Reinstallation - Use DBAN - Does Not Detect Drive
Oct 6, 2007
I wanted to do is remove Vista from it and reinstall XP. I have already run DBAN (Darik's Boot and Nuke) to wipe the drive, but WinXP does not detect the drive. I have Windows XP Pro SP1. Now, I have tried the recovery CDs to ensure the drive has not been deemed unrecognisable from DBAN. It still is recognised, both in the BIOS and by the recovery software, but my XP CD doesn't even see it. What I was thinking of was slipstreaming SP2 into my CD. So I need to know two things:
1. Would doing that make any difference?
2. How do I go about slipstreaming SP2 onto my CD?
View 8 Replies
ADVERTISEMENT
Oct 9, 2010
i am having problems with installing usb drive as it shows up in disk management but my computer won`t detect it anyone have any ideas how i can solve the problem i have a gigabyte ga-g31m-es2l motherboard,i am running windows xp 64 bit
View 1 Replies
View Related
Jul 28, 2005
Before I start, I should tell you all that I am re-posting this with all of the original correspondence at the end.I've done as described, put both drives back into their proper place on the tape and into the proper order (DVD-RW - master, DVD-ROM - slave). On a hunch, I decided to pop in a DVD-R disc, and this was detected just fine. I also put in a DVD-RW disc, but it was not detected. Seeing as how I have data I want to append to an old DVD-RW disc, is there anything left to do?
View 12 Replies
View Related
Jun 29, 2005
In device manager under IDE ATA/ATAPI controllers -> Primary Controller for Device 0 under advanced settings the transfer mode is set to: DMA if avaliable, the Current Mode is: PIO Mode.The hard drive is a 80G western Digital i think the WD800JD which is on its own ide cable connected to the primary connector on the motherboard. I am using windows XP Professional and the PCCHIPS MB. Also, when i start up my computer and it detects the devices for the hard drive it says its in Ultra DMA Mode 4 or 5, but in windows it isnt.
View 9 Replies
View Related
Sep 30, 2006
I wanted to burn a CD and so I put the CD into the computer and opened up windows media but it can't detect the disk or the drive. I went to another burner and the same thing occured except this time I got a message saying the following: "There are no compatible CD drives reported."I then exited and popped in a disk for a game.. I hear the drive accept the disk and it sounds like it is about to load but nothing happens. Its like the cd drive is non functional. My question is what might have happened and can I fix this/ how?
View 13 Replies
View Related
Sep 19, 2005
I have a pc with 2 hardrives that has been working for quite a while now. One drive is IDE and another is a
sata drive. the sata drive has a partition in which windows xp is installed on. Now its time to format this computer and give it a fresh new start, but then I start the windows set-up from the boot disc it doesnt detect the sata drive.
View 6 Replies
View Related
Feb 9, 2005
I recently recieved my new seagate 160 gig HDD to replace my old one. According to the instruction manual, any versions of XP prior to sp1 and 2 will detect the drive as 137gig instead of 160. The install disk I have, however, is for XP without sp1. What would be the best approach? The software included with the drive gives you the option to transfer the boot info to the new drive (but i doubt that installs windows), and to format it to 137gig and later "expand the partition".
View 10 Replies
View Related
Nov 27, 2008
So I had a failed boot with following message: "Windows XP could not start Additional message said to fix with recovery console from XP installation disk.I did that and Recovery fails because hard drive not detected. I went into bios configuration and no listing of primary ide enabled. What should I do? I checked all the connections and everything is connected. How can I bring my hard drive on line for a recovery?
View 6 Replies
View Related
Dec 12, 2005
All of a sudden my PC isn't finding a removable drive when i plug my camera into the USB port. I'm trying to copy pics from my digital camera and have always used the removable drive function in My Computer...now it's not working. other USB hardware (keyboard, mouse etc) are working fine. I've changed the cable, installed the camera driver disk, tried finding new hardware, and tried different USB ports to no avail.Camera is an Episilom 1.3 digital dreams and is working fine. Running Win XP SP2 on AMD Semprom 2800+ 2 GHz processor. Mobo is ASRock K7Upgrade-600
View 13 Replies
View Related
Jul 7, 2008
I used Regseeker *sigh* and now my slave drive is not detected. It does not show up in the device manager list. What may I have removed to cause this? I think Regseeker backed up the registry files I deleted. I tried to restore the files and received an error...
If any more details are needed let me know.
View 1 Replies
View Related
Dec 19, 2004
When I try installing Windows XP Pro on the hard drive I can't seem to get the hard drive detected. I actually get to see it in windows XP and as well as in the BIOS, but when it gets to the installaton, It just won't see it. So my mother board is an Asus K8V SE Deluxe and my hard drive is a Western Digital Serial ATA drive 10000 RPM model number: WD360.
I tried the windows xp pro titanium 1.0 with service pack 2. Still couldn't detect it. I also tried many drivers from the internet, all of them were boot disks. That din't work either. I actually never checked the jumpers, I know there is no slave/master... on the drive but where is it suposed to be placed by default? Also I have 2 other IDE hard drives, but formatted in NTFS and my Raptor one is in Fat32, does it have anything to do with it? One also has Windows XP on it.
View 1 Replies
View Related
Sep 2, 2005
When I attempted to start my computer, which is running Windows XP Professional Edition, this morning, I received an error message saying
Invalid Boot.ini
Windows could not start because the following file is missing or corrupt:
WindowsSystem32Hal.dll
I researched this issue in the Microsoft Knowledge Base, which said to boot from the Windows XP CD-ROM and use the Recovery Console to perform the repairs. However, when I did, it said that Windows could not detect any hard drives and could not continue.
View 14 Replies
View Related
Sep 24, 2007
When trying to install Win XP SP2 there was always a message telling me that it coudn't detect the HDD (Checked Bios, it is detecting everything: Processor, Ram, DVD units and HDD) Well, after several times trying, i decided to put the HDD on my nephew's computer and install Win XP w/o the drivers. Back to my system, connected the HDD and turn it on, but when the XP logo appears, the system reboots, and it happened every time i tried it.
Having a copy of Vista (30 days sample) i decided to install it, and it was installed w/o problems, everything was perfect.So (at last) my cuestion is ...Can i install Win XP on this system? or,there is a feature on P35 that only accept Vista?, orthere is something that i forgot to do? I want XP and not Vista (I will need to buy Vista and I dont have $$$, yet)
View 10 Replies
View Related
Sep 2, 2005
When I attempted to start my computer, which is running Windows XP
Professional Edition, this morning, I received an error message saying Invalid Boot.iniWindows could not start because the following file is missing or corrupt:
WindowsSystem32Hal.dllI researched this issue in the Microsoft Knowledge Base, which said to boot from the Windows XP CD-ROM and use the Recovery Console to perform the repairs. However, when I did, it said that Windows could not detect any hard drives and could not continue.
View 6 Replies
View Related
Jan 19, 2006
I just completely wiped my HD clean with DBAN. Went to do a clean install, XP HOME, and everything went fine until I checked windows explorer and found out that I have 3 1/2 floppy, removable disk c:, removable disk D:,removable disk E:, DVD-R DRIVE F:, AND local disk G:. I should only have one local disk................... C: Why do I have all these removable disks C:,D:,E:???????And how can I fix this?
View 6 Replies
View Related
Jun 6, 2008
My PC is a bit slow, and it's collected a lot of rubbish since the last time i formatted it, so i wanna format it today since I've got a lot of free time on my hands.I wanted to format it, then i thought about Boot & Nuke. How hard is it to reinstall windows after running DBAN ? what are the procedures to get XP back on my machine?
View 9 Replies
View Related
Sep 24, 2005
I recently installed Xilinx ISE 6.3i (a software to program digital design circuits)After the installation I found out that every time I plug in my USB Flash Drive, the system does not recognize it. I spotted the reason was this program. In one of the step of installation, this option appears:"Platform Cable USB Driver (IMPORTANT: OS support info bellow)The Platform Cable USB utilizes driver technology that requires Win2000 SP4 or greater or WinXP SP1 or greater. You may install this driver now if you do not have the proper version, but the cable will not work properly until you upgrade your OS version."
View 3 Replies
View Related
Dec 19, 2007
Hello Friends,I have problem regarding my hard disk!I have 2 hard disk's. 160gb segate barracuda (SATA) & 80gb segate barracuda (SATA).I was having windows vista. My computer was running smoothly that time with 2 hard disk's.I formatted my PC and installed windows xp.While installing windows xp i didn't connect my 80Gb hard disk.But after installation, when i tried to connect it , my computer started hanging.160Gb is my primary hdd and 80gb is secondary hard disk.I never had any OS on 80Gb. My computer hangs at windows xp boot screen.I tried at my friend's place also... tried all jumper settings also but no use. What could be the problem?
View 7 Replies
View Related
Oct 5, 2008
It's got to the time where I need to do this and I have done it numerous times in the past but this time I am having problems.
Last week bought two new 500gb harddrives and replaced my existing 300gb slave. Formatted and partitioned this and all was okay.
Today I have removed the 300gb master and installed, formatted and partitioned the new 500gb hd with PM8.
I have set the primary partition as active and all the others are logical which is asthe old hd was partitioned.
I have been geting a disk boot failure error on trying to boot from the CDROM with the XP installation disk. Having originaly had the bios set incorrectly I have now rechecked it and ensured the boot order is set to CDROM, HD-0 and the floppy.
I have ensured that the primary hd has been detected, detection is set to to Auto and Access Mode to LBA following the Seagate instructions. I have now also disconnected the secondary drive to exclude that from the picture until I get into the primary drive.
I have also reset the jumper on the new primary to Master having disconnected the secondary drive.
View 9 Replies
View Related
Oct 18, 2010
This problem only occurs with any version of windows XP, Pro/Home/Media, at first, i could never install ie8 through windows update. It wouldnt install properly and sometimes i would have to start the installation over and not do it through windows update and do it manually with the downloadable file. So we learned our way around that no problem and its not a hassle to install it seperatly, but the BIGGEST PAIN IN THE A** we are having now is, when we reinstall widows, either on a new HD, Old, or even on a brand new custom built computer
View 7 Replies
View Related
May 10, 2005
Earlier tonight I switched the hard drives between my computer and my mothers computer, because (ironically) her's was better for gaming. After a quick reinstall of XP Home Edition, my computer was good to go. But setting hers up proved to be a bit more of a challenge.I loaded up the hard drive, booted up with the XP Pro Edition (it's what she uses) and the installation was going great. At about 9 minutes left, I get the error message saying something like: "This software has not passed the Windows Logo Test and will not be installed" or something to that nature. I clicked OK, it popped up again, I clicked OK again. This time, the installation finished up and strangely everything started up. I logged into one of the accounts, only to find that no icons had loaded and everything was going horribly slow. I couldn't right click on the desktop. I couldn't click on the start button. The only thing I was able to do was click on the bar at the bottom, which does me no good at all anyway. Something was using up the computers resources like mad, and strangely the LAN light on the DSL modem was going berserk.
I'm thinking maybe a complete reinstall will do the trick. The only problem is that when trying to do a fresh install on the C: it popped up with a warning message saying "Installing an OS onto a partitioned drive that already contains an OS may result in software not running properly." I backed away from this and re-tried the repair installation. To my dismay, the error came back up again. I'm calling it quits for now and hope to have a reply tomorrow. I really need to get this fixed soon As a side note, I used the 'Repair Installation' choice on my Hard Drive, and everything works right now. For some reason XP Pro is a bit picky. How do I get passed this error to the point where the computer is useable again?
View 14 Replies
View Related
Apr 12, 2007
my system is really slow.I ran many virus scanners, spy/adware destroyers, and programs to clean and fix your registry but they didnt do anything. so i finally just reinstalled XP, i got all the suggested drivers and updated to service pack 2 and got all the windows updates, but its still just as slow.when i run it in safe mode, it works like a charm, just like it used to.
View 2 Replies
View Related
Feb 12, 2006
my dell dimension 2400 got so much spyware on it i could scan for it, but not remove it.
i reinstalled xp and i the computer basically operates the same way. i am lucky to get anything to work with the keys but especially no function with the mouse. windows xp appears to be installed fine. i cannot get to system restore either.
i have my dell laptop hooked to it with but cannot navigate at all in trying to link the two puters together.
i wanted to completely format and reinstall xp but it appears it just copied over and still left me with the problems.
View 3 Replies
View Related
Aug 15, 2009
last time i was to format the hard drive of my hp laptop while files were copied through os cd all of sudden due to power cut the installation had to cancelled,when next time I tried to install the os my laptop screen showed a message "NTLDR IS MISSING..TO RESTART PRESS CTRL+ALT+DELETE" BUT EVEN TRYING TO RESTART IT COULD NOT
View 5 Replies
View Related
May 11, 2007
Someone gave me a laptop that didn't work. It's a HP Pavillion ze 4900.It originally had xp home on it, so I ordered a new disk to install on it. It was saying that some files were not found. It would do nothing. It also has a password on it. I did find out the password from them. I tried doing the repair installation and it didn't work, so I formatted the partition and tried to re-install to it. The problem is that when it finished formatting and then loading the windows files, when it restarts from there I have to put in the password again and it starts all over. I have done this 2x now and still it keeps doing the same thing. I just turned it off and thought
View 8 Replies
View Related
Sep 7, 2007
I have recently had to format my Dell Dimension 2400 desktop due to the fact it was full of viruses
I used an XP home sp2 disc to format and reinstall the operating system no probs, but now the screen resolution won't go above 640x480 pixels, and everything is massive, I'm guessing this is a driver issue
View 2 Replies
View Related
Dec 4, 2008
i have reinstalled xp on my pc today. i chose the option to format the hard drive. everything has finished and i have installed the drivers etc.
View 14 Replies
View Related
Aug 22, 2007
I reinstalled Windows XP Pro and afterwards a folder, with subfolders, is not possible to open or even delete. It contained quite a lot of data and now it says that it contains 0 files.I have tried programs like deleteatboot and unlock, but its still there. I can drag and drop files into the folder but then that file just dissapear and the folder still says 0 files and 0 bytes.I can also move the folder.
View 2 Replies
View Related
Oct 4, 2009
My wife is trying to use my son's laptop which we have just had fixed due to having loads of viruses.The laptop would then not even start up, so I re-installed Windows (XP Home) and everything seemed fine, as it would boot up onto the desktop and have all the icons.No matter how long I leave it (even left for 4hours one day) I cannot load ANYTHING. When I click an icon the hour glass will appear and then thats it. It won't even let me switch it off via Start.She really needs to get on to it for work. But if a re-install won't work. Is there anything that will?
View 3 Replies
View Related
Jul 2, 2008
My windows was not loading properly and so i used windows pro sp2 cd and repaired my current installation. Once that was done when i tried to update it didn't happened and so i went to microsoft.com and downloaded a fix patch and it worked. After that my ca internet security 2008 suite was not loading anymore with windows and so i just unistalled it and reinstalled it and windows started to crash. Now when it crash it gives me multiple of blue screen and nothing till i restart and same thing continues.
View 9 Replies
View Related
Oct 2, 2002
I run on Windows 2000 professional.Intermittently my computer on its own will restart. The only consistency is that I am online using broadband.For a completely different reason I just reinstalled Windows 2000.
View 14 Replies
View Related
