Raid Setup Hard Drives Started To Fail - Computer Disconnected
Aug 4, 2009
my daughters computer needs to have windows xp pro reinstalled. the computer used to have a raid setup but when one of the hard drives started to fail she brought it to the computer shop and they disconnected the raid and told her the drives were separated but not to put anything important on the one drive as its not so good. so last night we tried to reinstall windows . It came to can not read drive F. Options were fail, abort or retry. Nothing worked. so she called the the computer shop and they said it was because of the raid thing when. So they told her to go to gateway sight and put a program called serial ata on a disk and install it to her computer...
View 14 Replies
ADVERTISEMENT
Dec 13, 2005
I have a major problem with my Packard Bell iMedia D815AW home desktop. Ever since I installed a Lite-On DVD-RW into it, it started making a lot of noise (a bit like the sound of a typewriter tapping) and started crashing. I removed the DVD-RW drive, only for the problem to continue. The computer kept crashing (often showing the blue crash screen, other times showing a black 'insert floppy disk' screen, sometimes just restarting itself). Running the Windows disk check utility at start-up would not work - the computer would freeze while the disk scan occured (I tried many times). I ran disk registery programs (ie- Registry Mechanic, etc), anti-virus software, defragmentation, etc. etc. but the problem remained. Yesterday, I decided I would try reinstalling (or restoring?) Windows XP again (with the intention of fixing the problem without deleting my personal files on the computer). However, upon instertion of the disk, Windows XP claimed it could not reinstall, as the Windows version on my computer was too recent. I assumed that the reason for this was that I had installed Windows XP Serice Pack 2 and so the version was too recent for the installation disk. So, I thought I would uninstall service pack 2 and then try to reinstall Windows XP. However, while uninstalling service pack 2, the computer crashed. Since then, whenever I try to startup Windows, the computer restarts after about 30 seconds of loading. I can enter the startup screen which gives you access to entering through Safe Mode, Debugging, etc - however entering through these modes has the same problem though with the computer restarting before reaching Windows. So, I entered the computer BIOS at startup and changed it to load via CD, inserting the Windows XP disk. I tried to use the 'Recovery Console' option, however the error message "Setup did not find any hard disk drives installed in your computer" showed. It then asked me to restart the computer by hitting F3. I then tried to use the Windows install option by restarting the computer and loading the Windows XP disk, but the same "Setup did not find any hard disk drives installed in your computer" message showed. So, i cant load the computer, nor reinstall the software. I dont want to lose all the files on my computer.
View 9 Replies
View Related
Apr 10, 2010
I have this PC and the current HD has a virus on it, so I am trying to format with a new copy of Windows XP SP1. The hard drive is an IDE and the jumper is set on CS. But when it goes to install Windows, it tells me "Setup did not find any hard disk drives installed" I thought this was a problem with SATA Hds???? It's a built PC, the motherboard is a ASUS P5GD1-VM
View 15 Replies
View Related
May 24, 2008
I am attempting to get into my Dell Dimension 8400. It may be I am having problems due to the SP3 update but I cannot get in to see if it is there and uninstall it. (It started going to the blue screen and I cannot do anything from any of the safe mode screens...they are just black with "safemode" in all 4 corners.) I have read up on the SP3 problems on the microsoft forums and found instruction on how to take care of it. It starts with the Recovery Console and the XPCD.
I get in there and it goes directly to "Setup loading files". When it tries to start windows I get this message: Setup did not find any hard disk drives installed in your computer. Make sure any hard disk drives are powered on and properly connected to our computer, and that any disk related hardware configuration is correct. This may involve running a manufacturer supplied diagnostic or set up program. Setup cannot continue. To quit
View 14 Replies
View Related
Oct 29, 2008
startup says: 1 Logical Drives found on the host adapter. 1 Logical Drive(s) handled by BIOS This computer previously had Microsoft Small Business Server 2000 installed on it, but by the time I received it, someone had replaced the OS with Ubantu.
Dell PowerEdge 1600SC
Intel Xeon 2.4GHz
2 x 36Gb HDD
1Gb RAM
View 2 Replies
View Related
Feb 13, 2007
I have a Dell PC. I installed a copy of Windows Vista on it. I don't like it, so I am trying to reinstall XP Home. When I click on the cd drive the XP Home CD is in, it brings up the menu, but the "Install Windows XP" option is grayed out. I try to boot from the disk, but when it is done loading all the things and I tell it I do not want to repair, but to install, it says "setup did not find any hard disk drives installed on your computer" and makes me reboot my computer. Vista still works fine, I know the Hard Drive is working
View 18 Replies
View Related
Dec 9, 2006
I'm going crazy with this issue and I cannot find any possible solutions. I hope someone in here can help me somehow.Let me explain what's my situation. I have a SATA drive (WD 160GB) I had Windows XP installed on my machine until yesterday that I decided to try a beta version of Vista. Now, I want to get rid of Windows Vista and install XP again. However, when I insert my CD to boot, after it loads all the files,etc...It shows me this message Quote: Setup did not find any hard disk drives installed in your computer.
Quote :Make sure any hard drives are powered on properly connected to your computer,and that any disk-related hardware configuration is correct.This may involve running a manufacturer-supplied diagnostic or setup program. Setup cannot continue. To quit Setup, press F3.
View 10 Replies
View Related
Sep 9, 2007
I have been trying to install a RAID setup and I can't get past the windows installation. I have set up the BIOS correctly and I've tried using 2 different RAID floppys and still won't setup. I start the windows installation and at the F6 prompt I press the F6, when it asks for the drivers I press S and first load the Nvidia RAID driver and then again I load the Nvidia storage driver as per instructions and the installation goes until it starts the windows set up and stops right there. If I only load the Nvidia Raid driver then the set will start. The second floppy I tried using was for SATARAID floppy. Same result If I load the Nvidia SATA storage driver then It stops at Windows installation setup. I have tried installing a bootable setup and a nonbootable with no luck.
View 14 Replies
View Related
May 17, 2007
I have a RAID system setup as JBOD on both drive in my laptop and I formatted using DBAN... Now i boot with Windows XP Pro so i can install it and it only recognizes one of my drives. I loaded my RAID drivers. I go ahead and try to install XP on it anyway. I tried to format the drive again using FULL format, i tried a Quick Format, and I also tried leaving it as is. It will install the setup files and reboot my computer. So i take out the XP disc but then it doesnt recognize any disks. Does anyone know how i can reintsall xP back on this sysetm or how I can get XP to recognize both my drives even if i slipstreamed my RAID drivers in it already.
View 12 Replies
View Related
Dec 17, 2005
I just finished preparing my slipstreamed windows XP setup disc with the SATA drivers already on it for my nForce 4 SATA RAID setup. It will detect the drives, just fine, but displays each one as though there were no array. I've already set up the RAID array in the bios, and it detects it as a single 500gb striped RAID-0 array.Windows is asking me to install on either one drive or the other, as though there were no RAID-0 array. If this is what usually happens, would I just point windows to install to one of the drives and the BIOS will take care of the rest? Or is something else not quite right here?
View 2 Replies
View Related
Dec 28, 2008
I'm planning a reformat and clean install of XP Pro in the next few days. (Intel dual core with 4 GB RAM.)The OS has been living on C drive which is a Raid 0 setup consisting of two 250 drives operating as one 500.I also have a third drive (500GB) running as D drive (I do a lot of digital photography The Plan: To replace one of the 250's with a 500 so I'll have one 250 and two 500's.
View 3 Replies
View Related
May 7, 2006
i have three hard drives : 1 Hitachi 250 GB Sata 2 on Nvidia Controller 2 Samsung 80 GB Sata in RAID O on Silicon Controller 1. the problem is when i boot into windows the LAN connection (two small monitors in the taskbar) takes atleast 10 minutes to show !! and theother problem is that until tht two monitors dnt appear i dnt get any reply frm right clicking any of the drives to see their properties and frm My Computer too, but as soon as the two small monitors come all the properties just pop up.
2. Sometimes suddenly in between Windows shows Write Delayed Failed Error only on the Raid Drives and i cnt access them afterwards,restarting solves the problem tho but jst for sumtime.
View 6 Replies
View Related
Jan 18, 2007
I'm in the process of building a new computer to replace my old AMD 2800+ system. I would like to use one of my old hard drives that has all my files and programs on it without having to do a complete reformate and fresh install of winxp. Is this possible? and how do I go about doing this?
View 3 Replies
View Related
Mar 29, 2007
Can you have more than one copy of XP on the same computer with two hard drives, that can be validated please.
View 14 Replies
View Related
Sep 23, 2006
I have transferred a Hard Drive into another computer and thought I had to re-install Windows (XP Home) - this I did.In so doing I created another Folder - Windows2 so as not to overwrite anything. I have a Windows folder as well.I also still have a Windows98 Folder on this drive.I cannot access the latest e-mails in the new configuration - or anything else for that matter and know that I am going to have to reinstall all programs.How and where do I find those missing e-mails, or can I uninstall this new version and revert to the old one?
View 10 Replies
View Related
Dec 5, 2006
I was hit by a virus and now I can't access my hard drives from My Computer. I get a message "Windows Script Host" and "cannot find script file, "C:autorun.vbs" when I click on my "C" icon. Right clicking gives me gibberish in the menu box where the "Open" should be. I can still get through to the contents via My Documents and up-leveling.
View 11 Replies
View Related
Dec 4, 2005
I have an HP Pavillion zv5000.Windows xp sp2.I was online and the laptop and got a blue screen of death
don't recall exactly what it said, something about ie encountering an error and needing to shut down.Went to reboot, and it tried to boot off of LAN.checked my BIOS everything seemed fine, disabled that boot option.
Tried to reboot again, got a plashing flat cursor in upper left hand corner.Tried to use Norton Disk, scanned memory only.Did not scan boot.Tried to use XP disk to repair, and it came up with screen saying that
it could not find any hard drives on this computer.What happened to me, is it viral, or hardware.This laptop is only a year old, but no longer under warranty.
View 12 Replies
View Related
Nov 28, 2005
Ive been getting alot of help with this RAID stuff and RAID 0 is looking to be my best choice. Heres the thing: I got a new Hard drive thats the same size as the first 2 I got. I have the option on my motherboard to RAID but I have hit a wall on what the RAID will do. If I were to put this HD on a RAID would it be its own drive still with the RAID structure or if I were to put it on there with another HD would both be made into 1 HD? I just have the other 2 on a simple SATA connection with no raid and its working good. I just would like to speed it up a little more mainly as I do most of my backups on DVDs. Would it be wiser to just skip the RAID since im doin backups on DVDs or would the RAID be a good option?
View 6 Replies
View Related
Jul 25, 2009
everytime i plug in a usb/external hardrive, it isnt recognized in my computer, its not too do with any hardware, im 100% its a software issue, and i was running a program and it seemed to do something nothing comes up in my computer but you hear the connected sound, ive tried assignign a manual drive letter but it comes up with an error. and seeing as i cant back anything up because nothings regonized
View 14 Replies
View Related
Jun 5, 2006
How do I install 2 hard drives from seperate computers into 1 computer? I have tried the plug and play routine without success. Both hard drives have the XP OS on them and they work in their respective chassis. I know that one will have to be the master and the other the slave but I am not sure how to set everything up. Additionally, their are many programs and drivers on the prospective slave that need to be accessible.
View 1 Replies
View Related
May 19, 2008
I just tried to reformat and install windows XP home edition, and upon coming to the screen of "Repair" or "Install fresh copy" I received an error reporting:Setup did not find any hard disk drives installed in your computer.Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program.Setup cannot continue. To quit setup, press F3.I was trying to use ubuntu but my ram wasn't high enough, so now it won't let me run windows xp again.
View 16 Replies
View Related
May 9, 2005
I recently was forced to do a re-install of XP to clean up a few bugs.The system has 3 hard drives, but since the reinstall, only the C: drive appears. The other two are nowhere to be found.I've tried mapping to them, but they just don't show up there as a mapping option.Anyone have any advice? When I added the extra hard drives I didn't have an available slot and did have to create a partition. I no longer have the software I had originally used though. Do I need it to make the 2 other drives visable?
View 1 Replies
View Related
Jan 30, 2010
i have 2 western digital 80gb on raid0. on this array i have installed windows 7 and now i want to install windows xp on another partition.the problem is that windows xp setup won't recognize my array even with the original raid driver floppy-disk. i created even an nLite customized xp with those drivers installed and it doesn't work.
View 4 Replies
View Related
Jan 23, 2009
My hard drive crashed. When I start up, the device info is supposed to say something like:"Maxtor 2B020H1" but instead I get "Maxtor eph7 hgnk78l" note: the odd device name isnt exact, but I could write it down and post it if it helps.This all happened when I unplugged the ribbon cable from my m/b. -dont ask- lolWhen I plugged it back in I got that message.I have confirmed it is the hard drive itself, by trying it in a different computer.My second problem is, that was my primary master hard drive. I did not have the operating system on that hard drive but, that hard drive contained the xp boot record or ntldr .
View 5 Replies
View Related
Sep 28, 2010
When trying to down load from my video camera to a disc, I get the message writer disconnected? How can I solve this
View 1 Replies
View Related
Jan 2, 2005
I have seen this messge twice. Once on a friends PC and just now on mine. My computer has been running for maybe... 3 days straight now. I turned it off for about 3 hours to keep my room cool. I turned it back on an heard "beep...beep...beep...beep" (the same beep you hear if the ram isn't snapped in the socket all the way) and at the boot up it said "Primary slave hard disk fail" XP would not start. So i hit the reset button, same thing, hit it again, same thing. Powered off and powered back on and it started up fine.
View 1 Replies
View Related
Apr 7, 2004
I'm running remote desktop on Windows XP which ran fine for awhile. Now I get this error. "The remote computer disconnected the session because of an error in the licensing protocol. Please try connecting to the remote computer again or contact your server administrator." The Microsoft knowledge base had this to say
"Cause: The licensing protocol handles the communication of licensing information between your computer and the remote computer. If there is an error in the licensing protocol, your computer cannot be connected to the remote computer. Solution: Try connecting to the remote computer again. If you continue to receive this error message, contact the server administrator"
I'm the server admin, and I can't figure this out. Please help! Where do I check to see if my license has expired? It's such a strange problem because I can connect to other servers in the domain, just not terminal servers.
View 1 Replies
View Related
May 19, 2007
The Dell 8250 Pentium IV computer will not recognize the new master 160 GHZ or the origional, now slave, 40 GHZ, Hard drives. All the connections and jumpers are installed correctly. I tried a new motherboard and a new cable, both did not resolve this problem. Even ran a diagnostic program called "Tuff Test", running at boot up and the RAM and all other items checked OK, showing all working properly. The BIOS, now set to boot up correctly, off the proper drive, seems to recognize both removable drives and the floppy, but not the hard drives.
When I received the computer it was password protected. after asking and waiting for a week, with no response, I therefore, in safe mode,entered the BIOS and chose for it to boot off of the CD Rw that I thought was the proper and shut the Hard Drive off. Here the CD RW was a slave and not the master. No luck in installing the OS. I bought a new 160 GHZ HD with the thought that I could load the OS, again no luck. I replaced the battery and tried again with no luck.
View 1 Replies
View Related
Mar 4, 2008
I had to do an reformat on my PC. Before the reformat, my PC read both my external hard drives no problem. Then after the reformat, it only would read one. When I would restart with both connected, it wouldn't budge from the welcome screen. After I would unplug the "questionable" one, it would then allow me to log in as usual. I think it could be a driver issue but I'm not totally sure because it does read it after a little while. I changed the USB cable, so for now, it is holding. Can anybody figure out what it might be?
View 2 Replies
View Related
Sep 12, 2008
My computer has started to tick lately. I clicked the fans in the back of the computer and ran all spyware everything OK.Sometimes a screen comes up saying physcial memory dump taking place, and then suggesting perhaps i've installed or uninstalled a program incorrectly.I don't know what else to do ...is my hard drive kicking the bucket?
View 8 Replies
View Related
Apr 10, 2005
My PC has recently started hanging during startup. It usually happens before the Windows XP logo appears. The startup process just stops, the screen stays black, the hard disk drive goes quiet and the activity light stays on (rather than the normal flickering).All I can do when this happens is hold down the power button until the power goes off.Also, when it does startup properly, after logging into XP it takes an unusually long time to load the settings,startup programs, etc and sometimes some of the normal system tray icons dont appear at all
View 14 Replies
View Related
