Can't Run Disk Error Check - Ntfs File System Not Open
Jun 22, 2005
A week after updating to most current Windows SP1critical updates (its only change I can think of) I happen to notice that I cannot run a disk error check, I am told that its a NTFS file system and Win cannot open volume for check. Also when I start computer I have to log on with my password every. I have tried to eliminate the password requirement to no avail. I cannot return to pre-update status with System Restore because its been a week and there is too much new data in the system. This is a free standing desktop PC. Can anyone help with these two things? I hope so as I do my error check regularly and find it frustrating to have to log on every time I restart .
View 8 Replies
ADVERTISEMENT
Apr 10, 2006
Computer is suddenly running chk disk at bootup - anyone know why that would suddenly start to happen. I don't know how to even enable it - and really want to disable it. How do I do that? No errors are reported when it finishes. Also if I go to error checking when windows finally boots, it won't run because certain system files cannot be accessed.
View 9 Replies
View Related
Sep 20, 2005
When left for a while (about half an hour), I come back to it and see that the screen is black with something about a system disk error. I experienced this before I had to re-install windows a few weeks back.The first time, I pressed enter, and the system started up fine. The second time, the secondary loading screen (that's what I call it...it's like little white rectangles at the bottom of a black screen...you know the ne, right?). Well yeah that goes really really slow. When it get's a few inches in, it stops and tells me 'system32driverstfs.sys is missing or corrupt'.
View 1 Replies
View Related
Jan 14, 2009
I am running Windows XP Homedition. I have two drives inside, the regular C: drive and I have a Slave drive F: with all my photos and music and documents. The problem I'm having is that everytime I restart or reboot my system it say it needs to check F: drive for consistency. It haven't been doing that until now. Then once it goes through that the system comes up. I try to click on an icon like my internet or registry program, nothing comes up, its like a read only file or something. Its not executing the program. THEN all of a sudden I get a blue screen. It says this::"Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacture for driver updates. try changing video adapters. "Check with your hardware vendor for aany BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use SAFE mode to remove or disable components, restart your computer, press F8 to select Advance SStartup options, and then select Safe Mode."
View 1 Replies
View Related
Mar 8, 2006
my computer at the start up screen runs the check disk tool from windows.It should only try to run the tool once but when it starts up it says connot open or access the ntfs file.Also I tried to start my computer in safe mode today and it pulled upall the way to the black page where it displays the file names but it froze and never went any farther.
View 2 Replies
View Related
Feb 11, 2006
Last night I set my computer to check and repair the disc. I have done it many times before successfully. But when I rebooted I got the message "Cannot open volume for direct access Windows is finished checking the disk" Then windows starts up. How do I fix this?
View 9 Replies
View Related
May 11, 2007
At startup Windows XP always suggested to run disk check and after I let it the whole partirion(most of it) is unreadable. The files are there but they are simply unreadable. For instance, I cannot open pictures or open MP3s. Like the content of the files has been messes up
View 2 Replies
View Related
Feb 5, 2003
when i run chdisk for errors in win 2000 by right clicking the hard drive icon and then clicking properties of c: harddrive, then tools tab, then click the check now button, and in the check disk options ticking "automatically fix file system errors" and clicking ok I get this message "The disk check could not be performed because exclusive access to the drive could not be obtained. Do you want to schedule the disk check to occur the next time you restart the computer."If i chose yes to that above it performs the diskcheck at reboot and when windows loads i go back to the checkdisk and i get the same problem again.
View 3 Replies
View Related
Dec 1, 2005
I always have errors reported on my hard drive, even after chkdsk /f and /f/r."Freespace marked as allocated in the volume bitmap". Why does it never go away? Windows XP Pro with all of the updates. Machine runs fine.
View 6 Replies
View Related
Sep 14, 2005
For a whole month now I have carefully set up the new notebook described below after successfully, but laboriously, running a 1997 Dell PII300-SCSI 128-SDRAM Win98SE system for 8 years. I've now reached a point where I need help on several issues from some of you who are far ahead of me when it comes to running a modern system. There are no major problems so far, just some minor performance issues and a few questions in areas in which I know little or nothing.
One instance of a freeze (when running Norton Speed Disk) which turned out to be a bad cluster and was repaired by ChkDsk. One instance of stalling @ the "windows is shutting down" window (shutdown only). There have been two instances of noticeable decline in peak performance: A.) after installing Norton System Works. I immediately uninstalled Go Back, which really helped, and B.) after replacing one of the installed 256mb sticks of RAM with a 1GB stick from Crucial. I only mention this because I deliberately delayed installation until maximium system performance had been consistently sustained. [This is nothing major, just a slight delay and/or menus briefly going blank when starting some programs and a slight delay in application reaction time, which usually manifests itself at the start of sessions, and late sluggishness in long sessions] I only mention this in the event that I'm wrong and can be corrected, because I believe this must be a coincidence and not due to the hardware (unless there is a setting or something in Windows that needs changing to accommodate the additional RAM) - and the solution to regaining peak performance lies in Windows and/or Norton System Works....
View 8 Replies
View Related
Feb 23, 2006
For the past two weeks, when I start or restart my Dell Dimension 8250 running Windows XP Home Edition, it passes through a blue page with a Windows label that says: "Checking the file system on C; The type of file is NTFS; Cannot open volume for direct access; Windows has finished checking the disk." Otherwise the computer seems to start up normally and operate as usual. Something has changed and I don't know what the problem may be.
View 14 Replies
View Related
Jul 10, 2010
Everytime I boot Windows, I get a message saying that I should allow check disk to run. However, if I let it go through, it will never complete. After about 27%, I get another message for about 1 second that I can't read. All I get out of it is that windows incurred a problem and then it disappears to start the same process over again. I can't run check disk from windows, either. If I just cancel it, everything boots up as normal.
View 14 Replies
View Related
Sep 10, 2005
Any strong views on the advisability of converting a FAT32 drive to NTFS, after upgrading from Win98se to WinXP Pro? And perhaps a word on the best and safest method to use if implementing this
View 3 Replies
View Related
Dec 25, 2007
It's a shame that me did a grave error. I am in terrible shock for that I did the following:
a) Installed Sun Solaris Express x86 Developer Edition with a 7.5 GB partition.
b) There is Windows XP SP2 on the first 20 GB partition.
I wanted to toggle boot flag by using DOS based fdisk after the Solaris installation. That's where me screwed up I ran a bootable Russian language DOS tools. Instead of toggling the boot flag (option 2 in the fdisk), me accidentally (while taking an overseas call) selected (option 1) the FAT formatting the existing NTFS partition (fdisk ran for 1%, then me immediately stopped and rebooted. But, already damage done My NTFS got screwed up by me.....
View 10 Replies
View Related
Jun 29, 2005
I don't know how this happened. But when I went to my D drive which is My Documents, the drive was empty. Though when I check the drive properties it shows that 18G is being used, plus it's showing that the file system is RAW. Not sure how it got that way because it should be NTFS. I am able to view My Pictures and My Music by viewing from the start menu and going to My Pictures or My Music, but when I go to My Documents it's empty.
Now my question is how do I recover those missing files? I'm assuming that they are around because My Pictures and My Music are two of the files that are in my documents folder. This just leaves 25% of the drive I can't view. I can't do system restore because I don't have the D drive being monitored, so I can't do that. I did a virus scan and a spyware scan and the system is clean. Another thing I noticed is if I try to save something to the D drive it will appear to be the only item on the drive, but when I click refresh it will vanish.
View 8 Replies
View Related
Dec 9, 2004
Can anyone advise me on formating or reformating my hard drive. I am running windows xp pro and have a 20 gb maxtor hard drive. This is formatted as NTFS as one partition. I tried from windows explore and from my computer. I also tried to change to 32 bit partition. Can I do this with fdisk, if so how?
View 11 Replies
View Related
Jan 6, 2007
Hope I'm in the right category. I'm using an Acer Intel Celeron D, Win XP (Home Edition) and my file system is FAT 32. I've heard that NTFS is superior and I am thinking of converting it. I understand that once converted, it is irrevisible. Should I convert it to NTFS and in what way is it better than FAT 32.
View 5 Replies
View Related
Dec 16, 2004
How to convert a NTFS file system to FAT32
View 14 Replies
View Related
Oct 18, 2004
To convert your drive or partition from fat32 to ntfs, type the following at Start Run (assuming it's drive c:): CONVERT C: /FS:NTFS. If you are asked if you want to dismount the drive, you must answer yes. Alternatively, you can use a utility such as Partition Magic.
View 9 Replies
View Related
Apr 23, 2005
Just bought a maxter 300 gb usb high speed 16mb cache.It would work when i pluged it in..So i formated it. and it works fine now.But i noticed it says it is on 279.47 gb in free space after formating.Is this normal? over 20 gb lost seems high to meMy 160 gb USB 2.0 xternial is 152.66 gb.I formated like my other USB hD and my 2 internial ones both 120 GB, they have 111.78 in them.Layout Partition Type Basic File system NTFS
View 4 Replies
View Related
Aug 2, 2005
So what's my question - how can I convert my file system from FAT32 to NTFS and re-install my XP using the recovery disks?
View 11 Replies
View Related
Apr 21, 2008
A few days ago I noticed that when I tried to play a video file that I downloaded with VLC, it actually opened another video file on that hard drive (500GB Seagate, partition G: used for video files) instead of the one I selected. It had played fine earlier, so something must have happened to cause the file system to point to the wrong file.
I didn't pay too much attention to it at first, but then this morning I noticed that this wasn't the only occurrence of this weird error. When I tried to play a podcast episode with iTunes which is located on another partition and another hard drive (320GB Seagate, partition H: used for music files) it *also* was pointing to another music file on that same hard drive. Because this struck me as very odd I tried opening other files on these partitions. Some opened the right file, some opened wrong ones. I've done a chkdsk on both partitions. On the H: partition it did fix some errors, but G: seemed to be fine. Nevertheless, the problem remained. I've tried to google for this problem, but I'm having trouble finding a good search term. I've never had a problem like this before, so I'm unfamiliar with the terminology that might be used to document this problem.
View 5 Replies
View Related
Sep 10, 2010
I have done analysis of my PC with Microsoft Baseline Security Analyzer (see image) and it tells me I should convert my D drive into NTFS. Is it safe ? Can I do it without loosing any data ? How can I do it?
View 14 Replies
View Related
May 5, 2004
Last access time stampsXP automatically updates the date and time stamp with information about the last time you accessed a file. Not only does it mark the file, but it also updates the directory the file is located in as well as any directories above it. If you have a large hard drive with many subdirectories on it, this updating can slow down your system.To disable the updating, start the Registry Editor by selecting Run from the Start menu, typing regedit in the Open text box, and clicking OK.
When the Registry Editor window opens, navigate through the left pane until you get to HKEY_LOCAL_MACHINESYSTEMCurrentControl SetControlFilesystemIn the right pane, look for the value named NtfsDisableLastAccessUpdate. If the value exists, it's probably set to 0. To change the value, double-click it. You'll then see the Edit DWORD Value screen. Enter 1 in the Value Data field and click OK.If the value doesn't exist, you'll need to add it. Select New | DWORD Value from the Edit menu.
View 9 Replies
View Related
Feb 28, 2008
WinExplorer -> right click C: -> go to properties -> go to tools click error check. Will get message that error check will start at the next start up. Problem. Error check runs fine, and makes 5 checks. At the 5th check at about 98% you better be there and when it hits 100% be a quick reader so you can see if there are any bad clusters. The screen stays there about 3 seconds and then disappears. If you have bad clusters the HD might be going bad. Question. How can I make the Error Check summary screen stay put while I read it or how can I make it "log" someplace where I can go and read it at my leisure?
View 11 Replies
View Related
Oct 23, 2009
How do change the file system from FAT32 to NTFS without using the command menu?
View 1 Replies
View Related
Aug 7, 2005
My old m/b got fried, so i changed to another m/b and used the same hd for it, and i reinstalled windows XP after deleting the previous, but now when i'm trying to access a folder or file, i get this error "Document may be write protected or encrypted", i really need to open this file, how can i overcome this error?
View 3 Replies
View Related
Aug 12, 2008
Could anyone explain to me the difference between doing an error check at boot up and doing a scannow check.
View 4 Replies
View Related
Aug 22, 2007
I got a computer from my boss that had a bad motherboard and processor, i put a new in it and now im trying to format the hd but it has xp on it and has a password, my boss forgot what it was so im trying to format it from dos i wrote "format c:" and it says
"The type of the file system is NTFS. Enter current volume lable for drive C:
View 4 Replies
View Related
Aug 27, 2005
I usually backup my weeks work on Friday afternoons. What I do is run a "search" for all files created or modified within the last 7 days and then "copy" all relevant files to a folder on an external hard drive, and then burn a CD.
Everynow and then, I get the following message. "Cannot Copy File: Cannot Read From the Source File or Disk"
View 1 Replies
View Related
Apr 7, 2007
how do i get rid of this message that i have been getting when i try to open Local Disk ( c: ). its a pop-up from Windows Script Host, and the message says, "Can not find script file C:/maskrider2001.vbs."
View 7 Replies
View Related
