SATA Drivers Needed To Use Repair
Oct 27, 2008I have an Fujitsu Amilo M1437G and have lost the Repair disks - it has XP Home Two Choices - buy a new set Obtain the SATA drivers and slipstream them onto a cd with XP Home.
View 5 RepliesI have an Fujitsu Amilo M1437G and have lost the Repair disks - it has XP Home Two Choices - buy a new set Obtain the SATA drivers and slipstream them onto a cd with XP Home.
View 5 RepliesI'm using an HP Pavilion notebook with XP Home that's about three months old, and have been having some problems with it here and there for maybe two/three weeks. Programs were crashing, not opening, some audio problems, etc. I used Advanced System Optimizer & TuneUp Utilities '06 to clean the registry and things were actually ok for a while.A few days ago, however, Bon Echo started crashing a bit and I had more problems with other programs. Then, after starting up the PC, XP would get to the screen just before showing the account logons and it would suddenly restart, then just loop that process.
View 13 Replies View RelatedFirst time poster; having an issue with a Windows XP repair installation. More specifically, during the repair installation process I am presented with this error message:"Files Needed The file 'asms' on Windows XP Professional Service Pack 2 CD is needed. Type the path where the file is located, and then click OK. Copy files from: D: . . . " Note that the Windows XP DVD includes Service Pack 2. Also note that when the error message presents, the CD-ROM essentially goes dead.
View 2 Replies View RelatedI was having problems with my computer and a BSOD that pointed to my hd. I decided to reinstall XP but then decided to try a repair first. The repair seems to work to an extent as pc starts fine now and seems to load normally etc. However upon starting I noticed the desktop had reverted back to default, my programs weren't listed in the start menu and favorites were gone. I was guessing that it wiped my hd like I had done a re-install. So I went to copy some of my backed up files but when I went into My Computer I see that all my files are still there under C:Documents&SettingsOwner like before. But also under Documents & Settings are these folders now.
View 3 Replies View RelatedI recently had some problems with some viruses and stuff and my system was still a bit "off" even after I removed them. Luckily I have Acronis True image and was able to revert back to a nice state of operation. As nice and clean as my system is right now I find that not everything is still not hunky. Some fonts stay the wrong sizes and other cosmetic things, so I have decided I should also run the Windows XP repair option again just to make everything right. My question is..What can I expect after I run it? Will all of my applications stilll function etc?
View 1 Replies View RelatedI run a home network of several pc,s(6) of various makes/models plus i like to mess around with my mates pc,s(ouch) and im hoping someone(or more) can/will recommend a good program for identifying, downloading and installing the nessary and updated drivers needed to keep/get my pc,s running well, preferebly a free program but all suggestions will be considered and appreciated, and i forgot to mention that they all run on xp sp2. Thanks for taking the time to read this article.
View 3 Replies View Relatedmy ladys computer has no sound. In the device manager it just has a big yellow "?" for multimedia, so I will assume the drivers have not been installed. After doing some reading on this forum I downloaded EVEREST Home Addition. In Everest -> Multimedia-> Windows Audio is empty. In Everest->Multimedia->PCI/PnP Audio I have SIS 7012 Audio Device.Where from here?As a simple kinda guy I would appreciate full instructions.
View 3 Replies View RelatedI have just re-installed windows on my fujitsu amilo l6825 but dont have the driver disc, i am missing 3 drivers, if anyone can try and help me aquire them that would be great. Multimedia audio controller PCI modem Video controller (VGA Compatable).
View 2 Replies View Relatedwhat drivers do you need to install after reinstalling
View 3 Replies View RelatedA computer game she loaded it played it for awhile saved it closed it now it won't reload it shows the start up video and loads the features then goes back to the desk top no error message is shown it just shuts down i went to check my disk space and under drive c: it shows 5.69 gb used 3.71 gb available under drive d: it shows a color scheme for used and available disk space and according to that it's full So my question is do i need to buy more disk space, a new disk driver, an additional driver or how can i free up the disk space under drive d: i have already gotten rid of everything i can ran the disk clean up defragmented even went into hidden files and got rid of things in there nothing worked please help me.
View 3 Replies View RelatedI'm trying to install XP on a new Fujitsu SATA hard drive (39T2785 R) in a Lenovo laptop (supplied with Vista on the original drive) and no diskette drive. The problem is that the only thing I can find for drivers is ONTRACK's Disk Manager...which creates a bootable floppy disk. I suspect the drivers are included in the .BIN file on the diskette, but I can't get to them.
View 9 Replies View RelatedI have an IBM Lenovo T61, with preinstalled Vista, I want to make an xp cd with the SATA drivers on, because it cant detect the hdd.I have been searching for a while, and some links tell me that I have to copy alot of files to a standalone folder, and edit txtsetup.sif and winnt.sif? is that right? I have a driver with a iastor.sys, but im wondering if thats the right driver.Yesterday, I made a boot cd, and it continued so I could format the hdd,( So I hoped it worked) But under the installation, it stop, because it couldnt find the driver.. include iastor.I have nlite, but dont know how it works.. Can someone plz tell me from the beginning of makeing a boot XP cd with my SATA drivers.
View 4 Replies View RelatedI have a custom made PC, with XP Home OEM. Since I lost the CD, I borrowed a friend's, but used my own product key. This seemed to be okay, untill it said something about having no hard disk/drive.I looked this up on the internet and people have mentioned SATA drivers. I think this is related to the motherboard? So will everything be okay if I get the SATA drivers for my motherboard? How do I find these? I looked on the Asus site, and it seemed too confusing.Incase you need to know, I have an Asus P5RD1-V
View 4 Replies View RelatedI need to repair my xp on my Sony VAIO VGN-AR11S and need to find HDD drivers to load while XP is loading using F6, I already tried Intel's divers and it not working
View 1 Replies View RelatedI'm trying to set up a dual-boot with Ubuntu and XP64. Initially I just had Ubuntu on my one sata hdd and XP on an ide hdd. I decided it'd be better running XP on the sata drive too, so I resized my linux partition with gparter, and created a new NTFS partition.The problem is, when I try to install XP onto the drive, it cannot seem to see the sata drive. Nothing was listed at all except the ide drives and my usb drive.I did some looking and found the 64 bit sata drivers for my motherboard, managed to load them onto a floppy and load them into the XP setup. This was all fine again until the time to select a partition, where it seemed to list the drive, but only shows 'Unknown disk' 'There is no disk in the drive'.I tried deleting the partition I made with gparter to see if XP could at least see the 'unallocated space' but to no avail.I even tried making a boot disk in nLite with the sata drivers, but it made no difference (not really surprisingly).If I try to use the 32 bit drivers that came with my mobo, it won't let me install XP.I'm all out of ideas to why it won't work.
View 4 Replies View RelatedI have a Gigabyte GA-EP35-DS3R mobo. I don't need RAID but would like to use SATA AHCI mode (option in BIOS) which would allow actual SATA drivers instead of the IDE emulation (mode). All my hard drives and optical drives are SATA.I have found via google many old articles and instructions how to slipstream XP and SP2 but I have a newer XP SP2 CD. I just need to 'add' the SATA drivers that I can download from the Gigabyte driver downloads site.Does anyone know how to do this (i.e. slipstream XP SP2 w/ ICH9R SATA drivers?)?I read about using nLite and other programs/methods but I would like something simple that doesn't need floppies.
View 1 Replies View Relatedhow to mix sata drivers for windows xp
View 3 Replies View RelatedI have a seagate 160gb sata hdd partitioned to 40 and 120 gb. With Windows xp Home sp2 on the 40gb. If i format the 40gb hdd will i have to reinstall the sata drivers
View 4 Replies View RelatedWill this motherboard: Asus m4a78 pro, need me to install extra sata drivers for winxp to support it? If so, where would i find them?
View 2 Replies View RelatedMy computer came preinstalled with a whole bunch of HP garbage I didn't want.. So I bought a copy of WINxp pro and tried to install.. Upon doing this It couldn't read my hard drive, which I later determined was due to the fact it is a SATA hard drive and the XP install cd doesnt have the drivers for it. Solution was, I changed a setting in my computer's BIOS to change the raid mode to IDE instead of SATA, then the install proccess went fine. Problem is now I have to keep it at IDE, and if I turn it back to SATA the computer retstarts after the Starting Windows screen with the Windows icon, I assume this is due to the fact that Windows didn't bother installing any SATA drivers since I installed in IDE mode... Could somone please point me in the right direction as to what I need to install/configure to allow WIN to boot up with my BIOS using SATA mode?
View 5 Replies View RelatedI wasn't sure where this thread should be placed. I want to install XP and it wouldn't detect my hard drive. Since I have no floppy drive I want to slipstream a xp cd with the drivers already there. I am using the program nLite to make the bootable disc. However the problem is that I can't find the drivers or i'm unsure what is correct. My controllers are... Intel(R) 82801HEM/HBM SATA AHCI Controller Intel(R) ICH8M Ultra ATA Storage Controllers 2850.. But chipset is Mobile Intel(R) 965 Express Chipset Family.
View 7 Replies View Relatedneed floppy disks that already have the sata drivers loaded
View 1 Replies View RelatedI want to replace Vista with XP however my laptop has a SATA HD. I know that I can create a boot disk on either a floppy or a CD however I think it should be possible for me to install the drivers on an external USB HD? Before I format my drive I just wanted to confirm that this is possible?
View 6 Replies View Relatedinstalling xp on a sata drive as windows xp wont see the drive i know i need the sata drivers but cant find the rights ones for my board its gigabyte g31m-es2l chipset g31 express
View 6 Replies View Relatedwhen i first installed windows and what not i had a floppy drive installed.i need to do a windows repair and to do so i need to install these external sata drivers for my hard drives.i do not have access to a floppy drive and i would like to know if there was anyway to get around using the floppy drive to install these drivers one question i had was would i be able to change the drive letter of one of my dvd drives to A so that windows will install from there instead of an obsolete floppy drive A.
View 9 Replies View Relatedi have a p5s800-vm mother board of asus and the setup of windows xp (pro-sp2) dont find my hard disc and i need to make a floopy from the drivers on the disc to help it found the hard disc. that what i do to make that floopy (as some nice guys here tell me to) i go to the drivers folder on the disc of the motherbord than chose "raid" folder in it i chose the floopyimage folder there i have 3 folders
1.964plus180(181)
2.964_180
3.965_965L
the guys here tell me to put the files of the 965_965L on the floopy without the foler imself. so in the 965_965L folder i have two files "SISRAID and "TXTSETUP.OEM" and aonter folder calld "raid" and in it i have to folders "winxp" and "win2000" and each folder has its own file. so what i do was to put only the "TXTSETUP.OEM" file on the floopy without noting else cause someone here tell me it all i need to do......
I have a Gateway ML6720 notebook that came with Vista (processor: Intel Dual-Core Mobile Processor T2310 1.46 GHz and memory: 1024 MB 667 MHz DDR2 SDRAM (2 512) Operates at 533 MHz). This laptop does not come with a floppy nor do I have a usb floppy! I would like to "UPGRADE" to win XP Home but the hard drive isn't seen because it's missing the xp sata drivers. I already went to gateways driver site and downloaded the 32bit sata/ mass storage controller, the chipset wich supports XP and the Sigma Tel Audio Driver. I am going to use "nlite" to slipstream the drivers into the XP install disk but have a few questions because I have never done this. First, do I need to insert all drivers into the xp install or just the sata/ mass controller? And If anyone has ever done this could I get you to walk me through it?
View 11 Replies View RelatedI was wondering if it makes any sense to buy and install a SATA 300 controller to work with two WD SATA 300 drives. I kind of doubt I will achieve 300mb buffer to host transfers with only SATA 150 motherboard.
View 6 Replies View RelatedHow do I uninstall all drivers associated with my (windows xp) touch pad. Touch Pad is not working / bad drivers installed drivers over bad drivers.
View 1 Replies View RelatedI have just installed some anti virus software and during installation I got messages saying my registry had been damaged and i should log onto such-and-such site to download repair software and run it on my system. I am suspicious that if I do this I am exposing myself to total destruction. One of the messages has just popped up again and the site it directs me to is FixReg32.com.
View 2 Replies View RelatedProblems started was when i updated my Zone Alarm firewall, windows works absolutely fine no problems what so ever, then next time i reboot it does the same, this time problems are non-stop until about 10% then fine from there on in, then when it finishes repairing the drive it gets stuck at repairing unreadable security descriptions date stream.
It also said whilst recovering orphaned files insufficient disk space to recover lost files. It stopped for a while then carried on. After scan disk it restarted and wouldn't load windows, just got stuck on windows loading screen forever, eventually 15+ minutes i pressed reset as there was no disk activity.