I recently was forced to do a re-install of XP to clean up a few bugs.The system has 3 hard drives, but since the reinstall, only the C: drive appears. The other two are nowhere to be found.I've tried mapping to them, but they just don't show up there as a mapping option.Anyone have any advice? When I added the extra hard drives I didn't have an available slot and did have to create a partition. I no longer have the software I had originally used though. Do I need it to make the 2 other drives visable?
I have an old T1090 eMachine that doesn't recognize the new larger hard drives. I purchased a 200 GB PATA (IDE) drive and it shows up as a 75 GB drive using GParted and under Windows Disk Management. I expected that it would only be recognized as 137 GB, but I can't explain why it only sees 75 GB. I suspect that the BIOS needs to be updated, but I've never done this before so I was looking for a procedure and ideas for trying to find the latest BIOS online.
I keep getting this error "One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it". And if I leave my PC on to long the keyboard, mouse, and sometimes even the monitor stop working. I've tried unplugging the keyboard and mouse (which are not USB) and plugging them back in, but to no avail.
I am running XP Pro on my computer. On another drive I have windows 7. My computer stopped booting to my XP drive all of a sudden, but it would let me boot to my Windows 7 drive. That lasted for about 3 days. Now I can't boot to either drive. When I start the computer it says there is no HDD. I tried to use the XP disk to repair, that didn't work., so I thought I'd do an XP install. But my hard drive doesn't show up all the time. Or it will show the HDD but upon trying to pick a partition to set up XP in, it then tell me there is no HDD. I get the blue screen of death, and have to manually force a shut down. Other times it tell me that the HDD is RAW, and it needs to be formatted. How can I get the HDD to format? Is there a way to do it through DOS. Sometimes I can't even get to the DOS prompt. The bootup section is corrupt. I need to repair it, but can't if the system doesn't see my HDD.
The Dell 8250 Pentium IV computer will not recognize the new master 160 GHZ or the origional, now slave, 40 GHZ, Hard drives. All the connections and jumpers are installed correctly. I tried a new motherboard and a new cable, both did not resolve this problem. Even ran a diagnostic program called "Tuff Test", running at boot up and the RAM and all other items checked OK, showing all working properly. The BIOS, now set to boot up correctly, off the proper drive, seems to recognize both removable drives and the floppy, but not the hard drives. When I received the computer it was password protected. after asking and waiting for a week, with no response, I therefore, in safe mode,entered the BIOS and chose for it to boot off of the CD Rw that I thought was the proper and shut the Hard Drive off. Here the CD RW was a slave and not the master. No luck in installing the OS. I bought a new 160 GHZ HD with the thought that I could load the OS, again no luck. I replaced the battery and tried again with no luck.
I have a computer running Windows XP PRO SP2 with 2, 250gb hard drives. The operating system and programs are on the C drive and the second drive which is removable is supposed to be for my data, but Windows doesn't recognize it so I can't use it. Right now I have my data on an external hard drive, connected by USB.
The second hard drive is new from my manufacturer (I have a custom computer and this is a replacement hard drive--the original was faulty) and I haven't put anything on it yet. When I first put it in my machine, I was able to see it in "My Computer". The next day when I was ready to start copying my data over, it was nowhere to be found. I turned off the machine, pulled out the drive and put it back and rebooted--still no show.
Well I have an hard drive into a external enclousure but the windows XP of a new CPU do not finish detect it when I connect it. But the same external hard drive work fine in my laptop. I formated my CPU 2 times, but i got the same error of Windows. My CPU has a new motherboard Foxconn M7VMX-K.
The USB ports work fine with my pendrive.
In my computer i can see a new hard drive with a letter (K, whithout data.
The Windows XP Administrator Disk doesn't show nothing about the external hard drive.
I've got this old mobo Abit VT7. I want to install XP on it. However, the XP disc doesn't recognize SATA hard drives. So I downloaded official SATA driver from the Abit website http://tinyurl.com/kua5qz and tries to slipstream my XP disc following the instructions set forth here http://tinyurl.com/37anvn . I am not too clear how to incorporate the drivers from the official drivers, but Nlite seems to be able to find the drivers once I pointed it to the top unzipped driver directory, and I selected the XP folder for it. However, the newly created XP disc still fails to recognize the SATA hard drives. Alternatively, I believe I could have a boot floppy which would load the drivers in, then I launch the setup in the XP installation CD via command line. But I don't know how to create a boot disc which has those SATA drivers in.
My operating system, Windows XP, comes up with several error messages when I try to open up system files or programs that concern the "Computer Administrator". I then checked in the Control Panel to make sure that my name is in fact the admininstrator, and it is, to no suprise. But whenever I try to open these programs it either says this has been disabled by the administrator. The administrator has turned off this feature.
I don't know why this happens. I find out a way to fix it and then when I close it, it won't let me reopen it without fixing it again. Some programs that I have tried that don't work and give me this or a similar error message are, System Restore, Task Manager, Regedit, and Windows Update.
I have a Windows XP home SP2 computer that has a Sony DVD RW DW-D22A that supposedly supports both -R and +R. Well I bought a stack of 100 Blank DVD-R and less than 1/2 way through the stack they turned into lousy DVD's. Both for DVD movies and data storage they wouldn't work. I would get this CRC check sum error message. I contacted the manufacturer and sent in a few samples and they replaced them - sent me two stacks of 50 - nice company. Well I just burned a data disc and my computer doesn't recognize anything being on the disc - I even get the "You have inserted a blank cd/dvd window" thing on my screen. I then tried to burn a dvd movie using a different program and that program doesn't even recognize a disc being in the drive (yes I did put in a fresh dvd before I started the program).
My brother went to My Computer one day and saw that there was no disc drive there, it was working in the past, but now it doesn't show up, I don't think he did anything unusual. But it shows up under Safely Remove Hardware Wizard with "Samsung CD Drive" or something like that.
I could use some guidance here~I had to run a system restore, due to Windows defender app failed to initialize I lost my audio, internet and that's what "Dell" said to do, and lost all my downloads and documents because my CD ROM wouldn transfer to my CD So now the drives are messed up with extra ones added.First my "D" drive is now "F" I have an extra Local disk "D" that when I click on it, it asks me if I want to format it? Extra disk "E" That when I click on it, it has nothing
What are all these extra drives doing on my computer? I don't recognize them. I'm certain I didn't plug any extra drives into my computer. And I also want to get rid of these drives so the Safely Remove Hardware icon won't appear anymore
my external hard drive all of a sudden stopped showing up in "my computer" and a can't find it anywhere else. it make the hardware sound when I plug it in but nothing shows up. when I plug it in another port it comes up with a message saying "USb device not recognized. one of the usb device attached to this computer has malfunction and windows cannot recognize it
I'm in the process of building a new computer to replace my old AMD 2800+ system. I would like to use one of my old hard drives that has all my files and programs on it without having to do a complete reformate and fresh install of winxp. Is this possible? and how do I go about doing this?
I have transferred a Hard Drive into another computer and thought I had to re-install Windows (XP Home) - this I did.In so doing I created another Folder - Windows2 so as not to overwrite anything. I have a Windows folder as well.I also still have a Windows98 Folder on this drive.I cannot access the latest e-mails in the new configuration - or anything else for that matter and know that I am going to have to reinstall all programs.How and where do I find those missing e-mails, or can I uninstall this new version and revert to the old one?
I was hit by a virus and now I can't access my hard drives from My Computer. I get a message "Windows Script Host" and "cannot find script file, "C:autorun.vbs" when I click on my "C" icon. Right clicking gives me gibberish in the menu box where the "Open" should be. I can still get through to the contents via My Documents and up-leveling.
I have an HP Pavillion zv5000.Windows xp sp2.I was online and the laptop and got a blue screen of death don't recall exactly what it said, something about ie encountering an error and needing to shut down.Went to reboot, and it tried to boot off of LAN.checked my BIOS everything seemed fine, disabled that boot option. Tried to reboot again, got a plashing flat cursor in upper left hand corner.Tried to use Norton Disk, scanned memory only.Did not scan boot.Tried to use XP disk to repair, and it came up with screen saying that it could not find any hard drives on this computer.What happened to me, is it viral, or hardware.This laptop is only a year old, but no longer under warranty.
I have a problem with one of the XP Versions on a hard drive. The problem started when my C: drive crashed. I replaced the drive and restored from the back-up I have. Since the new drive is larger than I care to use as a boot drive, the drive is partitioned.The restored back-up has is in the primary partition of the master drive. During the restore the OS stopped recognizing the optical drives(to complete the restore I used the second OS created in the second partition to copy the XP CD onto a partition of the hard drive I use for back-up. This drive is in a drive cradle). I have a CD reader/burner; a DVD reader in the tower; and a DVD burner in a USB2 drive cradle, none of these are recognized in the restored OS. In the process of trying to resolve this problem I installed a second version of XP in the second partition, this version recognizes all of the drives.
- Doesn't recognize the printer that's been installed for over a year
- Won't let me install another one
- System restore gives the error "System restore is not able to protect your computer. Please restart your computer, and then run System Restore again." and restarting does nothing.
I have an old Compaq Presario 5360 with Sis 7001 PCI to USB controller. This machine was working GOOD, I could work with my USB web cam, USB drive, USB digicam and others MP3 players.I have reinstalled my WinXP with Service Pack 2.0 and now I CAN'T use any USB device, when I connect my USB drive this device is not powered, XP doesn't notify me for anything. simply this PC looks not to have any USB controller.I have an DELL Notebook, I can use my USB devices on it.I just reinstalled the OS in the same way how I did it before. I think is something about drivers, the control panel (System devices) tells me everything is good and my USB controllers are working correctly.
everytime i plug in a usb/external hardrive, it isnt recognized in my computer, its not too do with any hardware, im 100% its a software issue, and i was running a program and it seemed to do something nothing comes up in my computer but you hear the connected sound, ive tried assignign a manual drive letter but it comes up with an error. and seeing as i cant back anything up because nothings regonized
How do I install 2 hard drives from seperate computers into 1 computer? I have tried the plug and play routine without success. Both hard drives have the XP OS on them and they work in their respective chassis. I know that one will have to be the master and the other the slave but I am not sure how to set everything up. Additionally, their are many programs and drivers on the prospective slave that need to be accessible.
I just tried to reformat and install windows XP home edition, and upon coming to the screen of "Repair" or "Install fresh copy" I received an error reporting:Setup did not find any hard disk drives installed in your computer.Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program.Setup cannot continue. To quit setup, press F3.I was trying to use ubuntu but my ram wasn't high enough, so now it won't let me run windows xp again.
I don't really understand it.I initially used G-parted to partition my 250gb drive into a 100, 75, and 55.Then I tried installing Windows XP SP3 and it says it doesn't recognize them, so I deleted those partitions and made new ones (the same size though) and it asked me to reboot. After I rebooted it prompted me again with Press Enter to install Windows, so I do and it says some crap about how it doesn't recognize any hard drive plugged in.BIOS recognizes the drive and its size.
I just replaced my old DVD ROM with a new DVD-RW drive. The system writes to the new drive fine (I have burned a couple of Video DVDs) but when I boot the system the Bios says it doesn't see the D: (CD) or E: (DVD) drive. Once I am into Windows XP I can also play CDs from the CR-RW drive but I can't use it to copy new software onto the system.
I have a multi-boot system set up and it Includes 3 OS's, Windows 7, XP, and a flavor of Linux. My XP installation does not recognize hardly any of the drivers for the hardware on my HP pavilion dv2941se laptop. Beings it doesn't have the driver for my network card i cant get online to search for other drivers.
Just upgraded a old pc running win 98 to xp.Before I reformatted and installed the new os I made a backup of my 98 os and files using ms backup on a DVD. The file was about 3 gb and was verified by the backup program. It has the file extension .qic.The XP ms backup doesn't recognize the .qic format.Anyone know if I can install the 98 backup on XP or a freeware backup program to read my file?
I have a major problem with my Packard Bell iMedia D815AW home desktop. Ever since I installed a Lite-On DVD-RW into it, it started making a lot of noise (a bit like the sound of a typewriter tapping) and started crashing. I removed the DVD-RW drive, only for the problem to continue. The computer kept crashing (often showing the blue crash screen, other times showing a black 'insert floppy disk' screen, sometimes just restarting itself). Running the Windows disk check utility at start-up would not work - the computer would freeze while the disk scan occured (I tried many times). I ran disk registery programs (ie- Registry Mechanic, etc), anti-virus software, defragmentation, etc. etc. but the problem remained. Yesterday, I decided I would try reinstalling (or restoring?) Windows XP again (with the intention of fixing the problem without deleting my personal files on the computer). However, upon instertion of the disk, Windows XP claimed it could not reinstall, as the Windows version on my computer was too recent. I assumed that the reason for this was that I had installed Windows XP Serice Pack 2 and so the version was too recent for the installation disk. So, I thought I would uninstall service pack 2 and then try to reinstall Windows XP. However, while uninstalling service pack 2, the computer crashed. Since then, whenever I try to startup Windows, the computer restarts after about 30 seconds of loading. I can enter the startup screen which gives you access to entering through Safe Mode, Debugging, etc - however entering through these modes has the same problem though with the computer restarting before reaching Windows. So, I entered the computer BIOS at startup and changed it to load via CD, inserting the Windows XP disk. I tried to use the 'Recovery Console' option, however the error message "Setup did not find any hard disk drives installed in your computer" showed. It then asked me to restart the computer by hitting F3. I then tried to use the Windows install option by restarting the computer and loading the Windows XP disk, but the same "Setup did not find any hard disk drives installed in your computer" message showed. So, i cant load the computer, nor reinstall the software. I dont want to lose all the files on my computer.
computer failed to reboot. I used a boot disk to get started. I then noticed that the system does not recognize the drives C (where my Windows XP OS is installed) or D drive which is a seperate physical drive for my data.
