I'm trying to install XP on a new Fujitsu SATA hard drive (39T2785 R) in a Lenovo laptop (supplied with Vista on the original drive) and no diskette drive. The problem is that the only thing I can find for drivers is ONTRACK's Disk Manager...which creates a bootable floppy disk. I suspect the drivers are included in the .BIN file on the diskette, but I can't get to them.
View 9 Replies
I have an IBM Lenovo T61, with preinstalled Vista, I want to make an xp cd with the SATA drivers on, because it cant detect the hdd.I have been searching for a while, and some links tell me that I have to copy alot of files to a standalone folder, and edit txtsetup.sif and winnt.sif? is that right? I have a driver with a iastor.sys, but im wondering if thats the right driver.Yesterday, I made a boot cd, and it continued so I could format the hdd,( So I hoped it worked) But under the installation, it stop, because it couldnt find the driver.. include iastor.I have nlite, but dont know how it works.. Can someone plz tell me from the beginning of makeing a boot XP cd with my SATA drivers.
View 4 Replies View RelatedI have a custom made PC, with XP Home OEM. Since I lost the CD, I borrowed a friend's, but used my own product key. This seemed to be okay, untill it said something about having no hard disk/drive.I looked this up on the internet and people have mentioned SATA drivers. I think this is related to the motherboard? So will everything be okay if I get the SATA drivers for my motherboard? How do I find these? I looked on the Asus site, and it seemed too confusing.Incase you need to know, I have an Asus P5RD1-V
View 4 Replies View RelatedI need to repair my xp on my Sony VAIO VGN-AR11S and need to find HDD drivers to load while XP is loading using F6, I already tried Intel's divers and it not working
View 1 Replies View RelatedI'm trying to set up a dual-boot with Ubuntu and XP64. Initially I just had Ubuntu on my one sata hdd and XP on an ide hdd. I decided it'd be better running XP on the sata drive too, so I resized my linux partition with gparter, and created a new NTFS partition.The problem is, when I try to install XP onto the drive, it cannot seem to see the sata drive. Nothing was listed at all except the ide drives and my usb drive.I did some looking and found the 64 bit sata drivers for my motherboard, managed to load them onto a floppy and load them into the XP setup. This was all fine again until the time to select a partition, where it seemed to list the drive, but only shows 'Unknown disk' 'There is no disk in the drive'.I tried deleting the partition I made with gparter to see if XP could at least see the 'unallocated space' but to no avail.I even tried making a boot disk in nLite with the sata drivers, but it made no difference (not really surprisingly).If I try to use the 32 bit drivers that came with my mobo, it won't let me install XP.I'm all out of ideas to why it won't work.
View 4 Replies View RelatedI have a Gigabyte GA-EP35-DS3R mobo. I don't need RAID but would like to use SATA AHCI mode (option in BIOS) which would allow actual SATA drivers instead of the IDE emulation (mode). All my hard drives and optical drives are SATA.I have found via google many old articles and instructions how to slipstream XP and SP2 but I have a newer XP SP2 CD. I just need to 'add' the SATA drivers that I can download from the Gigabyte driver downloads site.Does anyone know how to do this (i.e. slipstream XP SP2 w/ ICH9R SATA drivers?)?I read about using nLite and other programs/methods but I would like something simple that doesn't need floppies.
View 1 Replies View Relatedhow to mix sata drivers for windows xp
View 3 Replies View RelatedI have a seagate 160gb sata hdd partitioned to 40 and 120 gb. With Windows xp Home sp2 on the 40gb. If i format the 40gb hdd will i have to reinstall the sata drivers
View 4 Replies View RelatedI have an Fujitsu Amilo M1437G and have lost the Repair disks - it has XP Home Two Choices - buy a new set Obtain the SATA drivers and slipstream them onto a cd with XP Home.
View 5 Replies View RelatedWill this motherboard: Asus m4a78 pro, need me to install extra sata drivers for winxp to support it? If so, where would i find them?
View 2 Replies View RelatedMy computer came preinstalled with a whole bunch of HP garbage I didn't want.. So I bought a copy of WINxp pro and tried to install.. Upon doing this It couldn't read my hard drive, which I later determined was due to the fact it is a SATA hard drive and the XP install cd doesnt have the drivers for it. Solution was, I changed a setting in my computer's BIOS to change the raid mode to IDE instead of SATA, then the install proccess went fine. Problem is now I have to keep it at IDE, and if I turn it back to SATA the computer retstarts after the Starting Windows screen with the Windows icon, I assume this is due to the fact that Windows didn't bother installing any SATA drivers since I installed in IDE mode... Could somone please point me in the right direction as to what I need to install/configure to allow WIN to boot up with my BIOS using SATA mode?
View 5 Replies View RelatedI wasn't sure where this thread should be placed. I want to install XP and it wouldn't detect my hard drive. Since I have no floppy drive I want to slipstream a xp cd with the drivers already there. I am using the program nLite to make the bootable disc. However the problem is that I can't find the drivers or i'm unsure what is correct. My controllers are... Intel(R) 82801HEM/HBM SATA AHCI Controller Intel(R) ICH8M Ultra ATA Storage Controllers 2850.. But chipset is Mobile Intel(R) 965 Express Chipset Family.
View 7 Replies View Relatedneed floppy disks that already have the sata drivers loaded
View 1 Replies View RelatedI want to replace Vista with XP however my laptop has a SATA HD. I know that I can create a boot disk on either a floppy or a CD however I think it should be possible for me to install the drivers on an external USB HD? Before I format my drive I just wanted to confirm that this is possible?
View 6 Replies View Relatedinstalling xp on a sata drive as windows xp wont see the drive i know i need the sata drivers but cant find the rights ones for my board its gigabyte g31m-es2l chipset g31 express
View 6 Replies View Relatedwhen i first installed windows and what not i had a floppy drive installed.i need to do a windows repair and to do so i need to install these external sata drivers for my hard drives.i do not have access to a floppy drive and i would like to know if there was anyway to get around using the floppy drive to install these drivers one question i had was would i be able to change the drive letter of one of my dvd drives to A so that windows will install from there instead of an obsolete floppy drive A.
View 9 Replies View Relatedi have a p5s800-vm mother board of asus and the setup of windows xp (pro-sp2) dont find my hard disc and i need to make a floopy from the drivers on the disc to help it found the hard disc. that what i do to make that floopy (as some nice guys here tell me to) i go to the drivers folder on the disc of the motherbord than chose "raid" folder in it i chose the floopyimage folder there i have 3 folders
1.964plus180(181)
2.964_180
3.965_965L
the guys here tell me to put the files of the 965_965L on the floopy without the foler imself. so in the 965_965L folder i have two files "SISRAID and "TXTSETUP.OEM" and aonter folder calld "raid" and in it i have to folders "winxp" and "win2000" and each folder has its own file. so what i do was to put only the "TXTSETUP.OEM" file on the floopy without noting else cause someone here tell me it all i need to do......
I have a fijitsu siemens PC running windows XP home (SP2), I have 2.4ghz CPU, 80G HD and 750 MB of memory. Whilst running for me as the administrator it is slowish but I can live with that. However, when my wife uses "switch user" her "section" once opened runs VERY slowly. Coupled to this when I switch back (even if she logs off) it crashes, I get a message when checking events that her part of the registry was still in use? Is there any way around this it is very irritating especaily her "section" running so blasted slowly
View 5 Replies View RelatedI am Trying to install XP sp 2 on a Fujitsu/Siemens Lifebook s7020 But when starting fron cd, it just give the message, No HDD Found, please check. Bin through the Bios to see if i could find something there, but without luck! I dont have the cd from Fujitsu.
View 4 Replies View RelatedI have a Gateway ML6720 notebook that came with Vista (processor: Intel Dual-Core Mobile Processor T2310 1.46 GHz and memory: 1024 MB 667 MHz DDR2 SDRAM (2 512) Operates at 533 MHz). This laptop does not come with a floppy nor do I have a usb floppy! I would like to "UPGRADE" to win XP Home but the hard drive isn't seen because it's missing the xp sata drivers. I already went to gateways driver site and downloaded the 32bit sata/ mass storage controller, the chipset wich supports XP and the Sigma Tel Audio Driver. I am going to use "nlite" to slipstream the drivers into the XP install disk but have a few questions because I have never done this. First, do I need to insert all drivers into the xp install or just the sata/ mass controller? And If anyone has ever done this could I get you to walk me through it?
View 11 Replies View RelatedI was wondering if it makes any sense to buy and install a SATA 300 controller to work with two WD SATA 300 drives. I kind of doubt I will achieve 300mb buffer to host transfers with only SATA 150 motherboard.
View 6 Replies View RelatedHow do I uninstall all drivers associated with my (windows xp) touch pad. Touch Pad is not working / bad drivers installed drivers over bad drivers.
View 1 Replies View Relatedvideo card on my laptop messed up somehow, i can see a exclamation mark on the device manager in the display drivers tab... now im searching to update my driver but cant find any sources that would suit xp windows now everything is very laggy cuz it shows im not using any video card or something like that anyway?
View 11 Replies View RelatedI purchased a SIIG PCI firmware adapter. It has no drivers and says that it will use Win XP drivers. Well I installed the board and booted the pc, Win XP
recognized the hardware but could not find any drivers. I tried unplugging it manually, installing it in another card slot with no luck. I took it back to
my pc dealer and he plugged it in his system and had no problems. I decide to try another brand, an IO Gear GIC1394.
A friends HP Media Center PC m7077c crashed. Had no recover disk, etc. Installed XP Pro SP2 and I need drivers (according to Device Manager). No sound is obvious but video controller is not. Video seems okay. Where do I find drivers for this machine. XP Pro, Home and MCE are different OS's ... as far as my experience. The drivers are not the same.
View 3 Replies View RelatedWhenever i install drivers on my pc, (i've tried graphics card drivers and wireless network card drivers) my pc stops working. When i installed the graphics card drivers, i tried testing the graphics on a game (counter-strike) but as soon as i got into the game, the pc flashes a blue screen, and reboots. I cant see what the blue screen says because it flashes on and off again to quick for me to read it. I decided to uninstall the graphics card drivers, and the game worked perfectly, but the graphics were REALLY bad. So i thought i might need to update some other drivers, so i tried to install my wireless network card, but when i finished installing the drivers when i had to restart my computer, it flashed the BSOD.... AGAIN! I need help urgently as im going to a LAN gaming comp called "rezidue" and its on in 2 weeks, i need my pc fixed by then! All these problems started when i upgraded my CPU. Everything was running smooth, and i was happily playing along on my computer, when i was asked what my FPS was in counter-strike, and i was all "mine are 65!" and there like "wow that sucks, mines 130" so i set out on my epic quest to get better FPS then everyone else and MAN THAT WAS A MISTAKE. I upgraded from my celeron 2.8ghz cpu to a P4 3.0ghz HT cpu, and thats when things started messing up on me. My entire system is as follows (incase it can help someone help me) P4 3.0ghz HT CPU, Microstar P4 motherboard, 128mb Nvidia Geforce mx4000 AGP x8 graphics card, 256MB ddr ram (recently brought new 1GB ddr ram off ebay just for rezidue! should be here soon!) TP-LINK 54mbps wireless network card) And last but not least
View 13 Replies View RelatedI am trying to find drivers for sound because I reinstaled the Windows HP Home Edition and I can't find the suitable drivers.
View 4 Replies View RelatedI am trying to find drivers for sound because I reinstaled the Windows HP Home Edition and I can't find the suitable drivers.
View 1 Replies View RelatedI just recieved an IBM laptop while downloading some software, it was suggested by the site that I should download all the updated drivers. I am very wary of this advice because I don't want to fix something that doesn't seem to be broken, but at the same time, I would like to be up-to-date. I am running XP Pro, how I should proceed? And where I might safely download such drivers?
View 12 Replies View RelatedIs there anybody who can tell how I can add a driver so that windows Xp recognize this and does a unattended installation of the hardware device (a example is a USB mouse) But the Windows XP is alreay installed so, I am not really looking for a sysprep solution?
View 1 Replies View RelatedI recently reformatted my computer, after it went FUBAR on me, and now I am having some glitchy scrolls whenever I scroll down web pages, and I have no sound, it's the same thing that happened the last time I reformatted it, and it was like 5 months ago, so I can't remember the damned names of the drivers. Any help? I have windows xp home edition, and my graphics card is an ATI.. I remember something on the lines of CCC Catalyst Control Center.
View 5 Replies View Related
