SATA HDD Drivers For Installing
Oct 2, 2008I need to repair my xp on my Sony VAIO VGN-AR11S and need to find HDD drivers to load while XP is loading using F6, I already tried Intel's divers and it not working
View 1 Replies
ADVERTISEMENT
Sata Drivers While Installing 64
Oct 24, 2008I'm trying to set up a dual-boot with Ubuntu and XP64. Initially I just had Ubuntu on my one sata hdd and XP on an ide hdd. I decided it'd be better running XP on the sata drive too, so I resized my linux partition with gparter, and created a new NTFS partition.The problem is, when I try to install XP onto the drive, it cannot seem to see the sata drive. Nothing was listed at all except the ide drives and my usb drive.I did some looking and found the 64 bit sata drivers for my motherboard, managed to load them onto a floppy and load them into the XP setup. This was all fine again until the time to select a partition, where it seemed to list the drive, but only shows 'Unknown disk' 'There is no disk in the drive'.I tried deleting the partition I made with gparter to see if XP could at least see the 'unallocated space' but to no avail.I even tried making a boot disk in nLite with the sata drivers, but it made no difference (not really surprisingly).If I try to use the 32 bit drivers that came with my mobo, it won't let me install XP.I'm all out of ideas to why it won't work.
View 4 Replies View RelatedInstalling SATA Raid Drivers?
Dec 3, 2006My computer came preinstalled with a whole bunch of HP garbage I didn't want.. So I bought a copy of WINxp pro and tried to install.. Upon doing this It couldn't read my hard drive, which I later determined was due to the fact it is a SATA hard drive and the XP install cd doesnt have the drivers for it. Solution was, I changed a setting in my computer's BIOS to change the raid mode to IDE instead of SATA, then the install proccess went fine. Problem is now I have to keep it at IDE, and if I turn it back to SATA the computer retstarts after the Starting Windows screen with the Windows icon, I assume this is due to the fact that Windows didn't bother installing any SATA drivers since I installed in IDE mode... Could somone please point me in the right direction as to what I need to install/configure to allow WIN to boot up with my BIOS using SATA mode?
View 5 Replies View RelatedInstalling Sata Drivers - Wont See The Drive
Jun 20, 2010installing xp on a sata drive as windows xp wont see the drive i know i need the sata drivers but cant find the rights ones for my board its gigabyte g31m-es2l chipset g31 express
View 6 Replies View RelatedFujitsu SATA Drivers
Jul 11, 2007I'm trying to install XP on a new Fujitsu SATA hard drive (39T2785 R) in a Lenovo laptop (supplied with Vista on the original drive) and no diskette drive. The problem is that the only thing I can find for drivers is ONTRACK's Disk Manager...which creates a bootable floppy disk. I suspect the drivers are included in the .BIN file on the diskette, but I can't get to them.
View 9 Replies View RelatedSlipstreaming With SATA Drivers
Sep 6, 2007I have an IBM Lenovo T61, with preinstalled Vista, I want to make an xp cd with the SATA drivers on, because it cant detect the hdd.I have been searching for a while, and some links tell me that I have to copy alot of files to a standalone folder, and edit txtsetup.sif and winnt.sif? is that right? I have a driver with a iastor.sys, but im wondering if thats the right driver.Yesterday, I made a boot cd, and it continued so I could format the hdd,( So I hoped it worked) But under the installation, it stop, because it couldnt find the driver.. include iastor.I have nlite, but dont know how it works.. Can someone plz tell me from the beginning of makeing a boot XP cd with my SATA drivers.
View 4 Replies View RelatedSATA Drivers For Reinstalling
Sep 5, 2007I have a custom made PC, with XP Home OEM. Since I lost the CD, I borrowed a friend's, but used my own product key. This seemed to be okay, untill it said something about having no hard disk/drive.I looked this up on the internet and people have mentioned SATA drivers. I think this is related to the motherboard? So will everything be okay if I get the SATA drivers for my motherboard? How do I find these? I looked on the Asus site, and it seemed too confusing.Incase you need to know, I have an Asus P5RD1-V
View 4 Replies View RelatedSP2 With ICHR9 SATA Drivers
Jul 15, 2008I have a Gigabyte GA-EP35-DS3R mobo. I don't need RAID but would like to use SATA AHCI mode (option in BIOS) which would allow actual SATA drivers instead of the IDE emulation (mode). All my hard drives and optical drives are SATA.I have found via google many old articles and instructions how to slipstream XP and SP2 but I have a newer XP SP2 CD. I just need to 'add' the SATA drivers that I can download from the Gigabyte driver downloads site.Does anyone know how to do this (i.e. slipstream XP SP2 w/ ICH9R SATA drivers?)?I read about using nLite and other programs/methods but I would like something simple that doesn't need floppies.
View 1 Replies View RelatedHow To Mix Sata Drivers For Windows Xp
Jan 11, 2010how to mix sata drivers for windows xp
View 3 Replies View RelatedInstalling Drivers For Graphics And Wireless Network Card Drivers
Jan 1, 2006Whenever i install drivers on my pc, (i've tried graphics card drivers and wireless network card drivers) my pc stops working. When i installed the graphics card drivers, i tried testing the graphics on a game (counter-strike) but as soon as i got into the game, the pc flashes a blue screen, and reboots. I cant see what the blue screen says because it flashes on and off again to quick for me to read it. I decided to uninstall the graphics card drivers, and the game worked perfectly, but the graphics were REALLY bad. So i thought i might need to update some other drivers, so i tried to install my wireless network card, but when i finished installing the drivers when i had to restart my computer, it flashed the BSOD.... AGAIN! I need help urgently as im going to a LAN gaming comp called "rezidue" and its on in 2 weeks, i need my pc fixed by then! All these problems started when i upgraded my CPU. Everything was running smooth, and i was happily playing along on my computer, when i was asked what my FPS was in counter-strike, and i was all "mine are 65!" and there like "wow that sucks, mines 130" so i set out on my epic quest to get better FPS then everyone else and MAN THAT WAS A MISTAKE. I upgraded from my celeron 2.8ghz cpu to a P4 3.0ghz HT cpu, and thats when things started messing up on me. My entire system is as follows (incase it can help someone help me) P4 3.0ghz HT CPU, Microstar P4 motherboard, 128mb Nvidia Geforce mx4000 AGP x8 graphics card, 256MB ddr ram (recently brought new 1GB ddr ram off ebay just for rezidue! should be here soon!) TP-LINK 54mbps wireless network card) And last but not least
View 13 Replies View RelatedFormatting - Have To Reinstall The Sata Drivers
Aug 3, 2005I have a seagate 160gb sata hdd partitioned to 40 and 120 gb. With Windows xp Home sp2 on the 40gb. If i format the 40gb hdd will i have to reinstall the sata drivers
View 4 Replies View RelatedSATA Drivers Needed To Use Repair
Oct 27, 2008I have an Fujitsu Amilo M1437G and have lost the Repair disks - it has XP Home Two Choices - buy a new set Obtain the SATA drivers and slipstream them onto a cd with XP Home.
View 5 Replies View RelatedNeed To Install Extra Sata Drivers
Mar 21, 2009Will this motherboard: Asus m4a78 pro, need me to install extra sata drivers for winxp to support it? If so, where would i find them?
View 2 Replies View RelatedSata Drivers For Hard Drive?
Aug 18, 2007I wasn't sure where this thread should be placed. I want to install XP and it wouldn't detect my hard drive. Since I have no floppy drive I want to slipstream a xp cd with the drivers already there. I am using the program nLite to make the bootable disc. However the problem is that I can't find the drivers or i'm unsure what is correct. My controllers are... Intel(R) 82801HEM/HBM SATA AHCI Controller Intel(R) ICH8M Ultra ATA Storage Controllers 2850.. But chipset is Mobile Intel(R) 965 Express Chipset Family.
View 7 Replies View RelatedPreloaded Sata Floppy Drivers
Aug 28, 2009need floppy disks that already have the sata drivers loaded
View 1 Replies View RelatedInstall Over Vista With SATA - Drivers On External USB HD?
Mar 9, 2008I want to replace Vista with XP however my laptop has a SATA HD. I know that I can create a boot disk on either a floppy or a CD however I think it should be possible for me to install the drivers on an external USB HD? Before I format my drive I just wanted to confirm that this is possible?
View 6 Replies View RelatedCan I Install Sata Drivers Without A Floppy Drive?
Jul 11, 2005when i first installed windows and what not i had a floppy drive installed.i need to do a windows repair and to do so i need to install these external sata drivers for my hard drives.i do not have access to a floppy drive and i would like to know if there was anyway to get around using the floppy drive to install these drivers one question i had was would i be able to change the drive letter of one of my dvd drives to A so that windows will install from there instead of an obsolete floppy drive A.
View 9 Replies View RelatedSata Hard Disc - Make Floppy From The Drivers
Mar 17, 2007i have a p5s800-vm mother board of asus and the setup of windows xp (pro-sp2) dont find my hard disc and i need to make a floopy from the drivers on the disc to help it found the hard disc. that what i do to make that floopy (as some nice guys here tell me to) i go to the drivers folder on the disc of the motherbord than chose "raid" folder in it i chose the floopyimage folder there i have 3 folders
1.964plus180(181)
2.964_180
3.965_965L
the guys here tell me to put the files of the 965_965L on the floopy without the foler imself. so in the 965_965L folder i have two files "SISRAID and "TXTSETUP.OEM" and aonter folder calld "raid" and in it i have to folders "winxp" and "win2000" and each folder has its own file. so what i do was to put only the "TXTSETUP.OEM" file on the floopy without noting else cause someone here tell me it all i need to do......
Installing Pro With SATA Drives
Sep 4, 2007I am trying to install windows XP Pro on a Dell Dimension 9200 with SATA drives. I have tried the F6 but I don't have a floppy drive, is there a way to use a USB thumb drive, to provide the SATA driver?
View 3 Replies View RelatedClean Installing Pro SP2 On SATA Drives
Feb 25, 2006It's looking like I have to re-install C+XP Pro SP2. I have never installed XP Pro SP2 before myself on SATA drives - I know that you used to have to get the hard disc drivers from somewhere first so you could use them in the set up process. I've never done this either! Is this still an issue with XP SP2 (I have a full install Windows XP Pro SP2 CD). If so, could someone outline the details for me or point me in the right direction web wise.
View 3 Replies View RelatedInstalling SATA - Boot Serial Drive
Dec 19, 2004I'm trying to install Windows XP on my new Serial ATA hard drive, it has been formatted everything seems ok, When I start installing windows XP pro on this machine it seems like it just can't detect the damn hard drive, when I set it as boot on te serial ata drive eeverything works fine, it goes as C:/ but I just can't switch to my cd drive with windows XP to install it.When I boot up my other hrd drive with windows xp, I can actually see my hard drive in windows explorer.
View 3 Replies View RelatedInstalling On SATA Drive In Dell M1330
Aug 19, 2007I've read all the reports and "in theory" I know what I need to do. However, I haven't been able to pull it off yet. Here goes:
I hate Vista. I'm installing XP.
I have a SATA drive. I don't have a floppy drive.
I believe I can do it in the BIOS.
I've changed the HD setting in the BIOS from SATA to ATA (my only choice). XP installs fine. But now I need to change it back to SATA. I do that, restart and I get the blue screen with an automatic restart. I'm sure I need to add the SATA drivers somewhere, but I'm not sure where or how.
Installing On Gateway Laptop SATA HD With No Floppy Drive
Apr 11, 2008I've looked around and I'm having a hard time finding good info on this. I've looked up stuff like slipstreaming SATA drivers into the windows disc, but I don't think I'm doing it right. I got the correct SATA drivers from gateways website. I'm pretty sure this system just uses the intel SATA Chipset. Any way if anyone could help me install XP on my Gateway C-141XL laptop without having a floppy disc I'd really appreciate it.
View 2 Replies View RelatedNo Internet After Re-installing And Installing Drivers?
Mar 6, 2010I re-formated my sisters computer yesterday, and after installing it i had no internet. As i hadn't installed any drivers yet, i understood that. But after heading over to dell's site, downloading all of the drivers for her computer and then installing them, i STILL do not have any internet. I don't see any connections on the computer either, it's just blank!
View 4 Replies View RelatedWould Like To "UPGRADE" - Missing The Sata Drivers
Jun 7, 2010I have a Gateway ML6720 notebook that came with Vista (processor: Intel Dual-Core Mobile Processor T2310 1.46 GHz and memory: 1024 MB 667 MHz DDR2 SDRAM (2 512) Operates at 533 MHz). This laptop does not come with a floppy nor do I have a usb floppy! I would like to "UPGRADE" to win XP Home but the hard drive isn't seen because it's missing the xp sata drivers. I already went to gateways driver site and downloaded the 32bit sata/ mass storage controller, the chipset wich supports XP and the Sigma Tel Audio Driver. I am going to use "nlite" to slipstream the drivers into the XP install disk but have a few questions because I have never done this. First, do I need to insert all drivers into the xp install or just the sata/ mass controller? And If anyone has ever done this could I get you to walk me through it?
View 11 Replies View RelatedPromise SATA 300 (SATA IO) PCI Controller On SATA 150
Aug 2, 2005I was wondering if it makes any sense to buy and install a SATA 300 controller to work with two WD SATA 300 drives. I kind of doubt I will achieve 300mb buffer to host transfers with only SATA 150 motherboard.
View 6 Replies View RelatedInstalling Drivers With UBUNTU
Apr 29, 2006My computer recently crashed, and I am going to put ubuntu as my operating system rather than windows. When I got my computer, I had to reinstall the driver for the wireless card. Will I have to do that? If so how, and where do I find the driver? I have a driver recovery cd that came with my computer, however I don't know if that will work with anything besides windows.
View 1 Replies View RelatedInstalling Drivers After Reinstall Of OS
Sep 14, 2007the computer is a Toshiba Equium A series A100 (psAA4E) ive reinstalled it with my XP disc and his XP serial number as he has lost the OS disc, all has gone in execpt, modem device on high definition audio bus, sm bus controller, Video controller (VGA compatible).
View 7 Replies View Related'Downgrade' Drivers Not Installing
Mar 31, 2008I posted here in February '08 about a downgrade from Vista Home Basic to XP Home, and received good information on finding the necessary drivers at the Acer website.
I got XP on the Acer up and running, Internet access, etc. all appeared fine. I am now adding speakers and unable to get sound. I viewed Device Manager and found to my surprise that I've got question marks next to Display Adapter >Video Controller and Other Devices > PCI Device. Interestingly, Sound, Video and Game Controllers appears normal in Device Manager, but no sound card appears in the list (interesting since it is lack of sound that prompted me to check in the first place
No Winxp Home Cd-rom! But Need For Installing Drivers
May 30, 2006I'm trying to get a new usb mouse to work on it, and I have the drivers for it - but when installing the 'new hardware', it reaches a point wherein it asks to insert the "Windows XP Home Edition CD-ROM", but I don't have one! It won't allow me to skip this, and if I click cancel, the mouse isn't installed, and an error window appears saying that an error occured during the new hardware's installation.
View 3 Replies View RelatedNot Auto Installing Drivers - USB Devices
Apr 18, 2010my friend give me his Gateway 610XL all in one PC to fix a few problems. one of them was internet explorer not showing up when called for, that was an easy fix; however, this next problem has to do with USB devices and it's giving me a bit of trouble. basically, any USB devices i connect to it, windows doesn't auto install or even try to auto install the drivers. no matter what i connect to it (mouse, keyboard, thumb drive). i can go into device manager and install the drivers manually just fine but i would like to fix the auto install feature for my friend cuz he's not that good with computers. i checked and made sure the following services are enabled:
plug and play
upnp
user mode driver framework
shell hardware detection
the problem persist even in safe mode. one thing i noticed is when i go to control panel and then hit add hardware, i get a message that says this: "you can only install one device at a time. when the other device installation is complete, try this wizard again" (some where along those lines). i get that message even with nothing connected to the USB ports. i'm guessing what ever this "other device" is, it hanging up pnp so how do i go about aborting that installation? i don't really see anything in the task bar that even suggest a driver installation is on the way. this is running Windows XP Media Center Edition SP3 by that way.