I'm planning a reformat and clean install of XP Pro in the next few days. (Intel dual core with 4 GB RAM.)The OS has been living on C drive which is a Raid 0 setup consisting of two 250 drives operating as one 500.I also have a third drive (500GB) running as D drive (I do a lot of digital photography The Plan: To replace one of the 250's with a 500 so I'll have one 250 and two 500's.
View 3 RepliesI have been trying to install a RAID setup and I can't get past the windows installation. I have set up the BIOS correctly and I've tried using 2 different RAID floppys and still won't setup. I start the windows installation and at the F6 prompt I press the F6, when it asks for the drivers I press S and first load the Nvidia RAID driver and then again I load the Nvidia storage driver as per instructions and the installation goes until it starts the windows set up and stops right there. If I only load the Nvidia Raid driver then the set will start. The second floppy I tried using was for SATARAID floppy. Same result If I load the Nvidia SATA storage driver then It stops at Windows installation setup. I have tried installing a bootable setup and a nonbootable with no luck.
View 14 Replies View RelatedHI, I just installed windows 2000 professional onto my computer. Everything works fine except that the resolution is really grainy. On some web sites I cannot even make out what the words are. I found out that when I go into my monitor settings in display properties I am unable to install the drivers for my monitor. Does anybody know a way in which I can get around this.
View 1 Replies View RelatedI have a HP laptop that once ran on Vista. This summer before I left for college,I decided that it was finally time to downgrade to XP,seeing as I had backed up everything, and classes would be starting in a week.So I did the usual thing. Insert CD, restart computer,"A problem has been detected, and Windows has shut down...."Blue Screen of Death. The Stop Message: 0x0000007B (0xF78D254, 0x00000034,0x00000000,0x00000000)
View 7 Replies View Relatedve just reinstalled the operating system on my pc as it was running very slow and kept hangin,all is working fine but i now have no sound through my speakers at all,and cannot find the drivers disk for my motherboard how can i get my sound back
View 4 Replies View RelatedI got a new SATA 320 GB hard drive today, since my other one died. I setup the drivers for it with help of the Windows XP disc, and start to install Windows.
I get to the part where I enter the product key, and I get a prompt that it is invalid. I have entered the key at least 40 times to make sure I haven't mistyped it. I have looked at the Windows Support page and search around
So I think I was affected by the SP3 update. I went out and got another harddrive to reinstall on since the other harddrive wouldn't even boot up. I can format the disc and the setup files load and then the system does the reboot. But after it reboots it ask me if I want to install XP and it takes me through the prompts of which drive I want to partition.
View 13 Replies View Relatedjust did a fresh install finished the MSDOS portion of the setup and then restarted
then when it restarts its says press f8 to agree...
then says "loading information file setupp.ini" then it says setup could not read the cd you inserted and does not read the cd now im stuck here
I just finished preparing my slipstreamed windows XP setup disc with the SATA drivers already on it for my nForce 4 SATA RAID setup. It will detect the drives, just fine, but displays each one as though there were no array. I've already set up the RAID array in the bios, and it detects it as a single 500gb striped RAID-0 array.Windows is asking me to install on either one drive or the other, as though there were no RAID-0 array. If this is what usually happens, would I just point windows to install to one of the drives and the BIOS will take care of the rest? Or is something else not quite right here?
View 2 Replies View RelatedI just installed a fresh copy of Windows XP service pack 2 and for some reason the sound doesn't work.
http://support.gateway.com/s/PC/R/3724/3724sp25.shtml
Here is my computer. I tried downloading the sound drivers and restarted ,but I'm still not getting any sound
My computer came preinstalled with a whole bunch of HP garbage I didn't want.. So I bought a copy of WINxp pro and tried to install.. Upon doing this It couldn't read my hard drive, which I later determined was due to the fact it is a SATA hard drive and the XP install cd doesnt have the drivers for it. Solution was, I changed a setting in my computer's BIOS to change the raid mode to IDE instead of SATA, then the install proccess went fine. Problem is now I have to keep it at IDE, and if I turn it back to SATA the computer retstarts after the Starting Windows screen with the Windows icon, I assume this is due to the fact that Windows didn't bother installing any SATA drivers since I installed in IDE mode... Could somone please point me in the right direction as to what I need to install/configure to allow WIN to boot up with my BIOS using SATA mode?
View 5 Replies View RelatedI have a Dell XPS Gen 2 computer (3.2 GHz P4) in which I was running a striped RAID array (2x250). It had worked fine for about a year, when one of the drives failed (the original that came with the computer) so I thought it would be a good time to upgrade and change configuration, so I installed 2 new Western Digital SATA drives (500 GB). The computer recognized the drives and let me create a mirrored array, so I started reloading Windows. When I got to the F6 part I put in the floppy disk with the RAID drivers and now I keep getting this error messag The only other thing I've done to the computer recently was upgrade from 2 GB of RAM to 4 GB, but everything was working for at least a month before this happened so I assume it's unrelated.
View 6 Replies View Relatedmy daughters computer needs to have windows xp pro reinstalled. the computer used to have a raid setup but when one of the hard drives started to fail she brought it to the computer shop and they disconnected the raid and told her the drives were separated but not to put anything important on the one drive as its not so good. so last night we tried to reinstall windows . It came to can not read drive F. Options were fail, abort or retry. Nothing worked. so she called the the computer shop and they said it was because of the raid thing when. So they told her to go to gateway sight and put a program called serial ata on a disk and install it to her computer...
View 14 Replies View Relatedi have 2 western digital 80gb on raid0. on this array i have installed windows 7 and now i want to install windows xp on another partition.the problem is that windows xp setup won't recognize my array even with the original raid driver floppy-disk. i created even an nLite customized xp with those drivers installed and it doesn't work.
View 4 Replies View RelatedI recently bought an xp home edition disc and did a fresh install on my computer because my old installation that came with my Packard Bell iMedia got completely messed up over time Anyway, I have now no drivers for anything. I downloaded the correct nvidia driver, which was easy to locate and which fixed numerous problems. However, windows doesnt ever know the logitech speakers are there.
View 14 Replies View RelatedI've been getting a lot of BSOD on my XP notebook (P4 3ghz, 784 ram). Sometimes it will say an ACPI.sys error, or a Bad Pool Caller, etc.I've done some looking and it seems it's a bad driver (well, other posts say that). How do you go about finding which driver it is? There's gotta be 100s of them.....
View 2 Replies View RelatedBought pc it came with something called RAID TOOL i have no idea what this is but, if i was to reinstall windows would it be crucial that this was reinstalled with it? or could i just reinstall windows xp from the disc and not worry about it?
View 6 Replies View RelatedI've setup Windows 2003 fax services on a W2K3 server and shared the device. I've tested faxing from Word on my PC and it works fine.However, when other users try to install the fax client, the setup hangs asking for the fx* setup files. I've tried different XPSP2 CDs, copying the files to a local directory, making sure that the users have local admin rights (and even domain admin rights) but to no avail. The files are already in the system32 directory so in theory the setup doesn't even need to copy them. Even if I delete them, it doesn't work.Our corporate SMS team reckons that there isn't any policy which could
cause the problem.
I have just installed a fresh copy of windows XP sp2 on 2 machines. Both Dell Optiplex desktops. Usually it prompts that it has found new hardware for each device it hasn't found drivers for. Device manager lists them with a yellow exclamation icon.Problem I have now though is that the fresh install of XP does not show these prompt at all, although device manager lists them and if i go in there and update driver the device works.The problem I have is that basically i usually copy a driver heirarchy to the systemdrive and point the registry at them, which results in automatic installation on boot. This no longer works and I assume they are related as it doesn't look like it's automatically trying to install these devices.Is there a setting somewhere, seems very strange, what with it being a fresh install?
View 11 Replies View RelatedI purchased a SIIG PCI firmware adapter. It has no drivers and says that it will use Win XP drivers. Well I installed the board and booted the pc, Win XP
recognized the hardware but could not find any drivers. I tried unplugging it manually, installing it in another card slot with no luck. I took it back to
my pc dealer and he plugged it in his system and had no problems. I decide to try another brand, an IO Gear GIC1394.
I have two computers, one I use for gaming, the other for school. Both computers had 60gb Maxtor (school with lots of room, gaming with about 10 gb free). My school HD took a powder (the evil clicky noise of doom), but I was able to back up my files prior to that. Me being a quick thinker, I decide to upgrade my gamer puter to a 120gb (don't wanna go too nutso, as I am considering building a much superior computer), and put the good 60 gb in my old Athlon 700. Problem? I cannot get Windows XP Home to complete install on my gamer computer. (Athlon 700 installed just fine with 'good' 60gb).Gamer Computer: Athlon 1800+, 512MB DDR Ram 2100, KR7A Raid MOBO, GeForce3 Ti 200 (128MB DDR RAM), SB Audigy 2(AGP).
It is a RAID mobo, but i do not use the raid functionality, I did not have a problem before(I have my HD and my 2 roms on ide now). I go through the install steps, and I get to the very very end, where it states you are about to start Windows XP, and then it hangs, and thats it.I have tried to ensure there are no conflicts, I pulled out my sound card as well as my network card, and 're-seated' my video card and RAM. I have tried looking at using a winxp bootup floppy, booted into safe mode (the only error it detects is the missing RAID, no conflicts detected there). Heck, I even swapped out mouse and keyboard. I tried putting back the good 60gb back in the pc, and reformatting, but still get the same thing(sometimes the screen is black, sometimes the icky blue of xp, but that's it).I have no idea now. I did make sure that my bios was up to date before taking down the system originally, and it was, so no change was made there. Even swapped out the ribbon cables to ensure nothing was damaged on original removal.
Wanted to do a fresh install. I want to wipe the HD clean before I start a clean install. Any programs out there for doing this?
View 7 Replies View RelatedI want to do a fresh install of MS xp pro. The problem is I have a newer version of xp installed right now and the xp cd i have is a older version( legit cd). Because of that it won't let me re-install xp using the older cd. I do have sp2 just on a different cd. So how can I go about doing a fresh install? The reason i'm doing this is because my computer is running sluggish and I want to start over sort of speak. Any ideas what I need to do? I have the bios to boot from cd. I also get a error message that the NTLDER is missing. I've been on other forums and so far no help from them.
View 1 Replies View RelatedI've been trying to reinstall a fresh, liscenced copy of XP (sp2), but when I get the windows disc to boot, my keyboard won't work. I've tried to keep in both the usb port and to use the adapter to stick it into the dedicated keyboard slot - no luck with either. Do I have a driver issue? Under admnistrative tools/computer management/keyboards/hid keyboard device/driver/driver details, I have two different driver entries: the highlighted one on top says WINDOWS/system32/DRIVERS/kbdclass.sys and the unhighlighted one below it says WINDOWS/system32/DRIVERS/kbdhid.sys. I seem to remember adding or updating my keyboard driver at some point, but I'm not entirely sure. Can I/should I restore the kbdhid.sys driver, and if so, how do I do that exactly? Do I have some other issue? A USB driver issue perhaps? I have a number of different usb drivers as well.
As a corollary, when booting with a bootable disc (the XP disc and with my BIOS set to boot from disc first), the program asks to hit any key to boot from disc. With my keyboard plugged in normally (to the usb port), I get no response at that stage. Using the adapter, plugged into the dedicated keyboard spot, I CAN get a response, but then get no response (from either usb or dedicated keyboard connector.) when the XP disc boots up to the blue option screen.My computer knowledge is adequate but not extensive. I did build my system, but it was my first build.
I'm doing a fresh xp install on an older hp ze5700. I am able to get the machine to recognize the cd drive initially and go thru the install up until it has to reboot to set up windows. then it seems the laptop does not recoginze the cd drive and freezes on the 'setting up windows' part.
View 5 Replies View RelatedI have an athlon 1.2 asus a7a266 motherboard and 80 gig HD with XP and want to do a fresh install so I can pass it on without easy access to any past personal data.It still has a floppy and all my old boot discs say the files such as fdisk and format are not compatable with this operating sys.I made a boot from the computer but it doesn't have formatting software included.One I get it formatted with CD support I'll be on my way.
View 2 Replies View RelatedMachine is an HP pavillion, 1gb of ram, running XP. I would like to do a fresh reinstall to clean out some of the gunck stuck on this pc. What would be the best way to do this?
View 2 Replies View RelatedI recently got some virus which kept on duplicating, so my AVG antivirus could not permanently delete. So I did a clean reinstall of Windows XP Pro 32 bit with a full reformat. It is still very buggy. Some of the bugs even resemble the errors I was having before the reinstall. There were things like "could not load cmd.exe", AVG antivirus marking almost every Window's .exe as a Heur virus, "could not load login because of data execution prevention", and programs like Windows Media Player 11 and Visual Studio not being able to be completely installed.
Should I be concerend that this is a hardware issue? The harddrive should be OK because a full format should have detected bad sectors. Maybe my RAM is damaged?
I have just done a fresh install of Windows XP - all is fine.Question - I am just downloading 92 updates from the M/soft site!!! Is there anyway to get hold of these and burn them to a CD so next time.
View 4 Replies View RelatedI'll buy a new motherboard with video card, cpu and memory but I will keep the old HDD. My old mobo is burnt so I can't boot the PC. I want to do a fresh install on C: but I have some data that I need. I have a few ideas but I don't know if they'll work.
1)Can I use Windows XP Live USB edition to boot with the new mobo, copy the data from C: to another partition and then do a clean Windows install(well, only the C: partition)?
2)What if I do a Windows Repair Install, copy the data from C: to another drive and then do a clean install?(I don't think this is a good option because the user settings and program files will be deleted and I want to keep them so I will know what apps will I have to install.
Trying to do a completely fresh install of XP on a mates computer. I have booted from 2 seperate windows xp discs (both of which have worked fine previously). It gets a small way into the setup (just past RAID drivers etc) then asks "Please insert Windows XP Disk 2 or whatever (depending on which windows version) in Drive A: and press any key to continue." I have never had this happen before and am not sure how to get past it.
View 5 Replies View Related