i am having problems with installing usb drive as it shows up in disk management but my computer won`t detect it anyone have any ideas how i can solve the problem i have a gigabyte ga-g31m-es2l motherboard,i am running windows xp 64 bit
View 1 RepliesHello Friends,I have problem regarding my hard disk!I have 2 hard disk's. 160gb segate barracuda (SATA) & 80gb segate barracuda (SATA).I was having windows vista. My computer was running smoothly that time with 2 hard disk's.I formatted my PC and installed windows xp.While installing windows xp i didn't connect my 80Gb hard disk.But after installation, when i tried to connect it , my computer started hanging.160Gb is my primary hdd and 80gb is secondary hard disk.I never had any OS on 80Gb. My computer hangs at windows xp boot screen.I tried at my friend's place also... tried all jumper settings also but no use. What could be the problem?
View 7 Replies View RelatedWhen trying to install Win XP SP2 there was always a message telling me that it coudn't detect the HDD (Checked Bios, it is detecting everything: Processor, Ram, DVD units and HDD) Well, after several times trying, i decided to put the HDD on my nephew's computer and install Win XP w/o the drivers. Back to my system, connected the HDD and turn it on, but when the XP logo appears, the system reboots, and it happened every time i tried it.
Having a copy of Vista (30 days sample) i decided to install it, and it was installed w/o problems, everything was perfect.So (at last) my cuestion is ...Can i install Win XP on this system? or,there is a feature on P35 that only accept Vista?, orthere is something that i forgot to do? I want XP and not Vista (I will need to buy Vista and I dont have $$$, yet)
I have an old HD From a system that I got rid of. I want to put it into a friends system to see if I can retrieve the files off of it and put it onto my external HD. The hard drive was the boot disk and the computer I am installing it on has it's own boot disk. If I boot up with two boot disks will there be a problem? Is there anything I need to take into account before doing this? I am planning on installing the old HD onto an ATA cable that I unplugged from the DVD drive. The HD that is in this system is not on an ATA cable, I'm not sure what it is connected to, just a small plug with a blue cable going to the mother board.
View 3 Replies View RelatedBefore I start, I should tell you all that I am re-posting this with all of the original correspondence at the end.I've done as described, put both drives back into their proper place on the tape and into the proper order (DVD-RW - master, DVD-ROM - slave). On a hunch, I decided to pop in a DVD-R disc, and this was detected just fine. I also put in a DVD-RW disc, but it was not detected. Seeing as how I have data I want to append to an old DVD-RW disc, is there anything left to do?
View 12 Replies View RelatedIn device manager under IDE ATA/ATAPI controllers -> Primary Controller for Device 0 under advanced settings the transfer mode is set to: DMA if avaliable, the Current Mode is: PIO Mode.The hard drive is a 80G western Digital i think the WD800JD which is on its own ide cable connected to the primary connector on the motherboard. I am using windows XP Professional and the PCCHIPS MB. Also, when i start up my computer and it detects the devices for the hard drive it says its in Ultra DMA Mode 4 or 5, but in windows it isnt.
View 9 Replies View RelatedI wanted to burn a CD and so I put the CD into the computer and opened up windows media but it can't detect the disk or the drive. I went to another burner and the same thing occured except this time I got a message saying the following: "There are no compatible CD drives reported."I then exited and popped in a disk for a game.. I hear the drive accept the disk and it sounds like it is about to load but nothing happens. Its like the cd drive is non functional. My question is what might have happened and can I fix this/ how?
View 13 Replies View RelatedI have a pc with 2 hardrives that has been working for quite a while now. One drive is IDE and another is a
sata drive. the sata drive has a partition in which windows xp is installed on. Now its time to format this computer and give it a fresh new start, but then I start the windows set-up from the boot disc it doesnt detect the sata drive.
I wanted to do is remove Vista from it and reinstall XP. I have already run DBAN (Darik's Boot and Nuke) to wipe the drive, but WinXP does not detect the drive. I have Windows XP Pro SP1. Now, I have tried the recovery CDs to ensure the drive has not been deemed unrecognisable from DBAN. It still is recognised, both in the BIOS and by the recovery software, but my XP CD doesn't even see it. What I was thinking of was slipstreaming SP2 into my CD. So I need to know two things:
1. Would doing that make any difference?
2. How do I go about slipstreaming SP2 onto my CD?
(*Get some free giggles out of M$'s definitions for a "system" and "boot" partition. Hint: the partition that is used to boot your machine is NOT called "boot", and the partition that holds your operating system is NOT called "system". http://support.microsoft.com/kb/314470)
View 4 Replies View RelatedTrying to use the system recover cd.to try and repair windows xp pro. I get to the part where the screen is supposed to offer repair.My screen comes up showing partitions on the drive.It also says unknown disk but it lists the c: drive with 76246 MB and two other partitions.It just gives me the option to setup windows xp on the selected item or to select a different partition or delete a partition.I'm not getting the screen shown in the sticky.When i hit enter on the large partition it warned about installing two Operating System on the drive.Afraid to go farther,hoping I can save the files on the hard drive.
View 6 Replies View RelatedI recently recieved my new seagate 160 gig HDD to replace my old one. According to the instruction manual, any versions of XP prior to sp1 and 2 will detect the drive as 137gig instead of 160. The install disk I have, however, is for XP without sp1. What would be the best approach? The software included with the drive gives you the option to transfer the boot info to the new drive (but i doubt that installs windows), and to format it to 137gig and later "expand the partition".
View 10 Replies View RelatedSo I had a failed boot with following message: "Windows XP could not start Additional message said to fix with recovery console from XP installation disk.I did that and Recovery fails because hard drive not detected. I went into bios configuration and no listing of primary ide enabled. What should I do? I checked all the connections and everything is connected. How can I bring my hard drive on line for a recovery?
View 6 Replies View RelatedAll of a sudden my PC isn't finding a removable drive when i plug my camera into the USB port. I'm trying to copy pics from my digital camera and have always used the removable drive function in My Computer...now it's not working. other USB hardware (keyboard, mouse etc) are working fine. I've changed the cable, installed the camera driver disk, tried finding new hardware, and tried different USB ports to no avail.Camera is an Episilom 1.3 digital dreams and is working fine. Running Win XP SP2 on AMD Semprom 2800+ 2 GHz processor. Mobo is ASRock K7Upgrade-600
View 13 Replies View RelatedI have just bought and installed (to the point of completing initialization under Disk Management) a new 1 TB hard drive. Originally, I was planning to use it solely for data storage.However, I am thinking of installing Windows XP Pro and all the programs I currently use on it, thereby making it the new OS and programs drive, while using the original 120 GB HD as a data/backup drive.I think the main appeal of doing this, for me, is that it also presents an opportunity to reinstall Windows on a machine which hasn't had this done for more than three years, and which currently seems to take at least five minutes to boot to a "usable" state, despite having a reasonably high spec for its age (it was bought in 2001, but as a result of the upgrade
View 10 Replies View RelatedI used Regseeker *sigh* and now my slave drive is not detected. It does not show up in the device manager list. What may I have removed to cause this? I think Regseeker backed up the registry files I deleted. I tried to restore the files and received an error...
If any more details are needed let me know.
When I try installing Windows XP Pro on the hard drive I can't seem to get the hard drive detected. I actually get to see it in windows XP and as well as in the BIOS, but when it gets to the installaton, It just won't see it. So my mother board is an Asus K8V SE Deluxe and my hard drive is a Western Digital Serial ATA drive 10000 RPM model number: WD360.
I tried the windows xp pro titanium 1.0 with service pack 2. Still couldn't detect it. I also tried many drivers from the internet, all of them were boot disks. That din't work either. I actually never checked the jumpers, I know there is no slave/master... on the drive but where is it suposed to be placed by default? Also I have 2 other IDE hard drives, but formatted in NTFS and my Raptor one is in Fat32, does it have anything to do with it? One also has Windows XP on it.
When I attempted to start my computer, which is running Windows XP Professional Edition, this morning, I received an error message saying
Invalid Boot.ini
Windows could not start because the following file is missing or corrupt:
WindowsSystem32Hal.dll
I researched this issue in the Microsoft Knowledge Base, which said to boot from the Windows XP CD-ROM and use the Recovery Console to perform the repairs. However, when I did, it said that Windows could not detect any hard drives and could not continue.
When I attempted to start my computer, which is running Windows XP
Professional Edition, this morning, I received an error message saying Invalid Boot.iniWindows could not start because the following file is missing or corrupt:
WindowsSystem32Hal.dllI researched this issue in the Microsoft Knowledge Base, which said to boot from the Windows XP CD-ROM and use the Recovery Console to perform the repairs. However, when I did, it said that Windows could not detect any hard drives and could not continue.
not being computer literate , i am having a problem with a new hard drive . i took out the old one . i have the windows disc and product codes , but i can't get it to boot to start the windows installation. i have done it on another computer , and the disc begins installing windows on start up. i have tried starting the computer with the disc in place , and without it . obviously , i must be missing something to get it started . the disc is brand new .
View 8 Replies View RelatedI recently installed Xilinx ISE 6.3i (a software to program digital design circuits)After the installation I found out that every time I plug in my USB Flash Drive, the system does not recognize it. I spotted the reason was this program. In one of the step of installation, this option appears:"Platform Cable USB Driver (IMPORTANT: OS support info bellow)The Platform Cable USB utilizes driver technology that requires Win2000 SP4 or greater or WinXP SP1 or greater. You may install this driver now if you do not have the proper version, but the cable will not work properly until you upgrade your OS version."
View 3 Replies View RelatedI need to install Windows XP on a laptop (Dell Latitude CPx H500GT) but I don't have the CD modular drive for it.How do I install XP with no built-in CD-ROM drive? The only other options I have is a ethernet PC card, one USB port and I do have a USB enclosure (for use with 3.5 hard drives or 5.25 cd/dvd drives)
View 8 Replies View RelatedI turned the PC off to reboot when I though I was going into safe mode and went into regular mode instead. Now, it thinks one of my external drives is the C drive. On boot, I am getting a message that it cannot recognize find the system 32 windows config file (I'm paraphrasing).
I used the repair utility to get to the C prompt (which is pointed at the external drive) and checked the drive letters. I don't think the PC bios knows the hard drive is there.
I tried going into setup and reverting to factory installed configuration and that didn't change anything. I could not get it to recognize the hard drive.
I have just reinstalled XP Pro. I have a SATA hard drive and have to install drivers during install. I didn't install the drivers this time assuming they would still be in the system. Ever since XP thinks the hard drive is a removable drive. I tried reinstalling again but nothing.
View 3 Replies View RelatedJust want to upgrade from an 80 gig hard drive to something in the 250-500 gig range, and I would like to clone my existing drive with operating system directly to the new drive. Is it possible with freeware? I'll then format the old drive and use it as the slave.
View 8 Replies View Relatedmy computer supplier has gone bust, ceased trading and is out of business. My Windows XP Pro is an OEM version. Is there anything I can do short of purchasing XP Pro again? I have just whacked in a new hard drive to the 'pooter. It seems far superior in many respects to the ones that came with the computer in the
first place. What I'd like to do is use tthe new drive as Windows disk C.
way for me to install XP from an external DVD - USB drive I have no internal CD-ROM and need to get XP onto this machine somehow.
View 6 Replies View RelatedI am buying a new PC and was wodering what I have to do to install my existing hard drive in to my new computer. I was told the new install of XP will have problems with the old hard drive.
View 3 Replies View RelatedI have a Dell Dimension 2400 desktop computer that I want to install a 2nd hdd. My sister gave me her computer (which is the same exact as mine). Her's was hit by lightening, she thinks. The motherboard was fried. I'm wanting to use her 40gb hd as a 2nd hdd in my computer.My question is: Will I have to do a clean install on her hdd? I don't want to do anything that would damage my good drive.If I install her drive in my computer and make it a slave in the bios, will that be all I have to do?
View 8 Replies View RelatedI've been using imaging software for more years than I care to remember, with Windows and a couple of other vital programs (and those rotten Google programs that don't give you the option) on drive C and everything else is installed onto another partition - not automatically, I do a custom install and change the installation directory. I have 2 questions.
I've been restoring, updating and making a new working image every Sunday for over a year and it's time for a format and new install, partly because the image is getting too big. My OEM XP Pro CD is SP2 which obviously will go onto drive C. I've downloaded SP3 and dotnetfx35 - will I come across any problems if I install them onto drive D? Seems logical that I won't, but what is logical when it comes to Microsoft? If this is possible, it seems reasonable that I can move all of those update files held in the Windows directory to the same location where I install the two big files, which should cut down on a lot of space on drive C over time...............
I been haveing trouble installing xp pro on my hard drive. I am able to get through the windows install, computer reboots then starts the process all over again starting from the blue screen.I've tried setting the cdrom as the first bootable drive but this does not do the trick.my pins are correct on my 160 gig drive. I don't know what else to do.
View 19 Replies View Related