Installing SATA Raid Drivers?
Dec 3, 2006
My computer came preinstalled with a whole bunch of HP garbage I didn't want.. So I bought a copy of WINxp pro and tried to install.. Upon doing this It couldn't read my hard drive, which I later determined was due to the fact it is a SATA hard drive and the XP install cd doesnt have the drivers for it. Solution was, I changed a setting in my computer's BIOS to change the raid mode to IDE instead of SATA, then the install proccess went fine. Problem is now I have to keep it at IDE, and if I turn it back to SATA the computer retstarts after the Starting Windows screen with the Windows icon, I assume this is due to the fact that Windows didn't bother installing any SATA drivers since I installed in IDE mode... Could somone please point me in the right direction as to what I need to install/configure to allow WIN to boot up with my BIOS using SATA mode?
View 5 Replies
ADVERTISEMENT
Oct 2, 2008
I need to repair my xp on my Sony VAIO VGN-AR11S and need to find HDD drivers to load while XP is loading using F6, I already tried Intel's divers and it not working
View 1 Replies
View Related
Oct 24, 2008
I'm trying to set up a dual-boot with Ubuntu and XP64. Initially I just had Ubuntu on my one sata hdd and XP on an ide hdd. I decided it'd be better running XP on the sata drive too, so I resized my linux partition with gparter, and created a new NTFS partition.The problem is, when I try to install XP onto the drive, it cannot seem to see the sata drive. Nothing was listed at all except the ide drives and my usb drive.I did some looking and found the 64 bit sata drivers for my motherboard, managed to load them onto a floppy and load them into the XP setup. This was all fine again until the time to select a partition, where it seemed to list the drive, but only shows 'Unknown disk' 'There is no disk in the drive'.I tried deleting the partition I made with gparter to see if XP could at least see the 'unallocated space' but to no avail.I even tried making a boot disk in nLite with the sata drivers, but it made no difference (not really surprisingly).If I try to use the 32 bit drivers that came with my mobo, it won't let me install XP.I'm all out of ideas to why it won't work.
View 4 Replies
View Related
Jun 20, 2010
installing xp on a sata drive as windows xp wont see the drive i know i need the sata drivers but cant find the rights ones for my board its gigabyte g31m-es2l chipset g31 express
View 6 Replies
View Related
Jan 30, 2010
i have 2 western digital 80gb on raid0. on this array i have installed windows 7 and now i want to install windows xp on another partition.the problem is that windows xp setup won't recognize my array even with the original raid driver floppy-disk. i created even an nLite customized xp with those drivers installed and it doesn't work.
View 4 Replies
View Related
Feb 15, 2008
I have a Dell XPS Gen 2 computer (3.2 GHz P4) in which I was running a striped RAID array (2x250). It had worked fine for about a year, when one of the drives failed (the original that came with the computer) so I thought it would be a good time to upgrade and change configuration, so I installed 2 new Western Digital SATA drives (500 GB). The computer recognized the drives and let me create a mirrored array, so I started reloading Windows. When I got to the F6 part I put in the floppy disk with the RAID drivers and now I keep getting this error messag The only other thing I've done to the computer recently was upgrade from 2 GB of RAM to 4 GB, but everything was working for at least a month before this happened so I assume it's unrelated.
View 6 Replies
View Related
Dec 28, 2008
I'm planning a reformat and clean install of XP Pro in the next few days. (Intel dual core with 4 GB RAM.)The OS has been living on C drive which is a Raid 0 setup consisting of two 250 drives operating as one 500.I also have a third drive (500GB) running as D drive (I do a lot of digital photography The Plan: To replace one of the 250's with a 500 so I'll have one 250 and two 500's.
View 3 Replies
View Related
May 17, 2007
I have a RAID system setup as JBOD on both drive in my laptop and I formatted using DBAN... Now i boot with Windows XP Pro so i can install it and it only recognizes one of my drives. I loaded my RAID drivers. I go ahead and try to install XP on it anyway. I tried to format the drive again using FULL format, i tried a Quick Format, and I also tried leaving it as is. It will install the setup files and reboot my computer. So i take out the XP disc but then it doesnt recognize any disks. Does anyone know how i can reintsall xP back on this sysetm or how I can get XP to recognize both my drives even if i slipstreamed my RAID drivers in it already.
View 12 Replies
View Related
Sep 20, 2008
Please help me with installing Windows XP on Dell T7400 with H/W RAID controller on 4 15k SAS harddrives. When installing windows I hit F6 to add optional RAID drivers and load this drivers using floppy drive, but Windows crashes anyway. The same is without loading optional drivers.
View 2 Replies
View Related
Jul 11, 2007
I'm trying to install XP on a new Fujitsu SATA hard drive (39T2785 R) in a Lenovo laptop (supplied with Vista on the original drive) and no diskette drive. The problem is that the only thing I can find for drivers is ONTRACK's Disk Manager...which creates a bootable floppy disk. I suspect the drivers are included in the .BIN file on the diskette, but I can't get to them.
View 9 Replies
View Related
Sep 6, 2007
I have an IBM Lenovo T61, with preinstalled Vista, I want to make an xp cd with the SATA drivers on, because it cant detect the hdd.I have been searching for a while, and some links tell me that I have to copy alot of files to a standalone folder, and edit txtsetup.sif and winnt.sif? is that right? I have a driver with a iastor.sys, but im wondering if thats the right driver.Yesterday, I made a boot cd, and it continued so I could format the hdd,( So I hoped it worked) But under the installation, it stop, because it couldnt find the driver.. include iastor.I have nlite, but dont know how it works.. Can someone plz tell me from the beginning of makeing a boot XP cd with my SATA drivers.
View 4 Replies
View Related
Sep 5, 2007
I have a custom made PC, with XP Home OEM. Since I lost the CD, I borrowed a friend's, but used my own product key. This seemed to be okay, untill it said something about having no hard disk/drive.I looked this up on the internet and people have mentioned SATA drivers. I think this is related to the motherboard? So will everything be okay if I get the SATA drivers for my motherboard? How do I find these? I looked on the Asus site, and it seemed too confusing.Incase you need to know, I have an Asus P5RD1-V
View 4 Replies
View Related
Jul 15, 2008
I have a Gigabyte GA-EP35-DS3R mobo. I don't need RAID but would like to use SATA AHCI mode (option in BIOS) which would allow actual SATA drivers instead of the IDE emulation (mode). All my hard drives and optical drives are SATA.I have found via google many old articles and instructions how to slipstream XP and SP2 but I have a newer XP SP2 CD. I just need to 'add' the SATA drivers that I can download from the Gigabyte driver downloads site.Does anyone know how to do this (i.e. slipstream XP SP2 w/ ICH9R SATA drivers?)?I read about using nLite and other programs/methods but I would like something simple that doesn't need floppies.
View 1 Replies
View Related
Jan 11, 2010
how to mix sata drivers for windows xp
View 3 Replies
View Related
Jan 1, 2006
Whenever i install drivers on my pc, (i've tried graphics card drivers and wireless network card drivers) my pc stops working. When i installed the graphics card drivers, i tried testing the graphics on a game (counter-strike) but as soon as i got into the game, the pc flashes a blue screen, and reboots. I cant see what the blue screen says because it flashes on and off again to quick for me to read it. I decided to uninstall the graphics card drivers, and the game worked perfectly, but the graphics were REALLY bad. So i thought i might need to update some other drivers, so i tried to install my wireless network card, but when i finished installing the drivers when i had to restart my computer, it flashed the BSOD.... AGAIN! I need help urgently as im going to a LAN gaming comp called "rezidue" and its on in 2 weeks, i need my pc fixed by then! All these problems started when i upgraded my CPU. Everything was running smooth, and i was happily playing along on my computer, when i was asked what my FPS was in counter-strike, and i was all "mine are 65!" and there like "wow that sucks, mines 130" so i set out on my epic quest to get better FPS then everyone else and MAN THAT WAS A MISTAKE. I upgraded from my celeron 2.8ghz cpu to a P4 3.0ghz HT cpu, and thats when things started messing up on me. My entire system is as follows (incase it can help someone help me) P4 3.0ghz HT CPU, Microstar P4 motherboard, 128mb Nvidia Geforce mx4000 AGP x8 graphics card, 256MB ddr ram (recently brought new 1GB ddr ram off ebay just for rezidue! should be here soon!) TP-LINK 54mbps wireless network card) And last but not least
View 13 Replies
View Related
Aug 3, 2005
I have a seagate 160gb sata hdd partitioned to 40 and 120 gb. With Windows xp Home sp2 on the 40gb. If i format the 40gb hdd will i have to reinstall the sata drivers
View 4 Replies
View Related
Oct 27, 2008
I have an Fujitsu Amilo M1437G and have lost the Repair disks - it has XP Home Two Choices - buy a new set Obtain the SATA drivers and slipstream them onto a cd with XP Home.
View 5 Replies
View Related
Mar 21, 2009
Will this motherboard: Asus m4a78 pro, need me to install extra sata drivers for winxp to support it? If so, where would i find them?
View 2 Replies
View Related
Aug 18, 2007
I wasn't sure where this thread should be placed. I want to install XP and it wouldn't detect my hard drive. Since I have no floppy drive I want to slipstream a xp cd with the drivers already there. I am using the program nLite to make the bootable disc. However the problem is that I can't find the drivers or i'm unsure what is correct. My controllers are... Intel(R) 82801HEM/HBM SATA AHCI Controller Intel(R) ICH8M Ultra ATA Storage Controllers 2850.. But chipset is Mobile Intel(R) 965 Express Chipset Family.
View 7 Replies
View Related
Aug 28, 2009
need floppy disks that already have the sata drivers loaded
View 1 Replies
View Related
Mar 9, 2008
I want to replace Vista with XP however my laptop has a SATA HD. I know that I can create a boot disk on either a floppy or a CD however I think it should be possible for me to install the drivers on an external USB HD? Before I format my drive I just wanted to confirm that this is possible?
View 6 Replies
View Related
Jul 11, 2005
when i first installed windows and what not i had a floppy drive installed.i need to do a windows repair and to do so i need to install these external sata drivers for my hard drives.i do not have access to a floppy drive and i would like to know if there was anyway to get around using the floppy drive to install these drivers one question i had was would i be able to change the drive letter of one of my dvd drives to A so that windows will install from there instead of an obsolete floppy drive A.
View 9 Replies
View Related
Mar 17, 2007
i have a p5s800-vm mother board of asus and the setup of windows xp (pro-sp2) dont find my hard disc and i need to make a floopy from the drivers on the disc to help it found the hard disc. that what i do to make that floopy (as some nice guys here tell me to) i go to the drivers folder on the disc of the motherbord than chose "raid" folder in it i chose the floopyimage folder there i have 3 folders
1.964plus180(181)
2.964_180
3.965_965L
the guys here tell me to put the files of the 965_965L on the floopy without the foler imself. so in the 965_965L folder i have two files "SISRAID and "TXTSETUP.OEM" and aonter folder calld "raid" and in it i have to folders "winxp" and "win2000" and each folder has its own file. so what i do was to put only the "TXTSETUP.OEM" file on the floopy without noting else cause someone here tell me it all i need to do......
View 6 Replies
View Related
Sep 4, 2007
I am trying to install windows XP Pro on a Dell Dimension 9200 with SATA drives. I have tried the F6 but I don't have a floppy drive, is there a way to use a USB thumb drive, to provide the SATA driver?
View 3 Replies
View Related
Feb 25, 2006
It's looking like I have to re-install C+XP Pro SP2. I have never installed XP Pro SP2 before myself on SATA drives - I know that you used to have to get the hard disc drivers from somewhere first so you could use them in the set up process. I've never done this either! Is this still an issue with XP SP2 (I have a full install Windows XP Pro SP2 CD). If so, could someone outline the details for me or point me in the right direction web wise.
View 3 Replies
View Related
Dec 19, 2004
I'm trying to install Windows XP on my new Serial ATA hard drive, it has been formatted everything seems ok, When I start installing windows XP pro on this machine it seems like it just can't detect the damn hard drive, when I set it as boot on te serial ata drive eeverything works fine, it goes as C:/ but I just can't switch to my cd drive with windows XP to install it.When I boot up my other hrd drive with windows xp, I can actually see my hard drive in windows explorer.
View 3 Replies
View Related
Aug 19, 2007
I've read all the reports and "in theory" I know what I need to do. However, I haven't been able to pull it off yet. Here goes:
I hate Vista. I'm installing XP.
I have a SATA drive. I don't have a floppy drive.
I believe I can do it in the BIOS.
I've changed the HD setting in the BIOS from SATA to ATA (my only choice). XP installs fine. But now I need to change it back to SATA. I do that, restart and I get the blue screen with an automatic restart. I'm sure I need to add the SATA drivers somewhere, but I'm not sure where or how.
View 14 Replies
View Related
Apr 11, 2008
I've looked around and I'm having a hard time finding good info on this. I've looked up stuff like slipstreaming SATA drivers into the windows disc, but I don't think I'm doing it right. I got the correct SATA drivers from gateways website. I'm pretty sure this system just uses the intel SATA Chipset. Any way if anyone could help me install XP on my Gateway C-141XL laptop without having a floppy disc I'd really appreciate it.
View 2 Replies
View Related
Mar 6, 2010
I re-formated my sisters computer yesterday, and after installing it i had no internet. As i hadn't installed any drivers yet, i understood that. But after heading over to dell's site, downloading all of the drivers for her computer and then installing them, i STILL do not have any internet. I don't see any connections on the computer either, it's just blank!
View 4 Replies
View Related
Jun 7, 2010
I have a Gateway ML6720 notebook that came with Vista (processor: Intel Dual-Core Mobile Processor T2310 1.46 GHz and memory: 1024 MB 667 MHz DDR2 SDRAM (2 512) Operates at 533 MHz). This laptop does not come with a floppy nor do I have a usb floppy! I would like to "UPGRADE" to win XP Home but the hard drive isn't seen because it's missing the xp sata drivers. I already went to gateways driver site and downloaded the 32bit sata/ mass storage controller, the chipset wich supports XP and the Sigma Tel Audio Driver. I am going to use "nlite" to slipstream the drivers into the XP install disk but have a few questions because I have never done this. First, do I need to insert all drivers into the xp install or just the sata/ mass controller? And If anyone has ever done this could I get you to walk me through it?
View 11 Replies
View Related
Aug 2, 2005
I was wondering if it makes any sense to buy and install a SATA 300 controller to work with two WD SATA 300 drives. I kind of doubt I will achieve 300mb buffer to host transfers with only SATA 150 motherboard.
View 6 Replies
View Related
