Any Versions Prior To Sp1 And 2 Detect The Drive As 137gig Instead Of 160
Feb 9, 2005
I recently recieved my new seagate 160 gig HDD to replace my old one. According to the instruction manual, any versions of XP prior to sp1 and 2 will detect the drive as 137gig instead of 160. The install disk I have, however, is for XP without sp1. What would be the best approach? The software included with the drive gives you the option to transfer the boot info to the new drive (but i doubt that installs windows), and to format it to 137gig and later "expand the partition".
View 10 Replies
ADVERTISEMENT
Oct 9, 2010
i am having problems with installing usb drive as it shows up in disk management but my computer won`t detect it anyone have any ideas how i can solve the problem i have a gigabyte ga-g31m-es2l motherboard,i am running windows xp 64 bit
View 1 Replies
View Related
Jul 28, 2005
Before I start, I should tell you all that I am re-posting this with all of the original correspondence at the end.I've done as described, put both drives back into their proper place on the tape and into the proper order (DVD-RW - master, DVD-ROM - slave). On a hunch, I decided to pop in a DVD-R disc, and this was detected just fine. I also put in a DVD-RW disc, but it was not detected. Seeing as how I have data I want to append to an old DVD-RW disc, is there anything left to do?
View 12 Replies
View Related
Jun 29, 2005
In device manager under IDE ATA/ATAPI controllers -> Primary Controller for Device 0 under advanced settings the transfer mode is set to: DMA if avaliable, the Current Mode is: PIO Mode.The hard drive is a 80G western Digital i think the WD800JD which is on its own ide cable connected to the primary connector on the motherboard. I am using windows XP Professional and the PCCHIPS MB. Also, when i start up my computer and it detects the devices for the hard drive it says its in Ultra DMA Mode 4 or 5, but in windows it isnt.
View 9 Replies
View Related
Sep 30, 2006
I wanted to burn a CD and so I put the CD into the computer and opened up windows media but it can't detect the disk or the drive. I went to another burner and the same thing occured except this time I got a message saying the following: "There are no compatible CD drives reported."I then exited and popped in a disk for a game.. I hear the drive accept the disk and it sounds like it is about to load but nothing happens. Its like the cd drive is non functional. My question is what might have happened and can I fix this/ how?
View 13 Replies
View Related
Sep 19, 2005
I have a pc with 2 hardrives that has been working for quite a while now. One drive is IDE and another is a
sata drive. the sata drive has a partition in which windows xp is installed on. Now its time to format this computer and give it a fresh new start, but then I start the windows set-up from the boot disc it doesnt detect the sata drive.
View 6 Replies
View Related
Oct 6, 2007
I wanted to do is remove Vista from it and reinstall XP. I have already run DBAN (Darik's Boot and Nuke) to wipe the drive, but WinXP does not detect the drive. I have Windows XP Pro SP1. Now, I have tried the recovery CDs to ensure the drive has not been deemed unrecognisable from DBAN. It still is recognised, both in the BIOS and by the recovery software, but my XP CD doesn't even see it. What I was thinking of was slipstreaming SP2 into my CD. So I need to know two things:
1. Would doing that make any difference?
2. How do I go about slipstreaming SP2 onto my CD?
View 8 Replies
View Related
Nov 27, 2008
So I had a failed boot with following message: "Windows XP could not start Additional message said to fix with recovery console from XP installation disk.I did that and Recovery fails because hard drive not detected. I went into bios configuration and no listing of primary ide enabled. What should I do? I checked all the connections and everything is connected. How can I bring my hard drive on line for a recovery?
View 6 Replies
View Related
Dec 12, 2005
All of a sudden my PC isn't finding a removable drive when i plug my camera into the USB port. I'm trying to copy pics from my digital camera and have always used the removable drive function in My Computer...now it's not working. other USB hardware (keyboard, mouse etc) are working fine. I've changed the cable, installed the camera driver disk, tried finding new hardware, and tried different USB ports to no avail.Camera is an Episilom 1.3 digital dreams and is working fine. Running Win XP SP2 on AMD Semprom 2800+ 2 GHz processor. Mobo is ASRock K7Upgrade-600
View 13 Replies
View Related
Jul 7, 2008
I used Regseeker *sigh* and now my slave drive is not detected. It does not show up in the device manager list. What may I have removed to cause this? I think Regseeker backed up the registry files I deleted. I tried to restore the files and received an error...
If any more details are needed let me know.
View 1 Replies
View Related
Dec 19, 2004
When I try installing Windows XP Pro on the hard drive I can't seem to get the hard drive detected. I actually get to see it in windows XP and as well as in the BIOS, but when it gets to the installaton, It just won't see it. So my mother board is an Asus K8V SE Deluxe and my hard drive is a Western Digital Serial ATA drive 10000 RPM model number: WD360.
I tried the windows xp pro titanium 1.0 with service pack 2. Still couldn't detect it. I also tried many drivers from the internet, all of them were boot disks. That din't work either. I actually never checked the jumpers, I know there is no slave/master... on the drive but where is it suposed to be placed by default? Also I have 2 other IDE hard drives, but formatted in NTFS and my Raptor one is in Fat32, does it have anything to do with it? One also has Windows XP on it.
View 1 Replies
View Related
Sep 2, 2005
When I attempted to start my computer, which is running Windows XP Professional Edition, this morning, I received an error message saying
Invalid Boot.ini
Windows could not start because the following file is missing or corrupt:
WindowsSystem32Hal.dll
I researched this issue in the Microsoft Knowledge Base, which said to boot from the Windows XP CD-ROM and use the Recovery Console to perform the repairs. However, when I did, it said that Windows could not detect any hard drives and could not continue.
View 14 Replies
View Related
Sep 24, 2007
When trying to install Win XP SP2 there was always a message telling me that it coudn't detect the HDD (Checked Bios, it is detecting everything: Processor, Ram, DVD units and HDD) Well, after several times trying, i decided to put the HDD on my nephew's computer and install Win XP w/o the drivers. Back to my system, connected the HDD and turn it on, but when the XP logo appears, the system reboots, and it happened every time i tried it.
Having a copy of Vista (30 days sample) i decided to install it, and it was installed w/o problems, everything was perfect.So (at last) my cuestion is ...Can i install Win XP on this system? or,there is a feature on P35 that only accept Vista?, orthere is something that i forgot to do? I want XP and not Vista (I will need to buy Vista and I dont have $$$, yet)
View 10 Replies
View Related
Sep 2, 2005
When I attempted to start my computer, which is running Windows XP
Professional Edition, this morning, I received an error message saying Invalid Boot.iniWindows could not start because the following file is missing or corrupt:
WindowsSystem32Hal.dllI researched this issue in the Microsoft Knowledge Base, which said to boot from the Windows XP CD-ROM and use the Recovery Console to perform the repairs. However, when I did, it said that Windows could not detect any hard drives and could not continue.
View 6 Replies
View Related
Sep 24, 2005
I recently installed Xilinx ISE 6.3i (a software to program digital design circuits)After the installation I found out that every time I plug in my USB Flash Drive, the system does not recognize it. I spotted the reason was this program. In one of the step of installation, this option appears:"Platform Cable USB Driver (IMPORTANT: OS support info bellow)The Platform Cable USB utilizes driver technology that requires Win2000 SP4 or greater or WinXP SP1 or greater. You may install this driver now if you do not have the proper version, but the cable will not work properly until you upgrade your OS version."
View 3 Replies
View Related
Apr 9, 2005
I just loaded windows XP disk and was trying to follow directions from a website and I am so afraid to hit the wrong button! I am at the very beginning, screen says: The following list shows the existing partitions and unpartioned space on this computer, use arrows to select item in list: There is only one C: (HP Pavillion (FAT 32)I thought I should just delete that, and start over, but when I said delete it said it would maybe remove things I would need.....
View 11 Replies
View Related
Dec 19, 2007
Hello Friends,I have problem regarding my hard disk!I have 2 hard disk's. 160gb segate barracuda (SATA) & 80gb segate barracuda (SATA).I was having windows vista. My computer was running smoothly that time with 2 hard disk's.I formatted my PC and installed windows xp.While installing windows xp i didn't connect my 80Gb hard disk.But after installation, when i tried to connect it , my computer started hanging.160Gb is my primary hdd and 80gb is secondary hard disk.I never had any OS on 80Gb. My computer hangs at windows xp boot screen.I tried at my friend's place also... tried all jumper settings also but no use. What could be the problem?
View 7 Replies
View Related
Aug 28, 2005
I have a large hard disk and a card reader and 2 DVD Writers, It is terrible to use disk mangement tools to create logical drives, format them, rename them and re-assign the drive letters for all the drives.Is there any simple way to create partitions and format them prior to the installation of XP? Just like the old Win98, I can create and format as many as I like.
View 7 Replies
View Related
Jul 6, 2005
If someone downloads and runs a trojan and then uses system restore to back
to a system restore point prior to running the virus, is that computer still
infected?Nocturnal http://www.spywaretalk.org
View 2 Replies
View Related
Jan 12, 2005
I've tried unsuccessfully to restore my windows xp to a prior date, following the tutorial, with the response: "your system was unable to be restored to the prior date."
View 7 Replies
View Related
Sep 21, 2008
I work at a computer repair shop and am trying to find an easy way to do something that normally takes me a long time.I want to take in a customers somputer who has multiple user accounts, backup those accounts without backing up the entire registry (entire registry backup would in effect "backup" most problems i am fiing), then do a "destructive recovery (totally reinstalling their OS, and then somehow restore all of their old user accounts and the associated settings, my documents folders, etc.NTbackup will allow me to backup all accounts to an eternal HDD but it wont restore them if they are not on the newly installed OS.
View 6 Replies
View Related
Dec 7, 2008
I want to my WinXP laptop (a Thinkpad T41, WinXP SP2) to execute a task/script/job when it receives a suspend/hibernate request from me before it completes said suspend hibernate. It's basically a "do this before you suspend" procedure Specifically, I want to shut off my jabber connection to a server without having to do this manually.
View 1 Replies
View Related
Mar 20, 2006
When booting up, I'm presented with a timed screen with two options : Windows XP home edition build 2600; and Windows XP home edition build 2600? I have a feeling that this has occured from having to re-install XP due to a mysterious file becoming corrupted (HAL.dll in SYSTEM32 folder).
View 14 Replies
View Related
Dec 11, 2005
I have been a user of XP Home SP2 for a number of years, and I have a legitimate OEM install of that on my machine right now. I want to purchase XP Pro SP2, but there are a lot of versions available. The cheaper side of things have 'OEM XP Pro SP2 Upgrade' in the range of $60-$80.Then there are Upgrade versions which do not mention OEM.And finally, there are Full Versions at the most expensive level.To make it more confusing, there are vendors which have listed "OEM XP Pro SP2 Full Version Upgrade"
View 4 Replies
View Related
Sep 5, 2005
well let me start, te last version of windows i baught was 98SE since that date i stoped buying software from microsoft as i felt i don't get what i am paying for, and after almost 6 years useing unofficial versions of microsoft i said ok it is time to give it a try again, i baught a new notebook which comes with Russian xp and i say it is ok i can call and ask to get it in English as i understood i paied for that windows too, so i called Microsoft office and told them the story and all i get was (sorry we can not help you) so i told the lady who answered me this means that i should go to any market and get a $3.00 version of windows xp and i am realy sorry to say the answer was yes.so now i think microsoft should not be so unhappy about how many people use unofficial versions of there os, as it is our right to get it in any lang we want chinese. indian, Russian english as long as we pay
View 20 Replies
View Related
Jul 19, 2008
I'd like to know if it's possible to install both 32- and 64-bit versions of XP on the same disk, separate partitions. Which of them should I install first if I were to choose to do so? And, about how much space should I make for the Windows installments? I'm planning to install and store every other possible thing to a 3rd or 4th partition. How much programs/drivers/ other random stuff will I have to install to the same partition as the XP installment(s)? If I install for example a game while working on the other XP, how can I have it marked/merged into the other XP's registry?
View 4 Replies
View Related
Nov 7, 2007
Why do some versions of Windows XP Home edition cost ~£60, when others cost ~£170?
View 4 Replies
View Related
Feb 22, 2006
I have a .mov on my system that will play on a Mac, but not on a PC. I've tried it on various Windows machines, various Quicktime versions, and I have tons of codecs. The error I get when trying to open it in quicktime is "Error - 2048: the file is not a movie file" Trying to open it in Media Player Classic tells me it cannot render it. I also cannot convert it to another format. VirtualDub, among other converters, won't pick it up. I can't tell you the Mac version is plays on, but I am confident it is at least a year or two old.
View 1 Replies
View Related
Jul 14, 2006
I have a question regarding downloading trial versions of software. Once the trial period is over, does it automatically cancel or do I have to cancel it somehow in order to not pay the purchase price?
View 4 Replies
View Related
Dec 3, 2008
I am curious to the whole 4 Gig issue with 32 bit versions of Windows XP. I understand that 64-bit versions of XP/Vista support more than 4 Gigs, while 32-bit versions only support like 3.5Gigs (recognizable, while the rest is used by the kernel). My issue is, I currently purchased a new system and am trying to figure out which Windows OS would be the best for me. This new system will have 4 Gig's or RAM along with a 64-bit processor, so I guess the question I'm asking is should I get a 64-bit version of XP Pro or look into Vista.
This new system is a gaming machine. Currently I am on Windows XP Media Center Edition 2005 32-bit and I love it, but since that will not suffice for the new hardware I'm looking for recommendations. Whatever I can get closest to on those terms would probably get best for me.
View 14 Replies
View Related
Apr 12, 2006
In setting up my first home network, I decided to update to XP. My new computer had SP Home preinstalled and I bought and installed XP Pro SP2 on my older computer. I lost my way somehow in installing XP Pro on my older computer and in frustration tried to overwrite the first install with a new one. Unfortuantely, that didn't work and resulted in two versions of XP being active.On boot-up I was presented with a choice of "Windows XP Professional" or "Windows XP Professional". Despite the identical nomenclature, the first one in the boot sequence was my original attempt at XP and the second in the sequence was my second XP installation with which I had hoped to overwrite the first I decided to go into the Documents and Settings section (and anywhere else that seemed logical) of XP and delete any references that I could find to the first installation of XP.
View 6 Replies
View Related
