2.15 gb how do get to use the entire drive I have nothing on it so if it comes to reformating to do it a differnt way I will
for some reason xp will not load on start up. I'm planning on reformatting the hard drive but i would like to get the files that i need out of there before reformating. How do you get files from a hard drive without windows being activated?
i was currently running windows as my only operating system (working perfectly) and decided to try out ubuntu. afterin installing it i decided i didn't like it so i put in my windows CD and deleated the 1st 3 partitions and combined them into a 49gb partition, formatted it and installed windows on it.this worked fine, it formatted correcly and then started copying the setup files onto partition 1, but then after it restarted it wudnt see that windows was there and wudn't continue the installation. it would just go back to asking if i wanted to install from the CD again. i was installing windows xp (no service pack) but i have done this many times with this CD and hasnt stuffed up yet.
I have two hard drives(40 GB & 160GB both internal) installed in my system. Earlier I had installed windows XP on the first hard drive (40GB) and was using second hard drive as additional storage. I had partitioned my second hard drive into 5 partitions P, Q, R, S, T. Recently I reformatted my first hard drive and reinstalled windows XP. However this has also affected my second hard drive. Now Windows shows only two drives C: (my first hard drive) and D: (second hard drive) as only one partition each. Moreover it is not showing any data on the second hard drive. I want to get back my parition info and data on the second hard drive. I thought that formatting my first drive will not affect second drive and therefore didn't take back up of the second drive. What shall I do to get back my data and partition info.
My old IDE hard drive went out on me so i went and bought a 500g WD SATA hard drive. When I put the windows installation disk in it does not recognize my SATA hard drive. after looking into it online, i found that alot of people had this issue. I read a few suggestions and tried them, (using the F6 function during install with drivers on a floppy disk, and streamlining drivers intot he windows installation disk itself using NLite), and none of them seem to work. I then used my friends old IDE hard drive, installed windows, and used a program to make a disk image of my hard drive and transfer it to my SATA drive. This didnt work either. I havn't fiddled with drive letters, (you know c: and e: and so on) i am thinking this may help but I am not sure. It is not a boot order issue i know how to do all that and nothing works. I am looking for a way to get Windows XP onto my SATA drive. (yes my mother board detects my SATA drive, and it is showing up in windows i just cant seem to get windows on it.)
I would prefer to just copy it from my IDE drive since i have already installed all the updates so if this is possible please let me know.If you know what kind of boot disk i need for windows xp installation to recognize my sata drive during installation that would be a big help too. (i have tried sata controller drivers for my motherboard, i tried using the software that came with my hard drive, and this too didn't work.)
I'm trying to format my hard drive to install windows XP pro,I currently am running windows XP pro.The problem is I can't format, when I try to format with a fdisk I get an error saying:"Your program caused a divide overflow error.If the problem persists, contact your program vendor."I also use windows XP CD and the problem with that is when it gets to the blue screen of windows setup it freezes.Anyone have any idea how to solve it and get my hard drive formatted.
I recently got myself another hard drive, that I wanted to install in my computer. From before, the computer contained a hard drive and a CD-burner. I do not have instructions on how to set the jumpers on the new hard drive to make it master or slave, so I had to try my way. I figured how to make it master, so the present configuration is that this new hard drive is secondary master, and the CD-burner is secondary slave. BIOS recognizes this, but unfortunately Windows does not seem to find any of the devices on the secondary controller with this configuration.
I have an external hard drive (150GB) which is partitioned into two parts. One partition , about 145gb, is data and files of my own. Then there is an extended partition at 5gb in size, which contains windows xp installation files. What I did was take my windows xp cd, make an ISO, and then extracted the iso and put the files into the extended partition of my external usb hard drive.The computer I want to install to has a cd drive that is not working and thus i cannot install windows xp from a cd. The BIOS of the computer DOES support booting from a USB device.I have partition magic software and have used it to create the 5gb extended partition on the usb external drive. However, I don't know how to configure anything so that it will acutally know to boot from this partition and what files to use to start the installation.
Can anyone recommend software that will allow me to copy my Windows onto another hard drive and beable to boot up from there? I appreciate any help you can give me.
I'm running a pc with a 975xbx board and an e6600 that has worked fine for 2 years plus. A couple months ago i replaced my computer case, power supply, and got some new storage hard drives, but my RAM, mobo, cpu, and optical drives stayed the same.I was running windows xp fine for this whole time....and then a couple days ago as I was surfing the web, the computer just shut off spontaneously. no warning, no nothing, just black screen and the computer was off.Now, when I start up, I'll get to the windows startup logo before I get a 0x00000007e blue screen crash.In BIOS, my hard drives, RAM, etc are picked up fine. Just for kicks i moved some ram around, dropped to one stick, unhooked the optical drives, yet the problem persists.Now, if i throw in my windows xp install CD and try to repair or just reinstall, it doesn't find the drive at all. but the bios does.
If i take a new formatted hard drive and insert it, the xp install again doesnt find it.I have 2 raid controllers on my intel board, and the floppy disks for both, but when I boot the raid controller screens pop up fine and recognize drives prior to the windows logo. If i throw my install CD in, however, and hit F6 to go to the raid controller install, the xp cd can't seem to read my floppy disks, as if they aren't even there. but the floppy drive light is on, powered, and the cables are plugged in.This is just really confusing, as if my computer just doesn't read anything but the CD drive.I'm at a loss. I'm willing to just do a clean install of windows on a formatted hard drive, but the windows CD install program won't detect the new drive (it is low-level formatted).I'm using XP professional and it's a full install CD, not just recovery.
