Windows Xp Re-installatioin / Preserve Second Hard Drive Data And 2nd Boot Windows Xp?
Jan 1, 2008
I want to install a new primary hard drive and reinstall windows xp from scratch on the new c: drive. For the moment I would also like to retain the old disc contents and the xp operating system. To try to do this I installed a second hard drive and cloned the old drive c: to the new drive f:. I created a dual boot computer by editing my boot.ini file so I could boot from either the c: or f: drive. I replaced my primary hard drive with a new drive and booted up in the f: drive. Then I cloned the f: drive back to the new c: drive creating a dual boot system. My concern now is that if I reinstall windows xp on the newly installed hard drive, the Dell installation disk will wipe out the operating system and the contents on the f: drive. Is there any way to retain the old system? I'd appreciate any help with this.
View 1 Replies
ADVERTISEMENT
Sep 15, 2009
I have two hard drives(40 GB & 160GB both internal) installed in my system. Earlier I had installed windows XP on the first hard drive (40GB) and was using second hard drive as additional storage. I had partitioned my second hard drive into 5 partitions P, Q, R, S, T. Recently I reformatted my first hard drive and reinstalled windows XP. However this has also affected my second hard drive. Now Windows shows only two drives C: (my first hard drive) and D: (second hard drive) as only one partition each. Moreover it is not showing any data on the second hard drive. I want to get back my parition info and data on the second hard drive. I thought that formatting my first drive will not affect second drive and therefore didn't take back up of the second drive. What shall I do to get back my data and partition info.
View 4 Replies
View Related
Jul 22, 2008
i have 2 sata hard drives and i need to know how to duel boot windows xp home with windows server 2003?
View 7 Replies
View Related
Sep 1, 2005
Can anyone recommend software that will allow me to copy my Windows onto another hard drive and beable to boot up from there? I appreciate any help you can give me.
View 11 Replies
View Related
Sep 5, 2009
I was running windows on an IDE hard drive and bought a new SATA and installed a fresh copy of windows on it, now having a dual boot with the old installation on the IDE. I've been running on the SATA drive for a few months now and I want to remove the IDE drive from my system but when I disconnect it and reboot I get a message that tells me NTLDR is missing so I am assuming that the boot record is on the IDE drive. How can I make the SATA drive my main boot drive?
View 2 Replies
View Related
Oct 5, 2006
My computer os is windows XP the drive is a 30 GB when I installed it I had to format it and now I only see 2.15 gb how do get to use the entire drive I have nothing on it so if it comes to reformating to do it a differnt way I will
View 5 Replies
View Related
Jul 12, 2005
What must be done to a new hard drive and which files must be on the Hard drive before Win XP can be installed?
View 5 Replies
View Related
Aug 8, 2005
for some reason xp will not load on start up. I'm planning on reformatting the hard drive but i would like to get the files that i need out of there before reformating. How do you get files from a hard drive without windows being activated?
View 7 Replies
View Related
Jul 17, 2008
i was currently running windows as my only operating system (working perfectly) and decided to try out ubuntu. afterin installing it i decided i didn't like it so i put in my windows CD and deleated the 1st 3 partitions and combined them into a 49gb partition, formatted it and installed windows on it.this worked fine, it formatted correcly and then started copying the setup files onto partition 1, but then after it restarted it wudnt see that windows was there and wudn't continue the installation. it would just go back to asking if i wanted to install from the CD again. i was installing windows xp (no service pack) but i have done this many times with this CD and hasnt stuffed up yet.
View 2 Replies
View Related
Mar 11, 2009
My old IDE hard drive went out on me so i went and bought a 500g WD SATA hard drive. When I put the windows installation disk in it does not recognize my SATA hard drive. after looking into it online, i found that alot of people had this issue. I read a few suggestions and tried them, (using the F6 function during install with drivers on a floppy disk, and streamlining drivers intot he windows installation disk itself using NLite), and none of them seem to work. I then used my friends old IDE hard drive, installed windows, and used a program to make a disk image of my hard drive and transfer it to my SATA drive. This didnt work either. I havn't fiddled with drive letters, (you know c: and e: and so on) i am thinking this may help but I am not sure. It is not a boot order issue i know how to do all that and nothing works. I am looking for a way to get Windows XP onto my SATA drive. (yes my mother board detects my SATA drive, and it is showing up in windows i just cant seem to get windows on it.)
I would prefer to just copy it from my IDE drive since i have already installed all the updates so if this is possible please let me know.If you know what kind of boot disk i need for windows xp installation to recognize my sata drive during installation that would be a big help too. (i have tried sata controller drivers for my motherboard, i tried using the software that came with my hard drive, and this too didn't work.)
View 8 Replies
View Related
May 10, 2007
I'm trying to format my hard drive to install windows XP pro,I currently am running windows XP pro.The problem is I can't format, when I try to format with a fdisk I get an error saying:"Your program caused a divide overflow error.If the problem persists, contact your program vendor."I also use windows XP CD and the problem with that is when it gets to the blue screen of windows setup it freezes.Anyone have any idea how to solve it and get my hard drive formatted.
View 14 Replies
View Related
Feb 7, 2010
Hi. My problem is similar to this one here
http://forums.cnet.com/5208-12546_102-0.html?threadID=295044
Except I am not running Vista and don't have AOL on there.
Also, I don't think my drive is actually full, or if it is, it's because of something that Sonic or Windows did.
I have a bunch of computers. This Dell laptop, Inspiron E1505, is one I primarily use to watch DVD's or online shows. There were a lot of programs installed, because I used to use it regularly, and then I loaned it to someone for about a year. It had very few files in terms of documents, pictures, music, or videos, because I had cleaned all that out before I loaned it to her, and I got a new laptop, and so only use this one to watch DVD's. Also, I should mention it has a fairly new DVD recorder because the old one died a few months back.
Sometimes I use this laptop to burn or copy disks, which is what I have been doing the past two days, using the program Sonic Digital Media LE v7, which came preinstalled. It was working fine copying dvd's (legal copies of ones I recorded myself) until yesterday, when it suddenly said that my hard drive was full and to free up "0 kb" in order to proceed.
When I close the program after this error, it gives me three crash messages (every time).
First one says MediaHub.exe application error.
The instruction at "0x0035afd0" reference memory at "0x35171ae8". The memory could not be "written". Click on OK to terminate the program."
The next error is almost exactly the same but gives all the numbers as 0x00000000.
The third error is Microsoft Visual C++ RUntime Library Runtime Error! program: mediahub.exe
R6025 - pure virtual function call.
At first, rebooting helped this problem, but then I got the error again. So I ran disk cleanup. It took a really long time and then the pc turned itself off. I turned it back on and it said that the pc had overheated because the fan vents were blocked. The vent is on the bottom, and was very dirty (possibly because my friend was a heavy smoker), so I wiped it off with a damp napkin. I rebooted and ran disk cleanup again. I was able to copy disks again until it gave me the error again. Every time I go to the C drive and check the disk free space, it gives me very little there, but I know that it's not because of any files I have on there.
Anyway, I also uninstalled all of the unimportant programs and deleted any extra files I could find. I want to run check disk, but I got an error message and it said it would run it next time I rebooted (that didn't help and check disk still didn't run, and still wouldn't run next time I tried it). I tried to run disk defragmenter, but it said I only had 5% hard drive space left and it needs 15%. I ran it anyway, and it seemed to work, and I was able to copy more disks.
Now I am getting that error message again.
I am running disk cleanup again, compressing old files, so we'll see if that works. I haven't tried System Restore yet, will try that one next. I really would rather not reinstall Windows.
Thanks for any suggestions!
Suzanne Lanoue
View 6 Replies
View Related
Jan 21, 2007
I have an extra operating system on my C drive that I want to get rid of. Can this be done without reformatting the drive
View 5 Replies
View Related
Aug 30, 2005
I recently got myself another hard drive, that I wanted to install in my computer. From before, the computer contained a hard drive and a CD-burner. I do not have instructions on how to set the jumpers on the new hard drive to make it master or slave, so I had to try my way. I figured how to make it master, so the present configuration is that this new hard drive is secondary master, and the CD-burner is secondary slave. BIOS recognizes this, but unfortunately Windows does not seem to find any of the devices on the secondary controller with this configuration.
View 2 Replies
View Related
Jun 9, 2008
I have an external hard drive (150GB) which is partitioned into two parts. One partition , about 145gb, is data and files of my own. Then there is an extended partition at 5gb in size, which contains windows xp installation files. What I did was take my windows xp cd, make an ISO, and then extracted the iso and put the files into the extended partition of my external usb hard drive.The computer I want to install to has a cd drive that is not working and thus i cannot install windows xp from a cd. The BIOS of the computer DOES support booting from a USB device.I have partition magic software and have used it to create the 5gb extended partition on the usb external drive. However, I don't know how to configure anything so that it will acutally know to boot from this partition and what files to use to start the installation.
View 3 Replies
View Related
Apr 19, 2006
I went to try to install windows xp onto a computer that already had windows on it. I did not boot from the cd. To do it without using the cd it has to copy the installation files to the computer and then run them. When setup does this it creates a new choice of an operating system to boot from called "Windows XP Setup." So now I have a Windows XP and a Windows XP setup. I've been in msconfig and looked at boot.ini but that didn't help
View 8 Replies
View Related
Sep 12, 2009
Oem disc auto partions any hdd as 16GB os fat 32/D:\ drive NTFS raw. The Sony OEM disc(s) are pre sp1.
What steps do I take to install and get the full 200 GB to bea recoginized correctly?
View 1 Replies
View Related
Nov 4, 2009
I'm running a pc with a 975xbx board and an e6600 that has worked fine for 2 years plus. A couple months ago i replaced my computer case, power supply, and got some new storage hard drives, but my RAM, mobo, cpu, and optical drives stayed the same.I was running windows xp fine for this whole time....and then a couple days ago as I was surfing the web, the computer just shut off spontaneously. no warning, no nothing, just black screen and the computer was off.Now, when I start up, I'll get to the windows startup logo before I get a 0x00000007e blue screen crash.In BIOS, my hard drives, RAM, etc are picked up fine. Just for kicks i moved some ram around, dropped to one stick, unhooked the optical drives, yet the problem persists.Now, if i throw in my windows xp install CD and try to repair or just reinstall, it doesn't find the drive at all. but the bios does.
If i take a new formatted hard drive and insert it, the xp install again doesnt find it.I have 2 raid controllers on my intel board, and the floppy disks for both, but when I boot the raid controller screens pop up fine and recognize drives prior to the windows logo. If i throw my install CD in, however, and hit F6 to go to the raid controller install, the xp cd can't seem to read my floppy disks, as if they aren't even there. but the floppy drive light is on, powered, and the cables are plugged in.This is just really confusing, as if my computer just doesn't read anything but the CD drive.I'm at a loss. I'm willing to just do a clean install of windows on a formatted hard drive, but the windows CD install program won't detect the new drive (it is low-level formatted).I'm using XP professional and it's a full install CD, not just recovery.
View 2 Replies
View Related
Mar 11, 2006
I want to back up my files to an external hard drive using Windows Backup, but it is not shown as an option. The only options shown are the floppy and f: drives. Can you use this program to back up to an external drive? If so, how do you tell it where to send the data?
View 4 Replies
View Related
Jul 10, 2005
Can I install XP on a hard drive which has only one partition with data without destroying the data?
View 2 Replies
View Related
Oct 6, 2007
Loads of *.TMP files created automatically in c:windowssystem32 " on http://forums.techguy.org/malware-re...matically.html while searching for a problem I was having.It was posted by DidoWide on the HJT forum, so I was unable to post a reply, nor could I send DidoWide an email to ask how he solved in in the end, but I have the exact same problem. Two times now, at a seemingly random times (both times round about 11:00AM), all of a sudden, loads (and I mean tens of thousands) of TMP files, looking like 0fb149fbcb12b2799cfd1c55fc08b4e9.TMP are pumped into my system32 folder. In a matter of 15 or 20 minutes, this may generated as much as 5GB of used diskspace. Some are 0K, some are 91K, but other than those tow, sizes seem to be constant.
View 2 Replies
View Related
Aug 15, 2009
I've been trying to solve this for a few days now and I'm not having any luck. I don't have access to a PC running a windows OS or I'd just set up the flash drive there.
View 2 Replies
View Related
Jun 25, 2008
I have a five year old dell dimensions 8200. Three years ago, I added a 250 gig. D-drive. My computer has been so slow that I wanted to reinstall windows. So, erased and formatted my D-drive and put windows on it. I then added a program called "Wipe Drive" in order to erase my C-drive. (I was thinking to use my d-drive mainly and c-drive for backup). I closed my computer, then when I went to reboot, i first got the message "ntldr is missing press control alt delete." So, I did this. I soon did not get the ntlrd message and got a message saying failure to boot and press contol, alt, delete to restart. I tried to instal windows again and it did not boot. I did the f2 thing and made sure my cd-rom was first. I did the f12 thing and tried to open cd. Nothing has worked to help boot or get to the blue screen that lets me choose drive.I think I erased important start up info on my c-drive.
View 8 Replies
View Related
Aug 21, 2005
I format windows 98 with win98 startup disk and windows XP was installed. every start the pc,it prompt two boot loader for option.windoes 98 or windows XP. How to delete the window 98 option on the boot loader screen because windows 98 had been formated.
View 3 Replies
View Related
Oct 10, 2010
I have a compaq presario x1000 that is virus infected. it loads windows very slow and the dvd cum cd rom does not work. how can i reformat my laptop? is it possible to boot it using a usb pen drive since my dvd cum cd rom does not work?
View 2 Replies
View Related
Sep 9, 2006
i am trying to edit vidoe in windows but it is really unstable i tried to make a dual boot linux but after multiple distros it got fed up and gave up. now i am thinking of makeing 2 windows partitons im just wonder ing if this is possible i also need a good boot load does anyone know of any?
View 2 Replies
View Related
Jan 8, 2009
I am cloning my existing hard drive in my laptop (sata) to an external hard drive (pata) in preparation for installing a new larger hard drive (sata)in the laptop. Can I, or how do I transfer the cloned data from the external (pata) to the new internal hard drive (sata)? Thanks in advance and I apoligize if this is a rudimentary question as this is my first time attempting something like this.
View 6 Replies
View Related
Sep 7, 2009
I have a laptop on which windows xp home is installed on c drive. It has a hard didk of 160gb all on c drive. Whenever i reinstall windows on my laptop all my data get erased. Is it possible to make another drive and allocate some 80 gb to it so that on reinstalling the data does not get erased.
View 8 Replies
View Related
Oct 13, 2008
I had this idea, see if anybody has an opinion about this. My wife has an old XP computer I want to buy her a new one but she doesn't like the vista and she wants to keep the old xp operating system. What I want to do is take the old hard drive and put it in the new computer as the master and take the new hard drive and put it in as the slave erasing the vista off it. Then using the master slave way can I transfer the xp operating system and all her files and data from the old hard drive to the new one.
View 3 Replies
View Related
Aug 3, 2005
I have recently added a 160Gb Maxtor 6 P160PO drive in an external hi-speed USB housing connected via a 4 port USB-2 card. I have tried copying large amounts of data (13-20Gb) but after a few minutes, I get "The drive is not ready" and it disappears from My Computer. If I disconnect it and re-connect it, it will reappear. The same happended with a 20Gb drive I swapped in, so it seems that it's not the drive. I have tried a different port to no avail.
View 1 Replies
View Related
Sep 3, 2005
My hard drive just changed to fat32 for some reason and all the data is gone? Does anyone know what could be wrong, can I get my data back? When I start it up it goes through a check, ive left the check running and its been going ages, im not sure what its doing. Says something about lost clusters and truncated?
View 1 Replies
View Related
