DVD-RW Drive Won't Detect A DVD-RW Disc
Jul 28, 2005
Before I start, I should tell you all that I am re-posting this with all of the original correspondence at the end.I've done as described, put both drives back into their proper place on the tape and into the proper order (DVD-RW - master, DVD-ROM - slave). On a hunch, I decided to pop in a DVD-R disc, and this was detected just fine. I also put in a DVD-RW disc, but it was not detected. Seeing as how I have data I want to append to an old DVD-RW disc, is there anything left to do?
View 12 Replies
ADVERTISEMENT
Oct 9, 2010
i am having problems with installing usb drive as it shows up in disk management but my computer won`t detect it anyone have any ideas how i can solve the problem i have a gigabyte ga-g31m-es2l motherboard,i am running windows xp 64 bit
View 1 Replies
View Related
Mar 27, 2007
Windows XP Home Edition (sp 2) HP Pavillion After I start the computer, I get this message---Red circle with a white x message states There is no disc in the drive. Please insert a disc into drive. This started this morning. Didn't have it last night when I shut it down. Have no idea why this all of a sudden started. Any help would be appreciated. I have tried clicking on cancel
comes right back. Went into Task Manager and clicked End Task.
View 5 Replies
View Related
Jun 29, 2005
In device manager under IDE ATA/ATAPI controllers -> Primary Controller for Device 0 under advanced settings the transfer mode is set to: DMA if avaliable, the Current Mode is: PIO Mode.The hard drive is a 80G western Digital i think the WD800JD which is on its own ide cable connected to the primary connector on the motherboard. I am using windows XP Professional and the PCCHIPS MB. Also, when i start up my computer and it detects the devices for the hard drive it says its in Ultra DMA Mode 4 or 5, but in windows it isnt.
View 9 Replies
View Related
Sep 30, 2006
I wanted to burn a CD and so I put the CD into the computer and opened up windows media but it can't detect the disk or the drive. I went to another burner and the same thing occured except this time I got a message saying the following: "There are no compatible CD drives reported."I then exited and popped in a disk for a game.. I hear the drive accept the disk and it sounds like it is about to load but nothing happens. Its like the cd drive is non functional. My question is what might have happened and can I fix this/ how?
View 13 Replies
View Related
Sep 19, 2005
I have a pc with 2 hardrives that has been working for quite a while now. One drive is IDE and another is a
sata drive. the sata drive has a partition in which windows xp is installed on. Now its time to format this computer and give it a fresh new start, but then I start the windows set-up from the boot disc it doesnt detect the sata drive.
View 6 Replies
View Related
Oct 6, 2007
I wanted to do is remove Vista from it and reinstall XP. I have already run DBAN (Darik's Boot and Nuke) to wipe the drive, but WinXP does not detect the drive. I have Windows XP Pro SP1. Now, I have tried the recovery CDs to ensure the drive has not been deemed unrecognisable from DBAN. It still is recognised, both in the BIOS and by the recovery software, but my XP CD doesn't even see it. What I was thinking of was slipstreaming SP2 into my CD. So I need to know two things:
1. Would doing that make any difference?
2. How do I go about slipstreaming SP2 onto my CD?
View 8 Replies
View Related
Feb 9, 2005
I recently recieved my new seagate 160 gig HDD to replace my old one. According to the instruction manual, any versions of XP prior to sp1 and 2 will detect the drive as 137gig instead of 160. The install disk I have, however, is for XP without sp1. What would be the best approach? The software included with the drive gives you the option to transfer the boot info to the new drive (but i doubt that installs windows), and to format it to 137gig and later "expand the partition".
View 10 Replies
View Related
Nov 27, 2008
So I had a failed boot with following message: "Windows XP could not start Additional message said to fix with recovery console from XP installation disk.I did that and Recovery fails because hard drive not detected. I went into bios configuration and no listing of primary ide enabled. What should I do? I checked all the connections and everything is connected. How can I bring my hard drive on line for a recovery?
View 6 Replies
View Related
Dec 12, 2005
All of a sudden my PC isn't finding a removable drive when i plug my camera into the USB port. I'm trying to copy pics from my digital camera and have always used the removable drive function in My Computer...now it's not working. other USB hardware (keyboard, mouse etc) are working fine. I've changed the cable, installed the camera driver disk, tried finding new hardware, and tried different USB ports to no avail.Camera is an Episilom 1.3 digital dreams and is working fine. Running Win XP SP2 on AMD Semprom 2800+ 2 GHz processor. Mobo is ASRock K7Upgrade-600
View 13 Replies
View Related
Jul 7, 2008
I used Regseeker *sigh* and now my slave drive is not detected. It does not show up in the device manager list. What may I have removed to cause this? I think Regseeker backed up the registry files I deleted. I tried to restore the files and received an error...
If any more details are needed let me know.
View 1 Replies
View Related
Dec 19, 2004
When I try installing Windows XP Pro on the hard drive I can't seem to get the hard drive detected. I actually get to see it in windows XP and as well as in the BIOS, but when it gets to the installaton, It just won't see it. So my mother board is an Asus K8V SE Deluxe and my hard drive is a Western Digital Serial ATA drive 10000 RPM model number: WD360.
I tried the windows xp pro titanium 1.0 with service pack 2. Still couldn't detect it. I also tried many drivers from the internet, all of them were boot disks. That din't work either. I actually never checked the jumpers, I know there is no slave/master... on the drive but where is it suposed to be placed by default? Also I have 2 other IDE hard drives, but formatted in NTFS and my Raptor one is in Fat32, does it have anything to do with it? One also has Windows XP on it.
View 1 Replies
View Related
Sep 2, 2005
When I attempted to start my computer, which is running Windows XP Professional Edition, this morning, I received an error message saying
Invalid Boot.ini
Windows could not start because the following file is missing or corrupt:
WindowsSystem32Hal.dll
I researched this issue in the Microsoft Knowledge Base, which said to boot from the Windows XP CD-ROM and use the Recovery Console to perform the repairs. However, when I did, it said that Windows could not detect any hard drives and could not continue.
View 14 Replies
View Related
Sep 24, 2007
When trying to install Win XP SP2 there was always a message telling me that it coudn't detect the HDD (Checked Bios, it is detecting everything: Processor, Ram, DVD units and HDD) Well, after several times trying, i decided to put the HDD on my nephew's computer and install Win XP w/o the drivers. Back to my system, connected the HDD and turn it on, but when the XP logo appears, the system reboots, and it happened every time i tried it.
Having a copy of Vista (30 days sample) i decided to install it, and it was installed w/o problems, everything was perfect.So (at last) my cuestion is ...Can i install Win XP on this system? or,there is a feature on P35 that only accept Vista?, orthere is something that i forgot to do? I want XP and not Vista (I will need to buy Vista and I dont have $$$, yet)
View 10 Replies
View Related
Sep 2, 2005
When I attempted to start my computer, which is running Windows XP
Professional Edition, this morning, I received an error message saying Invalid Boot.iniWindows could not start because the following file is missing or corrupt:
WindowsSystem32Hal.dllI researched this issue in the Microsoft Knowledge Base, which said to boot from the Windows XP CD-ROM and use the Recovery Console to perform the repairs. However, when I did, it said that Windows could not detect any hard drives and could not continue.
View 6 Replies
View Related
Sep 24, 2005
I recently installed Xilinx ISE 6.3i (a software to program digital design circuits)After the installation I found out that every time I plug in my USB Flash Drive, the system does not recognize it. I spotted the reason was this program. In one of the step of installation, this option appears:"Platform Cable USB Driver (IMPORTANT: OS support info bellow)The Platform Cable USB utilizes driver technology that requires Win2000 SP4 or greater or WinXP SP1 or greater. You may install this driver now if you do not have the proper version, but the cable will not work properly until you upgrade your OS version."
View 3 Replies
View Related
Feb 14, 2007
A while back a friend partitioned my hard drive into three different partitions. the one I use is now almost full and I would like to merge the almost-full partition with the next partition, which is completely empty. Can anyone help me with the steps to do that? Thanks in advance. I have a windows xp system with the big service pak installed also. the pc is a dell dimension 4300 with a 1.6 ghz processor and 513 mb of RAM.
View 5 Replies
View Related
Nov 16, 2004
I was trying to run a computer game off a CD and I got the error "There is no disk in the drive. Please insert a disk into drive E:." The E drive is my CD RW. I had run this program before without a problem. I took the disk out and put it back in- no luck. I gave up.Now I try to run a program that has been installed on my harddrive (Powerpoint), and I get the same error. I never needed to have a disk in the E drive to use that program before. I use Windows XP. Not sure where to look to troubleshoot this one.
View 5 Replies
View Related
Dec 19, 2007
Hello Friends,I have problem regarding my hard disk!I have 2 hard disk's. 160gb segate barracuda (SATA) & 80gb segate barracuda (SATA).I was having windows vista. My computer was running smoothly that time with 2 hard disk's.I formatted my PC and installed windows xp.While installing windows xp i didn't connect my 80Gb hard disk.But after installation, when i tried to connect it , my computer started hanging.160Gb is my primary hdd and 80gb is secondary hard disk.I never had any OS on 80Gb. My computer hangs at windows xp boot screen.I tried at my friend's place also... tried all jumper settings also but no use. What could be the problem?
View 7 Replies
View Related
Feb 22, 2007
I have just finished a major rescue operation after my motherboard failed. I'm using Windows XP Home. Everything appears to be OK - except, having downloaded Spybot, when I try to run it, I get this message "There is no disc in the drive. Please insert a disc into drive DeviceHarddisk 1DR2". It doesn't matter which of the buttons I then click, nothing happens, and the only way I can get rid of it is to reboot the system. I had the same problem last May, although the context was different. I seem to remember that the only way I could fix the problem was to rename the virtual drive "c:" as "b:". Question - would that work? If so, how do you rename virtual drives, my memory isn't what it was, and I foolishly didn't write the process down.
View 3 Replies
View Related
May 25, 2010
My hp dvd 1140i will not burn my movies it keeps saying that the disc needs formatting.
View 1 Replies
View Related
Feb 16, 2008
I have Windows XP and am using a CDW / DVD R/RW. I have used it in the past to burn CDs. Tonight I am trying to insert a movie disc and no matter which movie I insert, nothing autoplays. In addition, when I click the drive in explorer, it says please insert a disk into drive d. I have tried a number of different movies to no avail.
View 10 Replies
View Related
Aug 14, 2007
I have recently bought a new computer that came with windows vista as you may have guessed the experience mostly has not been a good one, with lots of compatibility issues. I want to dual boot Vista with XP but the problem is I have heard windows XP does not have the SATA drivers on the disc. I understand that you just need to insert a floppy and push F6 I think but the problem is I don't have a floppy drive! Is there anyway I can slipstream the drivers into the install or something?
View 2 Replies
View Related
Jan 17, 2005
want specific instructions on how to reformat a secondary hard drive without having the xp disc. never done this before. used to have son do all my hard drive installation work but he moved far away. i have complete system restore discs for first hard drive but does not recognize my secondary hard drive; found this out when reinstalling/doing complete system recovery on first hard drive. of course i backed up all my important information from both drives. i want to reformat second hard drive due to several reasons. One, i want to start off fresh. Two, there is a lot of junk on there i no longer want or need or use.
View 3 Replies
View Related
Sep 15, 2005
Any possible solutions? where can i go to get a new disc, I have no idea where it went.
View 3 Replies
View Related
Oct 16, 2005
i used my maxblast disc to clean my hard drive now that i try 2 reinstall windows back everything i try fail i changed the bios to boot from cd rom and floppy [i have the 6 disks of xp bootables what do i do now i cant get anything to work
View 4 Replies
View Related
Mar 10, 2010
Further to my message of 03/03/10 I have a Samsung NC10 Netbook, it keeps returning to the reboot options black screen but whatever option I choose, it boots up, flashes Windows XP, flashes blue screen, ends up back on black options screen. There's no chance of getting on the internet to download anything, no icons no task bar. I know that this will cost us �70 to take to PCWorld and we're a bit low paid. How can I transfer the files to another PC?
View 14 Replies
View Related
Jul 16, 2010
super multi drive disc for windows is not being read when put in dvd drive--why--its new one i have just bought from currys
View 1 Replies
View Related
Jul 16, 2008
well this is my first computer i built so i'm a little inexpierianced but here's the problem i powered on my computer and put in the xp disc i boot it up from the disc and so the disc is installing xp it says windows is starting up for about 15 seconds the screen goes black and i get the bsod. it talks about my i get the error code : stop: 0x0000007B (0xF78D2524, 0xC0000034, 0x00000000, 0x00000000) i've found what these mean but not wha
View 2 Replies
View Related
Jul 11, 2005
I have WIN XP PRO SP2 on my system. I have a 120G Harddrive. is it possible to reformst to a dual partition, 50% WIN 98 SE FAT the other half XP NTFS ? I dont have my original XP disk So I dont know if I will be able to reinstall my XP off of my backup disc.
View 1 Replies
View Related
Sep 10, 2005
Running XP Pro with 1 DVD ROM and 1 CDR drive. Whenever I remove media from a drive and replace with a new disc, windows only displays the old data and doesn't recognize the new disc. Especially frustrating during a multi disc install. Sometimes it will refresh if I eject the disc through a menu vs. drive button. Other times this doesn't work. This happens with both drives, so it doesn't seem to be hardware issue.
View 1 Replies
View Related
