Maxtor SATA Hard Drive Slow - Long Boot
May 18, 2007
I have a maxtor hard drive SATA 200GB as my main drive and a second drive D. Very recently when I have noticed that my computer took longer to boot into windows. Applications seem to take a bit longer than usual to load. I have XP SP2 installed. I defragment my drive every few weeks so its not a defragment problem however when I try to defrag it now, it takes many times longer to do so. Also for a scan disk of C: (chkdsk on boot) it took 6 hours to get to about 25%. So there must be a problem. I can hear the hard drive loading sound for a few seconds and then there is a very long pause maybe about 10-20 minutes. It should only take a few hours the last time i did it maybe about 5 hours. Something is wrong.
When I transfer a large file like 1gb into my drive D it takes 15 minutes. Which is a bit long for a SATA enabled hard drive. I have had this drive for about 2 years now and it has never gone this slow before. I have downloaded the seatools from the maxtor website which diagnoses the drive. The tool ran slow but my hard drive passed the tests. Also when I ran that scan disk, it did say there was a mirror copy of something and also some other things. I think it had the word security in it so it deleted somethings. It mentioned indexes and some files. I forgot most of it.
I have checked my D drive and it is running fine and unaffected. Also I noticed during bootup that on the windows logo screen, the one with the bar moving from left to right that it freezes for about 5 seconds somewhere near the end of its loading. Then my keyboard lights come on (recognises keyboard). Later after the logo disappears, the screen is black for about 1-2 minutes and the hard drive periodically stops loading then starts loading something. This also happens when the welcome blue background screen comes on which is making boot times slow. Also happens when I shut down. There are some periods of hard disk inactivity.
View 5 Replies
ADVERTISEMENT
Dec 14, 2008
My Maxtor External Drive became corrupted and I needed to re-format the drive. Unfortunately, while Working in Windows XP I accidentally deleted the partition and the drive. Now I can't get Windows XP to recognize the Maxtor Drive. I tried re-booting the PC and plugging in the Maxtor USB Cable, but this did not work. The Maxtor Drive was my H: Drive. Can get Windows to recognize my Maxtor Drive? When I deleted the drive I was working in the "Computer Management" Screen. I navigated to this screen through the following path: Control Panel/Administrative Tools/Computer Management.
View 2 Replies
View Related
Sep 7, 2006
I have all of our digital photo's on this external hard drive & now I can't access it. When I try I get an I/O device error message. Can anyone tell me how to get back in even once to copy the photo's to my internal hard drive & then burn them?
View 2 Replies
View Related
Sep 7, 2008
Microsoft did an upgrade to my desktop automatically, called a service pack 3, after which my Maxtor 3200 external hard drive stopped being recognized by my Windows XP system. A code 10 error appeared every time I tried to access through my device manager, and I cannot find a driver to operate this hard drive, I will many songs and pictures if I cannot access this external hard drive. I went on the Maxtor site and they said, it is an internal driver that operates off of my system, what can I do to access the data on this external hard drive.
View 3 Replies
View Related
Oct 21, 2008
I have a Computer which operates on XP Service Pack 2 and has a Maxtor 1TB external Hard Drive hooked up. We do a lot of Video Editing (programs such as DV Storm, Vegas etc.) and up until yesterday the external came up as Local Disk E, but it became unplugged whilst the Editing programs were running.It now it comes up as Local Disk (I) but the problem is the Edit programs doesn't recognise any of the files (avi., mpg etc.) that are on the drive (comes up as 'invalid path'), and nor does it show them in their previous format.
View 4 Replies
View Related
Oct 19, 2006
I am having an issue with a Maxtor Model Number 92739U6 hard drive. I have just finished formatting and installing windows xp home edition. Everything was going ok until I restarted the computer. First right after I restarted the computer I got an error message A Disk Read Error Occurred. Press CTRL+ALT+Del. I was unsure what caused this error message so I started to research this issue on Maxtor?s website and they advised me to use fdisk /mbr to repair the error. I did that and restarted the computer. Same Error?. The thing I can?t figure out is why I am able to boot right to windows using a boot disk.
View 8 Replies
View Related
Jul 27, 2005
I just installed a new hard drive then I installed windows XP SP2 on the disk and the computer keeps rebooting and I'm getting a blue screen c000221 unknown hard error. Then I re-install windows 2000 it works Ok. Then I installed windows XP SP1 it work OK, then I installed the SP2 and the computer started to reboot again. I used drive jujitsu and it was OK. So what is the issue with SP2 and the Maxtor drive anyone knows or has seeing this issue?
View 3 Replies
View Related
Aug 2, 2005
I have a hardrive( Maxtor 6Y200P0) wich have got corrupted and bad segments. (this seme to be a common problem with Maxtor drives) Im almmost sure this drive have psychical damaged clusters, cause i have tested alot & alots of tools that should fix this has failing in repairing this damaged clusters and segments. this includes Maxtor official PoweMax v 1.21, wich fails to complete the surface test. i have got an Error Diagnostic Code=de676679. a code with a 8 numeral should indicate that a Maxtor Drive drive is broken,and is in need of replacement. thats all i know where should i send this code for a real analyz?, cant find anything on Maxtor Website, Another question, there is allso an option to do a Low ore High level formatation of the drive. I have heard that this could fix corrupted segments, If so,this must only be possible on logical damaged hardrives, not psycial damaged drives right? i have waiting with reformatation cause im unsure what type damage the drive have, and this is my last alternative to do.? should i do a low/high level formatation anyway?
View 1 Replies
View Related
Oct 12, 2008
My problems are a very long boot up (go away and make a coffee length) and also slow running, especially in opening progs for the first time ie, very slow to open Word initially, then much faster opening subsequent Word files. Even so, the laptop has slowed considerably and is often hesitant.
View 14 Replies
View Related
Oct 5, 2006
Can anyone tell me whats the difference between a ATA hard drive and a SATA hard drive?
View 2 Replies
View Related
Jan 25, 2007
I have an HP Media PC M400Y. It is a P4 3.0 Ghz with 1GB ram. It originally came with MCE2002. Last week I upgraded to MCE2005 to use the media extender feature with my new X-box 360.
Here is the problem and some background.
About a year ago, I had installed a second SATA hard drive, Seagate Baracuda 300GB, model ST3300831AS. This drive was plug and play into the motherboard and never had any issues. Before reformating the main C: drive, I moved all my valuable data on the SATA drive.
I then turned the PC off, removed the power and signal cables from the SATA drive. (I'm a novice, and didn't want to take any chances of erasing the SATA drive, while reformating the main C drive)
View 8 Replies
View Related
Mar 8, 2009
i have a hp compaq dc7100 it has a sata hard drive in it, i need the drivers for it, not able to load xp on in locks up, i do not have the drives, i checked with hp not able to find.
View 5 Replies
View Related
Mar 3, 2006
Just bought a 300Gig Maxtor SATA hard drive. My supports the connection onboard. How do I get Windows XP pro to reconized the full 300Gigs and not just 137Gigs. I have a Intel(R) Desktop board D85GVHZ Base System
Intel(R) Celeron CPU 3.06Hz 512MB of ram.
View 3 Replies
View Related
Aug 18, 2007
I wasn't sure where this thread should be placed. I want to install XP and it wouldn't detect my hard drive. Since I have no floppy drive I want to slipstream a xp cd with the drivers already there. I am using the program nLite to make the bootable disc. However the problem is that I can't find the drivers or i'm unsure what is correct. My controllers are... Intel(R) 82801HEM/HBM SATA AHCI Controller Intel(R) ICH8M Ultra ATA Storage Controllers 2850.. But chipset is Mobile Intel(R) 965 Express Chipset Family.
View 7 Replies
View Related
Jun 14, 2009
My motherboard died and I had my files password protected in Windows XP Media Edition, can I connect the SATA hard drive to another PC via USB and unlock the protected files, or does it have to run as the main drive to allow access and entry of password and then making all files public?
View 1 Replies
View Related
Jan 7, 2010
So I was bored today and began creating a old Pentium 4 System out of old PC parts around the house.Now, I have assembled everything and have tested all the parts and all are working fine, However when I go to install Windows XP on the machine it will not detect the Hard Drive (On the Partition Screen). Now I thought it may be a hard drive problem so I connected the hard drive up to my current PC and ran the XP Installation fine.However, Now when I try to boot the XP I installed on the hard drive off of my other system it will get to the splash screen and restart, so I turned off automatic restart on system failure and I get the 0x0000007B Stop error.
So I retried the XP installation on the system again, got to the Partition and Hard Drive selection screen and still no Hard Drive to be seen, I plugged in a USB and it detected it fine.I have tried booting in safe mode & every option under F8, However it just restarts on the XP splash screen, And as I said the hard drive seems fine as it comes up in bios and my main PC ran it fine, So I'm beginning to think that i'm in need of my motherboards SATA Drivers or something.
View 9 Replies
View Related
Sep 17, 2005
I recently bought a new system with XP home already installed. Now I find that I should have installed the new SATA hard drive for better perfomance with my new P4 dual layered processor. I have ordered the new SATA 80 GB drive and would expect that when I install the XP on it I will have to call microsoft to activate it on the hard drive (since it was originally installed on the hard drive that I got with the new system). Any issues here or just call and explain the upgrade during the activation? (Understood that I will have to reinstall my other software again) As a follow up to this, would there be any problem slaving the original drive on the same IDE ribbon as the new SATA drive?
View 7 Replies
View Related
May 25, 2004
I installed a Serial ATA hard drive. Booted from floppy,partitioned and formatted 120mb HD,with 2 partitions.
Connected my old IDE drive and booted from Norton Ghostdisc, cloned my old drive to the new one. Removed all drives and USB card readers except the new SATA drive. Windows will not fully boot, it halts at the blue Windows intro screen. Restarted Windows, and scandisk ran, but indicated drive letter "H" not "C", so I guess the windows installation is still looking in the original place for it's files, ie. the "C" drive, that's why it won't boot. You cannot change the "System" drive letter from "Computer Management" within XP, and I cannot get into Windows anyway. Is there a "work around" for this, other than a clean install? Even then, is it still going to be drive "H"? And that means another Windows activation. How many goes do you get for activation? I tried a windows repair installation, and reactivation (wasted). Windows then worked, sort of. Lots of things were missing and programs unuseable,as they were looking for their files on "C": so I went back to square 1, put my old drive back in for the moment
View 2 Replies
View Related
Oct 8, 2006
I'm can't get WinXP installation to find my Sata Hard-drive. I'm running Suse Linux on my IDE-HD and I could also had no problems getting my Suse 10.1 installation to install on the SATA-HD. I've booted up with winxp media install disk and tried to use the F6 key at the right time but nothing happens so it keeps going until I get to the point where I can press the S key to install SATA RAID driver from disk that came with my motherboard. The drivers install but then windows install still says no disk to install windows... I don't get it.
I've checked my bios and SATA in there, in fact the first thing I see when I boot up in the boot sequence is the SATA drive. Linux knows it's there but windows install doesn't. I installed XP on a WD SATA drive before and all I had to do was press F6 to install the controller from the XP disk but that doesn't work now.
View 7 Replies
View Related
Jul 31, 2007
I'm not completely computer illiterate but i have never set-up a dual or triboot system before.I want to triboot XP Pro, Vista Home Premium and Ubuntu. I have a brand new 500GB SATA hard drive which is straight out of the box. I don't have vista yet but plan on getting it soon (when the next service pack is released) and don't want to have to reformat my hard drive when i do. So i thought it would be better to prepare for it now
View 1 Replies
View Related
Mar 11, 2005
I just bought me a new SATA 250GB Hard Drive and a external hard drive enclosure. I received the items today and I just realize the hard drive enclosure doesn't build into the way to connect to the SATA 7-pin data connector. All it has is the Parallel ATA 40-pin data connector. Can anyone recommend any external hard drive enclosure that can connect to SATA connector directly. And there is a main reason why I choose a SATA hard drive.
View 1 Replies
View Related
Feb 27, 2010
I want to install Windows XP on a new SATA HDD drive. The computer in question came with Windows Vista installed. There is no IDE option in the BIOS. There is no floppy drive on the unit. So it looks like I might have to slipstream all the drivers, etc., on to the unit (which I have no clue how to do). I do not have the motherboard make or model number, nor do I have the motherboard CD. My business partner is trying to take the cover off the laptop as we speak, but we're having trouble getting it off. Thus, as of now, we can't identify the motherboard manufacturer or the serial number.
Can anyone here point us in the right direction? The computer in question is a Compaq Presario c769us (laptop). It was purchased in June 2008. This all started when my business partner decided to use a Vista System Recovery CD to overwrite the existing copy of Vista that he had on the computer. After he ran the disk, the system stopped working. So right now, we have the old hard drive, which contains a non-working copy of Vista on it (which we can 't delete), and we have the new hard drive (a 250 GB Hitachi). So maybe we could just delete the copy of Vista on the old hard drive - the self drive test checked out okay on the old hard drive. So I guess the two options are - figure out a way to put XP on the NEW hard drive, or figure out a way to put XP on the OLD hard drive and delete Vista from it first. If we can put XP on the old hard drive and remove Vista from it, we could take the new hard drive back, and get our money back, too.
View 14 Replies
View Related
Mar 11, 2009
My old IDE hard drive went out on me so i went and bought a 500g WD SATA hard drive. When I put the windows installation disk in it does not recognize my SATA hard drive. after looking into it online, i found that alot of people had this issue. I read a few suggestions and tried them, (using the F6 function during install with drivers on a floppy disk, and streamlining drivers intot he windows installation disk itself using NLite), and none of them seem to work. I then used my friends old IDE hard drive, installed windows, and used a program to make a disk image of my hard drive and transfer it to my SATA drive. This didnt work either. I havn't fiddled with drive letters, (you know c: and e: and so on) i am thinking this may help but I am not sure. It is not a boot order issue i know how to do all that and nothing works. I am looking for a way to get Windows XP onto my SATA drive. (yes my mother board detects my SATA drive, and it is showing up in windows i just cant seem to get windows on it.)
I would prefer to just copy it from my IDE drive since i have already installed all the updates so if this is possible please let me know.If you know what kind of boot disk i need for windows xp installation to recognize my sata drive during installation that would be a big help too. (i have tried sata controller drivers for my motherboard, i tried using the software that came with my hard drive, and this too didn't work.)
View 8 Replies
View Related
Oct 17, 2009
I have noticed lately that my computer seems to take an excessively long time to boot up completely - almost 5 minutes. Also when clicking on desktop icons, they seem to also take much longer to load. Windows Explorer (the folder and file management tool, not to be confused with Internet Explorer) is agonizingly slow to rename and open folders and files, sometimes taking close to 2 minutes just to open a 56 KB file. I have done all the usual things like running a virus and spyware scans (I have AdAware, Spybot, Malwarebytes and ATFCleaner, CCleaner as well as my ISP's Computer Associates Antivirus, Firewall and Spyware protection installed), emptying temp files and recycle bin, and defraging the hard drive and I've unchecked "Automatically search for Network folders and printers".
I also did a chkdsk scan and a system restore to before when the problem started. Nothing seems to help the slow response, especially when working with folders and files through Windows Explorer. I have not downloaded or installed any programs recently (only AdAware, Spybot and CA updates), but I did have a new power supply and a new cable modem installed recently. Even the tech that installed the new power supply said he was concerned at how long it took for my computer to boot up, however he only repairs hardware and could offer no suggestions as to what the problem is. If it's any help in diagnosing my problem, my system is an HP Pavilion 750n with a 1.6 GHz Pentium 4 processor and 768 MB RAM. Used disk space is 16.8 GB, unused space is 57.6 GB....
View 3 Replies
View Related
Mar 10, 2005
I just built my first computer (specs in signature) with a SATA hard drive. I put the windows XP Pro CD and it formatted my Hard drive the it installed windows, but it says that windows could not start due to a hardware configuration problem. Is there some special thing I need to set to get it to boot from the drive or what?
View 11 Replies
View Related
Sep 10, 2009
Does anyone make a USB dock that you can use with both IDE and SATA drives?
View 10 Replies
View Related
Mar 31, 2010
I had voltage fluctuations last night due a snowstorm and the voltage dropped crashing my PC.It now won't boot and gives the error that a file is corrupted.Windows/system32/config..The PC runs an OEM XP home edition on a SATA drive, the PC also has an IDE drive (D) but the OSes are on the C drive.Inside the XP installation I have Linux Mint installed.When I boot I get the 2 options I always used to , XP (default) and Linux Mint.XP won't boot when selected and gives the error above.The Linux Mint, also on C and in fact installed as a program within XP, will boot, hence I believe the SATA drive to be undamaged.I can see the C drive and all the XP files from the Linux installation.I've tried using the original full CD and the recovery console but when the recovery console opens all it can see is the IDE drive which it labels D (and of course doesn't contain the original XP install.I can't remember how I got XP on the SATA drive in the first place, I don't appear to have any Hard drive drivers in the case I keep all software CDs in and I'm a bit flummoxed. I can only imagine I just fitted it and loaded the XP install disc but that's at odds with what seems to be happening now.Spent a large part of today Googling but can't find anything that will fix this. so far.I don't want to have to wipe and re-install everything unless there's no option, it's a fast way to kill a couple of days over the holidays.
View 8 Replies
View Related
Jul 9, 2008
I am posting a computer problem of "The slowest computer of all"? It takes 5 to 6 minutes to boot and then takes on some dialog boxes when clicking 7 seconds to activate, (Show on Screen) and on others, takes 14 to 21 seconds to activate? Sometime you even see the searching flashlite on the screen when you click. The same thing happens with the right click context menu. This computer is a HP a430n running a AMD Athlon(B) XP 3200+ running at 2.20 GHz. It has 1Gig of ram, a GeForce4 MX440 (Raven) AGP 8x graphic card,Integrated AC97 audio and a Maxtor 250Gig hard drive.
View 9 Replies
View Related
Dec 19, 2004
I'm trying to install Windows XP on my new Serial ATA hard drive, it has been formatted everything seems ok, When I start installing windows XP pro on this machine it seems like it just can't detect the damn hard drive, when I set it as boot on te serial ata drive eeverything works fine, it goes as C:/ but I just can't switch to my cd drive with windows XP to install it.When I boot up my other hrd drive with windows xp, I can actually see my hard drive in windows explorer.
View 3 Replies
View Related
Aug 1, 2009
I have a main WIN XP Home Edition based computer with an Intel 3118 chip, 2GB RAM,190GB Hard drive with 126GB free, additional drive via USB with 470 GB and 399GB free and networked with a laptop and Dell computer all able to read each other. On the main computer I have 60+ icons on the desktop and have Zone Alarm Security Suite and Forcefield running updated.I have cleaned all computers with Crap Cleaner and Esaycleaner have defragged and deleted all unwanted files but still it takes some 9-10 minutes to boot from hot or cold and the close down of programs also takes between 1-2 minutes.
View 32 Replies
View Related
Jul 22, 2008
i have 2 sata hard drives and i need to know how to duel boot windows xp home with windows server 2003?
View 7 Replies
View Related
