I have a Western Digital 200 GB secondary internal hard disk, which has been
working fine for the last couple of years. Recently, while trying to access
this disk, Windows pops a message saying "The disk in this drive is not
formatted. Do you want to format it now?"Windows Device Manager indicates that the drive is working properly.I ran Western Digital diagnostic tests on the drive, and they too indicate that there is nothing wrong with the drive.However, looking at the drive properties in Disk Management, the OS is not able to detect a file ststem on the drive, and thinks that 100% space is available for use.
I wanted to burn a CD and so I put the CD into the computer and opened up windows media but it can't detect the disk or the drive. I went to another burner and the same thing occured except this time I got a message saying the following: "There are no compatible CD drives reported."I then exited and popped in a disk for a game.. I hear the drive accept the disk and it sounds like it is about to load but nothing happens. Its like the cd drive is non functional. My question is what might have happened and can I fix this/ how?
I'm using a new WD 250GB SATA drive model WD2500AAJS taken out of a new and unused DTVPAL DVR recorder unit by Direct TV as a secondary drive in my Hp Pavillion a100y desktop. Whenever I hook it up, the drive causes the error message Primary Slave Hard Disk Error, Press F1 to enter setup, but then goes to a black screen that just says WAIT, and freezes there. I have an older 500GB WD that works fine hooked up there. The WD tech told me to jump pins 7 and 8 to slow down the speed of the drive to make it compatible with the older computer, but no difference. Is there something done to drives like this one which make them unusable in a PC?
i have got the same problem....but when i insert a windows xp cd it is unable to detect it so the problem continues to be there itself...and more over i am using gigabyte mother board.and if i insert that cd.the monitor displays"FD 1.44MB System type(13)"gigabyte bootCD loader. press any key to boot from CD-ROM" when i press a key...it shows.."hard drive not installed properly press any key to restart"
Hello Friends,I have problem regarding my hard disk!I have 2 hard disk's. 160gb segate barracuda (SATA) & 80gb segate barracuda (SATA).I was having windows vista. My computer was running smoothly that time with 2 hard disk's.I formatted my PC and installed windows xp.While installing windows xp i didn't connect my 80Gb hard disk.But after installation, when i tried to connect it , my computer started hanging.160Gb is my primary hdd and 80gb is secondary hard disk.I never had any OS on 80Gb. My computer hangs at windows xp boot screen.I tried at my friend's place also... tried all jumper settings also but no use. What could be the problem?
I have always used Windows to burn my cd's. Two days ago I got the message No CD or DVD device has been detected. I have Windows XP, Dell 4400, service pack 2, and while I can burn CD's with my other burner (Roxio), I really like Windows because of its features.
My modem stopped working, received and installed new modem on Wednesday, computer worked fine. now system keeps restarting, when I tried F8 command, menu comes up, but when I try to enter anything, I get very quick "NT Detect Failed" and then computer keeps restarting.
can anyone tell me how to overcome a boot problem.When starting a computer that has not been used for some time it fails to boot from any disk i.e. floppy, hard drive or cd.It gets so far then this message appears,corrupted file dac2w2k.sys even with Windows XP setup floppies.It gets to the GeForce splash screen then just keeps repeating to this point.
Computer is suddenly running chk disk at bootup - anyone know why that would suddenly start to happen. I don't know how to even enable it - and really want to disable it. How do I do that? No errors are reported when it finishes. Also if I go to error checking when windows finally boots, it won't run because certain system files cannot be accessed.
Just recently, I noticed my computer acting a little slow than normal so I went to check my task manager. I found out that my total physical memory was "halved". I have 1GB of RAM installed but the task manager only shows half of it, 512MB. I went to check msinfo and it showed that I had 1GB of RAM installed.This problem occurs on a somewhat random basis, sometimes it shows I have 1GB of RAM installed sometimes not. In some applications like CCleaner, it also reflects the same RAM info as my task manager.Any permanent workaround for this problem? Or is this a hardware fault? When this problem occurs, my pc is not making full use of my 1GB of ram, hence the sluggish performance I noticed as of late. Below are screenshots to illustrate what I mean.
I recently sent my computer for repair due to virus-related problems. Anyway, the repair person had to reinstall Win XP(Home) from scratch and told me that he had partitioned the drive (and without my permission!) in two: DBackup and CSystem (Backup consists of the files from the previous system). I notice that there is a duplication of files due to this partition. For example, song A would appear twice on Win Media PlayerCDocumentsandSettings/Owner/My Documents/MyMusic/SongA AND Dmydocbackup/MyMusic/SongA). I don't know if there are any duplication of other files yet. Plus, I realised during Disk Cleanup that the system's Temporary Internet Files is located in 'Backup drive' instead of 'System'. Shouldn't this folder be in the other drive i.e. system drive, since Backup is just,well, backup(of the old drive). The WINDOWS folder also appears in both drives.
I've never had partitioned drives so this is causing major headaches for me. If there is a need for me to un-partition my drives to clear the mess, can I do it without re-installing the whole system from the Cd? Sorry it's a long one How many times can you reinstall from the Cd before it cannot be used anymore (I hear there is a limit)
A week after updating to most current Windows SP1critical updates (its only change I can think of) I happen to notice that I cannot run a disk error check, I am told that its a NTFS file system and Win cannot open volume for check. Also when I start computer I have to log on with my password every. I have tried to eliminate the password requirement to no avail. I cannot return to pre-update status with System Restore because its been a week and there is too much new data in the system. This is a free standing desktop PC. Can anyone help with these two things? I hope so as I do my error check regularly and find it frustrating to have to log on every time I restart .
I have a work notebook (D610) which is configured for dual screen at work. I placed items on the extended area (screen 2) and when I fire up the machine @ home using just the notebook on its own all the items I have placed on the secondary monitor are goneThe only way I seem to be able to recorver the items is to plug in my monitor at home and drag the items back to the primary display
I have files in my recycle bin. My recycle bin shows nothing when I open the folder but there is 6 items in the folder. I have tried to delete them through C: ecycler but when I try that I get an error on the bottom of my screen that says The file or directory is corrupted and unreadable.
I am running windows xp sp3. I tried to uninstall Frost Wire, via add or remove programs. I noticed that after it supposedly uninstalled from the a or r file the shortcut was still listed on my desktop. So I searched for F W and found a few references that popped up after my search. When I right clicked on them and tried to delete, that is when I received the above error message
I usually backup my weeks work on Friday afternoons. What I do is run a "search" for all files created or modified within the last 7 days and then "copy" all relevant files to a folder on an external hard drive, and then burn a CD.
Everynow and then, I get the following message. "Cannot Copy File: Cannot Read From the Source File or Disk"
i bought a game that need 10 gig but i partition c drivve to 20 gig only and i tried everything to get more disk space but still i got not enough.Installshield wizard doesnt let me install in E: drive which is my secondary drive.i have plenty of space there but i cant install it there,why?
Is there any difference between the primary and secondary IDE channels? I have my hard drive on secondary and my DVD 16X burner on primary. I tried this because when I put my DVD burner on secondary it would only get Multi-Word DMA mode 2 while the HDD got UDMA mode 5 on the primary. This is a new burner and capable of UDMA 4. After troubleshooting I switched channels and got UDMA mode 4 on the DVD burner when on the primary as master and still got UDMA mode 5 on the only HDD on the secondary as master. I don't understand the difference and the computer works fine and it appears I am getting the transfer modes I am supposed to.
i am having problems with installing usb drive as it shows up in disk management but my computer won`t detect it anyone have any ideas how i can solve the problem i have a gigabyte ga-g31m-es2l motherboard,i am running windows xp 64 bit
after a search, when I click on a file and try to delete it, do I often get a msg. saying: Cannot delete file:Cannot read from the source file or disk If it found it for the search, why can't if read it from the source file or disk
I cant deleted this file on my desktop. It is an empty file(0 bytes), I tried renaming it and tried deleting it in safe mode. still I get " Cannot delete file: Cannot read from the source file or disk." I did a search for the file and nothing shows! not even the actual file that is on my desktop. So used "registry cleaner" to see if it will delete it...nope. I tried safe mode again and the same problem. I ran AVG, Norton, Escan, Hijack, all came clean. nothing wrong.
i put together a system the other day after my old one totally pooped out on me. i installed the hard drive from my old system into the new one as a second hard drive, and installed xp pro onto a different hard drive (primary master) in the new system. how can i use all my old programs that are installed on the old hard drive without confusing the heck out of xp? many of the applications on the old hdd are confused when i run them, i am guessing because when they reference files in locations where they think they should be, but they are not finding them. i don't even have enough room on the primary master drive to install all the programs, its a very small drive. nor do i have enough room to fit xp onto the second hard drive.
I am unable to successfully boot up Win2K on my one hard drive because Symantec Ghost is failing to load. Specifically, the error message reads that the Logon User Interface Failed: File c:/Program Files/Symantec/Norton/Ghost/ginastub.dll has failed to load. There is no other option but to restart and it just comes back to this message. All support I have found about this message points to deleting the ginastub.dll Registry key. However, I can't not get to that hard drive's registry because (1) windows does not load, (2) since windows does not completely load, I can not edit the registry through the network. So, I am left with adding the HD as a slave to another computer and editing the Registry that way. Does anyone know how that can be done, editing a secondary hard drive's Registry?
I am using Windows XP and have two hard drives. Until recently I had Windows installed on one hard drive and all my important files (photos, business files, videos, etc) were also on this drive. My other hard drive was completely empty. Suddenly I started encountering problems with Windows and while I was using Windows it would completely freeze. I would pull the plug on the computer and start it again and then it would be fine - for a few hours - and then it would freeze again. The problem started happening more often and more quickly after rebooting and interestingly I noticed over the course of a few days that the problem seemed to be worse whenever my heater was turned on. I left the heater turned off and didn't encounter a problem again for a couple of days, but then it started happening again and more often even while the heater was turned off. I figured because there seemed to be a correlation with the heater being on and the computer's performance that the fans or the power supply inside the computer were over-clogged with dust. I opened up the computer and thoroughly cleaned out all the dust I was able to and made sure all the fans were dust-free. It didn't help. The computer's condition continued to deteriorate and occasionally when I attempted to re-boot the computer it would completely freeze before getting to the Windows boot screen or it would display the following message.
Windows could not start because of a computer disk hardware configuration problem. Could not read from the selected boot disk. Check boot path and disk hardware. Please check the Windows documentation about hardware disk configuration and your hardware reference manuals for additional information. Over the next couple of days the computer wouldn't get to the Windows loading screen at all and it would only boot to the point of displaying the aforementioned message.I took my computer to my friend's house to see if he could fix it. He said that some of the boot.ini files in my version of Windows were damaged or I had accidentally deleted them somehow. Because I was completely unable to load Windows there was no way to do a System Restore so he came up with an alternative plan. He decided to load a new Windows XP onto my other hard drive and use that drive as my master. He said even though Windows was loaded onto the first drive, I would be able to access the files from it with the new Windows in Windows Explorer. So he did it but then we encountered a new problem. The new Windows works fine but for some reason I am unable to access the files from the other hard drive. I think this is because my original Windows had a password on it. When I used to load Windows you had to type a password to login as me and access my files. Otherwise you could only be a guest. But now when I try to access these files an Error message comes up saying these files cannot be accessed. It doesn't even give me the option to type a password.So basically what I want to know is this: Am I able to recover these files from my original hard drive. I really need them for my business and I have five years of family photos on there that are of high sentimental value to me.
I had an IP address conflict and that is resolved now that I added a router (Linksys WRT54G). I am trying to reconnect my old hardwired network (which consists of only two computers) using the router (the wireless is for the future system). I can do everything on the main computer -connect to internet, and ping the other computer. I can also ping the main one from the second one once all the firewalls are down.I ran the Windows XP network wizard, saved the "disc", ran it on the other computer. The problem is when I try the secondary computer to contact the first (which has shared files and the internet connection) I get an access denied window. Both have the same Group name. The second computer has all the shared folders listed from the main computer but maybe that is from the original pre-router setup.
No matter how many times I run the wizard I do not see the other (2nd) computer listed on the "my network places" on the main computer. All I see is the the router and an MSN link (if I click on the router it sends me to the router setting on Linksys) How can I fix this and add the second computer? Thanks - hopefully you'll get back to me before I pull all of my hair out!Also, I tried the "add a network place wizard". The drop down menu lists the folder I want to add "\LOUISSharedDocs". When I tried that, or the IP address of the computer it says "folders not valid". I double checked on the second computer the names as above and that is how they are.
I took out a driver from a computer and installed it as a slave on a new one and tried to copy everything on it but it won't let me access the one main user folder--its say I don't have access rights, but I am logged on as an Administrator. How do I change that?
somehow, i accidently stumbled into a method of dual-booting 2 OpSystems (WinXP/WinME specifically). I have WinXP on one HDD, set as active on the Primary Master ide controller. I also have WinME on another HDD set as active on the Secondary Master ide controller.i can choose which OS to bootup at whim, simply by going into BIOSBoot Tabhit enter on HardDrive and then choose which HDD to boot. Then i exit that tab, exit BIOS "SaveYes". Either HDD will boot. its simple, it works well. its differant from the orthodox way of setting up a dual-boot. Booting NTFS WinXP, files on the WinME FAT HDD are read by XP. But not the other way.
For a whole month now I have carefully set up the new notebook described below after successfully, but laboriously, running a 1997 Dell PII300-SCSI 128-SDRAM Win98SE system for 8 years. I've now reached a point where I need help on several issues from some of you who are far ahead of me when it comes to running a modern system. There are no major problems so far, just some minor performance issues and a few questions in areas in which I know little or nothing.
One instance of a freeze (when running Norton Speed Disk) which turned out to be a bad cluster and was repaired by ChkDsk. One instance of stalling @ the "windows is shutting down" window (shutdown only). There have been two instances of noticeable decline in peak performance: A.) after installing Norton System Works. I immediately uninstalled Go Back, which really helped, and B.) after replacing one of the installed 256mb sticks of RAM with a 1GB stick from Crucial. I only mention this because I deliberately delayed installation until maximium system performance had been consistently sustained. [This is nothing major, just a slight delay and/or menus briefly going blank when starting some programs and a slight delay in application reaction time, which usually manifests itself at the start of sessions, and late sluggishness in long sessions] I only mention this in the event that I'm wrong and can be corrected, because I believe this must be a coincidence and not due to the hardware (unless there is a setting or something in Windows that needs changing to accommodate the additional RAM) - and the solution to regaining peak performance lies in Windows and/or Norton System Works....
