Editing Secondary Hard Drive's Registry
Apr 27, 2004
I am unable to successfully boot up Win2K on my one hard drive because Symantec Ghost is failing to load. Specifically, the error message reads that the Logon User Interface Failed: File c:/Program Files/Symantec/Norton/Ghost/ginastub.dll has failed to load. There is no other option but to restart and it just comes back to this message. All support I have found about this message points to deleting the ginastub.dll Registry key. However, I can't not get to that hard drive's registry because (1) windows does not load, (2) since windows does not completely load, I can not edit the registry through the network. So, I am left with adding the HD as a slave to another computer and editing the Registry that way. Does anyone know how that can be done, editing a secondary hard drive's Registry?
View 8 Replies
ADVERTISEMENT
Jan 19, 2008
i screwed up my registry, and of all things it was the keyboard driver or something, so theres no hope of fixing it on my computer. ive got the drive hooked up as the slave on a different computer, but i cant figure out how to edit the registry on my drive rather than the primary drive. is there any editors that will open it from a file? any way of decompiling it? theres got to be some way to edit it. also, they are both xp.
View 4 Replies
View Related
Mar 5, 2008
I am using Windows XP and have two hard drives. Until recently I had Windows installed on one hard drive and all my important files (photos, business files, videos, etc) were also on this drive. My other hard drive was completely empty. Suddenly I started encountering problems with Windows and while I was using Windows it would completely freeze. I would pull the plug on the computer and start it again and then it would be fine - for a few hours - and then it would freeze again. The problem started happening more often and more quickly after rebooting and interestingly I noticed over the course of a few days that the problem seemed to be worse whenever my heater was turned on. I left the heater turned off and didn't encounter a problem again for a couple of days, but then it started happening again and more often even while the heater was turned off. I figured because there seemed to be a correlation with the heater being on and the computer's performance that the fans or the power supply inside the computer were over-clogged with dust. I opened up the computer and thoroughly cleaned out all the dust I was able to and made sure all the fans were dust-free. It didn't help. The computer's condition continued to deteriorate and occasionally when I attempted to re-boot the computer it would completely freeze before getting to the Windows boot screen or it would display the following message.
Windows could not start because of a computer disk hardware configuration problem. Could not read from the selected boot disk. Check boot path and disk hardware. Please check the Windows documentation about hardware disk configuration and your hardware reference manuals for additional information. Over the next couple of days the computer wouldn't get to the Windows loading screen at all and it would only boot to the point of displaying the aforementioned message.I took my computer to my friend's house to see if he could fix it. He said that some of the boot.ini files in my version of Windows were damaged or I had accidentally deleted them somehow. Because I was completely unable to load Windows there was no way to do a System Restore so he came up with an alternative plan. He decided to load a new Windows XP onto my other hard drive and use that drive as my master. He said even though Windows was loaded onto the first drive, I would be able to access the files from it with the new Windows in Windows Explorer. So he did it but then we encountered a new problem. The new Windows works fine but for some reason I am unable to access the files from the other hard drive. I think this is because my original Windows had a password on it. When I used to load Windows you had to type a password to login as me and access my files. Otherwise you could only be a guest. But now when I try to access these files an Error message comes up saying these files cannot be accessed. It doesn't even give me the option to type a password.So basically what I want to know is this: Am I able to recover these files from my original hard drive. I really need them for my business and I have five years of family photos on there that are of high sentimental value to me.
View 7 Replies
View Related
Jan 16, 2005
I wish to buy a external hard drive as I plan to start editing my home movies. What would be a good hard drive for this purpose?
View 9 Replies
View Related
Jun 19, 2008
can u explain with a example please.Example : disabling autorun for CD drive[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesCdrom]"AutoRun"=dword:00000000
[HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionpoliciesExplorerNoDriveTypeAutoRun]"NoDriveTypeAutoRun"=dword:000000b1[HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer]"NoDriveTypeAutoRun"=dword:000000b1 Any website for learning registry editing?
View 2 Replies
View Related
Nov 28, 2004
I use XP and I am the administator, but I'm not allowed to use the registry editor. How do I find/access the editor and/or change the properties so I can edit reg files?
View 14 Replies
View Related
Aug 12, 2002
Windows XP lets remote registry editing by running a service for it. Below are the step-by-step instructions to disable this security hole:1. Goto your control panel (you can do this by clicking on your start menu)2. Select administrative tools - services3. On the right panel, find the service called "remote registry"4. Right click on it and select properties5. In the startup type option box, select disable6. Reboot you computer and repeat steps 1-4. You should see it won't be running anymore.
View 9 Replies
View Related
Aug 12, 2002
Disable the Windows registry editors, Regedit.exe and Regedt32.exe.If this setting is enabled and the user tries to start a registry editor, a message appears explaining that a setting prevents the action.To prevent users from using other administrative tools, use the "Run only allowed Windows applications" setting.START > RUN > GPEDIT.MSC > USER CONFIGURATION > ADMINISTRATIVE TEMPLATES > SYSTEM > FIND PREVENT ACCESS TO REGISTRY EDITING TOOLS > RIGHT CLICK > PROPERTIES > CLICK ENABLE > OK > REBOOT
View 9 Replies
View Related
Apr 25, 2008
My Dell Dimension 4600 is not sensing the hard drive (Seagate ST3120026A Ultra ATA) on boot-up. This happened on first start-up after I used a utility to find and delete temp files and rid the registry of obsolete links. (I know, .... my wife has already said it several times.) I can mount that drive as the second hard disk in my daughter's PC and read every bit -- no problems at all.I'm using an Ultra ATA cable, and I've tried the drive jumper in both Cable Sense and Master. Sounds like the drive spins up, but the bios just doesn't think it's there.
View 12 Replies
View Related
Apr 21, 2006
I am on the computer in one room, networking with a computer in another room.I know you can export registry files onto your hard drive. Do you then have the other computer's regedit import that file?
View 5 Replies
View Related
Sep 8, 2008
I am having a problem similar to this poster problem http://forums.techguy.org/windows-nt...cond-boot.html I made a mistake editing my second hard drive XP registry. Now it won't boot. My other hard drive will still boot (what I'm writing from) I have a backup of the registry I made in regedit.exe and I download regcool and erunt. Is there a way I can restore me second hard drives registry from another bootable hard drive?
View 8 Replies
View Related
Jul 9, 2009
I guess I have a few options (as I have backed up my entire hard drive before the problem started), including hiriing someone if need be.
System info: Win XP Pro. For security use KIS 09 and Webroot SpySweeper (henceforth, WSS). This is my desktop. Laptop the same except for Win XP home.
After I upgraded the WSS to their latest version (6.1.0.128) I had problems only on desktop and only with MSWord. After two days of working on desktop problem I discovered it was the WSS upgrade, as no problems if WSS shut down or removed via Windows add/remove.
View 6 Replies
View Related
Mar 19, 2010
I'm having a problem with installing service pack 2 and can't seem to fix it.I formatted my hard drive last night and installed Windows XP Professional. I then downloaded SP2 and started to install it, the install gets as far as "Updating the Registry Keys" and then it just sits there... It doesn't crash, doesn't start not responding or anything like that, it just sits there and does nothing. Last night i left it sitting for 3 hours and it still hadn't done anything, this morning it's been sitting for about 55 minutes and still nothing.Any thoughts on what could be wrong?
View 3 Replies
View Related
Apr 14, 2007
I just recently installed a new hard drive and uploaded windows xp professional. To my surprise I continue to get this box that pops up and says" Critical error message! Registry damaged and corrupted. To fix this problem: open IE and type www.registryxp.com Once you load the web page, close this message window. After you install the cleaner program you will not recieve any more reminders or pop ups like this one". I went to that page and it wants to charge me to sign up for a registry cleaner. This box pops up every 2 minutes or so . I've tried other registry cleaners and pop up blockers, spyware removal, deleting cookies, add/ remove programs, everything I can think of but to no avail. I know that it's hiding somewhere but I'm not too computer literate to go to far into my system without the proper help.
View 6 Replies
View Related
Sep 17, 2006
I took out a driver from a computer and installed it as a slave on a new one and tried to copy everything on it but it won't let me access the one main user folder--its say I don't have access rights, but I am logged on as an Administrator. How do I change that?
View 3 Replies
View Related
Jul 17, 2010
I'm using a new WD 250GB SATA drive model WD2500AAJS taken out of a new and unused DTVPAL DVR recorder unit by Direct TV as a secondary drive in my Hp Pavillion a100y desktop. Whenever I hook it up, the drive causes the error message Primary Slave Hard Disk Error, Press F1 to enter setup, but then goes to a black screen that just says WAIT, and freezes there. I have an older 500GB WD that works fine hooked up there. The WD tech told me to jump pins 7 and 8 to slow down the speed of the drive to make it compatible with the older computer, but no difference. Is there something done to drives like this one which make them unusable in a PC?
View 11 Replies
View Related
Jul 3, 2010
I am experiencing a registry (hive) file failure which does not allow me to load Windows. Whenever I try to boot in safe mode, or any mode, I get a blue screen that reads:i did some searching on this forum and found a thread that mentioned taking the drive out of the problem computer and slaving it into a different machine to repair the registry. I do have another computer, so this would be an option for me although may be a bit too advanced for my expertise or lack thereof. But I have a BlacX hard drive docking station (basically an external hard drive reader)
View 4 Replies
View Related
Mar 5, 2010
I have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
View 1 Replies
View Related
Aug 5, 2010
My laptop died and I removed the hard drive.i hooked the hard drive up to my new laptop via a SATA/IDE cable.
I can see the old hard drive in the E drive and it appears that all the contents are there by the size of the hard drive (same as when I had it in the old laptop) but I can only see, actually view, a very small percentage of the drive.
My goal: I want to transfer all old music, word documents and photos from old laptop into new laptop.
View 6 Replies
View Related
Oct 13, 2009
current HD going bad, have second HD installed and using as back but now i need to make the second HD my primary, can i do this without having to reformat in order to add booting files.
View 2 Replies
View Related
Dec 5, 2007
using XP. am having wild swings in my hard drive space go from 46.1 to 44.1 and sometimes in between. have not installed any new programs recently. what could be causing it and how do i correct also am noticing my laptop as slowed appreciablydo know whether the two problems are correlated
View 3 Replies
View Related
Jul 2, 2008
i have a Compaq nx 7400 .i was hahving a lot of problems with the computer so i decided to put a new hard drive in and reinstall XP .
well i have the new hard drive in and started up the machine and changed the bott options to run from the dvd and all went fine until i should press the ENTER ( return ) button to install XP now . as soon as i did that the next window said no hard drive found . this was also happening on the old hard drive that was in the machine .
View 5 Replies
View Related
Oct 13, 2008
I had this idea, see if anybody has an opinion about this. My wife has an old XP computer I want to buy her a new one but she doesn't like the vista and she wants to keep the old xp operating system. What I want to do is take the old hard drive and put it in the new computer as the master and take the new hard drive and put it in as the slave erasing the vista off it. Then using the master slave way can I transfer the xp operating system and all her files and data from the old hard drive to the new one.
View 3 Replies
View Related
Oct 7, 2010
We have Windows XP Home Edition 80 GBCan we copy entire hard drive to an external hard drive?
View 36 Replies
View Related
Oct 5, 2006
Can anyone tell me whats the difference between a ATA hard drive and a SATA hard drive?
View 2 Replies
View Related
May 2, 2008
I have a work notebook (D610) which is configured for dual screen at work. I placed items on the extended area (screen 2) and when I fire up the machine @ home using just the notebook on its own all the items I have placed on the secondary monitor are goneThe only way I seem to be able to recorver the items is to plug in my monitor at home and drag the items back to the primary display
View 5 Replies
View Related
Dec 21, 2008
i bought a game that need 10 gig but i partition c drivve to 20 gig only and i tried everything to get more disk space but still i got not enough.Installshield wizard doesnt let me install in E: drive which is my secondary drive.i have plenty of space there but i cant install it there,why?
View 2 Replies
View Related
Apr 14, 2005
Is there any difference between the primary and secondary IDE channels? I have my hard drive on secondary and my DVD 16X burner on primary. I tried this because when I put my DVD burner on secondary it would only get Multi-Word DMA mode 2 while the HDD got UDMA mode 5 on the primary. This is a new burner and capable of UDMA 4. After troubleshooting I switched channels and got UDMA mode 4 on the DVD burner when on the primary as master and still got UDMA mode 5 on the only HDD on the secondary as master. I don't understand the difference and the computer works fine and it appears I am getting the transfer modes I am supposed to.
View 6 Replies
View Related
Oct 18, 2009
I recently helped someone save the documents off of their computer after it crashed (it was missing a Windows file. I tried the repair command and it wouldn't work, so I decided to save the files and reformat the hard drive).I plugged the hard drive into a working computer and pulled all the documents off of it (VERY slowly) onto an external hard drive.
Every once in awhile I wouldn't be able to pull a picture or document off because of a cyclic redundancy check error. I just moved on and saved what I could. I assumed it was because the hard drive was already bad so I just moved what I could.
View 9 Replies
View Related
Jul 9, 2005
i put together a system the other day after my old one totally pooped out on me. i installed the hard drive from my old system into the new one as a second hard drive, and installed xp pro onto a different hard drive (primary master) in the new system.
how can i use all my old programs that are installed on the old hard drive without confusing the heck out of xp? many of the applications on the old hdd are confused when i run them, i am guessing because when they reference files in locations where they think they should be, but they are not finding them. i don't even have enough room on the primary master drive to install all the programs, its a very small drive. nor do i have enough room to fit xp onto the second hard drive.
View 12 Replies
View Related
Aug 11, 2005
I have a Western Digital 200 GB secondary internal hard disk, which has been
working fine for the last couple of years. Recently, while trying to access
this disk, Windows pops a message saying "The disk in this drive is not
formatted. Do you want to format it now?"Windows Device Manager indicates that the drive is working properly.I ran Western Digital diagnostic tests on the drive, and they too indicate that there is nothing wrong with the drive.However, looking at the drive properties in Disk Management, the OS is not able to detect a file ststem on the drive, and thinks that 100% space is available for use.
View 6 Replies
View Related
