Installing Win On P35 Chipset - Couldn't Detect Hard Drive
Sep 24, 2007
When trying to install Win XP SP2 there was always a message telling me that it coudn't detect the HDD (Checked Bios, it is detecting everything: Processor, Ram, DVD units and HDD) Well, after several times trying, i decided to put the HDD on my nephew's computer and install Win XP w/o the drivers. Back to my system, connected the HDD and turn it on, but when the XP logo appears, the system reboots, and it happened every time i tried it.
Having a copy of Vista (30 days sample) i decided to install it, and it was installed w/o problems, everything was perfect.So (at last) my cuestion is ...Can i install Win XP on this system? or,there is a feature on P35 that only accept Vista?, orthere is something that i forgot to do? I want XP and not Vista (I will need to buy Vista and I dont have $$$, yet)
View 10 Replies
ADVERTISEMENT
Oct 9, 2010
i am having problems with installing usb drive as it shows up in disk management but my computer won`t detect it anyone have any ideas how i can solve the problem i have a gigabyte ga-g31m-es2l motherboard,i am running windows xp 64 bit
View 1 Replies
View Related
Jun 29, 2005
In device manager under IDE ATA/ATAPI controllers -> Primary Controller for Device 0 under advanced settings the transfer mode is set to: DMA if avaliable, the Current Mode is: PIO Mode.The hard drive is a 80G western Digital i think the WD800JD which is on its own ide cable connected to the primary connector on the motherboard. I am using windows XP Professional and the PCCHIPS MB. Also, when i start up my computer and it detects the devices for the hard drive it says its in Ultra DMA Mode 4 or 5, but in windows it isnt.
View 9 Replies
View Related
Feb 27, 2005
I have been searching this site for possible threads relating to my problem, but couldn't find it. I apologize if I am redundant. Windows wont boot suddenly. It had worked fine for a long time till now. It shows the Windows XP logo, but wont show the user names to log in. I tried to boot from the windows XP CD, but when it tries to fix problems, a message appears saying that Windows couldn't find a hard drive. I checked my hard drive and its perfectly connected.
View 3 Replies
View Related
Nov 27, 2008
So I had a failed boot with following message: "Windows XP could not start Additional message said to fix with recovery console from XP installation disk.I did that and Recovery fails because hard drive not detected. I went into bios configuration and no listing of primary ide enabled. What should I do? I checked all the connections and everything is connected. How can I bring my hard drive on line for a recovery?
View 6 Replies
View Related
Dec 19, 2004
When I try installing Windows XP Pro on the hard drive I can't seem to get the hard drive detected. I actually get to see it in windows XP and as well as in the BIOS, but when it gets to the installaton, It just won't see it. So my mother board is an Asus K8V SE Deluxe and my hard drive is a Western Digital Serial ATA drive 10000 RPM model number: WD360.
I tried the windows xp pro titanium 1.0 with service pack 2. Still couldn't detect it. I also tried many drivers from the internet, all of them were boot disks. That din't work either. I actually never checked the jumpers, I know there is no slave/master... on the drive but where is it suposed to be placed by default? Also I have 2 other IDE hard drives, but formatted in NTFS and my Raptor one is in Fat32, does it have anything to do with it? One also has Windows XP on it.
View 1 Replies
View Related
Sep 2, 2005
When I attempted to start my computer, which is running Windows XP Professional Edition, this morning, I received an error message saying
Invalid Boot.ini
Windows could not start because the following file is missing or corrupt:
WindowsSystem32Hal.dll
I researched this issue in the Microsoft Knowledge Base, which said to boot from the Windows XP CD-ROM and use the Recovery Console to perform the repairs. However, when I did, it said that Windows could not detect any hard drives and could not continue.
View 14 Replies
View Related
Sep 2, 2005
When I attempted to start my computer, which is running Windows XP
Professional Edition, this morning, I received an error message saying Invalid Boot.iniWindows could not start because the following file is missing or corrupt:
WindowsSystem32Hal.dllI researched this issue in the Microsoft Knowledge Base, which said to boot from the Windows XP CD-ROM and use the Recovery Console to perform the repairs. However, when I did, it said that Windows could not detect any hard drives and could not continue.
View 6 Replies
View Related
Dec 19, 2007
Hello Friends,I have problem regarding my hard disk!I have 2 hard disk's. 160gb segate barracuda (SATA) & 80gb segate barracuda (SATA).I was having windows vista. My computer was running smoothly that time with 2 hard disk's.I formatted my PC and installed windows xp.While installing windows xp i didn't connect my 80Gb hard disk.But after installation, when i tried to connect it , my computer started hanging.160Gb is my primary hdd and 80gb is secondary hard disk.I never had any OS on 80Gb. My computer hangs at windows xp boot screen.I tried at my friend's place also... tried all jumper settings also but no use. What could be the problem?
View 7 Replies
View Related
Nov 22, 2009
I have just bought and installed (to the point of completing initialization under Disk Management) a new 1 TB hard drive. Originally, I was planning to use it solely for data storage.However, I am thinking of installing Windows XP Pro and all the programs I currently use on it, thereby making it the new OS and programs drive, while using the original 120 GB HD as a data/backup drive.I think the main appeal of doing this, for me, is that it also presents an opportunity to reinstall Windows on a machine which hasn't had this done for more than three years, and which currently seems to take at least five minutes to boot to a "usable" state, despite having a reasonably high spec for its age (it was bought in 2001, but as a result of the upgrade
View 10 Replies
View Related
Feb 3, 2008
not being computer literate , i am having a problem with a new hard drive . i took out the old one . i have the windows disc and product codes , but i can't get it to boot to start the windows installation. i have done it on another computer , and the disc begins installing windows on start up. i have tried starting the computer with the disc in place , and without it . obviously , i must be missing something to get it started . the disc is brand new .
View 8 Replies
View Related
Sep 11, 2005
I am buying a new PC and was wodering what I have to do to install my existing hard drive in to my new computer. I was told the new install of XP will have problems with the old hard drive.
View 3 Replies
View Related
Dec 21, 2008
I have a Dell Dimension 2400 desktop computer that I want to install a 2nd hdd. My sister gave me her computer (which is the same exact as mine). Her's was hit by lightening, she thinks. The motherboard was fried. I'm wanting to use her 40gb hd as a 2nd hdd in my computer.My question is: Will I have to do a clean install on her hdd? I don't want to do anything that would damage my good drive.If I install her drive in my computer and make it a slave in the bios, will that be all I have to do?
View 8 Replies
View Related
Jul 18, 2005
I been haveing trouble installing xp pro on my hard drive. I am able to get through the windows install, computer reboots then starts the process all over again starting from the blue screen.I've tried setting the cdrom as the first bootable drive but this does not do the trick.my pins are correct on my 160 gig drive. I don't know what else to do.
View 19 Replies
View Related
Aug 3, 2007
basically I need to know how to make a pc boot from the HD and install XP by copying the XP CD to the HD. Details & reason below:I've formatted the hard drive on a a friends emachine (by putting the HD into my machine) due to mess with viruses etc.Put HD back into e machine and tried to install XP from an OEM XP CD (genuine windows) - it boots and starts install, copying files to the hard drive fine but when it reboots it doesn't continue the install, but just goes back to the start, wanting to copy the files again.So what I'm going to do is put the HD back in my machine, copy the XP CD to a partition on the HD and then put it back in the machine, boot from HD and install XP all from HD. Question is- how do I get it to boot from the hard drive and start the install?I don't have a floppy boot disk or a floppy drive on my machine to make floppy boot disk. I can set the machine to boot from the HD 1st, that's no problem, just don't know how to set up the HD to let it boot from that so I can run the windows install which will be on the partition on the HD.
View 1 Replies
View Related
May 5, 2006
before I install the new hard drive making this new drive the boot drive which will be replacing my existing "C" drive how I by to do this, my system is Compaq Presario with Windows XP Home Edition and has Drive "C" with 20GB, Drive "D" (which is the SYSTEM SAVE DRIVE) with 18GB, Slave Drive "G" with 98GB and I made a partition on this drive which is Drive "H" with 15GB, the new drive that I want to install is a Seagate with 120 GB.
View 14 Replies
View Related
Dec 22, 2007
My error is BSOD "Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated."it tells me to run chkdsk /f, but then I try that switch and it tells me that it is an invalid switch.
View 14 Replies
View Related
Jan 10, 2006
A few days ago my hard drive crapped the bed so I bought a new one. I was wondering if I should do something different than what I was gonna do. I have the original Dell Windows XP SP1 cd that came with my Dell computer. I am going to install it on my new hard drive. After I do this should I go to www.microsoft.com and download the SP2 or should I do something different altogether? I just wanna make sure I have all the windows security updates on the new hard drive.
View 9 Replies
View Related
Jul 12, 2005
What must be done to a new hard drive and which files must be on the Hard drive before Win XP can be installed?
View 5 Replies
View Related
Feb 23, 2006
Hi Folks, I have a Dell Optiplex GX240 running Windows XP Pro with 512MB memory. I currently have a 40GB hard drive in there. I want to know if it can handle a 250GB hard drive. Any help will be greatly appreciated. I'm considering the Western Digital Hard Drive.
View 12 Replies
View Related
Jun 30, 2009
I had to install a new hard drive on my laptop. It has windows xp. That installed ok and now I can't get my wireless to work. It says "No active network adapters". It is not plugged into the ethernet, my home computer is. I usually just get on my laptop in another room with the wireless that is built into the computer.
View 1 Replies
View Related
Dec 14, 2008
My Maxtor External Drive became corrupted and I needed to re-format the drive. Unfortunately, while Working in Windows XP I accidentally deleted the partition and the drive. Now I can't get Windows XP to recognize the Maxtor Drive. I tried re-booting the PC and plugging in the Maxtor USB Cable, but this did not work. The Maxtor Drive was my H: Drive. Can get Windows to recognize my Maxtor Drive? When I deleted the drive I was working in the "Computer Management" Screen. I navigated to this screen through the following path: Control Panel/Administrative Tools/Computer Management.
View 2 Replies
View Related
Jul 16, 2008
well this is my first computer i built so i'm a little inexpierianced but here's the problem i powered on my computer and put in the xp disc i boot it up from the disc and so the disc is installing xp it says windows is starting up for about 15 seconds the screen goes black and i get the bsod. it talks about my i get the error code : stop: 0x0000007B (0xF78D2524, 0xC0000034, 0x00000000, 0x00000000) i've found what these mean but not wha
View 2 Replies
View Related
Aug 13, 2005
I need to do an XP repair install on my Dell Dimension 8400 to fix several programs that no longer work (Update being the biggest problem). I had used this Forum a couple of months ago and doing the repair install was the recommended solution. I have a copy of the michaelstevenstech.com directions so I know what to do. Unfortunately, when I try to launch the "to setup Windows XP, press enter" step, the program comes back with an error message saying the hard drive is not found.
View 14 Replies
View Related
Nov 7, 2007
i am thinking about upgrading from my dell precision 420 to a new barebones kit from tigerdirect (barebone kit : Click here. ) And i wanted to buy that, get the fan, and just switch the graphics card and my hard drives. But, i was talking to a friend and he said i couldn't switch the hard drives cause it could cause problems with windows.... so my question is... can i use my hard drives from my dell precision (they are not stock hard drives), and just throw them in to my new barebones kit?
View 12 Replies
View Related
Jul 28, 2005
Before I start, I should tell you all that I am re-posting this with all of the original correspondence at the end.I've done as described, put both drives back into their proper place on the tape and into the proper order (DVD-RW - master, DVD-ROM - slave). On a hunch, I decided to pop in a DVD-R disc, and this was detected just fine. I also put in a DVD-RW disc, but it was not detected. Seeing as how I have data I want to append to an old DVD-RW disc, is there anything left to do?
View 12 Replies
View Related
Sep 30, 2006
I wanted to burn a CD and so I put the CD into the computer and opened up windows media but it can't detect the disk or the drive. I went to another burner and the same thing occured except this time I got a message saying the following: "There are no compatible CD drives reported."I then exited and popped in a disk for a game.. I hear the drive accept the disk and it sounds like it is about to load but nothing happens. Its like the cd drive is non functional. My question is what might have happened and can I fix this/ how?
View 13 Replies
View Related
Sep 19, 2005
I have a pc with 2 hardrives that has been working for quite a while now. One drive is IDE and another is a
sata drive. the sata drive has a partition in which windows xp is installed on. Now its time to format this computer and give it a fresh new start, but then I start the windows set-up from the boot disc it doesnt detect the sata drive.
View 6 Replies
View Related
Oct 6, 2007
I wanted to do is remove Vista from it and reinstall XP. I have already run DBAN (Darik's Boot and Nuke) to wipe the drive, but WinXP does not detect the drive. I have Windows XP Pro SP1. Now, I have tried the recovery CDs to ensure the drive has not been deemed unrecognisable from DBAN. It still is recognised, both in the BIOS and by the recovery software, but my XP CD doesn't even see it. What I was thinking of was slipstreaming SP2 into my CD. So I need to know two things:
1. Would doing that make any difference?
2. How do I go about slipstreaming SP2 onto my CD?
View 8 Replies
View Related
Aug 19, 2008
so i tried to fresh install windows and format my drives and when xp setup formats the drive and restarts it gives me this error tried alot of combinations of partitions but none work.
View 7 Replies
View Related
Feb 4, 2003
This is the problem I'm faced with and don't know what to do from here. After deleting current partition and then formatting in NTSF file system, it goes through the process of preparing for installation. When it reboots, it says the following:"couldn't open drive multi(0) disk(0) rdisk(0) partition(1)NTLDR: couldn't open drive multi(0) disk(0) rdisk(0) partition(1)"If I take the XP CD out it just has blank screen with blinking cursor in the top left corner.
View 11 Replies
View Related
