Editing Registry On Secondary Hard Drive - Drive Hooked Up
Jan 19, 2008
i screwed up my registry, and of all things it was the keyboard driver or something, so theres no hope of fixing it on my computer. ive got the drive hooked up as the slave on a different computer, but i cant figure out how to edit the registry on my drive rather than the primary drive. is there any editors that will open it from a file? any way of decompiling it? theres got to be some way to edit it. also, they are both xp.
I am unable to successfully boot up Win2K on my one hard drive because Symantec Ghost is failing to load. Specifically, the error message reads that the Logon User Interface Failed: File c:/Program Files/Symantec/Norton/Ghost/ginastub.dll has failed to load. There is no other option but to restart and it just comes back to this message. All support I have found about this message points to deleting the ginastub.dll Registry key. However, I can't not get to that hard drive's registry because (1) windows does not load, (2) since windows does not completely load, I can not edit the registry through the network. So, I am left with adding the HD as a slave to another computer and editing the Registry that way. Does anyone know how that can be done, editing a secondary hard drive's Registry?
I am using Windows XP and have two hard drives. Until recently I had Windows installed on one hard drive and all my important files (photos, business files, videos, etc) were also on this drive. My other hard drive was completely empty. Suddenly I started encountering problems with Windows and while I was using Windows it would completely freeze. I would pull the plug on the computer and start it again and then it would be fine - for a few hours - and then it would freeze again. The problem started happening more often and more quickly after rebooting and interestingly I noticed over the course of a few days that the problem seemed to be worse whenever my heater was turned on. I left the heater turned off and didn't encounter a problem again for a couple of days, but then it started happening again and more often even while the heater was turned off. I figured because there seemed to be a correlation with the heater being on and the computer's performance that the fans or the power supply inside the computer were over-clogged with dust. I opened up the computer and thoroughly cleaned out all the dust I was able to and made sure all the fans were dust-free. It didn't help. The computer's condition continued to deteriorate and occasionally when I attempted to re-boot the computer it would completely freeze before getting to the Windows boot screen or it would display the following message.
Windows could not start because of a computer disk hardware configuration problem. Could not read from the selected boot disk. Check boot path and disk hardware. Please check the Windows documentation about hardware disk configuration and your hardware reference manuals for additional information. Over the next couple of days the computer wouldn't get to the Windows loading screen at all and it would only boot to the point of displaying the aforementioned message.I took my computer to my friend's house to see if he could fix it. He said that some of the boot.ini files in my version of Windows were damaged or I had accidentally deleted them somehow. Because I was completely unable to load Windows there was no way to do a System Restore so he came up with an alternative plan. He decided to load a new Windows XP onto my other hard drive and use that drive as my master. He said even though Windows was loaded onto the first drive, I would be able to access the files from it with the new Windows in Windows Explorer. So he did it but then we encountered a new problem. The new Windows works fine but for some reason I am unable to access the files from the other hard drive. I think this is because my original Windows had a password on it. When I used to load Windows you had to type a password to login as me and access my files. Otherwise you could only be a guest. But now when I try to access these files an Error message comes up saying these files cannot be accessed. It doesn't even give me the option to type a password.So basically what I want to know is this: Am I able to recover these files from my original hard drive. I really need them for my business and I have five years of family photos on there that are of high sentimental value to me.
My Dell Dimension 4600 is not sensing the hard drive (Seagate ST3120026A Ultra ATA) on boot-up. This happened on first start-up after I used a utility to find and delete temp files and rid the registry of obsolete links. (I know, .... my wife has already said it several times.) I can mount that drive as the second hard disk in my daughter's PC and read every bit -- no problems at all.I'm using an Ultra ATA cable, and I've tried the drive jumper in both Cable Sense and Master. Sounds like the drive spins up, but the bios just doesn't think it's there.
I am on the computer in one room, networking with a computer in another room.I know you can export registry files onto your hard drive. Do you then have the other computer's regedit import that file?
I am having a problem similar to this poster problem http://forums.techguy.org/windows-nt...cond-boot.html I made a mistake editing my second hard drive XP registry. Now it won't boot. My other hard drive will still boot (what I'm writing from) I have a backup of the registry I made in regedit.exe and I download regcool and erunt. Is there a way I can restore me second hard drives registry from another bootable hard drive?
I guess I have a few options (as I have backed up my entire hard drive before the problem started), including hiriing someone if need be. System info: Win XP Pro. For security use KIS 09 and Webroot SpySweeper (henceforth, WSS). This is my desktop. Laptop the same except for Win XP home. After I upgraded the WSS to their latest version (6.1.0.128) I had problems only on desktop and only with MSWord. After two days of working on desktop problem I discovered it was the WSS upgrade, as no problems if WSS shut down or removed via Windows add/remove.
I'm having a problem with installing service pack 2 and can't seem to fix it.I formatted my hard drive last night and installed Windows XP Professional. I then downloaded SP2 and started to install it, the install gets as far as "Updating the Registry Keys" and then it just sits there... It doesn't crash, doesn't start not responding or anything like that, it just sits there and does nothing. Last night i left it sitting for 3 hours and it still hadn't done anything, this morning it's been sitting for about 55 minutes and still nothing.Any thoughts on what could be wrong?
I just recently installed a new hard drive and uploaded windows xp professional. To my surprise I continue to get this box that pops up and says" Critical error message! Registry damaged and corrupted. To fix this problem: open IE and type www.registryxp.com Once you load the web page, close this message window. After you install the cleaner program you will not recieve any more reminders or pop ups like this one". I went to that page and it wants to charge me to sign up for a registry cleaner. This box pops up every 2 minutes or so . I've tried other registry cleaners and pop up blockers, spyware removal, deleting cookies, add/ remove programs, everything I can think of but to no avail. I know that it's hiding somewhere but I'm not too computer literate to go to far into my system without the proper help.
I took out a driver from a computer and installed it as a slave on a new one and tried to copy everything on it but it won't let me access the one main user folder--its say I don't have access rights, but I am logged on as an Administrator. How do I change that?
I'm using a new WD 250GB SATA drive model WD2500AAJS taken out of a new and unused DTVPAL DVR recorder unit by Direct TV as a secondary drive in my Hp Pavillion a100y desktop. Whenever I hook it up, the drive causes the error message Primary Slave Hard Disk Error, Press F1 to enter setup, but then goes to a black screen that just says WAIT, and freezes there. I have an older 500GB WD that works fine hooked up there. The WD tech told me to jump pins 7 and 8 to slow down the speed of the drive to make it compatible with the older computer, but no difference. Is there something done to drives like this one which make them unusable in a PC?
I am experiencing a registry (hive) file failure which does not allow me to load Windows. Whenever I try to boot in safe mode, or any mode, I get a blue screen that reads:i did some searching on this forum and found a thread that mentioned taking the drive out of the problem computer and slaving it into a different machine to repair the registry. I do have another computer, so this would be an option for me although may be a bit too advanced for my expertise or lack thereof. But I have a BlacX hard drive docking station (basically an external hard drive reader)
I have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
My laptop died and I removed the hard drive.i hooked the hard drive up to my new laptop via a SATA/IDE cable.
I can see the old hard drive in the E drive and it appears that all the contents are there by the size of the hard drive (same as when I had it in the old laptop) but I can only see, actually view, a very small percentage of the drive.
My goal: I want to transfer all old music, word documents and photos from old laptop into new laptop.
current HD going bad, have second HD installed and using as back but now i need to make the second HD my primary, can i do this without having to reformat in order to add booting files.
using XP. am having wild swings in my hard drive space go from 46.1 to 44.1 and sometimes in between. have not installed any new programs recently. what could be causing it and how do i correct also am noticing my laptop as slowed appreciablydo know whether the two problems are correlated
i have a Compaq nx 7400 .i was hahving a lot of problems with the computer so i decided to put a new hard drive in and reinstall XP . well i have the new hard drive in and started up the machine and changed the bott options to run from the dvd and all went fine until i should press the ENTER ( return ) button to install XP now . as soon as i did that the next window said no hard drive found . this was also happening on the old hard drive that was in the machine .
can u explain with a example please.Example : disabling autorun for CD drive[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesCdrom]"AutoRun"=dword:00000000 [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionpoliciesExplorerNoDriveTypeAutoRun]"NoDriveTypeAutoRun"=dword:000000b1[HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer]"NoDriveTypeAutoRun"=dword:000000b1 Any website for learning registry editing?
I use XP and I am the administator, but I'm not allowed to use the registry editor. How do I find/access the editor and/or change the properties so I can edit reg files?
Windows XP lets remote registry editing by running a service for it. Below are the step-by-step instructions to disable this security hole:1. Goto your control panel (you can do this by clicking on your start menu)2. Select administrative tools - services3. On the right panel, find the service called "remote registry"4. Right click on it and select properties5. In the startup type option box, select disable6. Reboot you computer and repeat steps 1-4. You should see it won't be running anymore.
Disable the Windows registry editors, Regedit.exe and Regedt32.exe.If this setting is enabled and the user tries to start a registry editor, a message appears explaining that a setting prevents the action.To prevent users from using other administrative tools, use the "Run only allowed Windows applications" setting.START > RUN > GPEDIT.MSC > USER CONFIGURATION > ADMINISTRATIVE TEMPLATES > SYSTEM > FIND PREVENT ACCESS TO REGISTRY EDITING TOOLS > RIGHT CLICK > PROPERTIES > CLICK ENABLE > OK > REBOOT
When installing a larger main drive, how do I get the drivers copied onto the slave before I take out the main one I wonder is there a simple way of doing this, I am using Windows XP home edition, the PC is an oldish one and isn't any specific make, so I can't get any clever programs from the manufacturers site
I use Cobian Backup to produce a zip-file containing all files and folders, except for temporary-folders (I added an exclude-filter), of my system.Before I can rely on this method, I need to find a way of restoring the 27 gb zip-file, which I store on a networked drive, easily. how booting up a laptop with a formatted harddrive, be able to access a network-drive and extract all the contents of the networked zip-file to the hard drive?
A little over a year ago I purchased a used IBM Thinkpad laptop from ebay for my wife. It came with Windows 2000 Professional installed and everything worked fine. No CDs or floppies came with the computer. A couple of months later, it was stolen by one of her business associates. It eventually was recovered, but the thief had installed Windows XP along with the OS that was already installed. In trying to remove XP and return the machine to its original state, I somehow managed to eventually not be able to use either OS. As it stands now I have no OS and cannot even access my hard drive.When I boot from a floppy then try to change to C: drive, I get the error message: Invalid media type reading drive c: Abort, Retry, Fail?
A friend gave me a laptop, my problem is that it came from Japan thus everything is japanase thus I can't hardly use it. The reason I accept it is bcoz he said I can try to reinstall a win xp with english version (btw, the OS is win xp pro in japanase version). Thus I bought win xp pro sp2 and try to reinstall it, so I reboot fm cd rom and while the windows setup is starting, the system stopped and the message on my screen read as:A problem has been detected and windows has been shutdown to prevent damage to your computer.If this is the first time you've seen this error screen, restart your computer. If this screen appears again follow these steps:Check for viruses on your computer, resume any newly installed hard drives or hard drive controllers, check your hard drive to make sure it is porperly configured and terminated. Run CHKDSK/F to check hard drive corruption. then restart computer. how in the world I can follow the above steps if everything written on it are in japanase language? I also try to visit the manufacture's website, thinking that perhaps it help solve the problem but....i also need a japanase translator to understand it.
I had to reinstall XP because of spyware issues. I saved important data on my slave drive. I reinstalled XP. Now the bios, device manager, and disk manager recognizes the slave drive but didn't assign it a drive letter. In disk manager it shows as a basic disk, NTFS, Healthy (Active), 18.65 GB,Online. When I right click the volume to assign a drive letter it is grayed out.
I have just bought and installed (to the point of completing initialization under Disk Management) a new 1 TB hard drive. Originally, I was planning to use it solely for data storage.However, I am thinking of installing Windows XP Pro and all the programs I currently use on it, thereby making it the new OS and programs drive, while using the original 120 GB HD as a data/backup drive.I think the main appeal of doing this, for me, is that it also presents an opportunity to reinstall Windows on a machine which hasn't had this done for more than three years, and which currently seems to take at least five minutes to boot to a "usable" state, despite having a reasonably high spec for its age (it was bought in 2001, but as a result of the upgrade
I have 69.1 memory free from 74.5 and i noticed no matter how much i delete i cant get up into the 70s.For example this month i have deleted a ton of music files that came up to about 400mb,Then a few programs that were around 50mb each and still nothing .If anything it seems i am going down in memory instead of gaining from deleting these programs.
I had this idea, see if anybody has an opinion about this. My wife has an old XP computer I want to buy her a new one but she doesn't like the vista and she wants to keep the old xp operating system. What I want to do is take the old hard drive and put it in the new computer as the master and take the new hard drive and put it in as the slave erasing the vista off it. Then using the master slave way can I transfer the xp operating system and all her files and data from the old hard drive to the new one.
