(*Get some free giggles out of M$'s definitions for a "system" and "boot" partition. Hint: the partition that is used to boot your machine is NOT called "boot", and the partition that holds your operating system is NOT called "system". http://support.microsoft.com/kb/314470)
View 4 Repliesmore precisely, what leads XP to decide what is removable and what isn't? Example: System 1 is a P4 built in a Shuttle SFF case with the provided MB; 1 SATA hard disk with three partitions, 1 DVD-ROM on PATA, 1 floppy on floppy channel, 1 multi-format flash reader on USB; the system sees two of the flash slots as removable storage. System 2 is an Athlon 64 built on an Epox Nvidia+ MB. 1 SATA hard disk (with two partitions), 1 SATA DVD-ROM (using a bridge adapter), 4 hard disks on PATA, 1 floppy on floppy channel, 1 multi-format flash reader on USB; the system sees _both_ SATA drives as being removable along with two of the flash slots. Either system properly sees an external hard disk on USB or Firewire as being removable.
View 2 Replies View RelatedI have just reinstalled XP Pro. I have a SATA hard drive and have to install drivers during install. I didn't install the drivers this time assuming they would still be in the system. Ever since XP thinks the hard drive is a removable drive. I tried reinstalling again but nothing.
View 3 Replies View RelatedI have a computer used for weekly backups that will utilize a removable hard drive that gets swapped out every week for offsite storage. In this case, I will have two of these removable hard drives, only one of which will be in use at any time, swapping in and out with each other every week.Since these hard drives will also contain the OS, how do I deal with XP licensing and authentication? Since there's only *one* computer, can I install and authorize a single copy of XP (Pro) on both removable hard drives? It seems unfair I would have to buy two copies of XP if only one is going to be used on the single computer at any given time.
View 30 Replies View RelatedI would like to use several removable hard drive bays on several PCs.Then have a hard drive with XP on it and take it with me to each machine as I need to. It does not need to hot-swap and I doubt I am breaching the Microsoft EULA because I could only use it on one PC at a time.I believe that the activation is based on points gathered from the items installed in each PC it is installed on and they would differ from PC to PC. Especially things like the NIC with it's own MAC address.
View 10 Replies View Relatedi am having problems with installing usb drive as it shows up in disk management but my computer won`t detect it anyone have any ideas how i can solve the problem i have a gigabyte ga-g31m-es2l motherboard,i am running windows xp 64 bit
View 1 Replies View RelatedLast Tuesday when I turned my computer on, I got the message ?A disk read error occurred, press crtrl+alt+delete to restart?. Since then I have been searching online for a way to get my computer back up & running.The specs of my computer:Dell Inspiron 9100 NotebookWindows XP Pro SP3P4 @ 3.2 Ghz w/ Hyper Threading1 gb Memory 160 gb Western Digital PATA/IDE HD (Replaced original 80 gb HD in May 08 b/c too small Removable internal DVD/CD-RW drive (& a removable internal floppy dis Purchased in Oct. 04.)
View 4 Replies View RelatedAll of a sudden my PC isn't finding a removable drive when i plug my camera into the USB port. I'm trying to copy pics from my digital camera and have always used the removable drive function in My Computer...now it's not working. other USB hardware (keyboard, mouse etc) are working fine. I've changed the cable, installed the camera driver disk, tried finding new hardware, and tried different USB ports to no avail.Camera is an Episilom 1.3 digital dreams and is working fine. Running Win XP SP2 on AMD Semprom 2800+ 2 GHz processor. Mobo is ASRock K7Upgrade-600
View 13 Replies View RelatedI have a Windows XP Pro box (named Shadow) with shares set for the root of each drive. I also have one external USB drive J:. I have used the Disk Manager, Add drive letters, to mount this drive as G:Shadow-J. I have set share for G:Shadow-J as Shadow-J. (I use this mount point approach to avoid the problem with the NET SHARE disappearing from J: when I turn off the drive.)From another machine, either one running XP Pro or a laptop running XP Home, I do NET USE for five different shares on Shadow. NET USE works fine for the shares for Shadow hard drives (C:, E:, F:, G but fails with error 1130 "Not enough server storage is available to proceess
View 1 Replies View RelatedHello Friends,I have problem regarding my hard disk!I have 2 hard disk's. 160gb segate barracuda (SATA) & 80gb segate barracuda (SATA).I was having windows vista. My computer was running smoothly that time with 2 hard disk's.I formatted my PC and installed windows xp.While installing windows xp i didn't connect my 80Gb hard disk.But after installation, when i tried to connect it , my computer started hanging.160Gb is my primary hdd and 80gb is secondary hard disk.I never had any OS on 80Gb. My computer hangs at windows xp boot screen.I tried at my friend's place also... tried all jumper settings also but no use. What could be the problem?
View 7 Replies View RelatedTrying to use the system recover cd.to try and repair windows xp pro. I get to the part where the screen is supposed to offer repair.My screen comes up showing partitions on the drive.It also says unknown disk but it lists the c: drive with 76246 MB and two other partitions.It just gives me the option to setup windows xp on the selected item or to select a different partition or delete a partition.I'm not getting the screen shown in the sticky.When i hit enter on the large partition it warned about installing two Operating System on the drive.Afraid to go farther,hoping I can save the files on the hard drive.
View 6 Replies View RelatedI need to install Windows XP on a laptop (Dell Latitude CPx H500GT) but I don't have the CD modular drive for it.How do I install XP with no built-in CD-ROM drive? The only other options I have is a ethernet PC card, one USB port and I do have a USB enclosure (for use with 3.5 hard drives or 5.25 cd/dvd drives)
View 8 Replies View RelatedI have an old HD From a system that I got rid of. I want to put it into a friends system to see if I can retrieve the files off of it and put it onto my external HD. The hard drive was the boot disk and the computer I am installing it on has it's own boot disk. If I boot up with two boot disks will there be a problem? Is there anything I need to take into account before doing this? I am planning on installing the old HD onto an ATA cable that I unplugged from the DVD drive. The HD that is in this system is not on an ATA cable, I'm not sure what it is connected to, just a small plug with a blue cable going to the mother board.
View 3 Replies View RelatedMy operating system is Windows XP Pro. As of yesterday all was fine, I even burned a DVD. Today "My Computer" isn't even showing my DVD/CD recorder, only showing Drive A: 3.5 Floppy. It started when I downloaded (I think) WindowsBlinds, just wanted to do some color changes. Well when I installed it, Norton came up with a Trojan. Norton Quarantined or deleted it and said no more further actions required. The install finished (windowblinds) and I tried a couple different skins and decided to uninstall it. Uninstalled with Revo Uninstaller
View 6 Replies View RelatedI have just bought and installed (to the point of completing initialization under Disk Management) a new 1 TB hard drive. Originally, I was planning to use it solely for data storage.However, I am thinking of installing Windows XP Pro and all the programs I currently use on it, thereby making it the new OS and programs drive, while using the original 120 GB HD as a data/backup drive.I think the main appeal of doing this, for me, is that it also presents an opportunity to reinstall Windows on a machine which hasn't had this done for more than three years, and which currently seems to take at least five minutes to boot to a "usable" state, despite having a reasonably high spec for its age (it was bought in 2001, but as a result of the upgrade
View 10 Replies View Relatednot being computer literate , i am having a problem with a new hard drive . i took out the old one . i have the windows disc and product codes , but i can't get it to boot to start the windows installation. i have done it on another computer , and the disc begins installing windows on start up. i have tried starting the computer with the disc in place , and without it . obviously , i must be missing something to get it started . the disc is brand new .
View 8 Replies View Relatedi have 2 hard drives with xp on them. one though only small works fine. the other (120gB ) will boot from cd or floppy but once xp is running all removable disk drives are " not available ". fixed drives (slave hard drives
are ok. it has not always been like this. does anyone have any ideas please?
Just discovered that along with Local Disk "C", DVD-RW "D" and "CD" E drive. I now have 4 new "Removable" drives FGHI. Dont know where they came from, but every time I start or re-start my PC the "SafelyRemove Hardware" icon appears in the right bottom of my screen. Cant get rid of it, and where did these removable drives come from???
View 4 Replies View RelatedCan you create a pagefile.sys on removable HDD's? I apparently cannot. I wanted to set an initial and max Pagefile amount of 500MB to 750MB each across all drives except C. Even though the system "seems" to have set the amount of space I allocated in the Virtual Memory section, it has created only ONE 500MB pagefile.sys on my H (fixed) drive. That amount is confirmed on the Advanced Tab for Performance Options section by the statement "Total Paging File For All Drives: 500". I have set a small initial and max amount of 2MB to 50MB on my system drive (C) which is recommended since you do not want a large swap file on the same HDD as your OS, but that does not show neither. Why did the system not create the other Swap Files? Does it have to need it before it creates it?
View 15 Replies View Relatedmy computer supplier has gone bust, ceased trading and is out of business. My Windows XP Pro is an OEM version. Is there anything I can do short of purchasing XP Pro again? I have just whacked in a new hard drive to the 'pooter. It seems far superior in many respects to the ones that came with the computer in the
first place. What I'd like to do is use tthe new drive as Windows disk C.
How to store all Windows, Office and program settings on a removable USB HDD, so I would be able to work with the same settings on two Windows XP with the removable USB HDD connected?
View 11 Replies View RelatedSee attached screen shot. The drives: E, F, G, H, are all parts of my multi-card reader. One is for MemoryStick, another is SD Cards, CompactFlash, etc. Would it be alright to rename these to something more recognizable at a glance? (for example, rename "Removable Disk (H)" to "SD Card") Or will it somehow mess up the way the drives read the cards?
View 1 Replies View RelatedI have a usb flash disk storage device and a flash mp3 player (usb) that will
not show up in windows explorer as Removable Disks. Both devices show up in
device manager as working correctly. I am running windows XP.
I'm creating this topic on behalf of a friend; basically, his CD drive, his ipod, and every removable storage device is no longer showing up within Windows XP after he recently installed a program called "u3". The drives do not show up in my computer or device manager. He has since removed the program to no avail. I've never had a problem like this so I'm unsure how to diagnose it
View 1 Replies View Relatedi have windows xp sp2 whenever i insert a pendrive my system does notshow the icon (removable disk) in the my computer window
View 7 Replies View Relatedway for me to install XP from an external DVD - USB drive I have no internal CD-ROM and need to get XP onto this machine somehow.
View 6 Replies View RelatedI am buying a new PC and was wodering what I have to do to install my existing hard drive in to my new computer. I was told the new install of XP will have problems with the old hard drive.
View 3 Replies View RelatedI have a Dell Dimension 2400 desktop computer that I want to install a 2nd hdd. My sister gave me her computer (which is the same exact as mine). Her's was hit by lightening, she thinks. The motherboard was fried. I'm wanting to use her 40gb hd as a 2nd hdd in my computer.My question is: Will I have to do a clean install on her hdd? I don't want to do anything that would damage my good drive.If I install her drive in my computer and make it a slave in the bios, will that be all I have to do?
View 8 Replies View RelatedI've been using imaging software for more years than I care to remember, with Windows and a couple of other vital programs (and those rotten Google programs that don't give you the option) on drive C and everything else is installed onto another partition - not automatically, I do a custom install and change the installation directory. I have 2 questions.
I've been restoring, updating and making a new working image every Sunday for over a year and it's time for a format and new install, partly because the image is getting too big. My OEM XP Pro CD is SP2 which obviously will go onto drive C. I've downloaded SP3 and dotnetfx35 - will I come across any problems if I install them onto drive D? Seems logical that I won't, but what is logical when it comes to Microsoft? If this is possible, it seems reasonable that I can move all of those update files held in the Windows directory to the same location where I install the two big files, which should cut down on a lot of space on drive C over time...............
I been haveing trouble installing xp pro on my hard drive. I am able to get through the windows install, computer reboots then starts the process all over again starting from the blue screen.I've tried setting the cdrom as the first bootable drive but this does not do the trick.my pins are correct on my 160 gig drive. I don't know what else to do.
View 19 Replies View RelatedI was just installing XP on a 10 GB hard drive. When I was installing it it told me all other data etc would be los I said ok etc. After the install I see the C drive is almost full at 7.93 GB. Is this how much XP takes up? I did not think it would take up so much space. This is not my computer so I am not about to change the hd
View 14 Replies View Related