Installing SATA - Boot Serial Drive
Dec 19, 2004
I'm trying to install Windows XP on my new Serial ATA hard drive, it has been formatted everything seems ok, When I start installing windows XP pro on this machine it seems like it just can't detect the damn hard drive, when I set it as boot on te serial ata drive eeverything works fine, it goes as C:/ but I just can't switch to my cd drive with windows XP to install it.When I boot up my other hrd drive with windows xp, I can actually see my hard drive in windows explorer.
View 3 Replies
ADVERTISEMENT
Jun 20, 2010
installing xp on a sata drive as windows xp wont see the drive i know i need the sata drivers but cant find the rights ones for my board its gigabyte g31m-es2l chipset g31 express
View 6 Replies
View Related
Aug 19, 2007
I've read all the reports and "in theory" I know what I need to do. However, I haven't been able to pull it off yet. Here goes:
I hate Vista. I'm installing XP.
I have a SATA drive. I don't have a floppy drive.
I believe I can do it in the BIOS.
I've changed the HD setting in the BIOS from SATA to ATA (my only choice). XP installs fine. But now I need to change it back to SATA. I do that, restart and I get the blue screen with an automatic restart. I'm sure I need to add the SATA drivers somewhere, but I'm not sure where or how.
View 14 Replies
View Related
Apr 11, 2008
I've looked around and I'm having a hard time finding good info on this. I've looked up stuff like slipstreaming SATA drivers into the windows disc, but I don't think I'm doing it right. I got the correct SATA drivers from gateways website. I'm pretty sure this system just uses the intel SATA Chipset. Any way if anyone could help me install XP on my Gateway C-141XL laptop without having a floppy disc I'd really appreciate it.
View 2 Replies
View Related
May 25, 2004
I installed a Serial ATA hard drive. Booted from floppy,partitioned and formatted 120mb HD,with 2 partitions.
Connected my old IDE drive and booted from Norton Ghostdisc, cloned my old drive to the new one. Removed all drives and USB card readers except the new SATA drive. Windows will not fully boot, it halts at the blue Windows intro screen. Restarted Windows, and scandisk ran, but indicated drive letter "H" not "C", so I guess the windows installation is still looking in the original place for it's files, ie. the "C" drive, that's why it won't boot. You cannot change the "System" drive letter from "Computer Management" within XP, and I cannot get into Windows anyway. Is there a "work around" for this, other than a clean install? Even then, is it still going to be drive "H"? And that means another Windows activation. How many goes do you get for activation? I tried a windows repair installation, and reactivation (wasted). Windows then worked, sort of. Lots of things were missing and programs unuseable,as they were looking for their files on "C": so I went back to square 1, put my old drive back in for the moment
View 2 Replies
View Related
Mar 31, 2010
I had voltage fluctuations last night due a snowstorm and the voltage dropped crashing my PC.It now won't boot and gives the error that a file is corrupted.Windows/system32/config..The PC runs an OEM XP home edition on a SATA drive, the PC also has an IDE drive (D) but the OSes are on the C drive.Inside the XP installation I have Linux Mint installed.When I boot I get the 2 options I always used to , XP (default) and Linux Mint.XP won't boot when selected and gives the error above.The Linux Mint, also on C and in fact installed as a program within XP, will boot, hence I believe the SATA drive to be undamaged.I can see the C drive and all the XP files from the Linux installation.I've tried using the original full CD and the recovery console but when the recovery console opens all it can see is the IDE drive which it labels D (and of course doesn't contain the original XP install.I can't remember how I got XP on the SATA drive in the first place, I don't appear to have any Hard drive drivers in the case I keep all software CDs in and I'm a bit flummoxed. I can only imagine I just fitted it and loaded the XP install disc but that's at odds with what seems to be happening now.Spent a large part of today Googling but can't find anything that will fix this. so far.I don't want to have to wipe and re-install everything unless there's no option, it's a fast way to kill a couple of days over the holidays.
View 8 Replies
View Related
May 14, 2007
I just formated a toshiba laptop, and finished installing windows. It worked fine. But when it came time to activate the operating system, it did not recognize the cd key that was printed on the bottom of the lap top. I tried to call the activation phone number, and it didnt recognize the long number generated by the computer which will allow the phone activation
View 6 Replies
View Related
May 18, 2007
I have a maxtor hard drive SATA 200GB as my main drive and a second drive D. Very recently when I have noticed that my computer took longer to boot into windows. Applications seem to take a bit longer than usual to load. I have XP SP2 installed. I defragment my drive every few weeks so its not a defragment problem however when I try to defrag it now, it takes many times longer to do so. Also for a scan disk of C: (chkdsk on boot) it took 6 hours to get to about 25%. So there must be a problem. I can hear the hard drive loading sound for a few seconds and then there is a very long pause maybe about 10-20 minutes. It should only take a few hours the last time i did it maybe about 5 hours. Something is wrong.
When I transfer a large file like 1gb into my drive D it takes 15 minutes. Which is a bit long for a SATA enabled hard drive. I have had this drive for about 2 years now and it has never gone this slow before. I have downloaded the seatools from the maxtor website which diagnoses the drive. The tool ran slow but my hard drive passed the tests. Also when I ran that scan disk, it did say there was a mirror copy of something and also some other things. I think it had the word security in it so it deleted somethings. It mentioned indexes and some files. I forgot most of it.
I have checked my D drive and it is running fine and unaffected. Also I noticed during bootup that on the windows logo screen, the one with the bar moving from left to right that it freezes for about 5 seconds somewhere near the end of its loading. Then my keyboard lights come on (recognises keyboard). Later after the logo disappears, the screen is black for about 1-2 minutes and the hard drive periodically stops loading then starts loading something. This also happens when the welcome blue background screen comes on which is making boot times slow. Also happens when I shut down. There are some periods of hard disk inactivity.
View 5 Replies
View Related
Sep 19, 2007
I have an old HD From a system that I got rid of. I want to put it into a friends system to see if I can retrieve the files off of it and put it onto my external HD. The hard drive was the boot disk and the computer I am installing it on has it's own boot disk. If I boot up with two boot disks will there be a problem? Is there anything I need to take into account before doing this? I am planning on installing the old HD onto an ATA cable that I unplugged from the DVD drive. The HD that is in this system is not on an ATA cable, I'm not sure what it is connected to, just a small plug with a blue cable going to the mother board.
View 3 Replies
View Related
Jun 8, 2006
how i can change a product key in windows xp? is there a tool wer i can download to change from 1 seriel to another valid seriel?
View 7 Replies
View Related
Jun 12, 2008
I'm basically on 'reinstall not booting Windows XP' duty this week. The problem I have is my father inlaw lost his C.O.A of his tower somewhere between his house, his car and my house, (about 60 miles).I can't boot from his hard drive, however I can 'browse/access' it. I've tried a couple of 'retrieve windows key' programs, which work...on my P.C! I have my key tho! I tried installing one into his hard drive but kept finding my key. Is there a command from 'DOS prompt' or some other measure I can take to recover his serial key?
View 1 Replies
View Related
Jun 25, 2005
I have just built a new PC from new components. It boots into BIOS fine and detects all the drives - SATA HDD and CD. I have set up CD as boot drive, and installed the XP Pro disc. It immediately puts message "Setup is inspecting your hardware configuration..." and then just sits there doing nothing. I have left it for a long time so far but nothing is happening. This is repeatable. Do I need to do something different eg load drivers from a floppy or is there a problem with my hardward set up?
View 11 Replies
View Related
Sep 4, 2007
I am trying to install windows XP Pro on a Dell Dimension 9200 with SATA drives. I have tried the F6 but I don't have a floppy drive, is there a way to use a USB thumb drive, to provide the SATA driver?
View 3 Replies
View Related
Oct 2, 2008
I need to repair my xp on my Sony VAIO VGN-AR11S and need to find HDD drivers to load while XP is loading using F6, I already tried Intel's divers and it not working
View 1 Replies
View Related
Oct 24, 2008
I'm trying to set up a dual-boot with Ubuntu and XP64. Initially I just had Ubuntu on my one sata hdd and XP on an ide hdd. I decided it'd be better running XP on the sata drive too, so I resized my linux partition with gparter, and created a new NTFS partition.The problem is, when I try to install XP onto the drive, it cannot seem to see the sata drive. Nothing was listed at all except the ide drives and my usb drive.I did some looking and found the 64 bit sata drivers for my motherboard, managed to load them onto a floppy and load them into the XP setup. This was all fine again until the time to select a partition, where it seemed to list the drive, but only shows 'Unknown disk' 'There is no disk in the drive'.I tried deleting the partition I made with gparter to see if XP could at least see the 'unallocated space' but to no avail.I even tried making a boot disk in nLite with the sata drivers, but it made no difference (not really surprisingly).If I try to use the 32 bit drivers that came with my mobo, it won't let me install XP.I'm all out of ideas to why it won't work.
View 4 Replies
View Related
Feb 25, 2006
It's looking like I have to re-install C+XP Pro SP2. I have never installed XP Pro SP2 before myself on SATA drives - I know that you used to have to get the hard disc drivers from somewhere first so you could use them in the set up process. I've never done this either! Is this still an issue with XP SP2 (I have a full install Windows XP Pro SP2 CD). If so, could someone outline the details for me or point me in the right direction web wise.
View 3 Replies
View Related
Dec 3, 2006
My computer came preinstalled with a whole bunch of HP garbage I didn't want.. So I bought a copy of WINxp pro and tried to install.. Upon doing this It couldn't read my hard drive, which I later determined was due to the fact it is a SATA hard drive and the XP install cd doesnt have the drivers for it. Solution was, I changed a setting in my computer's BIOS to change the raid mode to IDE instead of SATA, then the install proccess went fine. Problem is now I have to keep it at IDE, and if I turn it back to SATA the computer retstarts after the Starting Windows screen with the Windows icon, I assume this is due to the fact that Windows didn't bother installing any SATA drivers since I installed in IDE mode... Could somone please point me in the right direction as to what I need to install/configure to allow WIN to boot up with my BIOS using SATA mode?
View 5 Replies
View Related
Sep 17, 2005
I recently bought a new system with XP home already installed. Now I find that I should have installed the new SATA hard drive for better perfomance with my new P4 dual layered processor. I have ordered the new SATA 80 GB drive and would expect that when I install the XP on it I will have to call microsoft to activate it on the hard drive (since it was originally installed on the hard drive that I got with the new system). Any issues here or just call and explain the upgrade during the activation? (Understood that I will have to reinstall my other software again) As a follow up to this, would there be any problem slaving the original drive on the same IDE ribbon as the new SATA drive?
View 7 Replies
View Related
Aug 2, 2005
I was wondering if it makes any sense to buy and install a SATA 300 controller to work with two WD SATA 300 drives. I kind of doubt I will achieve 300mb buffer to host transfers with only SATA 150 motherboard.
View 6 Replies
View Related
Dec 27, 2005
Installed XP on a Maxtor Diamondmax 10 200GB SATA 150 (F6 and drivers from floppy) ive it as 1st boot device, but it gives me a boot failure error after POST my drive's are as follows
Primary IDE Master - Maxtor 40GB
Primary IDE Slave - Maxtor 120GB
Secondary IDE Master - NEC DVD Writer
Secondary IDE Slave - Sony CD ROM
Third IDE Master - Maxtor 200GB
View 6 Replies
View Related
Dec 24, 2008
I cannot install Windows XP onto a SATA hard drive. I read that I need to install the drivers for the HD separately during the Windows installation but how do I do that.
View 3 Replies
View Related
Dec 10, 2006
I can't install Windows to the SATA drive. It loads everything it needs, then when it tries to boot, it says the files aren't found. I'm guessing it can't read it without the drivers installed, but how do i do that with no OS? I was thinking of dual booting with linux.
View 2 Replies
View Related
Jan 31, 2008
a few days ago i had a problem performing a clean install of Windows XP which is on another thread Link below:
URL...I now have managed to install XP on my 60GB drive but when i try to format my 400gb SATA drive i cannot. BIOS Sees my SATA drive and windows XP sees the drive as Unallocated. I tried formatting it in windows and Partition Magic 8 and both times windows seems to crash and hangs and there is nothing i can do but reboot to get back into windows.
View 14 Replies
View Related
Sep 19, 2005
I have a pc with 2 hardrives that has been working for quite a while now. One drive is IDE and another is a
sata drive. the sata drive has a partition in which windows xp is installed on. Now its time to format this computer and give it a fresh new start, but then I start the windows set-up from the boot disc it doesnt detect the sata drive.
View 6 Replies
View Related
Feb 19, 2005
I recently installed xp for the first time after replacing motherboard and CPU.I skipped setup because I didn't know what I was doing. Now I can't boot up (cold or warm) without using the original disk. Can I just go into setup and change boot settings without re-installing.Is there anything else I should know before I attempt to fix this problem? I am tired of using the disk every time I update something or install new program.
View 14 Replies
View Related
Jan 25, 2007
I have an HP Media PC M400Y. It is a P4 3.0 Ghz with 1GB ram. It originally came with MCE2002. Last week I upgraded to MCE2005 to use the media extender feature with my new X-box 360.
Here is the problem and some background.
About a year ago, I had installed a second SATA hard drive, Seagate Baracuda 300GB, model ST3300831AS. This drive was plug and play into the motherboard and never had any issues. Before reformating the main C: drive, I moved all my valuable data on the SATA drive.
I then turned the PC off, removed the power and signal cables from the SATA drive. (I'm a novice, and didn't want to take any chances of erasing the SATA drive, while reformating the main C drive)
View 8 Replies
View Related
Mar 8, 2009
i have a hp compaq dc7100 it has a sata hard drive in it, i need the drivers for it, not able to load xp on in locks up, i do not have the drives, i checked with hp not able to find.
View 5 Replies
View Related
Mar 3, 2006
Just bought a 300Gig Maxtor SATA hard drive. My supports the connection onboard. How do I get Windows XP pro to reconized the full 300Gigs and not just 137Gigs. I have a Intel(R) Desktop board D85GVHZ Base System
Intel(R) Celeron CPU 3.06Hz 512MB of ram.
View 3 Replies
View Related
Aug 14, 2007
I have recently bought a new computer that came with windows vista as you may have guessed the experience mostly has not been a good one, with lots of compatibility issues. I want to dual boot Vista with XP but the problem is I have heard windows XP does not have the SATA drivers on the disc. I understand that you just need to insert a floppy and push F6 I think but the problem is I don't have a floppy drive! Is there anyway I can slipstream the drivers into the install or something?
View 2 Replies
View Related
Aug 18, 2007
I wasn't sure where this thread should be placed. I want to install XP and it wouldn't detect my hard drive. Since I have no floppy drive I want to slipstream a xp cd with the drivers already there. I am using the program nLite to make the bootable disc. However the problem is that I can't find the drivers or i'm unsure what is correct. My controllers are... Intel(R) 82801HEM/HBM SATA AHCI Controller Intel(R) ICH8M Ultra ATA Storage Controllers 2850.. But chipset is Mobile Intel(R) 965 Express Chipset Family.
View 7 Replies
View Related
Jun 14, 2009
My motherboard died and I had my files password protected in Windows XP Media Edition, can I connect the SATA hard drive to another PC via USB and unlock the protected files, or does it have to run as the main drive to allow access and entry of password and then making all files public?
View 1 Replies
View Related
